Isolde A. Glissenaar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Isolde A. Glissenaar has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
- Jack Christopher Landy
UiT The Arctic University of Norway, Tromsø, Norway
30 shared publications - David Babb
Centre for Earth Observation Science University of Manitoba Winnipeg MB Canada
11 shared publications Michel Tsamados
Centre for Polar Observation and Modelling, Department of Earth Sciences, University College London, London, United Kingdom
11 shared publications- Stephen Edward Lee Howell
Climate Research Division Environment and Climate Change Canada Toronto ON Canada
11 shared publications - Klaas Folkert Boersma
Royal Netherlands Meteorological Institute (KNMI), Satellite Observations department, De Bilt, The Netherlands
10 shared publications Isidora Anglou
Royal Netherlands Meteorological Institute (KNMI), Satellite Observations department, De Bilt, The Netherlands
9 shared publications
Latest Publications
- Open Access
- 31 August 2026
- Published by Copernicus GmbH in The Cryosphere
- Vol. 20 (9) , 4839-4876
Year-Round High-Resolution Sea Ice Freeboard Retrieval Using ICESat-2 ATL03 Photon Data
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during the melt season due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights using variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds based on photon rate, background rate, and width of the photon distribution to support freeboard estimation. This strategy can smooth ice-ridge-related features and reduce reliability over sea-ice surfaces with complex spatial variations or melt-affected conditions. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained using 25 coincident Sentinel-2/ICESat-2 scenes, discriminates between sea ice, thin ice, and leads under both winter and summer surface conditions. Identified lead segments are used to construct local sea-surface references for freeboard estimation. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %). HRFM better preserves ridge-related heights that are smoothed in ATL07. The classifier attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. Weak-beam retrievals also show encouraging validation performance under the same evaluation framework. During the 1-year demonstration period, the spatial patterns of retrieved freeboard are broadly consistent with the ICESat-2 ATL20 product, while monthly mean differences between the two products reach up to 0.04 m. By improving topographic fidelity and lead detection, HRFM provides a framework for high-resolution freeboard retrieval under both winter and summer surface conditions.
- 31 August 2026
- Published by Copernicus GmbH in The Cryosphere
- Vol. 20 (9) , 4839-4876
Open AccessYear-Round High-Resolution Sea Ice Freeboard Retrieval Using ICESat-2 ATL03 Photon Data
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during the melt season due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights using variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds based on photon rate, background rate, and width of the photon distribution to support freeboard estimation. This strategy can smooth ice-ridge-related features and reduce reliability over sea-ice surfaces with complex spatial variations or melt-affected conditions. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained using 25 coincident Sentinel-2/ICESat-2 scenes, discriminates between sea ice, thin ice, and leads under both winter and summer surface conditions. Identified lead segments are used to construct local sea-surface references for freeboard estimation. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %). HRFM better preserves ridge-related heights that are smoothed in ATL07. The classifier attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. Weak-beam retrievals also show encouraging validation performance under the same evaluation framework. During the 1-year demonstration period, the spatial patterns of retrieved freeboard are broadly consistent with the ICESat-2 ATL20 product, while monthly mean differences between the two products reach up to 0.04 m. By improving topographic fidelity and lead detection, HRFM provides a framework for high-resolution freeboard retrieval under both winter and summer surface conditions.
- Open Access
- 1 June 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Comment on egusphere-2026-766
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during melt seasons due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights at variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds (photon rate, background rate and the width of height distribution) to support freeboard estimation, which smooths small-scale features and reduces reliability over sea ice surface with complex spatial variations or affected by melting. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained on 25 coincident Sentinel-2 images, discriminates between sea ice, thin ice, and leads across seasons. Identified lead segments provide local sea surface references from which freeboard is estimated. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %), while weak-beam retrievals achieve comparable accuracy. HRFM better preserves ridge-related heights that are underestimated by ATL07. The classification attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. After applying the method at a pan-Arctic scale, the spatial patterns of retrieved freeboard are consistent with the ICESat-2 ATL20 product, but with seasonal mean differences reaching up to 0.04 m. By improving both topographic fidelity and lead detection, HRFM mitigates common limitations of ICESat-2 sea ice products and enables high-resolution freeboard estimates across seasons.
- 1 June 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Open AccessComment on egusphere-2026-766
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during melt seasons due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights at variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds (photon rate, background rate and the width of height distribution) to support freeboard estimation, which smooths small-scale features and reduces reliability over sea ice surface with complex spatial variations or affected by melting. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained on 25 coincident Sentinel-2 images, discriminates between sea ice, thin ice, and leads across seasons. Identified lead segments provide local sea surface references from which freeboard is estimated. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %), while weak-beam retrievals achieve comparable accuracy. HRFM better preserves ridge-related heights that are underestimated by ATL07. The classification attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. After applying the method at a pan-Arctic scale, the spatial patterns of retrieved freeboard are consistent with the ICESat-2 ATL20 product, but with seasonal mean differences reaching up to 0.04 m. By improving both topographic fidelity and lead detection, HRFM mitigates common limitations of ICESat-2 sea ice products and enables high-resolution freeboard estimates across seasons.
- Open Access
- 25 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Comment on egusphere-2026-766
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during melt seasons due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights at variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds (photon rate, background rate and the width of height distribution) to support freeboard estimation, which smooths small-scale features and reduces reliability over sea ice surface with complex spatial variations or affected by melting. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained on 25 coincident Sentinel-2 images, discriminates between sea ice, thin ice, and leads across seasons. Identified lead segments provide local sea surface references from which freeboard is estimated. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %), while weak-beam retrievals achieve comparable accuracy. HRFM better preserves ridge-related heights that are underestimated by ATL07. The classification attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. After applying the method at a pan-Arctic scale, the spatial patterns of retrieved freeboard are consistent with the ICESat-2 ATL20 product, but with seasonal mean differences reaching up to 0.04 m. By improving both topographic fidelity and lead detection, HRFM mitigates common limitations of ICESat-2 sea ice products and enables high-resolution freeboard estimates across seasons.
- 25 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Open AccessComment on egusphere-2026-766
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during melt seasons due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights at variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds (photon rate, background rate and the width of height distribution) to support freeboard estimation, which smooths small-scale features and reduces reliability over sea ice surface with complex spatial variations or affected by melting. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained on 25 coincident Sentinel-2 images, discriminates between sea ice, thin ice, and leads across seasons. Identified lead segments provide local sea surface references from which freeboard is estimated. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %), while weak-beam retrievals achieve comparable accuracy. HRFM better preserves ridge-related heights that are underestimated by ATL07. The classification attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. After applying the method at a pan-Arctic scale, the spatial patterns of retrieved freeboard are consistent with the ICESat-2 ATL20 product, but with seasonal mean differences reaching up to 0.04 m. By improving both topographic fidelity and lead detection, HRFM mitigates common limitations of ICESat-2 sea ice products and enables high-resolution freeboard estimates across seasons.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Advancing Arctic summer sea ice freeboard from ICESat-2
The ICESat-2 laser altimeter was launched in 2018 and has been measuring surface elevation used to determine sea ice thickness. The sea ice freeboards during winter (November-April) show strong agreement with in-situ observations. However, meltwater ponds accumulating on the sea ice over summer have prevented generating valid sea ice thickness observations from ICESat-2 in the summer months. Melt ponds hinder the classification of lead surfaces, leading to errors in the sea surface reference.Utilizing more than 80 Sentinel-2 optical images coinciding within 5 minutes with ICESat-2 tracks, we have trained a Gaussian Mixture clustering algorithm that correctly classifies laser returns throughout the melt season. On testing images, the newly developed classification performs considerably better than the ATL07 classification, which was designed to be applied over winter conditions. The new classification was used to create an ICESat-2 summer laser freeboard dataset. The freeboards were validated with NASA's summer airborne lidar data acquisition campaign over July 2022.The new summer freeboard dataset captures the melt season well, showing a quick decrease in freeboard during the melt of the snowpack in May and June and a slight increase at the start of autumn in September.The summer sea ice freeboard dataset from ICESat-2 provides promising opportunities to calculate year-round sea ice thickness and volume, improve seasonal predictability, validate and improve the representation of sea ice in coupled climate models, and improve shipping risk assessment.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessAdvancing Arctic summer sea ice freeboard from ICESat-2
The ICESat-2 laser altimeter was launched in 2018 and has been measuring surface elevation used to determine sea ice thickness. The sea ice freeboards during winter (November-April) show strong agreement with in-situ observations. However, meltwater ponds accumulating on the sea ice over summer have prevented generating valid sea ice thickness observations from ICESat-2 in the summer months. Melt ponds hinder the classification of lead surfaces, leading to errors in the sea surface reference.Utilizing more than 80 Sentinel-2 optical images coinciding within 5 minutes with ICESat-2 tracks, we have trained a Gaussian Mixture clustering algorithm that correctly classifies laser returns throughout the melt season. On testing images, the newly developed classification performs considerably better than the ATL07 classification, which was designed to be applied over winter conditions. The new classification was used to create an ICESat-2 summer laser freeboard dataset. The freeboards were validated with NASA's summer airborne lidar data acquisition campaign over July 2022.The new summer freeboard dataset captures the melt season well, showing a quick decrease in freeboard during the melt of the snowpack in May and June and a slight increase at the start of autumn in September.The summer sea ice freeboard dataset from ICESat-2 provides promising opportunities to calculate year-round sea ice thickness and volume, improve seasonal predictability, validate and improve the representation of sea ice in coupled climate models, and improve shipping risk assessment.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Comment on egusphere-2026-766
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during melt seasons due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights at variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds (photon rate, background rate and the width of height distribution) to support freeboard estimation, which smooths small-scale features and reduces reliability over sea ice surface with complex spatial variations or affected by melting. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained on 25 coincident Sentinel-2 images, discriminates between sea ice, thin ice, and leads across seasons. Identified lead segments provide local sea surface references from which freeboard is estimated. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %), while weak-beam retrievals achieve comparable accuracy. HRFM better preserves ridge-related heights that are underestimated by ATL07. The classification attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. After applying the method at a pan-Arctic scale, the spatial patterns of retrieved freeboard are consistent with the ICESat-2 ATL20 product, but with seasonal mean differences reaching up to 0.04 m. By improving both topographic fidelity and lead detection, HRFM mitigates common limitations of ICESat-2 sea ice products and enables high-resolution freeboard estimates across seasons.
- 13 March 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Open AccessComment on egusphere-2026-766
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during melt seasons due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights at variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds (photon rate, background rate and the width of height distribution) to support freeboard estimation, which smooths small-scale features and reduces reliability over sea ice surface with complex spatial variations or affected by melting. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained on 25 coincident Sentinel-2 images, discriminates between sea ice, thin ice, and leads across seasons. Identified lead segments provide local sea surface references from which freeboard is estimated. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %), while weak-beam retrievals achieve comparable accuracy. HRFM better preserves ridge-related heights that are underestimated by ATL07. The classification attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. After applying the method at a pan-Arctic scale, the spatial patterns of retrieved freeboard are consistent with the ICESat-2 ATL20 product, but with seasonal mean differences reaching up to 0.04 m. By improving both topographic fidelity and lead detection, HRFM mitigates common limitations of ICESat-2 sea ice products and enables high-resolution freeboard estimates across seasons.
- Open Access
- 13 February 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-45
Year-Round High-Resolution Sea Ice Freeboard Retrieval Using ICESat-2 ATL03 Photon Data
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during melt seasons due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights at variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds (photon rate, background rate and the width of height distribution) to support freeboard estimation, which smooths small-scale features and reduces reliability over sea ice surface with complex spatial variations or affected by melting. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained on 25 coincident Sentinel-2 images, discriminates between sea ice, thin ice, and leads across seasons. Identified lead segments provide local sea surface references from which freeboard is estimated. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %), while weak-beam retrievals achieve comparable accuracy. HRFM better preserves ridge-related heights that are underestimated by ATL07. The classification attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. After applying the method at a pan-Arctic scale, the spatial patterns of retrieved freeboard are consistent with the ICESat-2 ATL20 product, but with seasonal mean differences reaching up to 0.04 m. By improving both topographic fidelity and lead detection, HRFM mitigates common limitations of ICESat-2 sea ice products and enables high-resolution freeboard estimates across seasons.
- 13 February 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-45
Open AccessYear-Round High-Resolution Sea Ice Freeboard Retrieval Using ICESat-2 ATL03 Photon Data
Arctic sea ice freeboard is critical for estimating ice thickness and characterizing surface morphology, yet it remains poorly constrained, especially during melt seasons due to limitations in conventional altimetry products. The ICESat-2 ATL07 product retrieves surface heights at variable along-track segment lengths (10–200 m) and identifies floes and leads using fixed thresholds (photon rate, background rate and the width of height distribution) to support freeboard estimation, which smooths small-scale features and reduces reliability over sea ice surface with complex spatial variations or affected by melting. To address these challenges, we present a year-round, high-resolution (5 m) freeboard retrieval method (HRFM) based directly on ICESat-2 ATL03 photon data. A two-stage denoising strategy is implemented to robustly extract signal photons, while a machine-learning classifier, trained on 25 coincident Sentinel-2 images, discriminates between sea ice, thin ice, and leads across seasons. Identified lead segments provide local sea surface references from which freeboard is estimated. Validation against Airborne Topographic Mapper (ATM) data shows that HRFM reduces the surface-height root-mean-square error (RMSE) for strong beams from 0.12 m (ATL07) to 0.08 m (by 33 %), while weak-beam retrievals achieve comparable accuracy. HRFM better preserves ridge-related heights that are underestimated by ATL07. The classification attains a precision of 0.96 and a recall of 0.95 for lead detection, supporting reliable freeboard estimation. After applying the method at a pan-Arctic scale, the spatial patterns of retrieved freeboard are consistent with the ICESat-2 ATL20 product, but with seasonal mean differences reaching up to 0.04 m. By improving both topographic fidelity and lead detection, HRFM mitigates common limitations of ICESat-2 sea ice products and enables high-resolution freeboard estimates across seasons.
- Top Cited PapersOpen Access
- 13 January 2026
- Published by Copernicus GmbH in The Cryosphere
- Vol. 20 (1) , 183-208
Anticipating CRISTAL: an exploration of multi-frequency satellite altimeter snow depth estimates over Arctic sea ice, 2018–2023
The EU and ESA plan to launch a dual-frequency Ku- and Ka-band polar-orbiting synthetic aperture radar (SAR) altimeter, the Copernicus Polar Ice and Snow Topography Altimeter (CRISTAL), by 2027 to monitor polar sea ice thickness (SIT) and its overlying snow depth, among other applications. However, the interactions of Ku- and Ka-band radar waves with snow and sea ice are not fully understood, demanding further research effort before we can take full advantage of the CRISTAL observations. Here, we use three ongoing altimetry missions to mimic the sensing configuration of CRISTAL over Arctic sea ice and investigate the derived snow depth estimates obtained from dual-frequency altimetry. We apply a physical model for the backscattered radar altimeter echo over sea ice to CryoSat-2's (CS2's) Ku-band altimeter in SAR mode and to the SARAL mission's AltiKa (AK) Ka-band altimeter in low-resolution mode (LRM), and then we compare it to reference laser altimetry observations from ICESat-2 (IS2). ICESat-2 snow freeboards (snow + sea ice) are representative of the air–snow interface, whereas the radar freeboards of AltiKa are expected to represent a height at or close to the air–snow interface, and CryoSat-2 radar freeboards are expected to represent a height at or close to the snow–ice interface. The freeboards from AltiKa and ICESat-2 show similar patterns and distributions; however, the AltiKa freeboards do not thicken at the same rate over winter, implying that Ka-band height estimates can be biased low by 10 cm relative to the snow surface due to uncertain penetration over first-year ice in spring. Previously observed mismatches between radar freeboards and independent airborne reference data have frequently been attributed to radar penetration biases, but they can be significantly reduced by accounting for surface topography when retracking the radar waveforms. Waveform simulations of CRISTAL in its expected sea ice mode reveal that the heights of the detected snow and ice interfaces are more sensitive to multi-scale surface roughness than to snow properties. For late-winter conditions, the simulations suggest that the CRISTAL Ku-band radar retrievals will track a median elevation 3 % of the snow depth above the snow–ice interface because the radar return is dominated by surface scattering from the snow–ice interface which has a consistently smoother footprint-scale slope distribution than the air–snow interface. Significantly more backscatter is simulated to return from the air–snow interface and snow volume at Ka band, with the radar retrievals tracking a median elevation 10 % of the snow depth below the air–snow interface. These model results generally agree with the derived satellite radar freeboards, which are consistently thicker for AltiKa than CryoSat-2, across all measured snow and sea ice conditions.
- 13 January 2026
- Published by Copernicus GmbH in The Cryosphere
- Vol. 20 (1) , 183-208
Top Cited PapersOpen AccessAnticipating CRISTAL: an exploration of multi-frequency satellite altimeter snow depth estimates over Arctic sea ice, 2018–2023
The EU and ESA plan to launch a dual-frequency Ku- and Ka-band polar-orbiting synthetic aperture radar (SAR) altimeter, the Copernicus Polar Ice and Snow Topography Altimeter (CRISTAL), by 2027 to monitor polar sea ice thickness (SIT) and its overlying snow depth, among other applications. However, the interactions of Ku- and Ka-band radar waves with snow and sea ice are not fully understood, demanding further research effort before we can take full advantage of the CRISTAL observations. Here, we use three ongoing altimetry missions to mimic the sensing configuration of CRISTAL over Arctic sea ice and investigate the derived snow depth estimates obtained from dual-frequency altimetry. We apply a physical model for the backscattered radar altimeter echo over sea ice to CryoSat-2's (CS2's) Ku-band altimeter in SAR mode and to the SARAL mission's AltiKa (AK) Ka-band altimeter in low-resolution mode (LRM), and then we compare it to reference laser altimetry observations from ICESat-2 (IS2). ICESat-2 snow freeboards (snow + sea ice) are representative of the air–snow interface, whereas the radar freeboards of AltiKa are expected to represent a height at or close to the air–snow interface, and CryoSat-2 radar freeboards are expected to represent a height at or close to the snow–ice interface. The freeboards from AltiKa and ICESat-2 show similar patterns and distributions; however, the AltiKa freeboards do not thicken at the same rate over winter, implying that Ka-band height estimates can be biased low by 10 cm relative to the snow surface due to uncertain penetration over first-year ice in spring. Previously observed mismatches between radar freeboards and independent airborne reference data have frequently been attributed to radar penetration biases, but they can be significantly reduced by accounting for surface topography when retracking the radar waveforms. Waveform simulations of CRISTAL in its expected sea ice mode reveal that the heights of the detected snow and ice interfaces are more sensitive to multi-scale surface roughness than to snow properties. For late-winter conditions, the simulations suggest that the CRISTAL Ku-band radar retrievals will track a median elevation 3 % of the snow depth above the snow–ice interface because the radar return is dominated by surface scattering from the snow–ice interface which has a consistently smoother footprint-scale slope distribution than the air–snow interface. Significantly more backscatter is simulated to return from the air–snow interface and snow volume at Ka band, with the radar retrievals tracking a median elevation 10 % of the snow depth below the air–snow interface. These model results generally agree with the derived satellite radar freeboards, which are consistently thicker for AltiKa than CryoSat-2, across all measured snow and sea ice conditions.
- Open Access
- 22 September 2025
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 17 (9) , 4627-4650
TROPOMI Level 3 tropospheric NO2 dataset with advanced uncertainty analysis from the ESA CCI+ ECV precursor project
We introduce the new ESA Climate Change Initiative TROPOspheric Monitoring Instrument (TROPOMI) global monthly clear-sky Level 3 (L3) dataset of tropospheric nitrogen dioxide (NO2) for May 2018 to December 2021. The dataset provides spatiotemporally averaged tropospheric NO2 columns, associated averaging kernels, and L3 uncertainties at spatial resolutions of 0.2, 0.5, and 1.0° on a monthly timescale (https://doi.org/10.21944/CCI-NO2-TROPOMI-L3, KNMI, 2025 ). To improve our understanding of what fraction of the Level 2 (L2) uncertainty cancels when averaging over space or time (i.e. the random component of the L2 uncertainty) and what fraction persists despite the averaging (systematic component), we first determine spatial and temporal error correlations for all sources of uncertainty in the L2 retrieval. Spatial error correlations arise mainly from the stratosphere–troposphere correction and from coarse-gridded albedo climatologies used in the L2 air mass factor calculation and have been quantified in previous studies. We find the temporal error correlation in both the stratospheric uncertainty and the air mass factor uncertainty to be 30 %. Using these estimates, the L3 uncertainty budget has been established for every grid cell based on input L2 uncertainties and new methods to estimate spatial and temporal representativeness uncertainties and to propagate measurement uncertainties through space and time. The total relative uncertainty in the resulting L3 dataset is in the range of 15 %–20 % in polluted areas, which is significantly lower than in individual L2 orbit retrievals, and brings the tropospheric NO2 data to within the Global Climate Observing System (GCOS) “goal” and “breakthrough” requirements. Validation of the tropospheric, stratospheric, and total columns confirms better correlation and reduced dispersion in the differences between satellite and ground-based reference data for the L3 data with respect to the underlying L2, albeit with a more pronounced negative bias in the tropospheric columns at pollution hot spots, most probably related to stronger spatial smearing.
- 22 September 2025
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 17 (9) , 4627-4650
Open AccessTROPOMI Level 3 tropospheric NO2 dataset with advanced uncertainty analysis from the ESA CCI+ ECV precursor project
We introduce the new ESA Climate Change Initiative TROPOspheric Monitoring Instrument (TROPOMI) global monthly clear-sky Level 3 (L3) dataset of tropospheric nitrogen dioxide (NO2) for May 2018 to December 2021. The dataset provides spatiotemporally averaged tropospheric NO2 columns, associated averaging kernels, and L3 uncertainties at spatial resolutions of 0.2, 0.5, and 1.0° on a monthly timescale (https://doi.org/10.21944/CCI-NO2-TROPOMI-L3, KNMI, 2025 ). To improve our understanding of what fraction of the Level 2 (L2) uncertainty cancels when averaging over space or time (i.e. the random component of the L2 uncertainty) and what fraction persists despite the averaging (systematic component), we first determine spatial and temporal error correlations for all sources of uncertainty in the L2 retrieval. Spatial error correlations arise mainly from the stratosphere–troposphere correction and from coarse-gridded albedo climatologies used in the L2 air mass factor calculation and have been quantified in previous studies. We find the temporal error correlation in both the stratospheric uncertainty and the air mass factor uncertainty to be 30 %. Using these estimates, the L3 uncertainty budget has been established for every grid cell based on input L2 uncertainties and new methods to estimate spatial and temporal representativeness uncertainties and to propagate measurement uncertainties through space and time. The total relative uncertainty in the resulting L3 dataset is in the range of 15 %–20 % in polluted areas, which is significantly lower than in individual L2 orbit retrievals, and brings the tropospheric NO2 data to within the Global Climate Observing System (GCOS) “goal” and “breakthrough” requirements. Validation of the tropospheric, stratospheric, and total columns confirms better correlation and reduced dispersion in the differences between satellite and ground-based reference data for the L3 data with respect to the underlying L2, albeit with a more pronounced negative bias in the tropospheric columns at pollution hot spots, most probably related to stronger spatial smearing.
- Open Access
- 30 July 2025
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 25 (14) , 8229-8254
Influence of nitrogen oxides and volatile organic compounds emission changes on tropospheric ozone variability, trends and radiative effect
Ozone in the troposphere is a prominent pollutant whose production is sensitive to the emissions of nitrogen oxides (NOx) and volatile organic compounds (VOCs). Here, we assess the variation of tropospheric ozone levels, trends, ozone photochemical regimes and radiative effects using the ECHAM6–HAMMOZ chemistry–climate model for the period 1998–2019 and satellite measurements. The global mean simulated trend in tropospheric column ozone (TRCO) for the study period (1998–2019) is 0.89 ppb decade−1. During the overlapping period with Ozone Monitoring Instrument/Microwave Limb Sounder (OMI/MLS) observations (2005–2019), the simulated global mean TRCO trends (1.58 ppb decade−1) show fair agreement with OMI/MLS estimates (1.4 ppb decade−1). The simulations for doubling emissions of NOx (DoubNOx), VOCs (DoubVOC), and halving emissions of NOx (HalfNOx) and VOCs (HalfVOC) show nonlinear responses to ozone trends and tropospheric ozone photochemical regimes. The DoubNOx simulations show VOC-limited regimes over the Indo-Gangetic Plain, eastern China, western Europe and the eastern US, while HalfNOx simulations show NOx-limited regimes over North America and Asia. Emissions changes in NOx (DoubNOx/HalfNOx) influence the shift in tropospheric ozone photochemical regimes compared to VOCs (DoubVOC/HalfVOC). The estimated global mean TO3RE during 1998–2019 from the control (CTL) simulations is 1.21 W m−2. The global mean TO3RE shows enhancement by 0.36 W m−2 in DoubNOx simulations compared to CTL. While TO3RE shows a reduction in other simulations compared to CTL (DoubVOC: −0.005 W m−2, HalfNOx: −0.12 W m−2 and HalfVOC: −0.03 W m−2). We show that emission changes in anthropogenic NOx cause more significant changes in TO3RE than anthropogenic VOCs.
- 30 July 2025
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 25 (14) , 8229-8254
Open AccessInfluence of nitrogen oxides and volatile organic compounds emission changes on tropospheric ozone variability, trends and radiative effect
Ozone in the troposphere is a prominent pollutant whose production is sensitive to the emissions of nitrogen oxides (NOx) and volatile organic compounds (VOCs). Here, we assess the variation of tropospheric ozone levels, trends, ozone photochemical regimes and radiative effects using the ECHAM6–HAMMOZ chemistry–climate model for the period 1998–2019 and satellite measurements. The global mean simulated trend in tropospheric column ozone (TRCO) for the study period (1998–2019) is 0.89 ppb decade−1. During the overlapping period with Ozone Monitoring Instrument/Microwave Limb Sounder (OMI/MLS) observations (2005–2019), the simulated global mean TRCO trends (1.58 ppb decade−1) show fair agreement with OMI/MLS estimates (1.4 ppb decade−1). The simulations for doubling emissions of NOx (DoubNOx), VOCs (DoubVOC), and halving emissions of NOx (HalfNOx) and VOCs (HalfVOC) show nonlinear responses to ozone trends and tropospheric ozone photochemical regimes. The DoubNOx simulations show VOC-limited regimes over the Indo-Gangetic Plain, eastern China, western Europe and the eastern US, while HalfNOx simulations show NOx-limited regimes over North America and Asia. Emissions changes in NOx (DoubNOx/HalfNOx) influence the shift in tropospheric ozone photochemical regimes compared to VOCs (DoubVOC/HalfVOC). The estimated global mean TO3RE during 1998–2019 from the control (CTL) simulations is 1.21 W m−2. The global mean TO3RE shows enhancement by 0.36 W m−2 in DoubNOx simulations compared to CTL. While TO3RE shows a reduction in other simulations compared to CTL (DoubVOC: −0.005 W m−2, HalfNOx: −0.12 W m−2 and HalfVOC: −0.03 W m−2). We show that emission changes in anthropogenic NOx cause more significant changes in TO3RE than anthropogenic VOCs.
- Open Access
- 18 July 2025
- Published by Copernicus GmbH
- Vol. 2024, 1-41
Reply on RC2
The EU and ESA plan to launch a dual-frequency Ku- and Ka-band polar-orbiting synthetic aperture radar (SAR) altimeter, CRISTAL (Copernicus Polar Ice and Snow Topography Altimeter), by 2028 to monitor polar sea ice thickness and its overlying snow depth, among other applications. However, the interactions of Ku- and Ka-band radar waves with snow and sea ice are not fully understood, demanding further research effort before we can take full advantage of the CRISTAL observations. Here, we use three ongoing altimetry missions to mimic the sensing configuration of CRISTAL over Arctic sea ice and investigate the derived snow depth estimates obtained from dual-frequency altimetry. We apply a physical model for the backscattered radar altimeter echo over sea ice to CryoSat-2’s Ku-band altimeter in SAR mode and to the SARAL mission’s AltiKa Ka-band altimeter in low-resolution mode (LRM), then compare to reference laser altimetry observations from ICESat-2. ICESat-2 snow freeboards (snow + sea ice) are representative of the air-snow interface, whereas the radar freeboards of AltiKa are expected to represent a height at or close to the air-snow interface, and CryoSat-2 radar freeboards a height at or close to the snow-ice interface. The freeboards from AltiKa and ICESat-2 show similar patterns and distributions; however, the AltiKa freeboards do not thicken at the same rate over winter, implying that Ka-band height estimates can be biased low by 10 cm relative to the snow surface due to uncertain penetration over first-year ice in spring. Previously-observed mismatches between radar freeboards and independent airborne reference data have been frequently attributed to radar penetration biases, but can be significantly reduced by accounting for surface topography when retracking the radar waveforms. Waveform simulations of CRISTAL in its expected sea ice mode reveal that the heights of the detected snow and ice interfaces are more sensitive to multi-scale surface roughness than snow properties. For late-winter conditions, the simulations suggest that the CRISTAL Ku-band radar retrievals will track a median elevation 3 % above the snow-ice interface, because the radar return is dominated by surface scattering from the snow-ice interface which has a consistently smoother footprint-scale slope distribution than the air-snow interface. Significantly more backscatter is simulated to return from the air-snow interface and snow volume at Ka-band, with the radar retrievals tracking a median elevation 10 % below the air-snow interface. These model results generally agree with the derived satellite radar freeboards, which are consistently thicker for AltiKa than CryoSat-2, across all measured snow and sea ice conditions.
- 18 July 2025
- Published by Copernicus GmbH
- Vol. 2024, 1-41
Open AccessReply on RC2
The EU and ESA plan to launch a dual-frequency Ku- and Ka-band polar-orbiting synthetic aperture radar (SAR) altimeter, CRISTAL (Copernicus Polar Ice and Snow Topography Altimeter), by 2028 to monitor polar sea ice thickness and its overlying snow depth, among other applications. However, the interactions of Ku- and Ka-band radar waves with snow and sea ice are not fully understood, demanding further research effort before we can take full advantage of the CRISTAL observations. Here, we use three ongoing altimetry missions to mimic the sensing configuration of CRISTAL over Arctic sea ice and investigate the derived snow depth estimates obtained from dual-frequency altimetry. We apply a physical model for the backscattered radar altimeter echo over sea ice to CryoSat-2’s Ku-band altimeter in SAR mode and to the SARAL mission’s AltiKa Ka-band altimeter in low-resolution mode (LRM), then compare to reference laser altimetry observations from ICESat-2. ICESat-2 snow freeboards (snow + sea ice) are representative of the air-snow interface, whereas the radar freeboards of AltiKa are expected to represent a height at or close to the air-snow interface, and CryoSat-2 radar freeboards a height at or close to the snow-ice interface. The freeboards from AltiKa and ICESat-2 show similar patterns and distributions; however, the AltiKa freeboards do not thicken at the same rate over winter, implying that Ka-band height estimates can be biased low by 10 cm relative to the snow surface due to uncertain penetration over first-year ice in spring. Previously-observed mismatches between radar freeboards and independent airborne reference data have been frequently attributed to radar penetration biases, but can be significantly reduced by accounting for surface topography when retracking the radar waveforms. Waveform simulations of CRISTAL in its expected sea ice mode reveal that the heights of the detected snow and ice interfaces are more sensitive to multi-scale surface roughness than snow properties. For late-winter conditions, the simulations suggest that the CRISTAL Ku-band radar retrievals will track a median elevation 3 % above the snow-ice interface, because the radar return is dominated by surface scattering from the snow-ice interface which has a consistently smoother footprint-scale slope distribution than the air-snow interface. Significantly more backscatter is simulated to return from the air-snow interface and snow volume at Ka-band, with the radar retrievals tracking a median elevation 10 % below the air-snow interface. These model results generally agree with the derived satellite radar freeboards, which are consistently thicker for AltiKa than CryoSat-2, across all measured snow and sea ice conditions.