Azam Nadali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Azam Nadali has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Amir Hossein Mahvi
Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
2 shared publications - Mostafa Leili
Department of Environmental Health Engineering, School of Public Health and Research Center for Health Sciences, Hamadan University of Medical Sciences, Hamadan, Iran
2 shared publications - Abbas Afkhami
Department of Analytical Chemistry, Faculty of Chemistry and Petroleum Sciences, Bu-Ali Sina University, Hamedan, 6517838695, Iran
1 shared publication - Abdulrahman Bahrami
Center of Excellence for Occupational Health, Occupational Health and Safety Research Center, School of Public Health, Hamadan University of Medical Sciences, Hamadan, Iran
1 shared publication Afsaneh Naghibi
Department of Environmental Health Engineering, Vice-Chancellor in Health Affairs, Hamadan University of Medical Sciences, Hamadan, Iran
1 shared publication- Ahmad Reza Yari
Research Center for Environmental Pollutants, Qom University of Medical Sciences, Qom, Iran
1 shared publication
Latest Publications
- Open Access
- 1 December 2025
- Published by InkVista Publishing House in Journal of Environmental Health Engineering
- Vol. 13 (3) , 268-281
Photocatalytic degradation of the 2,4-dichlorophenoxyacetic acid in aqueous media using Fe2O3/Mn3O4 nanoparticles combined with sodium persulfate activation under ultraviolet irradiation
Background: The toxicity and persistence of 2,4-dichlorophenoxyacetic acid (2,4-D) lead to its entry into water resources, raising health concerns. This study evaluated the efficiency of a photocatalytic process using Fe₂O₃/Mn3O4 and sodium persulfate (PS) activation under ultraviolet irradiation for removing this contaminant. Materials and Methods: In this experimental study, Mn₃O₄ and ...
- 1 December 2025
- Published by InkVista Publishing House in Journal of Environmental Health Engineering
- Vol. 13 (3) , 268-281
Open AccessPhotocatalytic degradation of the 2,4-dichlorophenoxyacetic acid in aqueous media using Fe2O3/Mn3O4 nanoparticles combined with sodium persulfate activation under ultraviolet irradiation
Background: The toxicity and persistence of 2,4-dichlorophenoxyacetic acid (2,4-D) lead to its entry into water resources, raising health concerns. This study evaluated the efficiency of a photocatalytic process using Fe₂O₃/Mn3O4 and sodium persulfate (PS) activation under ultraviolet irradiation for removing this contaminant. Materials and Methods: In this experimental study, Mn₃O₄ and ...
- 25 May 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (38) , 53653-53667
Short-term effect of multi-pollutant air quality indexes and PM2.5 on cardiovascular hospitalization in Hamadan, Iran: a time-series analysis
Air pollutants are the most important environmental factors that contributed to cardiovascular disease (CVD). The present study aimed to investigate the number of hospitalization due to heart failure (HF) and myocardial infarction (MI) following the air pollutant exposure using a time-series regression analysis with a distributed lag model in Hamadan, Iran (2015-2019). A total of 2091 cases of CVD were registered. Based on the findings, the highest health effects on HF hospitalization were observed with air quality health index (AQHI) at lag 9 (RR = 1.043, 95% CI 0.991-1.098), and air quality index (AQI) at lags 2, 7, and 9 (RR = 1.001, 95% CI 0.998-1.002), for an increase in 1 unit of the indexes, and with PM2.5 at lag 0 (RR = 1.001, 95% CI 0.996-1.004) for 10 μg/m3 increase in PM2.5 levels. The highest health effects on MI hospitalization were calculated with AQHI at lag 10 (RR = 1.059, 95% CI 1.001-1.121) and AQI at lags 1 and 2 (RR = 1.001, 95% CI 0.998-1.002), for an increase in 1 unit of the indexes, and with PM2.5 at lag 8 (RR = 1.002, 95% CI 0.997-1.005) for 10 μg/m3 increase in PM2.5 levels. According to a seasonal classification, results showed that hospitalization in the warm season was higher than that of the cold season. Based on our knowledge, the current study is the first study that investigated the effect of air quality indexes on hospitalization due to HF and MI in Iran. Findings can provide basic information to plan preventive measures for reducing exposure chance and hospitalization rate in high-risk people.
- 25 May 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (38) , 53653-53667
Short-term effect of multi-pollutant air quality indexes and PM2.5 on cardiovascular hospitalization in Hamadan, Iran: a time-series analysis
Air pollutants are the most important environmental factors that contributed to cardiovascular disease (CVD). The present study aimed to investigate the number of hospitalization due to heart failure (HF) and myocardial infarction (MI) following the air pollutant exposure using a time-series regression analysis with a distributed lag model in Hamadan, Iran (2015-2019). A total of 2091 cases of CVD were registered. Based on the findings, the highest health effects on HF hospitalization were observed with air quality health index (AQHI) at lag 9 (RR = 1.043, 95% CI 0.991-1.098), and air quality index (AQI) at lags 2, 7, and 9 (RR = 1.001, 95% CI 0.998-1.002), for an increase in 1 unit of the indexes, and with PM2.5 at lag 0 (RR = 1.001, 95% CI 0.996-1.004) for 10 μg/m3 increase in PM2.5 levels. The highest health effects on MI hospitalization were calculated with AQHI at lag 10 (RR = 1.059, 95% CI 1.001-1.121) and AQI at lags 1 and 2 (RR = 1.001, 95% CI 0.998-1.002), for an increase in 1 unit of the indexes, and with PM2.5 at lag 8 (RR = 1.002, 95% CI 0.997-1.005) for 10 μg/m3 increase in PM2.5 levels. According to a seasonal classification, results showed that hospitalization in the warm season was higher than that of the cold season. Based on our knowledge, the current study is the first study that investigated the effect of air quality indexes on hospitalization due to HF and MI in Iran. Findings can provide basic information to plan preventive measures for reducing exposure chance and hospitalization rate in high-risk people.
- Open Access
- 1 December 2019
- Published by International Society for Phytocosmetic Sciences
- Vol. 19 (1) , e00441
The Assessment of Trihalomethanes Concentrations in Drinking Water of Hamadan and Tuyserkan Cities, Western Iran and Its Health Risk on the Exposed Population
Background: The aim of the present study was to calculate and to assess the potential lifetime cancer risks for trihalomethanes from consuming chlorinated drinking water in Hamadan and Tuyserkan cities, western Iran in 2016-2017. Study design: A cross-sectional study. Methods: Seventy-two water samples were collected from the distribution systems and from the outlet of water treatment plants (WTPs) and the experiments were carried out to determine the desired parameters. All the sampling and measurement methods were according to Standard Methods. The obtained data were analyzed using SPSS software. Results: The mean concentration of total THMs in the summer and winter was 42.75 and 17.75 mu g/L, respectively, below the WHO and Iranian standard. The positive correlation was observed between temperature and THMs levels. Moreover, THMs concentration in Shahid Beheshti's WTP was several times lower than in Ekbatan's WTP. Chloroform, the dominant species of THMs, was identified at different sampling points. The highest cancer risk in Hamadan was 1.4x10(-5) and 4.8x10(-5) for male and female, respectively; and the cancer risk was obtained to be 5.6x10(-7)-2.26x10(-6) in Tuyserkan. Conclusion: The drinking water obtained from the studied area is safe in terms of THMs concentration. Nevertheless, the highest cancer risk was higher than the EPA's acceptable level of 10(-6).
- 1 December 2019
- Published by International Society for Phytocosmetic Sciences
- Vol. 19 (1) , e00441
Open AccessThe Assessment of Trihalomethanes Concentrations in Drinking Water of Hamadan and Tuyserkan Cities, Western Iran and Its Health Risk on the Exposed Population
Background: The aim of the present study was to calculate and to assess the potential lifetime cancer risks for trihalomethanes from consuming chlorinated drinking water in Hamadan and Tuyserkan cities, western Iran in 2016-2017. Study design: A cross-sectional study. Methods: Seventy-two water samples were collected from the distribution systems and from the outlet of water treatment plants (WTPs) and the experiments were carried out to determine the desired parameters. All the sampling and measurement methods were according to Standard Methods. The obtained data were analyzed using SPSS software. Results: The mean concentration of total THMs in the summer and winter was 42.75 and 17.75 mu g/L, respectively, below the WHO and Iranian standard. The positive correlation was observed between temperature and THMs levels. Moreover, THMs concentration in Shahid Beheshti's WTP was several times lower than in Ekbatan's WTP. Chloroform, the dominant species of THMs, was identified at different sampling points. The highest cancer risk in Hamadan was 1.4x10(-5) and 4.8x10(-5) for male and female, respectively; and the cancer risk was obtained to be 5.6x10(-7)-2.26x10(-6) in Tuyserkan. Conclusion: The drinking water obtained from the studied area is safe in terms of THMs concentration. Nevertheless, the highest cancer risk was higher than the EPA's acceptable level of 10(-6).
- Open Access
- 24 May 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (28) , 16083-16094
Ultrasound-assisted sorption of Pb( ii ) on multi-walled carbon nanotube in presence of natural organic matter: an insight into main and interaction effects using modelling approaches of RSM and BRT
In real-scale applications, where NPs are injected into the aqueous environment for remediation, they may interact with natural organic matter (NOM). This interaction can alter nanoparticles' (NPs) physicochemical properties, sorption behavior, and even ecological effects. This study aimed to investigate sorption of Pb(II) onto multi-walled carbon nanotube (MWCNT) in presence of NOM. The predominant behavior of the process was examined comparatively using response surface methodology (RSM) and boosted regression tree (BRT)-based models. The influence of four main effective parameters, namely Pb(II) and humic acid (HA) concentrations (mg L−1), pH, and time (min) on Pb removal (%) was evaluated by contributing factor importance rankings (BRT) and analysis of variance (RSM). The applicability of the BRT and RSM models for description of the predominant behavior in the design space was checked and compared using statistics of absolute average deviation (AAD), mean absolute error (MAE), root mean square error (RMSE), and multiple correlation coefficient (R2). The results showed that although both approaches exhibited good performance, the BRT model was more precise, indicating that it could be a powerful method for the modeling of NOM-presence studies. Importance rankings of BRT displayed that the effectiveness order of the studied parameters is pH > time > Pb(II) concentration > HA concentration. Although HA concentration showed the least effect in comparison with three other studied parameters theoretically, the experimental results revealed that Pb(II) removal is enhanced in presence of HA (73% vs. 81.77%), which was confirmed by SEM/EDX analyses. Hence, maximum removal (R% = 81.77) was attained at an initial Pb(II) concentration of 9.91 mg L−1, HA concentration of 0.3 mg L−1, pH of 4.9, and time of 55.2 min.
- 24 May 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (28) , 16083-16094
Open AccessUltrasound-assisted sorption of Pb( ii ) on multi-walled carbon nanotube in presence of natural organic matter: an insight into main and interaction effects using modelling approaches of RSM and BRT
In real-scale applications, where NPs are injected into the aqueous environment for remediation, they may interact with natural organic matter (NOM). This interaction can alter nanoparticles' (NPs) physicochemical properties, sorption behavior, and even ecological effects. This study aimed to investigate sorption of Pb(II) onto multi-walled carbon nanotube (MWCNT) in presence of NOM. The predominant behavior of the process was examined comparatively using response surface methodology (RSM) and boosted regression tree (BRT)-based models. The influence of four main effective parameters, namely Pb(II) and humic acid (HA) concentrations (mg L−1), pH, and time (min) on Pb removal (%) was evaluated by contributing factor importance rankings (BRT) and analysis of variance (RSM). The applicability of the BRT and RSM models for description of the predominant behavior in the design space was checked and compared using statistics of absolute average deviation (AAD), mean absolute error (MAE), root mean square error (RMSE), and multiple correlation coefficient (R2). The results showed that although both approaches exhibited good performance, the BRT model was more precise, indicating that it could be a powerful method for the modeling of NOM-presence studies. Importance rankings of BRT displayed that the effectiveness order of the studied parameters is pH > time > Pb(II) concentration > HA concentration. Although HA concentration showed the least effect in comparison with three other studied parameters theoretically, the experimental results revealed that Pb(II) removal is enhanced in presence of HA (73% vs. 81.77%), which was confirmed by SEM/EDX analyses. Hence, maximum removal (R% = 81.77) was attained at an initial Pb(II) concentration of 9.91 mg L−1, HA concentration of 0.3 mg L−1, pH of 4.9, and time of 55.2 min.
- 2 May 2018
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 110 (1) , 74-80
Adsorption of cationic dye textile wastewater using Clinoptilolite: isotherm and kinetic study
The releasing of dye-contained effluents has become an objectionable problem in these decades. Thus, the aim of the present work was to evaluate the potential of the acid-treated Clinoptilolite for Methylene Blue (MB) dye removal from aqueous solution. In this experimental-lab study, the dye adsorption onto acid-treated Clinoptilolite was carried out in batch adsorption system. Brunauer-Emmet-Teller (BET) analysis, Scanning Electron Microscopy (SEM), XRF analysis and X-ray diffraction (XRD) were utilized to characterize the acid-treated Clinoptilolite. The effect of some parameters on adsorption efficiency including pH, adsorbent dosage, initial dye concentration and contact time were studied. The isotherm and kinetic study were applied to describe the data obtained from the dye adsorption process. The results indicated that increasing the studied parameters had direct and positive effect on the dye adsorption efficiency. The results showed that higher dye adsorption efficiency was observed at pH=10, adsorbent dosage of 0.5 g/L, dye concentration of 50 mg/L and contact time of 90 min. the isotherm and kinetic studies are better described by pseudo-second kinetic model and Langmuir isotherm model. It can be concluded that acid-treated Clinoptilolite can be used as an effective adsorbent to remove the MB dye from aqueous solution.
- 2 May 2018
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 110 (1) , 74-80
Adsorption of cationic dye textile wastewater using Clinoptilolite: isotherm and kinetic study
The releasing of dye-contained effluents has become an objectionable problem in these decades. Thus, the aim of the present work was to evaluate the potential of the acid-treated Clinoptilolite for Methylene Blue (MB) dye removal from aqueous solution. In this experimental-lab study, the dye adsorption onto acid-treated Clinoptilolite was carried out in batch adsorption system. Brunauer-Emmet-Teller (BET) analysis, Scanning Electron Microscopy (SEM), XRF analysis and X-ray diffraction (XRD) were utilized to characterize the acid-treated Clinoptilolite. The effect of some parameters on adsorption efficiency including pH, adsorbent dosage, initial dye concentration and contact time were studied. The isotherm and kinetic study were applied to describe the data obtained from the dye adsorption process. The results indicated that increasing the studied parameters had direct and positive effect on the dye adsorption efficiency. The results showed that higher dye adsorption efficiency was observed at pH=10, adsorbent dosage of 0.5 g/L, dye concentration of 50 mg/L and contact time of 90 min. the isotherm and kinetic studies are better described by pseudo-second kinetic model and Langmuir isotherm model. It can be concluded that acid-treated Clinoptilolite can be used as an effective adsorbent to remove the MB dye from aqueous solution.
- Open Access
- 18 January 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (45) , 21645-21653
Performance evaluation of montmorillonite and modified montmorillonite by polyethyleneimine in removing arsenic from water resources
Arsenic, known as a pollutant, mostly found in ground water resources, has become a major problem in the most of underdeveloped and developing countries around the world. More than 140 million of people around the world, especially those who reside in South America and south-east of Asia, are gravely at risk of being exposed to arsenic pollution. In this study, the performance of montmorillonite (MMT) and modified montmorillonite by polyethyleneimine (MMT@PEI) in removing arsenic from water resources was evaluated and compared with each other. Response surface methodology used as experimental procedures and interaction of four variables, namely, detention time, pH, initial arsenic concentration, and the adsorbent concentration on the arsenic ion removal were conducted. It is noteworthy that all chemical experiments conducted in this study are in accordance with “Standard Methods for Water and Wastewater Experiments.” Also, XRD analysis was performed to determine the characteristics of the adsorbent. Based on the results, maximum percentage of fluoride removal efficiencies by applying montmorillonite (R2 = 0.95) and modified montmorillonite (R2 = 0.97) were 45 and 96%, respectively.
- 18 January 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (45) , 21645-21653
Open AccessPerformance evaluation of montmorillonite and modified montmorillonite by polyethyleneimine in removing arsenic from water resources
Arsenic, known as a pollutant, mostly found in ground water resources, has become a major problem in the most of underdeveloped and developing countries around the world. More than 140 million of people around the world, especially those who reside in South America and south-east of Asia, are gravely at risk of being exposed to arsenic pollution. In this study, the performance of montmorillonite (MMT) and modified montmorillonite by polyethyleneimine (MMT@PEI) in removing arsenic from water resources was evaluated and compared with each other. Response surface methodology used as experimental procedures and interaction of four variables, namely, detention time, pH, initial arsenic concentration, and the adsorbent concentration on the arsenic ion removal were conducted. It is noteworthy that all chemical experiments conducted in this study are in accordance with “Standard Methods for Water and Wastewater Experiments.” Also, XRD analysis was performed to determine the characteristics of the adsorbent. Based on the results, maximum percentage of fluoride removal efficiencies by applying montmorillonite (R2 = 0.95) and modified montmorillonite (R2 = 0.97) were 45 and 96%, respectively.