Simon Mertes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Simon Mertes has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Stefan Pischinger
Chair of Thermodynamics of Mobile Energy Conversion Systems (TME), RWTH Aachen University, 52074 Aachen, Germany
8 shared publications Adrian Schlosshauer
3 shared publicationsFelix Kunert
3 shared publications- Martin Lenz
RWTH Aachen University
3 shared publications Nerses Arutunian
3 shared publications- Sreejoe Kaniyamparambil3 shared publications
Latest Publications
- Open Access
Model-Predictive Energy Management for Optimizing the System Efficiency of a Fuel Cell Truck Considering Fuel Cell Degradation
This work presents a model predictive control (MPC) approach for optimizing the powertrain system efficiency of a fuel cell electric heavy-duty vehicle. The MPC determines the power split between the high-voltage traction battery and the fuel cell system so that the power demand of the drive cycle is met, while a second objective extends the lifetime of the fuel cell stack by including stack degradation in the cost function. Based on driving profile information, the controller adjusts the fuel cell power trajectory within a specified prediction horizon such that a target state of charge of the traction battery is reached at the end of the time-discrete horizon, fuel consumption is minimized, and excessive degradation is avoided. The control variables are computed from discrete-time models of the fuel cell, the truck, and the battery. The resulting non-linear optimization problem is solved with the open-source software package acados, integrated into MATLAB Simulink to achieve real-time capability. The MPC is implemented and tested in a model-in-the-loop environment, and its real-time execution is verified on a dSPACE MicroAutoBox III rapid control prototyping unit. On the Vehicle Energy Consumption Calculation Tool (VECTO) Long Haul cycle, hydrogen consumption is reduced by 6.5%, while membrane thinning and the loss of electrochemically active surface area are reduced by 6.1% and 2.3%, respectively, compared with a rule-based strategy.
Open AccessModel-Predictive Energy Management for Optimizing the System Efficiency of a Fuel Cell Truck Considering Fuel Cell Degradation
This work presents a model predictive control (MPC) approach for optimizing the powertrain system efficiency of a fuel cell electric heavy-duty vehicle. The MPC determines the power split between the high-voltage traction battery and the fuel cell system so that the power demand of the drive cycle is met, while a second objective extends the lifetime of the fuel cell stack by including stack degradation in the cost function. Based on driving profile information, the controller adjusts the fuel cell power trajectory within a specified prediction horizon such that a target state of charge of the traction battery is reached at the end of the time-discrete horizon, fuel consumption is minimized, and excessive degradation is avoided. The control variables are computed from discrete-time models of the fuel cell, the truck, and the battery. The resulting non-linear optimization problem is solved with the open-source software package acados, integrated into MATLAB Simulink to achieve real-time capability. The MPC is implemented and tested in a model-in-the-loop environment, and its real-time execution is verified on a dSPACE MicroAutoBox III rapid control prototyping unit. On the Vehicle Energy Consumption Calculation Tool (VECTO) Long Haul cycle, hydrogen consumption is reduced by 6.5%, while membrane thinning and the loss of electrochemically active surface area are reduced by 6.1% and 2.3%, respectively, compared with a rule-based strategy.
- Open Access
- 17 August 2026
- Published by MDPI AG in Preprints.org
Model-Predictive Energy Management for Optimizing the System Efficiency of a Fuel Cell Truck Considering Fuel Cell Degradation
This work presents a model predictive control (MPC) approach for optimizing the powertrain system efficiency of a fuel cell electric heavy-duty vehicle. The MPC determines the power split between the high-voltage traction battery and the fuel cell system so that the power demand of the drive cycle is met, while a second objective extends the lifetime of the fuel cell stack by including stack degradation in the cost function. Based on driving profile information, the controller adjusts the fuel cell power trajectory within a specified prediction horizon such that a target state of charge of the traction battery is reached at the end of the time-discrete horizon, fuel consumption is minimized and excessive degradation is avoided. The control variables are computed from discrete-time models of the fuel cell, the truck and the battery. The resulting non-linear optimization problem is solved with the open-source software package acados, integrated into MATLAB Simulink to achieve real-time capability. The MPC is implemented and tested in a model-in-the-loop environment. On the VECTO Long Haul cycle, hydrogen consumption is reduced by 6.5%, while membrane thinning and the loss of electrochemically active surface area are reduced by 6.1% and 2.3%, respectively, compared with a rule-based strategy.
- 17 August 2026
- Published by MDPI AG in Preprints.org
Open AccessModel-Predictive Energy Management for Optimizing the System Efficiency of a Fuel Cell Truck Considering Fuel Cell Degradation
This work presents a model predictive control (MPC) approach for optimizing the powertrain system efficiency of a fuel cell electric heavy-duty vehicle. The MPC determines the power split between the high-voltage traction battery and the fuel cell system so that the power demand of the drive cycle is met, while a second objective extends the lifetime of the fuel cell stack by including stack degradation in the cost function. Based on driving profile information, the controller adjusts the fuel cell power trajectory within a specified prediction horizon such that a target state of charge of the traction battery is reached at the end of the time-discrete horizon, fuel consumption is minimized and excessive degradation is avoided. The control variables are computed from discrete-time models of the fuel cell, the truck and the battery. The resulting non-linear optimization problem is solved with the open-source software package acados, integrated into MATLAB Simulink to achieve real-time capability. The MPC is implemented and tested in a model-in-the-loop environment. On the VECTO Long Haul cycle, hydrogen consumption is reduced by 6.5%, while membrane thinning and the loss of electrochemically active surface area are reduced by 6.1% and 2.3%, respectively, compared with a rule-based strategy.
- Open Access
- 7 August 2026
- Published by Elsevier in SSRN Electronic Journal
Modeling Fuel-Flexible Reversible Solid Oxide Cell Stacks in SOFC and SOEC Operation: A Unified Dynamic Framework
We present a unified dynamic framework for fuel-flexible reversible solid oxide cell stacks in fuel-cell and electrolysis operation. The sign-consistent electrochemical formulation couples CO-conversion closures with a layer-resolved thermal resistance–capacitance model and one-dimensional stack coupling. Calibrated against three anode-supported-cell fuel compositions at 850 °C and transferred to two cases at 750 °C by adjusting only a mode-specific effective kinetic anchoring temperature, the water-gas-shift-routed closure yields voltage RMSEs of 0.39–1.36% and 58–67% lower error than independently calibrated explicit CO electrochemistry on shared 850 °C data. Triple-phase-boundary pressure referencing lowers electrolysis-mode error by up to 2.05 percentage points for CO/CO2- containing feeds. Independent validation against a 30-cell electrolyte-supported stack reproduces voltage and outlet-temperature responses during a dynamic polarization ramp spanning both modes. Predicted temperature-driven flow maldistribution reduces starvation-limited global fuel utilization from 1.000 to 0.956; warmer boundaries recover it to 0.989, with increased oxygen-side pressure drop.
- 7 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessModeling Fuel-Flexible Reversible Solid Oxide Cell Stacks in SOFC and SOEC Operation: A Unified Dynamic Framework
We present a unified dynamic framework for fuel-flexible reversible solid oxide cell stacks in fuel-cell and electrolysis operation. The sign-consistent electrochemical formulation couples CO-conversion closures with a layer-resolved thermal resistance–capacitance model and one-dimensional stack coupling. Calibrated against three anode-supported-cell fuel compositions at 850 °C and transferred to two cases at 750 °C by adjusting only a mode-specific effective kinetic anchoring temperature, the water-gas-shift-routed closure yields voltage RMSEs of 0.39–1.36% and 58–67% lower error than independently calibrated explicit CO electrochemistry on shared 850 °C data. Triple-phase-boundary pressure referencing lowers electrolysis-mode error by up to 2.05 percentage points for CO/CO2- containing feeds. Independent validation against a 30-cell electrolyte-supported stack reproduces voltage and outlet-temperature responses during a dynamic polarization ramp spanning both modes. Predicted temperature-driven flow maldistribution reduces starvation-limited global fuel utilization from 1.000 to 0.956; warmer boundaries recover it to 0.989, with increased oxygen-side pressure drop.
- Open Access
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
One Model, Two Modes: A Unified Dynamic Framework for Reversible Solid Oxide Cell Stacks with Comparative CO-Conversion Closures
A unified dynamic model for reversible solid oxide cells (rSOCs) is developed and implemented in Modelica, covering both fuel-cell (SOFC) and electrolysis (SOEC) operation within a single sign-consistent equation structure requiring no port reassignment or equation restructuring at mode transitions across three fuel compositions (H2 /H2O, syngas, and CO/H2O/CO2), two operating temperatures, and a 30-cell stack archetype. The model separates electrochemical charge transfer in the cell domain from thermochemical water-gas shift (WGS) reactions in the oweld domain, enabling consistent treatment of mixed H2 /CO fuel feeds for reversible operation. Validation against two independent hardware archetypes, an anode-supported single cell (ASC) and a 30-cell electrolyte-supported stack (ESC), provides a transparent, physics-based basis for system-level rSOC analysis within the validated operating envelope of voltage and temperature observables. Two CO-conversion closures are compared under identical boundary conditions: a water-gas-shift constrained closure (WGSCC), routing all CO conversion through thermochemical WGS equilibration, and an explicit CO electrochemistry closure (ECC), enabling parallel H2 /CO charge-transfer branches. Under the present voltage-only validation basis and identical calibration protocol, WGSCC achieves voltage RMSE between 0.39 % and 1.07 % across the three fuel compositions and two temperatures (750 and 850 °C), with RMSE improvements of 58-67 % over ECC in every case and every operating mode, consistent with more parsimonious parameterisation in the absence of outlet composition data. A TPB partial-pressure reference for the activation overpotential reduces EC-mode voltage error by up to 1.7 % for CO/CO2-containing feeds. Stack-level model results indicate that temperature-induced massflow maldistribution reduces the achievable global fuel utilisation by approximately 5 % under poor insulation (model-based estimate); improved insulation recovers this margin at the cost of increased cathode-side pressure drop.
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOne Model, Two Modes: A Unified Dynamic Framework for Reversible Solid Oxide Cell Stacks with Comparative CO-Conversion Closures
A unified dynamic model for reversible solid oxide cells (rSOCs) is developed and implemented in Modelica, covering both fuel-cell (SOFC) and electrolysis (SOEC) operation within a single sign-consistent equation structure requiring no port reassignment or equation restructuring at mode transitions across three fuel compositions (H2 /H2O, syngas, and CO/H2O/CO2), two operating temperatures, and a 30-cell stack archetype. The model separates electrochemical charge transfer in the cell domain from thermochemical water-gas shift (WGS) reactions in the oweld domain, enabling consistent treatment of mixed H2 /CO fuel feeds for reversible operation. Validation against two independent hardware archetypes, an anode-supported single cell (ASC) and a 30-cell electrolyte-supported stack (ESC), provides a transparent, physics-based basis for system-level rSOC analysis within the validated operating envelope of voltage and temperature observables. Two CO-conversion closures are compared under identical boundary conditions: a water-gas-shift constrained closure (WGSCC), routing all CO conversion through thermochemical WGS equilibration, and an explicit CO electrochemistry closure (ECC), enabling parallel H2 /CO charge-transfer branches. Under the present voltage-only validation basis and identical calibration protocol, WGSCC achieves voltage RMSE between 0.39 % and 1.07 % across the three fuel compositions and two temperatures (750 and 850 °C), with RMSE improvements of 58-67 % over ECC in every case and every operating mode, consistent with more parsimonious parameterisation in the absence of outlet composition data. A TPB partial-pressure reference for the activation overpotential reduces EC-mode voltage error by up to 1.7 % for CO/CO2-containing feeds. Stack-level model results indicate that temperature-induced massflow maldistribution reduces the achievable global fuel utilisation by approximately 5 % under poor insulation (model-based estimate); improved insulation recovers this margin at the cost of increased cathode-side pressure drop.
- Open Access
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
Modelica Implementation of a Unified Reversible Solid Oxide Cell Model: Complete Equations, Calibration Workflow, and Hardware-Specific Parameter Sets
This article documents the complete implementation of a unified dynamic Modelica model for reversible solid oxide cells (rSOCs), covering both fuel-cell (SOFC) and electrolysis (SOEC) operation within a single equation structure without mode-dependent restructuring. The model architecture separates electrochemical charge transfer in the cell domain from thermochemical water-gas shift (WGS) reactions in the flowfield domain; a unified sign convention and fixed port indexing enable continuous FC↔EC transitions. Documented method components include: (i) a dual-pathway Butler-Volmer formulation with triple-phaseboundary (TPB) referenced partial pressures for activation and concentration overpotentials; (ii) two CO-conversion closures (Water-gas-shift CO conversion - WGSCC and Electrochemical CO vonversion - ECC) including the algebraic coupling required for parallel H2/CO chargetransfer branches under ECC; (iii) logarithmic-mean bulk concentration expressions with mode-dependent educt/product assignment; (iv) a lumped thermal resistance network including heat-transfer correlations, Kozeny-Carman permeability, and end-plate boundary conditions; and (v) a reduced-order kinetic anchoring parameter T*ref with a sweep-based selection procedure for temperature extrapolation. Geometry, material, and calibrated electrochemical/transport parameters are provided for two hardware archetypes used for model assessment in the companion research article: an anode-supported single cell (ASC) and a 30-cell electrolyte-supported stack (ESC).
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessModelica Implementation of a Unified Reversible Solid Oxide Cell Model: Complete Equations, Calibration Workflow, and Hardware-Specific Parameter Sets
This article documents the complete implementation of a unified dynamic Modelica model for reversible solid oxide cells (rSOCs), covering both fuel-cell (SOFC) and electrolysis (SOEC) operation within a single equation structure without mode-dependent restructuring. The model architecture separates electrochemical charge transfer in the cell domain from thermochemical water-gas shift (WGS) reactions in the flowfield domain; a unified sign convention and fixed port indexing enable continuous FC↔EC transitions. Documented method components include: (i) a dual-pathway Butler-Volmer formulation with triple-phaseboundary (TPB) referenced partial pressures for activation and concentration overpotentials; (ii) two CO-conversion closures (Water-gas-shift CO conversion - WGSCC and Electrochemical CO vonversion - ECC) including the algebraic coupling required for parallel H2/CO chargetransfer branches under ECC; (iii) logarithmic-mean bulk concentration expressions with mode-dependent educt/product assignment; (iv) a lumped thermal resistance network including heat-transfer correlations, Kozeny-Carman permeability, and end-plate boundary conditions; and (v) a reduced-order kinetic anchoring parameter T*ref with a sweep-based selection procedure for temperature extrapolation. Geometry, material, and calibrated electrochemical/transport parameters are provided for two hardware archetypes used for model assessment in the companion research article: an anode-supported single cell (ASC) and a 30-cell electrolyte-supported stack (ESC).
- Open Access
- 4 March 2026
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 117, 902-914
Real-time impedance spectroscopy of lithium-ion batteries via composite current pulses
- 4 March 2026
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 117, 902-914
Open AccessReal-time impedance spectroscopy of lithium-ion batteries via composite current pulses
- Open Access
- 29 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 203
CFD-based optimization toolchain for channel geometry in PEM fuel cells with novel BPP material
- 29 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 203
Open AccessCFD-based optimization toolchain for channel geometry in PEM fuel cells with novel BPP material
- Open Access
- 21 May 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 648
Development of a cloud-based toolchain for data science in fuel cell vehicles
- 21 May 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 648
Open AccessDevelopment of a cloud-based toolchain for data science in fuel cell vehicles
- 11 April 2022
- Published by Elsevier in Applied Thermal Engineering
- Vol. 211, 118467
Applying a numerical optimization to determine the entropic heat coefficient of a battery
- 11 April 2022
- Published by Elsevier in Applied Thermal Engineering
- Vol. 211, 118467
Applying a numerical optimization to determine the entropic heat coefficient of a battery