Nirmal Kurian
Research Subjects
Nirmal Kurian has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Kevin George Varghese
Assistant Professor, Department of Prosthodontics and Crown & Bridge, Christian Dental College, Ludhiana, Punjab, India
23 shared publications - Joe Mathew Cherian
Christian Dental College, Ludhiana, Punjab, India
11 shared publications Angleena Y. Daniel
Department of Prosthodontics and Crown and Bridge, Christian Dental College, Ludhiana, Punjab, India
7 shared publicationsNitasha Gandhi
Department of Prosthodontics and Crown and Bridge, Christian Dental College, Ludhiana, Punjab, India
7 shared publications- Vinaya Susan Varghese
Christian Dental College, CMC Ludhiana India
7 shared publications - Nitasha Gandhi
Department of Prosthodontics and Crown and Bridge, Christian Dental College, CMC, Ludhiana, Punjab, India
6 shared publications
Latest Publications
- 7 September 2026
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 136 (5) , 1257-1268
Clinical performance and prosthetic outcomes in reinforced implant-supported overdentures: A systematic review
- 7 September 2026
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 136 (5) , 1257-1268
Clinical performance and prosthetic outcomes in reinforced implant-supported overdentures: A systematic review
- 3 April 2026
- Published by Elsevier in The Journal of the American Dental Association
- Vol. 157 (5) , 446
Noncommunicable Diseases Recognized
- 3 April 2026
- Published by Elsevier in The Journal of the American Dental Association
- Vol. 157 (5) , 446
Noncommunicable Diseases Recognized
- 27 February 2026
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 136 (1) , e44-e47
A 3-dimensionally printed stackable device for verifying a complete arch implant digital scan and recording the maxillomandibular relationship
- 27 February 2026
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 136 (1) , e44-e47
A 3-dimensionally printed stackable device for verifying a complete arch implant digital scan and recording the maxillomandibular relationship
- Open Access
- 1 January 2026
- Published by Wolters Kluwer Health in The Journal of Indian Prosthodontic Society
- Vol. 26 (1) , 43-48
Does resin cement choice influence the fracture strength of bonded lithium disilicate veneers? An ex vivo study
Aim: The aim of this study was to evaluate and compare the fracture strength of ceramic veneers bonded to natural teeth using different light-cure resin cements. Settings and Design: An ex vivo study. Materials and Methods: Thirty extracted human maxillary anterior teeth were collected and prepared to receive lithium disilicate ceramic veneers, which were allocated into two groups based on the type of resin cement employed for bonding to natural teeth. The specimens were randomly divided into two groups. One group was bonded with Variolink NLC (Ivoclar), whereas the other was bonded with RelyX cement (3M ESPE). Fracture strength was evaluated using a universal testing machine (UTM), with the maximum load required to induce fracture recorded. The tests were conducted under a controlled crosshead speed of 1 mm/min using the UTM, and the maximum load required to cause fracture was recorded for each specimen. Statistical Analysis Used: The Shapiro–Wilk and Kolmogorov–Smirnov tests were employed to assess the data’s normality. The variables between the groups were compared using the independent t -test. If P < 0.05, all results were deemed statistically significant. Results: The mean fracture strength of lithium disilicate veneers differed significantly between the two groups. The mean fracture resistance for RelyX was 0.237 ± 0.083 kN, whereas Variolink demonstrated a higher mean of 0.363 ± 0.109 kN. Conclusion: Within the limitation of the study, it was concluded that veneers bonded with Variolink NLC cement exhibited higher fracture strength compared to those bonded with RelyX veneer cement.
- 1 January 2026
- Published by Wolters Kluwer Health in The Journal of Indian Prosthodontic Society
- Vol. 26 (1) , 43-48
Open AccessDoes resin cement choice influence the fracture strength of bonded lithium disilicate veneers? An ex vivo study
Aim: The aim of this study was to evaluate and compare the fracture strength of ceramic veneers bonded to natural teeth using different light-cure resin cements. Settings and Design: An ex vivo study. Materials and Methods: Thirty extracted human maxillary anterior teeth were collected and prepared to receive lithium disilicate ceramic veneers, which were allocated into two groups based on the type of resin cement employed for bonding to natural teeth. The specimens were randomly divided into two groups. One group was bonded with Variolink NLC (Ivoclar), whereas the other was bonded with RelyX cement (3M ESPE). Fracture strength was evaluated using a universal testing machine (UTM), with the maximum load required to induce fracture recorded. The tests were conducted under a controlled crosshead speed of 1 mm/min using the UTM, and the maximum load required to cause fracture was recorded for each specimen. Statistical Analysis Used: The Shapiro–Wilk and Kolmogorov–Smirnov tests were employed to assess the data’s normality. The variables between the groups were compared using the independent t -test. If P < 0.05, all results were deemed statistically significant. Results: The mean fracture strength of lithium disilicate veneers differed significantly between the two groups. The mean fracture resistance for RelyX was 0.237 ± 0.083 kN, whereas Variolink demonstrated a higher mean of 0.363 ± 0.109 kN. Conclusion: Within the limitation of the study, it was concluded that veneers bonded with Variolink NLC cement exhibited higher fracture strength compared to those bonded with RelyX veneer cement.
- 30 September 2025
- Published by Wiley in Journal of Esthetic and Restorative Dentistry
- Vol. 37 (12) , 2590-2600
Clinical Performance and Survival Outcomes of Milled Versus Pressed Lithium Disilicate Veneers: A Systematic Review
Objective: The aim of this systematic review was to assess and compare the clinical performance, marginal adaptation, esthetic outcomes, and long‐term survival of lithium disilicate veneers fabricated using computer‐aided design and computer‐aided manufacturing (CAD/CAM) and heat‐pressed techniques. An electronic search was performed in PubMed, Scopus, and Cochrane Library databases on February 24, 2025. Keywords and MeSH terms related to “lithium disilicate,” “CAD/CAM,” “pressed veneers,” “anterior teeth,” and “laminate veneers” were used to identify relevant studies published between 2013 and 2025. Materials and Methods: This review adhered to the Preferred Reporting Items for Systematic Reviews and Meta‐Analyses (PRISMA) 2020 guidelines and was registered in the International Prospective Register of Systematic Reviews (PROSPERO Registration number; CRD420251003590). Randomized controlled trials, clinical trials, retrospective studies, case series, and ex vivo studies published in English were included. Eligible studies evaluated lithium disilicate veneers placed on anterior teeth with a minimum follow‐up of 6 months and reported outcomes related to marginal adaptation, survival, esthetics, or patient satisfaction. Data extraction was performed by two reviewers independently. Risk of bias was assessed using the ROB 2.0, QUIN, and ROBINS‐I tools, and the GRADE framework was employed to evaluate the quality of evidence. Results: A total of 401 records were retrieved, out of which eight studies were included after screening. Of these, five studies compared CAD/CAM and heat‐pressed veneers, two evaluated CAD/CAM‐only, and 3 focused on heat‐pressed‐only interventions. Two were ex vivo studies. Heat‐pressed veneers demonstrated superior marginal adaptation in both clinical and laboratory settings. CAD/CAM veneers showed better internal fit and workflow efficiency. Long‐term survival (up to 10 years) was higher in heat‐pressed veneers, particularly in complex cases like fluorosis or anterior FPDs. Color match (Δ E values) was within clinically acceptable limits across all materials. Only one randomized controlled trial exhibited low risk of bias; the remaining studies ranged from moderate to high risk. GRADE assessment downgraded most outcomes to low or very low certainty due to study design limitations and heterogeneity. Conclusions: Both CAD/CAM and heat‐pressed lithium disilicate veneers offer satisfactory esthetic and clinical outcomes when proper case selection and bonding protocols are followed. While CAD/CAM techniques enhance reproducibility and efficiency, heat‐press methods appear superior in marginal adaptation and long‐term survival. Further well‐designed randomized trials with standardized outcome measures are essential to strengthen current evidence.
- 30 September 2025
- Published by Wiley in Journal of Esthetic and Restorative Dentistry
- Vol. 37 (12) , 2590-2600
Clinical Performance and Survival Outcomes of Milled Versus Pressed Lithium Disilicate Veneers: A Systematic Review
Objective: The aim of this systematic review was to assess and compare the clinical performance, marginal adaptation, esthetic outcomes, and long‐term survival of lithium disilicate veneers fabricated using computer‐aided design and computer‐aided manufacturing (CAD/CAM) and heat‐pressed techniques. An electronic search was performed in PubMed, Scopus, and Cochrane Library databases on February 24, 2025. Keywords and MeSH terms related to “lithium disilicate,” “CAD/CAM,” “pressed veneers,” “anterior teeth,” and “laminate veneers” were used to identify relevant studies published between 2013 and 2025. Materials and Methods: This review adhered to the Preferred Reporting Items for Systematic Reviews and Meta‐Analyses (PRISMA) 2020 guidelines and was registered in the International Prospective Register of Systematic Reviews (PROSPERO Registration number; CRD420251003590). Randomized controlled trials, clinical trials, retrospective studies, case series, and ex vivo studies published in English were included. Eligible studies evaluated lithium disilicate veneers placed on anterior teeth with a minimum follow‐up of 6 months and reported outcomes related to marginal adaptation, survival, esthetics, or patient satisfaction. Data extraction was performed by two reviewers independently. Risk of bias was assessed using the ROB 2.0, QUIN, and ROBINS‐I tools, and the GRADE framework was employed to evaluate the quality of evidence. Results: A total of 401 records were retrieved, out of which eight studies were included after screening. Of these, five studies compared CAD/CAM and heat‐pressed veneers, two evaluated CAD/CAM‐only, and 3 focused on heat‐pressed‐only interventions. Two were ex vivo studies. Heat‐pressed veneers demonstrated superior marginal adaptation in both clinical and laboratory settings. CAD/CAM veneers showed better internal fit and workflow efficiency. Long‐term survival (up to 10 years) was higher in heat‐pressed veneers, particularly in complex cases like fluorosis or anterior FPDs. Color match (Δ E values) was within clinically acceptable limits across all materials. Only one randomized controlled trial exhibited low risk of bias; the remaining studies ranged from moderate to high risk. GRADE assessment downgraded most outcomes to low or very low certainty due to study design limitations and heterogeneity. Conclusions: Both CAD/CAM and heat‐pressed lithium disilicate veneers offer satisfactory esthetic and clinical outcomes when proper case selection and bonding protocols are followed. While CAD/CAM techniques enhance reproducibility and efficiency, heat‐press methods appear superior in marginal adaptation and long‐term survival. Further well‐designed randomized trials with standardized outcome measures are essential to strengthen current evidence.
- 11 August 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 135 (4) , 836-837
A selective topical anesthesia technique for anesthetizing the abutment-gingival collar mucosa
- 11 August 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 135 (4) , 836-837
A selective topical anesthesia technique for anesthetizing the abutment-gingival collar mucosa
- 26 May 2025
- Published by Wiley in Special Care in Dentistry
- Vol. 45 (3) , e70060
Craniofacial Manifestation and Oral Health Care Needs in Pediatric Population With Fetal Alcohol Syndrome: A Systematic Review
Purpose: This systematic review aims to investigate craniofacial symptoms, oral healthcare requirements, and management approaches for children diagnosed with Fetal Alcohol Spectrum Disorder (FASD). Methods: Electronic searches were conducted across five databases (PubMed, Embase, Cochrane Library, Scopus, Web of Science, and LILACS). The inclusion criteria focused on original research for children with FASD, up to 18 years, emphasizing craniofacial symptoms, oral health, and management protocols. Data extraction was performed independently by two researchers using predetermined criteria. The JBI Critical Appraisal Tool was used to assess the risk of bias in the selected studies. PICO criteria guided study selection, with a focus on low risk of bias. Data analysis was carried out independently by two researchers. Results: Among 361 identified papers, 215 were screened, and 16 studies meeting research criteria were included. The findings established a body of evidence linking characteristic craniofacial symptoms to FASD. They highlighted heightened oral health needs for children with FASD, emphasizing the significance of frequent recall and preventive measures. Conclusion: This review solidifies the connection between maternal alcohol consumption during pregnancy and dentofacial complications in children with FASD, including cleft lip/palate, malocclusion, increased DMFT, and craniofacial dysmorphia. It underscores the pivotal role of pediatric dentists in early identification and intervention.
- 26 May 2025
- Published by Wiley in Special Care in Dentistry
- Vol. 45 (3) , e70060
Craniofacial Manifestation and Oral Health Care Needs in Pediatric Population With Fetal Alcohol Syndrome: A Systematic Review
Purpose: This systematic review aims to investigate craniofacial symptoms, oral healthcare requirements, and management approaches for children diagnosed with Fetal Alcohol Spectrum Disorder (FASD). Methods: Electronic searches were conducted across five databases (PubMed, Embase, Cochrane Library, Scopus, Web of Science, and LILACS). The inclusion criteria focused on original research for children with FASD, up to 18 years, emphasizing craniofacial symptoms, oral health, and management protocols. Data extraction was performed independently by two researchers using predetermined criteria. The JBI Critical Appraisal Tool was used to assess the risk of bias in the selected studies. PICO criteria guided study selection, with a focus on low risk of bias. Data analysis was carried out independently by two researchers. Results: Among 361 identified papers, 215 were screened, and 16 studies meeting research criteria were included. The findings established a body of evidence linking characteristic craniofacial symptoms to FASD. They highlighted heightened oral health needs for children with FASD, emphasizing the significance of frequent recall and preventive measures. Conclusion: This review solidifies the connection between maternal alcohol consumption during pregnancy and dentofacial complications in children with FASD, including cleft lip/palate, malocclusion, increased DMFT, and craniofacial dysmorphia. It underscores the pivotal role of pediatric dentists in early identification and intervention.
- Open Access
- 23 May 2025
- Published by Springer Nature in British Dental Journal
- Vol. 238 (10) , 751
F.I.R.S.T acronym for avulsion
- 23 May 2025
- Published by Springer Nature in British Dental Journal
- Vol. 238 (10) , 751
Open AccessF.I.R.S.T acronym for avulsion