Juan José Burbano
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Juan José Burbano has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- María Jimena Correa
Centro de Investigación y Desarrollo en Ciencia y Tecnología de los Alimentos (CIDCA), Facultad de Ciencias Exactas, Universidad Nacional de La Plata, Comisión de Investigaciones Científicas de la Provincia de Buenos Aires (CIC), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), 47 y 116, La Plata CP 1900, Argentina
9 shared publications - Dario Marcelino Cabezas
Laboratorio de Investigación de Funcionalidad y Tecnología de Alimentos (LIFTA), Departamento de Ciencia y Tecnología, Universidad Nacional de Quilmes, Buenos Aires B1876BXD, Argentina
4 shared publications Antonela David Gara
Centro de Investigación y Desarrollo en Criotecnología de Alimentos (CIDCA), Facultad de Ciencias Exactas-Universidad Nacional de La Plata, Comisión de Investigaciones Científicas de la Provincia de Buenos Aires, Consejo Nacional de Investigaciones Científicas y Técnicas , La Plata
1 shared publication- Cristina Ferrero
Comisión de Investigaciones Científicas de la Provincia de Buenos Aires, Consejo Nacional de Investigaciones Científicas y Técnicas
1 shared publication Darío Marcelino Cabezas
Laboratorio de Investigación en Funcionalidad y Tecnología de Alimentos (LIFTA), Departamento de Ciencia y Tecnología, Universidad Nacional de Quilmes, Bernal, Argentina
1 shared publication- Ezequiel Toribio
Centro de Investigación y Desarrollo en Ciencia y Tecnología de los Alimentos (CIDCA), Facultad de Ciencias Exactas, Universidad Nacional de La Plata, Comisión de Investigaciones Científicas de la Provincia de Buenos Aires, Consejo Nacional de Investigaciones Científicas y Técnicas, La Plata, Argentina
1 shared publication
Latest Publications
- 21 October 2025
- Published by Springer Nature in Plant Foods for Human Nutrition
- Vol. 80 (4) , 1-11
Impact of Extrusion Conditions on Quinoa (Chenopodium quinoa) Flour Properties
- 21 October 2025
- Published by Springer Nature in Plant Foods for Human Nutrition
- Vol. 80 (4) , 1-11
Impact of Extrusion Conditions on Quinoa (Chenopodium quinoa) Flour Properties
- Open Access
- 24 September 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Food Technology
- Vol. 3 (6) , 2041-2051
Pumpkin seed flour (a cold-pressed by-product): characterization and rheological assessment in gluten-free bread premixes
Cold-pressed oil production generates high-quality oil and a nutrient-rich press cake as a by-product. Cucurbita pepo seeds (var. styrica) are typically used for this purpose. This work aims to add value to the press cake by-product by characterizing the techno-functional, physicochemical, nutritional, and microstructural properties of pumpkin seed flour (PSF), and evaluating the impact of PSF on the pasting and rheological behaviour of gluten-free model premixes (rice flour based). Nutritionally, PSF contained 41% protein. Although lipids accounted for one-third of its composition (predominantly unsaturated fatty acids), PSF showed high oxidative stability. Regarding its techno-functional properties, PSF showed good emulsion activity (55%), high thermal emulsion stability (51%) and good water, oil, and organic molecule retaining capacities. Characterization of PSF and rice flour (RF) showed that the two flours complement each other when forming composite mixtures. In addition, the suitability of PSF for breadmaking was determined by evaluating its effect on the rheology of premixes. The premixes were prepared by substituting RF with PSF at 10%, 20% and 30%. The viscoamylograph showed that regardless of the substitution level, PSF formed premixes that were less susceptible to retrogradation and had the potential to enhance oven spring during baking. At 20% and 30% substitution, PSF also improved the rheological quality of the gluten-free dough models, acting similarly to xanthan gum. This effect could be related to the ability of PSF to retain water and to form emulsions. These results showed the aptitude of PSF to be included in formulations intended for gluten-free bakery products.
- 24 September 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Food Technology
- Vol. 3 (6) , 2041-2051
Open AccessPumpkin seed flour (a cold-pressed by-product): characterization and rheological assessment in gluten-free bread premixes
Cold-pressed oil production generates high-quality oil and a nutrient-rich press cake as a by-product. Cucurbita pepo seeds (var. styrica) are typically used for this purpose. This work aims to add value to the press cake by-product by characterizing the techno-functional, physicochemical, nutritional, and microstructural properties of pumpkin seed flour (PSF), and evaluating the impact of PSF on the pasting and rheological behaviour of gluten-free model premixes (rice flour based). Nutritionally, PSF contained 41% protein. Although lipids accounted for one-third of its composition (predominantly unsaturated fatty acids), PSF showed high oxidative stability. Regarding its techno-functional properties, PSF showed good emulsion activity (55%), high thermal emulsion stability (51%) and good water, oil, and organic molecule retaining capacities. Characterization of PSF and rice flour (RF) showed that the two flours complement each other when forming composite mixtures. In addition, the suitability of PSF for breadmaking was determined by evaluating its effect on the rheology of premixes. The premixes were prepared by substituting RF with PSF at 10%, 20% and 30%. The viscoamylograph showed that regardless of the substitution level, PSF formed premixes that were less susceptible to retrogradation and had the potential to enhance oven spring during baking. At 20% and 30% substitution, PSF also improved the rheological quality of the gluten-free dough models, acting similarly to xanthan gum. This effect could be related to the ability of PSF to retain water and to form emulsions. These results showed the aptitude of PSF to be included in formulations intended for gluten-free bakery products.
- 11 August 2025
- Published by Springer Nature
- p. 308-320
Short-Term Storage of Gluten-Free Cakes with Walnut Flour, a By-Product from Walnut Cold-Pressed Oil Extraction
- 11 August 2025
- Published by Springer Nature
- p. 308-320
Short-Term Storage of Gluten-Free Cakes with Walnut Flour, a By-Product from Walnut Cold-Pressed Oil Extraction
- Open Access
- 6 January 2025
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 60 (1)
Gluten-free bread made with non-defatted ground walnuts: microstructural, technological, and nutritional properties
Non-defatted walnuts are interesting for developing gluten-free (GF) bread because they contain bioactive compounds and high concentrations of fibre and polyunsaturated fatty acids (PUFAs). This study aimed to determine the effects of the addition of non-defatted ground walnuts (10%, 20%, and 30%) on the nutritional and technological quality of GF breads. Furthermore, control bread (formulation without ground walnuts) and bread with 20% walnuts were selected for microstructure and sensory evaluation. The addition of walnuts led to a significant increase in specific volume, affected crumb and crust colour and produced harder and crumblier crumbs. Despite these changes, the walnuts improved the nutritional and sensory properties of breads without affecting the starch gelatinisation or protein stabilising role (on air bubbles and lipid droplets). Lipid oxidation did not increase in breads containing walnuts at 10% and 20% level. These findings suggest that, even at high levels, non-defatted ground walnuts are a suitable ingredient for GF bakery products.
- 6 January 2025
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 60 (1)
Open AccessGluten-free bread made with non-defatted ground walnuts: microstructural, technological, and nutritional properties
Non-defatted walnuts are interesting for developing gluten-free (GF) bread because they contain bioactive compounds and high concentrations of fibre and polyunsaturated fatty acids (PUFAs). This study aimed to determine the effects of the addition of non-defatted ground walnuts (10%, 20%, and 30%) on the nutritional and technological quality of GF breads. Furthermore, control bread (formulation without ground walnuts) and bread with 20% walnuts were selected for microstructure and sensory evaluation. The addition of walnuts led to a significant increase in specific volume, affected crumb and crust colour and produced harder and crumblier crumbs. Despite these changes, the walnuts improved the nutritional and sensory properties of breads without affecting the starch gelatinisation or protein stabilising role (on air bubbles and lipid droplets). Lipid oxidation did not increase in breads containing walnuts at 10% and 20% level. These findings suggest that, even at high levels, non-defatted ground walnuts are a suitable ingredient for GF bakery products.
- 14 August 2024
- Published by Springer Nature in Plant Foods for Human Nutrition
- Vol. 79 (4) , 810-818
Characterization and Techno-Functional Properties of High Protein Walnut Flour from an Oil by-Product
A high protein walnut flour (HPWF) was obtained by defatting walnut flour (WF), which is a by-product of the oil industry. The objective of this study was the chemical and techno-functional characterization of HPWF. Composition, amino acid content, protein secondary structure, protein solubility and thermal transitions were measured. Besides, the techno-functional properties, emulsion activity and stability, and water holding and oil absorption capacities, of HPWF were evaluated. Also, the molecular mass of proteins under denaturing conditions and the microstructure of HPWF were evaluated by electrophoresis and confocal scanning laser microscopy, respectively. HPWF had 55.4% protein content and 21.5% total dietary fibre. In terms of HPWF amino acid composition, the limiting amino acids were the sulphurated cysteine and methionine. By FTIR analysis, the main secondary structures were β-sheet (49%) followed by α-helix (24%); both structures are considered to be ordered. Likewise, HPWF soluble proteins increased at basic pH and HPWF proteins were separated in 11 bands with molecular masses ranging from 97 kDa to 18 kDa by electrophoresis. With respect to techno-functional properties, HPWF presented good emulsion activity (51%) and high thermal emulsion stability (46%). In addition, HPWF retained 571% and 242% of water and oil by weight, respectively. Finally, the micrograph showed the predominance of protein structures and fibre fragments, and the presence of few lipids mostly trapped. These results showed that HPWF is an interesting source of plant-based proteins and walnut flour can be used to obtain high protein ingredients from non-traditional sources.
- 14 August 2024
- Published by Springer Nature in Plant Foods for Human Nutrition
- Vol. 79 (4) , 810-818
Characterization and Techno-Functional Properties of High Protein Walnut Flour from an Oil by-Product
A high protein walnut flour (HPWF) was obtained by defatting walnut flour (WF), which is a by-product of the oil industry. The objective of this study was the chemical and techno-functional characterization of HPWF. Composition, amino acid content, protein secondary structure, protein solubility and thermal transitions were measured. Besides, the techno-functional properties, emulsion activity and stability, and water holding and oil absorption capacities, of HPWF were evaluated. Also, the molecular mass of proteins under denaturing conditions and the microstructure of HPWF were evaluated by electrophoresis and confocal scanning laser microscopy, respectively. HPWF had 55.4% protein content and 21.5% total dietary fibre. In terms of HPWF amino acid composition, the limiting amino acids were the sulphurated cysteine and methionine. By FTIR analysis, the main secondary structures were β-sheet (49%) followed by α-helix (24%); both structures are considered to be ordered. Likewise, HPWF soluble proteins increased at basic pH and HPWF proteins were separated in 11 bands with molecular masses ranging from 97 kDa to 18 kDa by electrophoresis. With respect to techno-functional properties, HPWF presented good emulsion activity (51%) and high thermal emulsion stability (46%). In addition, HPWF retained 571% and 242% of water and oil by weight, respectively. Finally, the micrograph showed the predominance of protein structures and fibre fragments, and the presence of few lipids mostly trapped. These results showed that HPWF is an interesting source of plant-based proteins and walnut flour can be used to obtain high protein ingredients from non-traditional sources.
- 19 March 2024
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 59 (5) , 3126-3133
Almond flour a by‐product of oil extraction: nutritional characterisation and impact on rheological properties of premixes for bakery products
Summary: The press cake of almond oil extraction contains macro‐ and micronutrients of high nutritional quality. From the milling of this press cake, almond flour (AF) is obtained. The objectives of this work were to evaluate the nutritional and techno‐functional properties of AF and the impact of AF (10%, 20% and 30%) addition on rheological and techno‐functional properties of wheat flour, and maize and potato starches. AF presented a high level of lipids (43.56%), oleic acid being the major one. However, AF presented a long estimated shelf life (18 months). Also, AF was a good source of Mg, P, Cu, Fe, Mn and Zn. Moreover, AF added to wheat flour reduced water absorption and dough farinograph stability. Besides, AF caused a reduction of starch swelling and retrogradation, evidenced by lower peak viscosity and setback values in the viscoamylograph curves of wheat flour; maize and potato starches. This study showed the potential impact of AF use for the development of new bakery products.
- 19 March 2024
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 59 (5) , 3126-3133
Almond flour a by‐product of oil extraction: nutritional characterisation and impact on rheological properties of premixes for bakery products
Summary: The press cake of almond oil extraction contains macro‐ and micronutrients of high nutritional quality. From the milling of this press cake, almond flour (AF) is obtained. The objectives of this work were to evaluate the nutritional and techno‐functional properties of AF and the impact of AF (10%, 20% and 30%) addition on rheological and techno‐functional properties of wheat flour, and maize and potato starches. AF presented a high level of lipids (43.56%), oleic acid being the major one. However, AF presented a long estimated shelf life (18 months). Also, AF was a good source of Mg, P, Cu, Fe, Mn and Zn. Moreover, AF added to wheat flour reduced water absorption and dough farinograph stability. Besides, AF caused a reduction of starch swelling and retrogradation, evidenced by lower peak viscosity and setback values in the viscoamylograph curves of wheat flour; maize and potato starches. This study showed the potential impact of AF use for the development of new bakery products.
- 22 May 2023
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 58 (7) , 3827-3837
Effect of ultrasonic treatment on soybean okara to be used as a gluten‐free bread improver
Summary: The production of soybean protein isolates generates an insoluble residue called okara that is rich in proteins and dietary fibre. These macromolecules have functional properties that can be modified and improved by emerging technologies, such as high‐intensity ultrasound. The objectives of this work were to analyse the ability of soybean okara (UOK) to act as a gluten‐free bread improver and to evaluate the effect of a sonication process on this property (OKS). Both okaras were assayed at two percentages (2% and 3%) leading to a reinforcement of interactions in the matrix of batters, producing bread of better technological and sensorial quality. The addition of OKS 3%, improved specific volume (20%), reduced the hardness (30%) and increased the cohesiveness of the crumb and improved the air inclusion. These results demonstrated the efficiency of the sonication process to obtain a gluten‐free bread improver from a bulky by‐product of the soybean industry.
- 22 May 2023
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 58 (7) , 3827-3837
Effect of ultrasonic treatment on soybean okara to be used as a gluten‐free bread improver
Summary: The production of soybean protein isolates generates an insoluble residue called okara that is rich in proteins and dietary fibre. These macromolecules have functional properties that can be modified and improved by emerging technologies, such as high‐intensity ultrasound. The objectives of this work were to analyse the ability of soybean okara (UOK) to act as a gluten‐free bread improver and to evaluate the effect of a sonication process on this property (OKS). Both okaras were assayed at two percentages (2% and 3%) leading to a reinforcement of interactions in the matrix of batters, producing bread of better technological and sensorial quality. The addition of OKS 3%, improved specific volume (20%), reduced the hardness (30%) and increased the cohesiveness of the crumb and improved the air inclusion. These results demonstrated the efficiency of the sonication process to obtain a gluten‐free bread improver from a bulky by‐product of the soybean industry.
- 16 February 2022
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 57 (8) , 4772-4781
Gluten‐free cakes with walnut flour: a technological, sensory, and microstructural approach
Summary: Walnut flour (WF), a by‐product of walnut oil production, is characterised by high polyunsaturated fatty acids, proteins, and fibre contents and presents suitability for bakery products. However, when using non‐traditional ingredients, it is essential to evaluate the effect on the quality properties of the final product. So, this work aimed to assess the impact of WF on the technological, physicochemical, and sensory properties of gluten‐free (GF) cakes. WF was added at a flour blend (cassava (CS) and maize (MS) starches and rice flour) at 0, 10%, 15%, and 20%. The results showed that WF modified starch gelatinisation, increased amylose–lipid complex (ALC) content, and made crumbs easier to chew. Besides, the total dietary fibre (TDF) and protein content significantly increased. Cakes with 15% WF presented the highest specific volume (SV) and no differences in overall acceptability with respect to control. Hence, WF is a suitable ingredient for gluten‐free bakery products.
- 16 February 2022
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 57 (8) , 4772-4781
Gluten‐free cakes with walnut flour: a technological, sensory, and microstructural approach
Summary: Walnut flour (WF), a by‐product of walnut oil production, is characterised by high polyunsaturated fatty acids, proteins, and fibre contents and presents suitability for bakery products. However, when using non‐traditional ingredients, it is essential to evaluate the effect on the quality properties of the final product. So, this work aimed to assess the impact of WF on the technological, physicochemical, and sensory properties of gluten‐free (GF) cakes. WF was added at a flour blend (cassava (CS) and maize (MS) starches and rice flour) at 0, 10%, 15%, and 20%. The results showed that WF modified starch gelatinisation, increased amylose–lipid complex (ALC) content, and made crumbs easier to chew. Besides, the total dietary fibre (TDF) and protein content significantly increased. Cakes with 15% WF presented the highest specific volume (SV) and no differences in overall acceptability with respect to control. Hence, WF is a suitable ingredient for gluten‐free bakery products.
- 25 May 2021
- Published by Springer Nature in Plant Foods for Human Nutrition
- Vol. 76 (2) , 233-239
Composition and Physicochemical Characterization of Walnut Flour, a By-product of Oil Extraction
The by-product of walnut oil (Juglans regia L.) extraction is a press cake rich in polyunsaturated fatty acids and other bioactive compounds. From this cake, walnut flour is obtained by a milling process. The composition and a physicochemical characterization of walnut flour was performed: proximal composition, mineral content, and fatty acid and amino acid profiles were measured. Besides, antioxidant capacity and water and oil holding capacities were determined. Walnut flour has 55% of lipids with an optimum w6/w3 ratio, a good lysine/arginine ratio, and high levels of antioxidants that contribute to its oxidative stability, the estimated shelf life being 16 months. In regards to interaction with other ingredients, walnut flour retained 258 and 70% (w/w) of water and oil, respectively. Therefore, these results show that walnut flour is a good source of micro- and macronutrients, compared to flours commonly used in breadmaking. Also, walnut flour has good technofunctional properties and thus its incorporation could improve the nutritional and technological characteristics of new bakery products.
- 25 May 2021
- Published by Springer Nature in Plant Foods for Human Nutrition
- Vol. 76 (2) , 233-239
Composition and Physicochemical Characterization of Walnut Flour, a By-product of Oil Extraction
The by-product of walnut oil (Juglans regia L.) extraction is a press cake rich in polyunsaturated fatty acids and other bioactive compounds. From this cake, walnut flour is obtained by a milling process. The composition and a physicochemical characterization of walnut flour was performed: proximal composition, mineral content, and fatty acid and amino acid profiles were measured. Besides, antioxidant capacity and water and oil holding capacities were determined. Walnut flour has 55% of lipids with an optimum w6/w3 ratio, a good lysine/arginine ratio, and high levels of antioxidants that contribute to its oxidative stability, the estimated shelf life being 16 months. In regards to interaction with other ingredients, walnut flour retained 258 and 70% (w/w) of water and oil, respectively. Therefore, these results show that walnut flour is a good source of micro- and macronutrients, compared to flours commonly used in breadmaking. Also, walnut flour has good technofunctional properties and thus its incorporation could improve the nutritional and technological characteristics of new bakery products.