Balázs Mikó
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Balázs Mikó has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Abdulwahab Mgherony
Óbudai Egyetem
3 shared publications Bálint Varga
Óbuda University, Budapest, Hungary
2 shared publications- Bálint Varga
Óbudai Egyetem
2 shared publications Jozef Beňo
Óbuda University Budapest
2 shared publications- Suratjon Nuriddinov
Doctoral School of Material Science and Technology, Óbuda University Népszínház u. 8, 1081 Budapest, Hungary
2 shared publications - Ágota Drégelyi-Kiss
Bánki Donát Faculty of Mechanical and Safety Engineering, Óbuda University, 1034 Budapest, Hungary
2 shared publications
Latest Publications
- Open Access
- 15 November 2026
- Published by Elsevier in Materials & Design
Statistical evaluation of surface quality after fiber laser Machining of selected engineering materials
- 15 November 2026
- Published by Elsevier in Materials & Design
Open AccessStatistical evaluation of surface quality after fiber laser Machining of selected engineering materials
- 3 August 2026
- Published by Trans Tech Publications, Ltd. in Advances in Science and Technology
- Vol. 181, 149-160
Cylindricity Error by Least Square and Minimum Zone Fitting
The use of geometric tolerances is becoming increasingly common in the field of mechanical engineering, especially for parts with complex shapes and tight tolerances. The tolerancing process, which determines the type and size of tolerances to be applied, requires a multi-purpose analysis. Tolerancing considers the analysis of functional requirements, manufacturability considerations, the proper application of drawing specifications, and the measurement process. In our research, the cylindricity and circularity errors of machined holes are examined as a function of machining parameters and circumstances in different steel materials. The holes investigated in this article were made using three different machining processes - turning, boring and milling - from C45 steel. The aim of the article is to present the least square (LS) and minimum zone (MZ) methods for evaluating the cylindricity error, and to compare the results of the two analyses by statistical methods. In addition to the evaluation based on 264 points recorded on a coordinate measuring machine, the article also presents the deviation of the point cloud created using the Halton-Zeremba point sampling method, demonstrating the effect of the number of measurement points on the value of the cylindricity error and the diameter.
- 3 August 2026
- Published by Trans Tech Publications, Ltd. in Advances in Science and Technology
- Vol. 181, 149-160
Cylindricity Error by Least Square and Minimum Zone Fitting
The use of geometric tolerances is becoming increasingly common in the field of mechanical engineering, especially for parts with complex shapes and tight tolerances. The tolerancing process, which determines the type and size of tolerances to be applied, requires a multi-purpose analysis. Tolerancing considers the analysis of functional requirements, manufacturability considerations, the proper application of drawing specifications, and the measurement process. In our research, the cylindricity and circularity errors of machined holes are examined as a function of machining parameters and circumstances in different steel materials. The holes investigated in this article were made using three different machining processes - turning, boring and milling - from C45 steel. The aim of the article is to present the least square (LS) and minimum zone (MZ) methods for evaluating the cylindricity error, and to compare the results of the two analyses by statistical methods. In addition to the evaluation based on 264 points recorded on a coordinate measuring machine, the article also presents the deviation of the point cloud created using the Halton-Zeremba point sampling method, demonstrating the effect of the number of measurement points on the value of the cylindricity error and the diameter.
- 15 May 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Cutting & Tools in Technological System
- No. 104,p. 124-137
EVALUATION OF MACHINABILITY BASED ON CUTTING FORCE AND SURFACE QUALITY CHARACTERISTICS USING THE TOPSIS METHOD
The study proposes a multi-criteria machinability evaluation based on cutting forces, surface quality, and productivity characteristics obtained from CNC milling experiments. Three tool steels (1.2379, 1.2842, and ES Aktuell 1200) and four long-reach milling cutters were tested under controlled machining conditions. The experimental data set, including force components and surface roughness parameters, was analysed using the TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) method to integrate multiple performance indicators into a single metric, referred to as the Cutting Ability Index (CAI). The results show that the proposed approach enables the ranking of material-tool combinations and provides a more comprehensive interpretation of machinability compared to single-parameter evaluations. However, the resulting rankings are sensitive to the selection and balance of input criteria and, in certain cases, deviate from expected physical behaviour. This highlights the limitations of equally weighted multi-criteria approaches and underscores the importance of appropriate parameter selection and weighting. The study confirms that while TOPSIS can serve as an effective decision-support tool in machining analysis, its application requires careful methodological consideration.
- 15 May 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Cutting & Tools in Technological System
- No. 104,p. 124-137
EVALUATION OF MACHINABILITY BASED ON CUTTING FORCE AND SURFACE QUALITY CHARACTERISTICS USING THE TOPSIS METHOD
The study proposes a multi-criteria machinability evaluation based on cutting forces, surface quality, and productivity characteristics obtained from CNC milling experiments. Three tool steels (1.2379, 1.2842, and ES Aktuell 1200) and four long-reach milling cutters were tested under controlled machining conditions. The experimental data set, including force components and surface roughness parameters, was analysed using the TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) method to integrate multiple performance indicators into a single metric, referred to as the Cutting Ability Index (CAI). The results show that the proposed approach enables the ranking of material-tool combinations and provides a more comprehensive interpretation of machinability compared to single-parameter evaluations. However, the resulting rankings are sensitive to the selection and balance of input criteria and, in certain cases, deviate from expected physical behaviour. This highlights the limitations of equally weighted multi-criteria approaches and underscores the importance of appropriate parameter selection and weighting. The study confirms that while TOPSIS can serve as an effective decision-support tool in machining analysis, its application requires careful methodological consideration.
- 15 May 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Cutting & Tools in Technological System
- No. 104,p. 101-112
EFFECT OF THE TURNING INSERT SHAPE AND FEED ON THE SURFACE PROFILE
This study investigates the combined effect of cutting insert geometry and feed rate on surface roughness in turning of 42CrMo4 alloy steel. Controlled experiments were conducted on a CNC lathe using three insert geometries (C, D, and V types) and three feed rates (0.15, 0.25, and 0.35 mm/rev), while maintaining constant cutting speed and depth of cut. Surface characteristics were evaluated through quantitative roughness measurements and qualitative microscopic analysis. The results demonstrate that feed rate is the dominant factor influencing surface roughness, with increasing feed leading to a significant deterioration in surface quality, as reflected by higher Rz and Rt values. Insert geometry also plays a critical role: C and D inserts produce consistently lower roughness values, whereas the V insert results in inferior surface quality under identical cutting conditions. Notably, despite identical nose radii, substantial differences were observed between C and V inserts, highlighting the pronounced influence of edge geometry, particularly the end cutting edge angle. The findings indicate that conventional geometric models based solely on feed and nose radius are insufficient to accurately predict surface roughness. Instead, insert shape parameters must also be considered. This study contributes to improved understanding of the interaction between tool geometry and machining parameters and provides practical guidance for optimizing surface quality in turning operations.
- 15 May 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Cutting & Tools in Technological System
- No. 104,p. 101-112
EFFECT OF THE TURNING INSERT SHAPE AND FEED ON THE SURFACE PROFILE
This study investigates the combined effect of cutting insert geometry and feed rate on surface roughness in turning of 42CrMo4 alloy steel. Controlled experiments were conducted on a CNC lathe using three insert geometries (C, D, and V types) and three feed rates (0.15, 0.25, and 0.35 mm/rev), while maintaining constant cutting speed and depth of cut. Surface characteristics were evaluated through quantitative roughness measurements and qualitative microscopic analysis. The results demonstrate that feed rate is the dominant factor influencing surface roughness, with increasing feed leading to a significant deterioration in surface quality, as reflected by higher Rz and Rt values. Insert geometry also plays a critical role: C and D inserts produce consistently lower roughness values, whereas the V insert results in inferior surface quality under identical cutting conditions. Notably, despite identical nose radii, substantial differences were observed between C and V inserts, highlighting the pronounced influence of edge geometry, particularly the end cutting edge angle. The findings indicate that conventional geometric models based solely on feed and nose radius are insufficient to accurately predict surface roughness. Instead, insert shape parameters must also be considered. This study contributes to improved understanding of the interaction between tool geometry and machining parameters and provides practical guidance for optimizing surface quality in turning operations.
- 1 May 2026
- Published by Springer Nature
- p. 289-299
Application of Grinding Process of Large Module Gear Wheels with Finger Abrasives Stone
- 1 May 2026
- Published by Springer Nature
- p. 289-299
Application of Grinding Process of Large Module Gear Wheels with Finger Abrasives Stone
- Open Access
- 16 February 2026
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 143 (3-4) , 1561-1575
Influence of part orientation and spatial placement on the dimensional and surface quality of SLS-printed PA12 components
Additive manufacturing technologies, particularly Selective Laser Sintering (SLS), are gaining industrial relevance due to their ability to produce complex geometries with high mechanical performance. However, ensuring dimensional accuracy and surface quality remains challenging due to factors such as powder particle size, laser power settings, and the thermal conditions inside the build chamber. Advanced quality control methods, including X-ray computed tomography, enable non-destructive evaluation of internal and external features, offering deeper insights into these issues. This study investigates the effects of part orientation and spatial location within the build chamber on the geometric accuracy and surface quality of components produced via SLS-fabricated components. Fifty PA12 parts were produced in five orientations and distributed across three spatial zones. Dimensional measurements, shape deviations, positional accuracy, and surface roughness were assessed using X-ray computed tomography and surface profilometry. Results showed that outer diameters were close to nominal, while inner diameters were consistently undersized by approximately 0.1 mm and Z-directional lengths exhibited orientation-dependent deviations. Positional accuracy remained stable across orientations but was significantly influenced by spatial location, with increased deviations near the build platform edges. Surface roughness was primarily governed by orientation. These findings provide novel evidence on the combined effect of orientation and spatial placement, emphasizing their critical role in achieving dimensional and surface quality in SLS manufacturing.
- 16 February 2026
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 143 (3-4) , 1561-1575
Open AccessInfluence of part orientation and spatial placement on the dimensional and surface quality of SLS-printed PA12 components
Additive manufacturing technologies, particularly Selective Laser Sintering (SLS), are gaining industrial relevance due to their ability to produce complex geometries with high mechanical performance. However, ensuring dimensional accuracy and surface quality remains challenging due to factors such as powder particle size, laser power settings, and the thermal conditions inside the build chamber. Advanced quality control methods, including X-ray computed tomography, enable non-destructive evaluation of internal and external features, offering deeper insights into these issues. This study investigates the effects of part orientation and spatial location within the build chamber on the geometric accuracy and surface quality of components produced via SLS-fabricated components. Fifty PA12 parts were produced in five orientations and distributed across three spatial zones. Dimensional measurements, shape deviations, positional accuracy, and surface roughness were assessed using X-ray computed tomography and surface profilometry. Results showed that outer diameters were close to nominal, while inner diameters were consistently undersized by approximately 0.1 mm and Z-directional lengths exhibited orientation-dependent deviations. Positional accuracy remained stable across orientations but was significantly influenced by spatial location, with increased deviations near the build platform edges. Surface roughness was primarily governed by orientation. These findings provide novel evidence on the combined effect of orientation and spatial placement, emphasizing their critical role in achieving dimensional and surface quality in SLS manufacturing.
- Open Access
- 2 June 2025
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Mechanical Engineering
- Vol. 69 (2) , 182-191
Regression Analysis and Neural Network Model of Working Diameter of Ball-end Mill
In ball-end milling, a clear distinction exists between the nominal and the working (or effective) diameters, particularly when machining free-form surfaces. The working diameter is not constant; instead, it changes dynamically based on several factors, including the surface inclination (AN2), tool diameter (D), depth of cut (ap), and feed direction (Af). Accurately predicting the working diameter is essential for improving surface quality and dimensional accuracy. Three primary approaches are commonly used for this purpose: the geometric model, which analytically describes the geometric relationships between machining parameters and the working diameter; regression analysis, which builds mathematical models from empirical data; and artificial neural network (ANN) models, which are capable of modeling complex, non-linear interactions between multiple input variables and the working diameter. In this study, one geometric model, two types of regression models, and two ANN models were developed and evaluated. Their performance was assessed using a set of statistical measures, including the standard deviation of the prediction error, the coefficient of determination (R2), the root mean square error (RMSE), and the mean absolute percentage error (MAPE). These metrics provided a comprehensive basis for comparing the accuracy and reliability of each approach. The results highlight the strengths and limitations of each method in capturing the variability of the working diameter during ball-end milling of free-form surfaces.
- 2 June 2025
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Mechanical Engineering
- Vol. 69 (2) , 182-191
Open AccessRegression Analysis and Neural Network Model of Working Diameter of Ball-end Mill
In ball-end milling, a clear distinction exists between the nominal and the working (or effective) diameters, particularly when machining free-form surfaces. The working diameter is not constant; instead, it changes dynamically based on several factors, including the surface inclination (AN2), tool diameter (D), depth of cut (ap), and feed direction (Af). Accurately predicting the working diameter is essential for improving surface quality and dimensional accuracy. Three primary approaches are commonly used for this purpose: the geometric model, which analytically describes the geometric relationships between machining parameters and the working diameter; regression analysis, which builds mathematical models from empirical data; and artificial neural network (ANN) models, which are capable of modeling complex, non-linear interactions between multiple input variables and the working diameter. In this study, one geometric model, two types of regression models, and two ANN models were developed and evaluated. Their performance was assessed using a set of statistical measures, including the standard deviation of the prediction error, the coefficient of determination (R2), the root mean square error (RMSE), and the mean absolute percentage error (MAPE). These metrics provided a comprehensive basis for comparing the accuracy and reliability of each approach. The results highlight the strengths and limitations of each method in capturing the variability of the working diameter during ball-end milling of free-form surfaces.
- Open Access
- 15 June 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Cutting & Tools in Technological System
- No. 100,p. 37-47
INTERPRETATION WORKFLOW OF GEOMETRIC TOLERANCES
The application of the principles of the geometric product specification (GPS) has increasing importance in the machining industry. The tolerancing process should harmonize the relationship between tolerancing, machining process, measuring and design requirements. The aim of the article is to present the interpretation process and the suggested workflow of geometric tolerances. The dimensional and geometric tolerances are compared, and some critical problems of geometric tolerancing are demonstrated by case studies. Застосування принципів геометричної специфікації продукту (ГСП) набуває все більшого значення в обробній промисловості. Процес визначення допуску повинен гармонізувати взаємозв'язок між допуском, процесом механічної обробки, вимірювальними та проектними вимогами. У разі інтерпретації інженерного креслення важливе значення має детальне розуміння відповідних стандартів. Метою дослідження є вивчення процесу визначення допуску, взаємозв'язку між допуском, процесом механічної обробки, вимірювальними та проектними вимогами. Метою статті є представлення процесу інтерпретації та запропонованого робочого процесу призначення геометричних допусків. Деякі критичні проблеми демонструються на прикладах кейсів. Процес допуску повинен визначати тип і значення необхідних допусків. У цьому процесі необхідно враховувати кілька суперечливих аспектів. Першочерговим фактором є функція деталі, роль кожного геометричного елемента. Другим аспектом є врахування виробничих можливостей. Третій аспект - аналіз складальних взаємозв'язків і впливу поширення виробничого браку. Четвертим аспектом є розгляд можливостей вимірювання. Нарешті, ці вимоги повинні бути позначені на кресленні за допомогою інженерних символів, для чого необхідна чіткість і відповідність інженерним нормам. Таким чином, допуск деталі встановлює очікування щодо процесу виготовлення та вимірювання з урахуванням функціональних вимог і, таким чином, визначає вартість деталі. У цій роботі представлений дев'ятиетапний робочий процес, що забезпечує систематичну інтерпретацію кожного елемента інженерного креслення. Запропоновані дев'ять кроків: визначення ознаки допуску, типу допуску, форми зони допуску, розміру зони допуску, тлумачення модифікаторів, визначення місця розташування зони допуску, ступіня свободи зони допуску, аналіз взаємодії між допусками.
- 15 June 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Cutting & Tools in Technological System
- No. 100,p. 37-47
Open AccessINTERPRETATION WORKFLOW OF GEOMETRIC TOLERANCES
The application of the principles of the geometric product specification (GPS) has increasing importance in the machining industry. The tolerancing process should harmonize the relationship between tolerancing, machining process, measuring and design requirements. The aim of the article is to present the interpretation process and the suggested workflow of geometric tolerances. The dimensional and geometric tolerances are compared, and some critical problems of geometric tolerancing are demonstrated by case studies. Застосування принципів геометричної специфікації продукту (ГСП) набуває все більшого значення в обробній промисловості. Процес визначення допуску повинен гармонізувати взаємозв'язок між допуском, процесом механічної обробки, вимірювальними та проектними вимогами. У разі інтерпретації інженерного креслення важливе значення має детальне розуміння відповідних стандартів. Метою дослідження є вивчення процесу визначення допуску, взаємозв'язку між допуском, процесом механічної обробки, вимірювальними та проектними вимогами. Метою статті є представлення процесу інтерпретації та запропонованого робочого процесу призначення геометричних допусків. Деякі критичні проблеми демонструються на прикладах кейсів. Процес допуску повинен визначати тип і значення необхідних допусків. У цьому процесі необхідно враховувати кілька суперечливих аспектів. Першочерговим фактором є функція деталі, роль кожного геометричного елемента. Другим аспектом є врахування виробничих можливостей. Третій аспект - аналіз складальних взаємозв'язків і впливу поширення виробничого браку. Четвертим аспектом є розгляд можливостей вимірювання. Нарешті, ці вимоги повинні бути позначені на кресленні за допомогою інженерних символів, для чого необхідна чіткість і відповідність інженерним нормам. Таким чином, допуск деталі встановлює очікування щодо процесу виготовлення та вимірювання з урахуванням функціональних вимог і, таким чином, визначає вартість деталі. У цій роботі представлений дев'ятиетапний робочий процес, що забезпечує систематичну інтерпретацію кожного елемента інженерного креслення. Запропоновані дев'ять кроків: визначення ознаки допуску, типу допуску, форми зони допуску, розміру зони допуску, тлумачення модифікаторів, визначення місця розташування зони допуску, ступіня свободи зони допуску, аналіз взаємодії між допусками.
- Open Access
- 14 March 2024
- Published by Szechenyi Istvan University in Acta Technica Jaurinensis
- Vol. 17 (2) , 75-83
Tool path planning of ball-end milling of free-form surfaces as a search algorithm
This paper introduces an innovative approach for generating three-axis CNC tool paths for machining free-form surfaces. The method is designed to minimize variations in the effective tool diameter, addressing a common challenge encountered when using ball-end tools for machining free-form surfaces. These surfaces exhibit varying inclinations, leading to fluctuations in the tool’s working diameter from one point to another, resulting in inconsistent cutting speeds and milling parameters despite a constant spindle speed. Consequently, the machined surface tends to lack uniformity. In contrast to conventional tool path planning techniques, the proposed method calculates the working diameter at each adjacent point and guides the tool’s movement towards the point where the smallest change in working diameter is anticipated. This approach reduces fluctuations in cutting speed and promotes the generation of a more homogeneous surface.
- 14 March 2024
- Published by Szechenyi Istvan University in Acta Technica Jaurinensis
- Vol. 17 (2) , 75-83
Open AccessTool path planning of ball-end milling of free-form surfaces as a search algorithm
This paper introduces an innovative approach for generating three-axis CNC tool paths for machining free-form surfaces. The method is designed to minimize variations in the effective tool diameter, addressing a common challenge encountered when using ball-end tools for machining free-form surfaces. These surfaces exhibit varying inclinations, leading to fluctuations in the tool’s working diameter from one point to another, resulting in inconsistent cutting speeds and milling parameters despite a constant spindle speed. Consequently, the machined surface tends to lack uniformity. In contrast to conventional tool path planning techniques, the proposed method calculates the working diameter at each adjacent point and guides the tool’s movement towards the point where the smallest change in working diameter is anticipated. This approach reduces fluctuations in cutting speed and promotes the generation of a more homogeneous surface.
- Open Access
- 11 December 2023
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 130 (3-4) , 1439-1449
The effect of the spindle speed control when milling free-form surfaces
Machining free-form surfaces using ball-end mill is still common, especially for finishing and semi-finishing. However, due to the change in the surface inclination, the working diameter changes from one point to another, which affects the cutting parameters, especially the cutting speed. That means, even with constant spindle speed, the cutting speed varies during the milling process and affects the surface quality. This article defines a new method to keep the cutting speed constant, by calculating the working diameter at each point and changing the spindle speed accordingly. The results of using this method are illustrated, and a comparison was made between the surfaces of five workpieces under different feed directions before and after the optimization. The results emphasize the importance of maintaining a constant cutting speed to obtain a more homogeneous surface.
- 11 December 2023
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 130 (3-4) , 1439-1449
Open AccessThe effect of the spindle speed control when milling free-form surfaces
Machining free-form surfaces using ball-end mill is still common, especially for finishing and semi-finishing. However, due to the change in the surface inclination, the working diameter changes from one point to another, which affects the cutting parameters, especially the cutting speed. That means, even with constant spindle speed, the cutting speed varies during the milling process and affects the surface quality. This article defines a new method to keep the cutting speed constant, by calculating the working diameter at each point and changing the spindle speed accordingly. The results of using this method are illustrated, and a comparison was made between the surfaces of five workpieces under different feed directions before and after the optimization. The results emphasize the importance of maintaining a constant cutting speed to obtain a more homogeneous surface.