Malek Msheik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Malek Msheik has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Stéphane Abanades
CNRS Processes, Materials and Solar Energy Laboratory, PROMES—CNRS, 7 Rue du Four Solaire, 66120 Font-Romeu Odeillo, France
3 shared publications - Sylvain Rodat
Processes, Materials and Solar Energy Laboratory, PROMES-CNRS, 7 rue du Four Solaire, 66120 Font Romeu, France
3 shared publications
Latest Publications
- Open Access
CFD Simulation of a Hybrid Solar/Electric Reactor for Hydrogen and Carbon Production from Methane Cracking
Methane pyrolysis is a transitional technology for environmentally benign hydrogen production with zero greenhouse gas emissions, especially when concentrated solar energy is the heating source for supplying high-temperature process heat. This study is focused on solar methane pyrolysis as an attractive decarbonization process to produce both hydrogen gas and solid carbon with zero CO2 emissions. Direct normal irradiance (DNI) variations arising from inherent solar resource variability (clouds, fog, day-night cycle, etc.) generally hinder continuity and stability of the solar process. Therefore, a novel hybrid solar/electric reactor was designed at PROMES-CNRS laboratory to cope with DNI variations. Such a design features electric heating when the DNI is low and can potentially boost the thermochemical performance of the process when coupled solar/electric heating is applied thanks to an enlarged heated zone. Computational fluid dynamics (CFD) simulations through ANSYS Fluent were performed to investigate the performance of this reactor under different operating conditions. More particularly, the influence of various process parameters including temperature, gas residence time, methane dilution, and hybridization on the methane conversion was assessed. The model combined fluid flow hydrodynamics and heat and mass transfer coupled with gas-phase pyrolysis reactions. Increasing the heating temperature was found to boost methane conversion (91% at 1473 K against ~100% at 1573 K for a coupled solar-electric heating). The increase of inlet gas flow rate Q0 lowered methane conversion since it affected the gas space-time (91% at Q0 = 0.42 NL/min vs. 67% at Q0 = 0.84 NL/min). A coupled heating also resulted in significantly better performance than with only electric heating, because it broadened the hot zone (91% vs. 75% methane conversion for coupled heating and only electric heating, respectively). The model was further validated with experimental results of methane pyrolysis. This study demonstrates the potential of the hybrid reactor for solar-driven methane pyrolysis as a promising route toward clean hydrogen and carbon production and further highlights the role of key parameters to improve the process performance.
Open AccessCFD Simulation of a Hybrid Solar/Electric Reactor for Hydrogen and Carbon Production from Methane Cracking
Methane pyrolysis is a transitional technology for environmentally benign hydrogen production with zero greenhouse gas emissions, especially when concentrated solar energy is the heating source for supplying high-temperature process heat. This study is focused on solar methane pyrolysis as an attractive decarbonization process to produce both hydrogen gas and solid carbon with zero CO2 emissions. Direct normal irradiance (DNI) variations arising from inherent solar resource variability (clouds, fog, day-night cycle, etc.) generally hinder continuity and stability of the solar process. Therefore, a novel hybrid solar/electric reactor was designed at PROMES-CNRS laboratory to cope with DNI variations. Such a design features electric heating when the DNI is low and can potentially boost the thermochemical performance of the process when coupled solar/electric heating is applied thanks to an enlarged heated zone. Computational fluid dynamics (CFD) simulations through ANSYS Fluent were performed to investigate the performance of this reactor under different operating conditions. More particularly, the influence of various process parameters including temperature, gas residence time, methane dilution, and hybridization on the methane conversion was assessed. The model combined fluid flow hydrodynamics and heat and mass transfer coupled with gas-phase pyrolysis reactions. Increasing the heating temperature was found to boost methane conversion (91% at 1473 K against ~100% at 1573 K for a coupled solar-electric heating). The increase of inlet gas flow rate Q0 lowered methane conversion since it affected the gas space-time (91% at Q0 = 0.42 NL/min vs. 67% at Q0 = 0.84 NL/min). A coupled heating also resulted in significantly better performance than with only electric heating, because it broadened the hot zone (91% vs. 75% methane conversion for coupled heating and only electric heating, respectively). The model was further validated with experimental results of methane pyrolysis. This study demonstrates the potential of the hybrid reactor for solar-driven methane pyrolysis as a promising route toward clean hydrogen and carbon production and further highlights the role of key parameters to improve the process performance.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2815 (1)
A new hybrid solar/electric reactor for gas or liquid media methane pyrolysis
Methane cracking for hydrogen production is considered as a clean process without greenhouse gas emissions, provided that the heating source is environmentally friendly. Concentrated solar energy, being clean and renewable, is worth investigating as a heating source for methane pyrolysis. However, solar resource variability hinders the process continuity. Therefore, a hybrid solar/electric reactor has been designed and built at PROMES-CNRS laboratory to overcome this issue. Hybridization allows continuous process operation through combined solar and electrical heating when solar radiation intensity drops (clouds, fogs, etc.). However, during a clear-sky day, it is also possible to activate both heating sources simultaneously. Thus, a more significant part of the reactor is heated, leading to a larger reaction zone and a longer effective residence time yielding higher chemical methane conversion. This unique design is suitable for both gas-phase and molten media methane pyrolysis, offering the possibility to compare both pathways. This paper reports pre-experimental CFD validation results related to pyrolysis in gas-phase to demonstrate the benefits of this reactor. Parameters such as temperature, residence time, methane dilution, and most importantly the hybridization effect are studied in gas-phase pyrolysis. The simulation of liquid media pyrolysis will then be performed accounting for a tri-phase flow combined with chemical reactions. The reactor is currently under experimental testing to validate these numerical results.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2815 (1)
Open AccessA new hybrid solar/electric reactor for gas or liquid media methane pyrolysis
Methane cracking for hydrogen production is considered as a clean process without greenhouse gas emissions, provided that the heating source is environmentally friendly. Concentrated solar energy, being clean and renewable, is worth investigating as a heating source for methane pyrolysis. However, solar resource variability hinders the process continuity. Therefore, a hybrid solar/electric reactor has been designed and built at PROMES-CNRS laboratory to overcome this issue. Hybridization allows continuous process operation through combined solar and electrical heating when solar radiation intensity drops (clouds, fogs, etc.). However, during a clear-sky day, it is also possible to activate both heating sources simultaneously. Thus, a more significant part of the reactor is heated, leading to a larger reaction zone and a longer effective residence time yielding higher chemical methane conversion. This unique design is suitable for both gas-phase and molten media methane pyrolysis, offering the possibility to compare both pathways. This paper reports pre-experimental CFD validation results related to pyrolysis in gas-phase to demonstrate the benefits of this reactor. Parameters such as temperature, residence time, methane dilution, and most importantly the hybridization effect are studied in gas-phase pyrolysis. The simulation of liquid media pyrolysis will then be performed accounting for a tri-phase flow combined with chemical reactions. The reactor is currently under experimental testing to validate these numerical results.
- Top Cited PapersOpen Access
Methane Cracking for Hydrogen Production: A Review of Catalytic and Molten Media Pyrolysis
Currently, hydrogen is mainly generated by steam methane reforming, with significant CO2 emissions, thus exacerbating the greenhouse effect. This environmental concern promotes methane cracking, which represents one of the most promising alternatives for hydrogen production with theoretical zero CO/CO2 emissions. Methane cracking has been intensively investigated using metallic and carbonaceous catalysts. Recently, research has focused on methane pyrolysis in molten metals/salts to prevent both reactor coking and rapid catalyst deactivation frequently encountered in conventional pyrolysis. Another expected advantage is the heat transfer improvement due to the high heat capacity of molten media. Apart from the reaction itself that produces hydrogen and solid carbon, the energy source used in this endothermic process can also contribute to reducing environmental impacts. While most researchers used nonrenewable sources based on fossil fuel combustion or electrical heating, concentrated solar energy has not been thoroughly investigated, to date, for pyrolysis in molten media. However, it could be a promising innovative pathway to further improve hydrogen production sustainability from methane cracking. After recalling the basics of conventional catalytic methane cracking and the developed solar cracking reactors, this review delves into the most significant results of the state-of-the-art methane pyrolysis in melts (molten metals and salts) to show the advantages and the perspectives of this new path, as well as the carbon products’ characteristics and the main factors governing methane conversion.
Top Cited PapersOpen AccessMethane Cracking for Hydrogen Production: A Review of Catalytic and Molten Media Pyrolysis
Currently, hydrogen is mainly generated by steam methane reforming, with significant CO2 emissions, thus exacerbating the greenhouse effect. This environmental concern promotes methane cracking, which represents one of the most promising alternatives for hydrogen production with theoretical zero CO/CO2 emissions. Methane cracking has been intensively investigated using metallic and carbonaceous catalysts. Recently, research has focused on methane pyrolysis in molten metals/salts to prevent both reactor coking and rapid catalyst deactivation frequently encountered in conventional pyrolysis. Another expected advantage is the heat transfer improvement due to the high heat capacity of molten media. Apart from the reaction itself that produces hydrogen and solid carbon, the energy source used in this endothermic process can also contribute to reducing environmental impacts. While most researchers used nonrenewable sources based on fossil fuel combustion or electrical heating, concentrated solar energy has not been thoroughly investigated, to date, for pyrolysis in molten media. However, it could be a promising innovative pathway to further improve hydrogen production sustainability from methane cracking. After recalling the basics of conventional catalytic methane cracking and the developed solar cracking reactors, this review delves into the most significant results of the state-of-the-art methane pyrolysis in melts (molten metals and salts) to show the advantages and the perspectives of this new path, as well as the carbon products’ characteristics and the main factors governing methane conversion.