Joe RuHe Zhao

The thermal performance of rural building envelopes is mostly non-standardized in Northern China, resulting in significant heat loss. In this study, we take, as an example, the central area of Liaoning province, with the objective of proposing some low-cost and energy-efficient solutions. Through our investigations, we found that heating energy consumption was reduced by 20% and construction costs increased by less than CNY 8000 (USD 1108), which can be accepted by rural residents. In order to achieve this target, the NSGA-II algorithm integrated with Rhino + Grasshopper and EnergyPlus simulation kernel was used to establish a thermal performance optimization model for the heat transfer of rural building envelopes in this severe cold region. Among the above-calculated Pareto optimal solutions, the recommended thickness of insulation layers for room floors, roofs, and external walls was about 70 mm, 50 mm, and 40 mm, respectively. Furthermore, we tried to reduce the window-to-wall ratio as much as possible. Finally, based on both the lower building renovation cost and energy-saving rate, three technical solutions from which rural residents could select, according to their specific needs, are put forward.

In central area of Liaoning province, the thermal performance of rural building envelopes are mostly non-standardized in Northern China, resulting in a significant heat loss. In this study, The objective was to propose some low-cost and energy-efficient solutions. Through a field of inves-tigations, heating energy consumption was saved by 20% and increased construction costs was less than 8000 RMB, which was acceptable for rural residents. In order to achieve this target, NSGA-II algorithm was integrated with Rhino+Grasshopper and EnergyPlus simulation kernel to establish a thermal performance optimization model for heat transfer of the rural building envelopes. Among the above Pareto optimal solutions, the recommended thickness of insulation layer for the room floors, ceilings, and external walls were 70mm, 50mm, and 40mm respectively. Furthermore, try to reduce the window to wall ratio as much as possible. Finally, based on the lower total cost, three technical solutions that rural residents could select according to their specific needs have been put forward.