Haihui Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Haihui Yu has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Li Kong
Institute of Petrochemical Technology, Jilin Institute of Chemical Technology, Jilin 132022, China
4 shared publications Jubo Huang
3 shared publicationsLiu Yang
3 shared publicationsMingyu Zhao
3 shared publicationsBing Wei
Electric Power Research Institute, State Grid Heilongjiang Electric Power Co., Ltd., Harbin, People’s Republic of China
2 shared publicationsChaobo Xue
2 shared publications
Latest Publications
- Open Access
- 24 October 2026
- Published by Elsevier in SSRN Electronic Journal
Mixed-addenda SiW9Mo3 POM-Sensitized Magnetic Co3O4 with Tailored Spin Texture: Synergistic Effect of Spin Polarization and Lattice Tunable
Conventional polyoxometalate (POM) and transition metal oxide photocatalysts suffer from intrinsic bottlenecks including inefficient electronic structure modulation, rapid carrier recombination and lack of effective spin regulation. Herein, a magnetically responsive Co3O4/SiW9Mo3 direct Z-scheme heterojunction was rationally constructed via hydrothermal assembly, with a focus on the lattice regulation, spin polarization engineering, interfacial electronic modulation and band structure optimization. Systematic characterizations and spin-polarized density functional theory (DFT) calculations were performed to reveal the structure-electronic property relationships. The results indicate that SiW9Mo3 polyoxoanions precisely regulate the coordination environment of Co in Co3O4. The optimized Co2+ sites break the spin degeneracy near the Fermi level and trigger intrinsic spin polarization via strong exchange splitting, while the work function difference between Co3O4 and SiW9Mo3 drives directional interfacial charge transfer and stabilizes the Z-scheme charge migration pathway. Moreover, an external magnetic field further amplifies the spin polarization effect, accelerates spin-polarized charge transport and suppresses carrier recombination. DFT calculations verify that crystal field regulation reshapes the density of states, enhances d-p orbital hybridization and optimizes the built-in electric field at the heterojunction interface. This work provides a controllable regulation strategy for magnetic POM-based heterojunctions, offering a theoretical and experimental basis for designing spin-polarized catalytic materials.
- 24 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMixed-addenda SiW9Mo3 POM-Sensitized Magnetic Co3O4 with Tailored Spin Texture: Synergistic Effect of Spin Polarization and Lattice Tunable
Conventional polyoxometalate (POM) and transition metal oxide photocatalysts suffer from intrinsic bottlenecks including inefficient electronic structure modulation, rapid carrier recombination and lack of effective spin regulation. Herein, a magnetically responsive Co3O4/SiW9Mo3 direct Z-scheme heterojunction was rationally constructed via hydrothermal assembly, with a focus on the lattice regulation, spin polarization engineering, interfacial electronic modulation and band structure optimization. Systematic characterizations and spin-polarized density functional theory (DFT) calculations were performed to reveal the structure-electronic property relationships. The results indicate that SiW9Mo3 polyoxoanions precisely regulate the coordination environment of Co in Co3O4. The optimized Co2+ sites break the spin degeneracy near the Fermi level and trigger intrinsic spin polarization via strong exchange splitting, while the work function difference between Co3O4 and SiW9Mo3 drives directional interfacial charge transfer and stabilizes the Z-scheme charge migration pathway. Moreover, an external magnetic field further amplifies the spin polarization effect, accelerates spin-polarized charge transport and suppresses carrier recombination. DFT calculations verify that crystal field regulation reshapes the density of states, enhances d-p orbital hybridization and optimizes the built-in electric field at the heterojunction interface. This work provides a controllable regulation strategy for magnetic POM-based heterojunctions, offering a theoretical and experimental basis for designing spin-polarized catalytic materials.
- Open Access
Controllable Synthesis, Photocatalytic Property, and Mechanism of a Novel POM-Based Direct Z-Scheme Nano-Heterojunction α-Fe2O3/P2Mo18
In order to improve photocatalytic activity and maximize solar energy use, a new composite material Fe2O3/P2Mo18 was prepared by combining polyoxometalates (P2Mo18) with Fe2O3 nanosheets. FT-IR, XRD, XPS, SEM, TEM, UV-vis, EIS, and PL were used to characterize the composite material, and nano-Fe2O3 of different sizes and morphologies with a controllable absorption range was prepared by adjusting the reaction time, and, when combined with P2Mo18, a composite photocatalyst with efficient visible light response and photocatalytic activity was constructed. The EIS, Bode, and PL spectra analysis results show that the Fe2O3/P2Mo18 composite material has outstanding interfacial charge transfer efficiency and potential photocatalytic application possibilities. Model reactions of methylene blue (MB) and Cr (VI) photodegradation were used to evaluate the redox activity of Fe2O3/P2Mo18 composites under simulated visible light. The photocatalytic degradation rate was as high as 98.98% for MB and 96.86% for Cr (VI) when the composite ratio was Fe2O3/P2Mo18-5%. This research opens up a new avenue for the development of high-performance photocatalysts.
Open AccessControllable Synthesis, Photocatalytic Property, and Mechanism of a Novel POM-Based Direct Z-Scheme Nano-Heterojunction α-Fe2O3/P2Mo18
In order to improve photocatalytic activity and maximize solar energy use, a new composite material Fe2O3/P2Mo18 was prepared by combining polyoxometalates (P2Mo18) with Fe2O3 nanosheets. FT-IR, XRD, XPS, SEM, TEM, UV-vis, EIS, and PL were used to characterize the composite material, and nano-Fe2O3 of different sizes and morphologies with a controllable absorption range was prepared by adjusting the reaction time, and, when combined with P2Mo18, a composite photocatalyst with efficient visible light response and photocatalytic activity was constructed. The EIS, Bode, and PL spectra analysis results show that the Fe2O3/P2Mo18 composite material has outstanding interfacial charge transfer efficiency and potential photocatalytic application possibilities. Model reactions of methylene blue (MB) and Cr (VI) photodegradation were used to evaluate the redox activity of Fe2O3/P2Mo18 composites under simulated visible light. The photocatalytic degradation rate was as high as 98.98% for MB and 96.86% for Cr (VI) when the composite ratio was Fe2O3/P2Mo18-5%. This research opens up a new avenue for the development of high-performance photocatalysts.
- 13 May 2023
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 39 (5) , 782-789
Introduction and Influence of Water in the Preparation of Crosslinked PVC Foam by Isocyanate
- 13 May 2023
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 39 (5) , 782-789
Introduction and Influence of Water in the Preparation of Crosslinked PVC Foam by Isocyanate
- Open Access
Luminescent Properties and Charge Compensator Effects of SrMo0.5W0.5O4:Eu3+ for White Light LEDs
The high-temperature solid-phase approach was used to synthesize Eu3+-doped SrMo0.5W0.5O4 phosphors, whose morphological structure and luminescence properties were then characterized by XRD, SEM, FT-IR, excitation spectra, emission spectra, and fluorescence decay curves. The results reveal that the best phosphor synthesis temperature was 900 °C and that the doping of Eu3+ and charge compensators (K+, Li+, Na+, NH4+) had no effect on the crystal phase change. SrMo0.5W0.5O4:Eu3+ has major excitation peaks at 273 nm, 397 nm, and 464 nm, and a main emission peak at 615 nm, making it a potential red fluorescent material to be used as a down converter in UV LEDs (273 nm and 397 nm) and blue light LEDs (464 nm) to achieve Red emission. The emission spectra of Sr1−yMo0.5W0.5O4:yEu3+(y = 0.005, 0.01, 0.02, 0.05, 0.07) excited at 273 were depicted, with the Eu3+ concentration increasing the luminescence intensity first increases and then decreases, the emission peak intensity of SrMo0.5W0.5O4:Eu3+ achieves its maximum when the doping concentration of Eu3+ is 1%, and the critical transfer distance is calculated as 25.57 Å. When various charge compensators such as K+, Li+, Na+, and NH4+ are added to SrMo0.5W0.5O4:Eu3+, the NH4+ shows the best effect with the optimal doping concentration of 3wt%. The SrMo0.5W0.5O4:Eu3+,NH4+ color coordinate is (0.656,0.343), which is close to that of the ideal red light (0.670,0.333).
Open AccessLuminescent Properties and Charge Compensator Effects of SrMo0.5W0.5O4:Eu3+ for White Light LEDs
The high-temperature solid-phase approach was used to synthesize Eu3+-doped SrMo0.5W0.5O4 phosphors, whose morphological structure and luminescence properties were then characterized by XRD, SEM, FT-IR, excitation spectra, emission spectra, and fluorescence decay curves. The results reveal that the best phosphor synthesis temperature was 900 °C and that the doping of Eu3+ and charge compensators (K+, Li+, Na+, NH4+) had no effect on the crystal phase change. SrMo0.5W0.5O4:Eu3+ has major excitation peaks at 273 nm, 397 nm, and 464 nm, and a main emission peak at 615 nm, making it a potential red fluorescent material to be used as a down converter in UV LEDs (273 nm and 397 nm) and blue light LEDs (464 nm) to achieve Red emission. The emission spectra of Sr1−yMo0.5W0.5O4:yEu3+(y = 0.005, 0.01, 0.02, 0.05, 0.07) excited at 273 were depicted, with the Eu3+ concentration increasing the luminescence intensity first increases and then decreases, the emission peak intensity of SrMo0.5W0.5O4:Eu3+ achieves its maximum when the doping concentration of Eu3+ is 1%, and the critical transfer distance is calculated as 25.57 Å. When various charge compensators such as K+, Li+, Na+, and NH4+ are added to SrMo0.5W0.5O4:Eu3+, the NH4+ shows the best effect with the optimal doping concentration of 3wt%. The SrMo0.5W0.5O4:Eu3+,NH4+ color coordinate is (0.656,0.343), which is close to that of the ideal red light (0.670,0.333).