PLPriscila Maria Sarmeiro Correa Marciano Leite

Priscila Maria Sarmeiro Correa Marciano Leite

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Priscila Maria Sarmeiro Correa Marciano Leite has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Tribocorrosion studies on DLC films with silver nanoparticles for prosthesis applications

    by P A Radi, L Vieira, P Leite, V J Trava-Airoldi, M Massi, D A P Reis

    Metals and their alloys are very important for orthopedic applications, and the basic requirements for a successful implant are chemical stability, mechanical behavior, and biocompatibility in body fluids and tissues. For prosthesis applications, the corrosion resistance of metals is one of the major prerequisites to avoid impairment of the material properties due to degradation. The combined action of corrosion and wear on the material is called tribocorrosion and DLC (Diamond-Like Carbon) films have been extensively studied to increase prosthesis biocompatibility and to protect from corrosion. Additionally, DLC coatings can prevent the prosthesis to release toxic elements due to plastic deformation and corrosion. This paper is about tribocorrosion studies on DLC and DLC-Ag (DLC containing silver nanoparticles) on Ti-6Al-4V substrates. These films were obtained by PECVD (Plasma Enhanced Chemical Vapor Deposition) using hexane as a precursor. The tribocorrosion behavior of uncoated and coated samples was investigated in the reciprocating mode in Ringer’s lactate solution. From the polarization test results, the protective efficiency of the film was calculated. Silver nanoparticles improved the corrosion resistance of the films. The protective efficiency was 15 and 19% for DLC and DLC-Ag films, respectively.


  • Open Access

    Development of gelatin nanoparticles for the treatment of pathologies caused by Paraccocideoides brasiliensis

    by Aline Cristiane de Oliveira Silva, Thainara Alves Gouvea, Jéssica Aparecida Ribeiro Ambrósio, Milton Beltrame Junior, Priscila Maria Sarmeiro Correa Marciano Leite, Flavia Villaça Morais, Andreza Ribeiro Simioni, Erika Peterson Gonçalves

    Introduction: Paraccocideoides brasiliensis (Pb) is a fungal pathology that causes serious lesions in the mouth in the form of ulcerations that destroy the gingiva, palate, reflecting on the immune system. For the treatment of Paracoccidioidomycosis (PMC) the choice of drug is based on the degree of the disease, with Amphotericin B (AB) being the most used due to its mechanism of action and interaction with the fungal membrane, causing its destruction. However, with all the history of AB toxicity, there is a need to reduce the serum levels of the drug in the body. The use of nanoparticles as controlled release systems (DDS) is an alternative for this purpose. The objective of this article was to develop gelatin nanoparticles for the treatment of pathologies caused by Pb. Method: In this work, gelatin nanoparticles were processed by the two-step desolvation method and loaded with AB. The nanoparticulate system was characterized by scanning electron microscopy (SEM) and dynamic light scattering (DLS). Finally, the effectiveness of DDS was evaluated against Pb yeasts by Disk Diffusion Test. Results: the synthesized particles presented suitable sizes and shapes for application in DDS with an average size of 169.4 and 172.0 nm, for the free and encapsulated system, respectively. Biological model tests of Pb showed positive results indicating that lower concentrations of AB can be efficiently administered if nanostructured DDS is used. Conclusion: This study is promising for future applications of AB-loaded gelatin nanoparticles for the treatment of pathologies caused by Paraccocideoides brasiliensis.

  • Open Access

    Effect of water and alkali on purification bacterial cellulose membrane from Kombucha

    by Letícia Pereira dos Santos Barbosa de Sousa, Priscila Maria Sarmeiro Correa Marciano Leite, Angela Aparecida Vieira, Anderson Carlos Faria, Lucia Vieira

    Bacterial cellulose membrane (BCM) is a biomaterial synthesized by bacteria of the genus Gluconocetobacter hansenii with a higher degree of purity than plant cellulose. The commonly used raw material for manipulating bacterial cellulose is kombucha, a beverage consumed by a vast population around the world that promises health benefits. The beverage is composed of tea species Camellia sinenses and a carbon source, refined sucrose, and a starter culture of bacteria and yeast with 10% fermented tea (starter tea) to activate the fermentative process. The Kombucha’s bacterial cellulose membranes (KBCM) are formed over 7 to 10 days on the surface of the fermented product and have the appearance of a gelatinous membrane, this being the by-product of interest. In this work, the objective was to obtain the membrane composed of cellulose via Kombucha and purify it to obtain crystalline cellulose. The purification was performed with distilled water and 0.5M NaOH sodium hydroxide solution to remove residues from the fermentation, successfully removing sugars and bacteria. At the end of the experiments, a lighter film was obtained with coloration close to white, and comparative analyses were performed to verify the structural chemical composition, crystallinity, and morphology of the samples by techniques FTIR, DRX, and SEM, respectively. Then, once the biomaterial was purified, the range of applications expanded to several products to meet the biomedical area, sustainable packaging, and even the fashion industry.


  • Open Access

    AVALIAÇÃO DAS PROPRIEDADES E POTENCIALIDADES DA PRÓPOLIS VERDE E SUA FONTE BOTÂNICA BACCHARIS DRACUNCULIFOLIA

    by Dominique Rafaela Faria de Lima, Leticia Boldo de Sousa, Priscila Maria Sarmeiro Corrêa Marciano, Jorge Benedito Freire Jofre, Andreza Ribeiro Simioni

    O Brasil é o terceiro maior produtor de própolis do mundo, composto que possui atividade farmacológica como antibiótico, antimutagênico, cicatrizante, antioxidante e anti-inflamatório, utilizado no tratamento alternativo de várias doenças. O objetivo desse trabalho foi comparar as propriedades químicas e potencialidades da própolis verde com a planta Baccharis dracuncunlifolia DC, que é a sua fonte botânica, a partir do extrato bruto obtido por extração a quente, por meio de análises de absorbância na região do UV-Visível para quantificação de compostos fenólicos, flavonoides, potencial antioxidante e poder bactericida utilizando microrganismos Staphylococcus aureus e Escherichia coli como biológico. A partir das análises espectrofotométricas foram obtidos teores de concentração de compostos fenólicos totais (TCFT) e flavonoides totais (TFT) superiores para a própolis verde (a média de valores encontrados para a própolis é de 1,56 ± 0.01 mEqQ/g e para a planta 0,76 ± 0.02 mEqQ/g na determinação de TFT e TCFT encontrado na amostra investigada, foi de 15,10 e 9,26% para a própolis e para a fonte botânica B. dracunculifolias, respectivamente), assim como o potencial bactericida. Os métodos empregados mostraram que a planta Baccharis dracuncunlifolia DC é fonte botânica para a própolis verde devido as similaridades entre as duas matrizes. A análise da potencialidade bactericida indicou que o extrato da própolis possuiu a capacidade de inibir o crescimento bacteriano de espécies gram-positiva e gram-negativa indicando que podem ser ferramentas importantes para tratar infecções causadas por essas bactérias.Palavras-chave: Própolis. Baccharis dracuncunlifolia. Extração. Caracterização.ABSTRACTBrazil is the third largest producer of propolis in the world, a compound that has pharmacological activity such as antibiotic, antimutagenic, healing, antioxidant and anti-inflammatory, used in the alternative treatment of various diseases. The objective of this work was to compare the chemical properties and potentialities of green propolis with Baccharis dracuncunlifolia DC plant, which is its botanical source, from the raw extract obtained by hot extraction, by absorbance analysis in the UV- Visible for quantification of phenolic compounds, flavonoids, antioxidant potential and bactericidal power using Staphylococcus aureus and Escherichia coli microorganisms as biological. From the spectrophotometric analyzes were obtained concentrations of total phenolic compounds (TCFT) and total flavonoids (TFT) higher for green propolis (the average values found for propolis is 1.56 ± 0.01 mEqQ / g for the plant). 0.76 ± 0.02 mEqQ/g in the determination of TFT and TCFT found in the investigated sample was 15.10 and 9.26% for propolis and botanical source B. dracunculifolias, respectively), as well as bactericidal potential. The methods employed showed that Baccharis dracuncunlifolia DC plant is a botanical source for green propolis due to the similarities between the two matrices. Analysis of bactericidal potential indicated that propolis extract has the ability to inhibit bacterial growth of gram-positive and gram-negative species indicating that they may be important tools for treating infections caused by these bacteria.Keywords: Propolis. Baccharis dracuncunlifolia. Extraction. Characterization.


  • Corrosion behavior of Al2024‐T3, Al5052‐H32, and Al6061‐T6 aluminum alloys coated with DLC films in aviation fuel medium, Jet A‐1 and AVGAS 100LL

    by Paulo F. Macário, Angela Vieira, Lucas Manfroi, Michely G. P. da Silva, Priscila Leite, Lucia Vieira

    In aircraft and storage fuel tanks, many environmental corrosion factors can be present, which can cause breakdown to the passive film of aluminum causing severe localized corrosion. Aiming to a solution to this problem, diamond‐like carbon (DLC) films were deposited on substrates Al 2024‐T3, Al 5052‐H32, and Al 6061‐T6. The substrates with and without DLC films were submitted to a corrosive immersion test with aviation fuel Jet‐A1 and AVGAS 100LL. The surface morphology from aluminum substrates with and without DLC films was analyzed before and after 7 and 30 days of corrosive immersion tests by SEM. The adhesion of the DLC films was evaluated according to the ASTM‐C1624 scratching test standard, and the optical profilometry was used to measure the thickness and roughness. Silver nanoparticles were also added in DLC films samples due to its antibacterial properties to check the stability and resistance against corrosive fuel medium. The results indicated an improvement of corrosion resistance just with DLC films. The silver nanoparticles did not present any advantages in this corrosion protection, and the aluminum alloys suffered more corrosion than when protected by DLC films.


  • Tribocorrosion and corrosion behavior of stainless steel coated with DLC films in ethanol with different concentrations of water

    by Polyana Alves Radi, Angela Vieira, Lucas Manfroi, Karina Carvalho de Farias Nass, Marco Antonio Ramirez Ramos, Priscila Leite, Gislene Valdete Martins, Jorge Benedito Freire Jofre, Lucia Vieira


  • Open Access

    Physiological evaluation of the behavior and epidermis of freshwater planarians (Girardia tigrina and Girardia sp.) exposed to stressors

    by Matheus Salgado de Oliveira, Karla Andressa Ruiz Lopes, Priscila Maria Sarmeiro Corrêa Marciano Leite, Flavia Villaça Morais, Nádia Maria Rodrigues de Campos Velho

    Planarians are metazoan freshwater flatworms which are free-living organisms. Their body has pluripotent stem cell promoters of tissue regeneration capacity. The water temperature and the potential of hydrogen (pH) of lentic ecosystems are important factors involved in the distribution and abundance of these animals. Although the pH factor is directly related to the physiology and behavior of planarians, their adaptive and regenerating capacities still remain unknown. The Critical Thermal Maximum (CTM) is a very widespread method used in the evaluation of thermal tolerance. In this study, Girardia tigrina (Girard, 1850) and Girardia sp., a species found in Brazil, which is under study as a new species, had their epidermis assessed by scanning electron microscopy (SEM) to analyze their physiological structures before and after exposure to different stressors. SEM was used as a method to evaluate the planarians9 epidermis as a result of the increasing temperature (CTM) and pH alterations, the latter with the use of a new methodology defined as Critical Hydrogen ion concentration Maximum (CHM). In increasing temperatures from 20°C to 37°C, both Girardia tigrina and Girardia sp. proved to be adaptable to thermal stress. Girardia sp. was shown to be more resistant to higher temperatures. However, Girardia tigrina was more resistant to extreme pH conditions (4.0 to 10.0). SEM analysis showed morphological differences among planarian species, such as the arrangement of the structures and cell types of the dorsal epidermis. Moreover, planarians demonstrated the ability to change the surrounding pH of their external environment in order to maintain the function of their physiological mechanisms, suggesting that these animals have a complex survival system, possibly related to protonephridia, flame cells and excretory pores. This article has an associated First Person interview with the first author of the paper.


  • Scratch testing for micro- and nanoscale evaluation of tribocharging in DLC films containing silver nanoparticles using AFM and KPFM techniques

    by L. Vieira, F.L.C. Lucas, S.F. Fisssmer, L.C.D. dos Santos, M. Massi, P.M.S.C.M. Leite, C.A.R. Costa, E.M. Lanzoni, R.S. Pessoa, H.S. Maciel