Bruce Lloyd Kutter
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Bruce Lloyd Kutter has a total of 312 co-authors. Here are the top co-authors by number of shared publications:
- Daniel W. Wilson
Department of Civil and Environmental Engineering, University of California, Davis, CA, USA
22 shared publications - Ross W. Boulanger
Univ. of California, Davis
21 shared publications - Scott J. Brandenberg
Univ. of California, Los Angeles
12 shared publications Mourad Zeghal
11 shared publicationsDongdong Chang
Assistant Professor, Dept. of Civil and Environmental Engineering, Univ. of California at Los Angeles, Los Angeles, CA 90095
9 shared publications- Katerina Ziotopoulou
UC Davis
9 shared publications
Latest Publications
- 20 October 2024
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 188
Insights from the numerical analysis of axially loaded piles in liquefiable soils
- 20 October 2024
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 188
Insights from the numerical analysis of axially loaded piles in liquefiable soils
- 1 April 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 150 (4)
Effects of Excess Pore Pressure Redistribution in Liquefiable Layers
- 1 April 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 150 (4)
Effects of Excess Pore Pressure Redistribution in Liquefiable Layers
- 1 January 2023
- Published by Emerald Publishing in International Journal of Physical Modelling in Geotechnics
- Vol. 23 (1) , 3-15
Measuring vertical displacement using laser lines and cameras
Measuring displacements in model tests typically involves contact-based sensors such as linear potentiometers, where contact between two moving parts occurs at the sensing point. The sensor's finite mass, the limited stiffness of the beams and the clamping mechanism, and the slippage and hinging of the sensor body could affect the object's response and lead to measurement errors. Also, the physical mounting rack required to hold these sensors often obstructs the view and makes significant areas unavailable for conducting some other essential investigations. The advancement in high-speed, high-resolution and reasonably priced rugged cameras makes it feasible to obtain better displacement measurements by image analysis. This paper introduces a non-contact method that works by video recording the projection of laser lines on a test object to measure static and dynamic vertical displacements. The technique produces a continuous settlement distribution along the laser line passing through multiple objects of interest. This paper presents the theory for converting laser line images to displacements. The new method's validity is demonstrated by comparing the results from other measurement techniques: hand measurements, linear potentiometers and three-dimensional stereophotogrammetry.
- 1 January 2023
- Published by Emerald Publishing in International Journal of Physical Modelling in Geotechnics
- Vol. 23 (1) , 3-15
Measuring vertical displacement using laser lines and cameras
Measuring displacements in model tests typically involves contact-based sensors such as linear potentiometers, where contact between two moving parts occurs at the sensing point. The sensor's finite mass, the limited stiffness of the beams and the clamping mechanism, and the slippage and hinging of the sensor body could affect the object's response and lead to measurement errors. Also, the physical mounting rack required to hold these sensors often obstructs the view and makes significant areas unavailable for conducting some other essential investigations. The advancement in high-speed, high-resolution and reasonably priced rugged cameras makes it feasible to obtain better displacement measurements by image analysis. This paper introduces a non-contact method that works by video recording the projection of laser lines on a test object to measure static and dynamic vertical displacements. The technique produces a continuous settlement distribution along the laser line passing through multiple objects of interest. This paper presents the theory for converting laser line images to displacements. The new method's validity is demonstrated by comparing the results from other measurement techniques: hand measurements, linear potentiometers and three-dimensional stereophotogrammetry.
- 1 December 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 148 (12) , 04022111
Numerical Modeling of Liquefaction-Induced Downdrag: Validation against Centrifuge Model Tests
Earthquake-induced soil liquefaction can cause soil settlement around piles, resulting in drag load and pile settlement after shaking stops. Estimating the axial load distribution and pile settlement is important for designing and evaluating the performance of axially loaded piles in liquefiable soils. Commonly used neutral plane solution methods model the liquefiable layer as an equivalent consolidating clay layer without considering the sequencing and pattern of excess pore pressure dissipation and soil settlement. Moreover, changes in the pile shaft and the tip resistance due to excess pore pressures are ignored. A TzQzLiq numerical model was developed using the existing TzLiq material and the new QzLiq material for modeling liquefaction-induced downdrag on piles. The model accounts for the change in the pile’s shaft and tip capacity as free-field excess pore pressures develop or dissipate in soil. The developed numerical model was validated against data from a series of large centrifuge model tests, and the procedure for obtaining the necessary information and data from those is described. Additionally, a sensitivity study on TzLiq and QzLiq material properties was performed to study their effect on the developed drag load and pile settlement. Analysis results show that the proposed numerical model can reasonably predict the time histories of axial load distribution and settlement of axially loaded piles in liquefiable soils both during and postshaking.
- 1 December 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 148 (12) , 04022111
Numerical Modeling of Liquefaction-Induced Downdrag: Validation against Centrifuge Model Tests
Earthquake-induced soil liquefaction can cause soil settlement around piles, resulting in drag load and pile settlement after shaking stops. Estimating the axial load distribution and pile settlement is important for designing and evaluating the performance of axially loaded piles in liquefiable soils. Commonly used neutral plane solution methods model the liquefiable layer as an equivalent consolidating clay layer without considering the sequencing and pattern of excess pore pressure dissipation and soil settlement. Moreover, changes in the pile shaft and the tip resistance due to excess pore pressures are ignored. A TzQzLiq numerical model was developed using the existing TzLiq material and the new QzLiq material for modeling liquefaction-induced downdrag on piles. The model accounts for the change in the pile’s shaft and tip capacity as free-field excess pore pressures develop or dissipate in soil. The developed numerical model was validated against data from a series of large centrifuge model tests, and the procedure for obtaining the necessary information and data from those is described. Additionally, a sensitivity study on TzLiq and QzLiq material properties was performed to study their effect on the developed drag load and pile settlement. Analysis results show that the proposed numerical model can reasonably predict the time histories of axial load distribution and settlement of axially loaded piles in liquefiable soils both during and postshaking.
- 22 November 2022
- Published by Taylor & Francis
- p. 131-136
Dense instrumentation arrays
It is common in earthquake engineering research today to perform ad hoc checks on a theory by showing that it reasonably matches an insufficient experimental data set. It is not currently possible to collect and interactively explore enough information from experiments to fully characterize the complex phenomena involved. The number of instruments used in a centrifuge experiment is limited by the cost of instruments and signal conditioning. More restrictive, perhaps, is the complexity oflabor and bookkeeping involved in managing dozens of instruments. At UC Davis we are developing miniature data acquisition systems that can be mounted in the soil model to reduce the number and complexity of signal wires emanating from highly instrumented centrifuge models. The systems will be incorporated into a new high-performance data acquisition network.
- 22 November 2022
- Published by Taylor & Francis
- p. 131-136
Dense instrumentation arrays
It is common in earthquake engineering research today to perform ad hoc checks on a theory by showing that it reasonably matches an insufficient experimental data set. It is not currently possible to collect and interactively explore enough information from experiments to fully characterize the complex phenomena involved. The number of instruments used in a centrifuge experiment is limited by the cost of instruments and signal conditioning. More restrictive, perhaps, is the complexity oflabor and bookkeeping involved in managing dozens of instruments. At UC Davis we are developing miniature data acquisition systems that can be mounted in the soil model to reduce the number and complexity of signal wires emanating from highly instrumented centrifuge models. The systems will be incorporated into a new high-performance data acquisition network.
- 20 September 2022
- Published by Springer Nature
- p. 660-681
Liquefaction-Induced Downdrag on Piles: Insights from a Centrifuge and Numerical Modeling Program
- 20 September 2022
- Published by Springer Nature
- p. 660-681
Liquefaction-Induced Downdrag on Piles: Insights from a Centrifuge and Numerical Modeling Program
- 1 July 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 148 (7) , 04022048
Centrifuge Model Tests of Liquefaction-Induced Downdrag on Piles in Uniform Liquefiable Deposits
Earthquake-induced soil liquefaction can cause settlement around piles, which can translate to negative skin friction and the development of drag load and settlement of the piles. A series of centrifuge model tests were performed to assess liquefaction-induced downdrag and understand the interplay and effects of (1) pile embedment and pile-head load, (2) excess pore pressure generation and dissipation, and (3) reconsolidation and ground settlement on pile response during and postshaking. The model included a layered soil profile (clay, liquefiable sand, and dense sand) with two 635-mm-diameter instrumented piles. One pile was placed with its tip at the bottom of the liquefiable deposit; the other pile was embedded five diameters into the dense sand layer. The model was shaken with multiple earthquake motions with their peak horizontal accelerations ranging from 0.025 to . For each shaking event, the drag load on the piles first decreased during shaking and then increased during reconsolidation, exceeding its preshaking value. With multiple shaking events, the net drag load on the piles increased. The maximum observed drag load was found equal to the drained interface shear strength calculated from the interface friction angle of and a lateral stress coefficient of . Larger drag loads and smaller settlements were observed for the pile embedded deep in the dense sand layer. Most of the pile settlements occurred during shaking; postshaking pile settlement was less than 2% of the pile’s diameter. The mechanisms behind the development of liquefaction-induced drag load on piles and settlements are described. Select ramifications concerning the design of piles in liquefiable soils are also described.- 1 July 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 148 (7) , 04022048
Centrifuge Model Tests of Liquefaction-Induced Downdrag on Piles in Uniform Liquefiable Deposits
Earthquake-induced soil liquefaction can cause settlement around piles, which can translate to negative skin friction and the development of drag load and settlement of the piles. A series of centrifuge model tests were performed to assess liquefaction-induced downdrag and understand the interplay and effects of (1) pile embedment and pile-head load, (2) excess pore pressure generation and dissipation, and (3) reconsolidation and ground settlement on pile response during and postshaking. The model included a layered soil profile (clay, liquefiable sand, and dense sand) with two 635-mm-diameter instrumented piles. One pile was placed with its tip at the bottom of the liquefiable deposit; the other pile was embedded five diameters into the dense sand layer. The model was shaken with multiple earthquake motions with their peak horizontal accelerations ranging from 0.025 to . For each shaking event, the drag load on the piles first decreased during shaking and then increased during reconsolidation, exceeding its preshaking value. With multiple shaking events, the net drag load on the piles increased. The maximum observed drag load was found equal to the drained interface shear strength calculated from the interface friction angle of and a lateral stress coefficient of . Larger drag loads and smaller settlements were observed for the pile embedded deep in the dense sand layer. Most of the pile settlements occurred during shaking; postshaking pile settlement was less than 2% of the pile’s diameter. The mechanisms behind the development of liquefaction-induced drag load on piles and settlements are described. Select ramifications concerning the design of piles in liquefiable soils are also described.