DMDavid McCallen

David McCallen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


David McCallen has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Influence of Fault Rupture Velocity on Ground Motions and Building Demands in the Near‐Fault Region

    by David McCallen, Houjun Tang, Junfei Huang, Arben Pitarka

    With the recent increases in measured ground motion records for large earthquakes, most notably the 2023 M7.8 Pazarcik earthquake in Türkiye, the potential for pervasive high velocity fault rupture propagation over an extensive fault length has been observed. This shallow strike‐slip event, with unprecedented near‐fault strong motion instrumentation throughout a large segment of the fault rupture zone, exhibited intense fault‐normal directivity pulses and fault‐parallel fling step for over two hundred kilometers along the fault. Observations of near‐shear (fault rupture velocity approaching the shear wave velocity) and supershear (fault rupture velocity exceeding the shear wave velocity) ruptures in recent major earthquakes, and the associated potential for highly damaging ground motions, motivate the need for deeper understanding of the relationship between high velocity ruptures and seismic risk to infrastructure systems. In this article, recent developments in high performance, regional‐scale fault‐to‐structure simulations are applied to provide additional insight into how high velocity ruptures can impact ground motions and the demands on building structures. First, the characteristic nonlinear response of buildings to observed intense near‐fault motions from the Türkiye event are assessed, and second, fault‐to‐structure simulations are performed for M7 strike‐slip events on the Hayward fault in the San Francisco Bay region for varying fault rupture velocities. These simulations illustrate the pronounced influence of fault rupture velocity and quantify the significant increase in regional seismic demand on structures for near‐shear and supershear scenarios.

  • Open Access

    Regional Earthquake Ground Motion Simulations for Southern California With EQSIM: Insights From the 2008 Chino Hills, 2024 Highland Park, and 2021 Carson Earthquakes

    by Chu‐Han (Clifford) Yen, Arben Pitarka, Houjun Tang, Rie Nakata, David McCallen, Ertugrul Taciroglu

    This study presents physics‐based, 3D simulations using the EQSIM framework for several earthquakes in the Los Angeles region. The primary objective was to assess the ability of deterministic physics‐based ground motion simulations to reproduce the observed motions from historical events. The selected events included the 5.4 2008 Chino Hills, the 4.4 2024 Highland Park, and the 4.3 2021 Carson events. The simulated motions were evaluated by comparing the recorded and simulated seismograms, as well as the Fourier amplitude spectra, across multiple seismic stations. The SCEC 3D velocity model, CVM‐S4.26.M01, was used to represent the regional geology, and ground motion simulations were carried out with a resolution of up to 5 Hz. The results indicate that the simulated motions captured the recorded motions up to approximately 4 Hz. While careful iterations regarding source parameters and corner frequencies were required, and, for the case of the Highland Park event, some of the near‐source stations had relatively low accuracy, the present study established a positive step toward the utilization of physics‐based simulations in practical applications. The computational efficiencies exhibited by EQSIM, especially on GPU clusters, further supported this assertion, as wall‐clock times of simulations involving more than 10 billion grid points were as low as minutes. This permits ensemble simulations for a considered scenario event so that modeling uncertainties (e.g., source and geology) can be bracketed.

  • Open Access

    Analysis of Rupture Directivity and Wave Propagation Effects on Simulated Ground Motion for Mw 7 Earthquakes on the Hayward Fault

    by Rie Nakata, Arben Pitarka, David McCallen, Houjun Tang, Camilo Pinilla-Ramos

    As part of the San Andreas fault system, the seismically active Hayward fault is a major contributor to the significant earthquake hazard in the San Francisco Bay Area (SFBA). Accurate ground-motion predictions for large earthquakes on this fault are essential, but challenges arise due to uncertainties in exactly how the fault will rupture in future earthquakes and how wave propagation effects caused by the highly heterogeneous subsurface geological structure will influence site-dependent ground motions. This study investigates the combined influence of rupture kinematics and subsurface structure on ground motion, using simulated broadband seismograms for 50 rupture realizations of an Mw 7 Hayward fault earthquake. Ground motions are generated within the physics-based Earthquake Simulation fault-to-structure exascale computing framework and the Graves–Pitarka kinematic fault rupture generator. In addition to direct comparisons with empirical ground-motion model (GMM) estimates, ensemble-averaged ground-motion intensities are used to isolate and assess source and wave path effects. We find that the local structure causes complex wave propagation and spatial variability not fully represented by the GMMs. Rupture directivity produces nearly symmetric amplification and deamplification along the fault, whereas large-slip patches yield localized influences. Among these factors, the wave propagation effects account for the largest deviation from the GMM predictions. Moreover, they contribute differently across frequencies: directivity effects peak at intermediate frequencies (∼1.5 s), but basin amplification and large-slip patch effects are most prominent at lower frequencies. This study contributes to a broader effort toward understanding key factors controlling ground-motion variability in the SFBA and provides detailed constraints for the development of region-specific, nonergodic GMMs.


  • Open Access

    An open‐access simulated earthquake ground‐motion database for an M7 Hayward Fault earthquake in the San Francisco Bay Region

    by David McCallen, Arben Pitarka, Houjun Tang, Rie Nakata, Khalid M Mosalam, Floriana Petrone, Selim Günay, Claudio Perez

    Comprehensive understanding of earthquake ground motions, particularly in the near‐fault region of large‐magnitude events, is limited by gaps in strong‐motion data. This challenge is prominent in areas with high seismic hazard but infrequent large earthquakes where data is sparse and difficult to interpret. These data limitations lead to uncertainties in the development of site‐specific ground motions, which are crucial for engineering risk assessments. To address these challenges, physics‐based regional‐scale ground‐motion simulations have been developed. With the emergence of exaflop‐scale computing ecosystems, it is now possible to simulate regional earthquake processes at unprecedented fidelity and generate the large number of fault rupture realizations necessary to characterize both intra‐ and inter‐event ground‐motion variability. This article introduces a new database of simulated earthquake ground motions, created for applications in earthquake engineering, earthquake planning, and emergency response. The inaugural version of the database features simulated ground motions for a magnitude 7 Hayward Fault earthquake in the San Francisco Bay Region (SFBR), using the EarthQuake SIMulation (EQSIM) simulation framework and the Graves–Pitarka kinematic rupture model. The aim is to provide high‐fidelity, spatially dense, three‐component motions generated on the Department of Energy's (DOE) newest generation of graphics processing unit (GPU)‐accelerated supercomputers. These motions are being made openly available to the engineering, scientific, and disaster planning communities. In addition, this work develops protocols for the efficient dissemination of these large data sets and emphasizes community engagement to build confidence in their application. This article discusses the methodology behind the data, underlying software verification and validation, scalable data management, and a user interface for data access. The goal is to facilitate widespread use and elicit expert feedback to maximize the utility and exploitation of simulated motions. While the initial focus is on the San Francisco Region, simulations for additional regions will be added as the DOE program progresses.


  • Data‐driven characterization of near‐surface velocity in the San Francisco bay area: A stationary and spatially varying approach

    by Grigorios Lavrentiadis, Elnaz Seylabi, Feiruo Xia, Hesam Tehrani, Domniki Asimaki, David McCallen

    This study presents the formulation of two new sedimentary velocity models (SVMs) applied to the San Francisco Bay Area (SFBA) to improve the near‐surface representation of shear‐wave velocity () for large‐scale, broadband numerical simulations, with the ultimate goal of enhancing the representation of the sedimentary layers in community velocity model. The first velocity model is stationary and is based solely on the time‐average shear‐wave velocity of the top 30 m (); the second velocity model is spatially varying and has location‐specific adjustments. They were developed using a dataset of 200 measured profiles. Both models were formulated within a hierarchical Bayesian framework, using a parameterization that ensures robust scaling. The spatially varying model includes a slope adjustment term modeled as a Gaussian process to capture site‐specific effects based on location. Residual analysis shows that both models are unbiased for values up to 1000 m/s. Along‐depth variability models were also developed using within‐profile residuals. The proposed models show higher in the South Bay, East Bay, and Livermore Valley compared to the USGS SFBA velocity model by a factor of two or more in some cases. Goodness‐of‐fit (GOF) comparisons using one‐dimensional (1D) linear site response analysis at selected sites demonstrate that the proposed models outperform the USGS SFBA velocity model in capturing near‐surface amplification across a broad frequency range. Incorporating along‐depth variability further improves the GOF scores by reducing over‐amplification at high frequencies. These results underscore the importance of integrating data‐driven models of the shallow crust, like the ones presented here, in coarser regional community velocity models to enhance regional seismic hazard assessments.


  • Open Access

    Transformational Regional-Scale Earthquake Simulations with the DOE EarthQuake SIMulation Exascale Framework

    by David McCallen, Arben Pitarka, Houjun Tang, Ramesh Pankajakshan, Anders Petersson, Mamun Miah

    Earthquakes present world-wide risk to economic and human safety. The 2023 earthquakes in Turkey provided a reminder of the potential for catastrophic consequences with 50,700 deaths and 15.7 million people affected. The ability to predict ground motions and infrastructure damage for earthquakes continues to be a challenging problem for scientists and engineers. Until now, estimates of ground motions have been performed empirically by looking at sparse data from past earthquakes. This approach can provide statistical information on intensity amplitudes but cannot inform site-specific ground motions essential to developing the most effective resilience. Interest has grown in largescale computational models to simulate earthquakes at regional scale. The U.S. DOE EQSIM framework was developed for regional-scale earthquake simulations at unprecedented fidelity, taking advantage of emerging GPU-accelerated systems. This article describes the EQSIM workflow and demonstrates regional-scale simulations with the new computational capability available to scientists in their quest to mitigate future disasters.


  • Open Access

    Applicability of 1D site response analysis to shallow sedimentary basins: A critical evaluation through physics‐based 3D ground motion simulations

    by Junfei Huang, David McCallen

    One‐dimensional site response analysis (1D SRA) remains the standard practice in considering the effect of local soil deposits and predicting site‐specific ground motions, although its range of applicability to realistic seismic wavefields is still in question. In this 1D approach, horizontal and vertical ground shaking are assumed to be induced by vertically propagating shear and compressional waves, respectively. A recent study based on analytical two‐dimensional (2D) plane waves and simple point source earthquake simulations has shown two mechanistic limitations in this 1D modelling technique for general inclined seismic waves, that is, systematic over‐prediction of the vertical motion and wave trapping in the 1D soil column. In this article, we evaluate in detail the applicability of this 1D modelling approach to realistic three‐dimensional (3D) simulated seismic wavefields in shallow sedimentary basins. Linear‐viscoelastic 1D SRA predictions using two types of input motions that are commonly used in practice—rock outcrop and in‐column motions, are compared with the reference true site response results from 3D earthquake simulations in terms of various measures in the frequency and time domain. It is shown that the horizontal motion in the 3D seismic wavefield exhibits dominant shear wave propagation phenomenon, while the vertical motion is a combined effect of compressional and shear waves and can be over‐predicted by the 1D approach when the incident seismic waves are inclined. Direct evidence of the wave refraction process that leads to the vertical motion over‐prediction is provided. 1D SRA with in‐column inputs can yield motions that have significantly longer duration compared to the true 3D site response solution due to trapped waves, casting in doubt the frequent need for increased soil damping in existing site studies to compensate for wave attenuation due to scattering alone. Sensitivity investigation on the increase of soil profile damping by a multiplier Dmul shows Dmul values compatible with those found in the literature for both horizontal and vertical motions. It is shown that the level of Dmul optimized for a best match of the spectral acceleration is dependent on the characteristic of the input motion and a larger Dmul is typically required for the vertical component. In contrast, 1D SRA with outcrop motions predicts motions with shorter significant duration due to its inability to capture the basin‐edge generated surface waves. A suite of ground motion simulations was performed to assess the sensitivity of the observations to the basin geologic structure including the velocity gradient, rock‐basin impedance contrast and basin depth. The analysis results show that the accuracy of the simplified 1D procedure is dependent on the wavefield composition of both the input motions and the true 3D site response solution. While the horizontal motions in shallow sedimentary basins can, to the first order, be reasonably captured by the simplified 1D approach, 1D SRA for the vertical component is in general not reliable and contributions from inclined shear waves should be accounted for in site‐specific evaluation of the vertical design ground motion.


  • Refinements to the Graves–Pitarka Kinematic Rupture Generator, Including a Dynamically Consistent Slip-Rate Function, Applied to the 2019 Mw 7.1 Ridgecrest Earthquake

    by Arben Pitarka, Robert Graves, Kojiro Irikura, Ken Miyakoshi, Changjiang Wu, Hiroshi Kawase, Arthur Rodgers, David McCallen

    The main objective of this study is to develop physics‐based constraints on the spatiotemporal variation of the slip‐rate function using a simplified dynamic rupture model. First, we performed dynamic rupture modeling of the 2019 Mw 7.1 Ridgecrest, California, earthquake, to analyze the effects of depth‐dependent stress and material friction on slip rate. Then, we used our modeling results to guide refinements to the slip‐rate function that were implemented in the Graves–Pitarka kinematic rupture generation technique. The dynamic ruptures were computed on a surface‐rupturing, planar strike‐slip fault that includes a weak (negative to low‐stress‐drop) zone in the upper 4 km of the crust. Below the weak zone, we placed high‐stress‐drop patches designed to mirror the large‐slip areas seen in various rupture model inversions of the event. The locations of the high‐stress‐drop patches and the hypocenter were varied in multiple realizations to investigate how changing the dynamic conditions affected the resulting rupture kinematics, in particular, the slip rate. From these simulations, we observed a systematic change in the shape of the slip‐rate function from Kostrov type below the weak zone to a predominantly symmetric shape within the weak zone, along with a depth‐dependent reduction of peak slip rate. We generalized these shallow rupture features into a depth‐dependent parametric variation of the slip‐rate function and implemented it in the Graves–Pitarka kinematic rupture model generator. The performance of the updated kinematic approach was then verified in 0–4 Hz simulations of the Mw 7.1 Ridgecrest earthquake, which showed that incorporating the depth‐dependent variation in the shape of the slip‐rate function improves the fit to the observed near‐fault ground motions in the 0.5–3 s period range.


  • Coupling of regional geophysics and local soil-structure models in the EQSIM fault-to-structure earthquake simulation framework

    by David McCallen, Houjun Tang, Suiwen Wu, Eric Eckert, Junfei Huang, N Anders Petersson

    Accurate understanding and quantification of the risk to critical infrastructure posed by future large earthquakes continues to be a very challenging problem. Earthquake phenomena are quite complex and traditional approaches to predicting ground motions for future earthquake events have historically been empirically based whereby measured ground motion data from historical earthquakes are homogenized into a common data set and the ground motions for future postulated earthquakes are probabilistically derived based on the historical observations. This procedure has recognized significant limitations, principally due to the fact that earthquake ground motions tend to be dictated by the particular earthquake fault rupture and geologic conditions at a given site and are thus very site-specific. Historical earthquakes recorded at different locations are often only marginally representative. There has been strong and increasing interest in utilizing large-scale, physics-based regional simulations to advance the ability to accurately predict ground motions and associated infrastructure response. However, the computational requirements for simulations at frequencies of engineering interest have proven a major barrier to employing regional scale simulations. In a U.S. Department of Energy Exascale Computing Initiative project, the EQSIM application development is underway to create a framework for fault-to-structure simulations. This framework is being prepared to exploit emerging exascale platforms in order to overcome computational limitations. This article presents the essential methodology and computational workflow employed in EQSIM to couple regional-scale geophysics models with local soil-structure models to achieve a fully integrated, complete fault-to-structure simulation framework. The computational workflow, accuracy and performance of the coupling methodology are illustrated through example fault-to-structure simulations.