Daniel Costa Araujo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel Costa Araujo has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Andre Lima Ferrer de Almeida
Federal University of Ceará
10 shared publications Joao C. M. Mota
Group of Wireless Communication Research (GTEL), Ceará, Brazil
3 shared publications- Tarcisio Ferreira Maciel
Université Félix Houphouët-Boigny, Abidjan, Côte d’Ivoire
3 shared publications - Andre Antonio dos Anjos
Department of Telecommunications, Federal University of Uberlndia, Patos de Minas, Brazil
2 shared publications Eleftherios Karipidis
Ericsson Research, Stockholm, Sweden
2 shared publications- Francisco Hugo Costa Neto
Centro de Pesquisa e Desenvolvimento em Telecomunicaes (CPQD), Campinas, Brazil
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5532-5536
Multi-Bit On–Off Digital Noise Modulation
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5532-5536
Open AccessMulti-Bit On–Off Digital Noise Modulation
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5467-5471
On–Off Digital Noise Modulation Under Multi-User Co-Channel Interference
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5467-5471
Open AccessOn–Off Digital Noise Modulation Under Multi-User Co-Channel Interference
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 1
Channel Estimation for Beyond Diagonal RIS Exploiting Core Tensor Sparsity
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 1
Channel Estimation for Beyond Diagonal RIS Exploiting Core Tensor Sparsity
- 28 September 2023
- Published by Elsevier in Computer Communications
- Vol. 212, 161-181
5G-RCOLAB: A system level simulator for 5G and beyond in rural areas
- 28 September 2023
- Published by Elsevier in Computer Communications
- Vol. 212, 161-181
5G-RCOLAB: A system level simulator for 5G and beyond in rural areas
- 21 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 70 (6) , 5734-5748
Uplink Power Control Framework Based on Reinforcement Learning for 5G Networks
In this work, we propose an uplink power control (PC) framework compliant with the technical specifications of the fifth generation (5G) wireless networks. We apply the fundamentals of reinforcement learning (RL) to develop a power control algorithm able to learn a strategy that enhances the total data rate on the uplink channel and mitigates the neighbor cell interference. The base station (BS) uses a set of commands to specify by how much the user equipment (UE) transmit power should change. After implementing such commands, each UE reports a set of information to its serving BS, and this, in turn, predicts the next commands to achieve a suitable UE transmit power level. The BS converts the UE reports into rewards according to a predefined cost function, which impacts the longterm behavior of the UE transmit power. The simulation results indicate a near-optimum performance of the proposed framework in terms of total transmit power, total data rate, and network energy efficiency. It provides a self-exploratory power control strategy that overcomes soft dropping power control (SDPC) with similar signaling levels.
- 21 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 70 (6) , 5734-5748
Uplink Power Control Framework Based on Reinforcement Learning for 5G Networks
In this work, we propose an uplink power control (PC) framework compliant with the technical specifications of the fifth generation (5G) wireless networks. We apply the fundamentals of reinforcement learning (RL) to develop a power control algorithm able to learn a strategy that enhances the total data rate on the uplink channel and mitigates the neighbor cell interference. The base station (BS) uses a set of commands to specify by how much the user equipment (UE) transmit power should change. After implementing such commands, each UE reports a set of information to its serving BS, and this, in turn, predicts the next commands to achieve a suitable UE transmit power level. The BS converts the UE reports into rewards according to a predefined cost function, which impacts the longterm behavior of the UE transmit power. The simulation results indicate a near-optimum performance of the proposed framework in terms of total transmit power, total data rate, and network energy efficiency. It provides a self-exploratory power control strategy that overcomes soft dropping power control (SDPC) with similar signaling levels.
- 3 January 2020
- Published by Wiley in International Journal of Communication Systems
- Vol. 33 (5)
Hybrid beamforming design based on unsupervised machine learning for millimeter wave systems
Summary: This article proposes a hybrid beamforming design with reduced channel state information (CSI) feedback. We use a beam sweeping procedure to provide channel measurements and feed a CSI report scheme. Thereby, the base station (BS) can perform an adequate estimation of the channel characteristics with reduced signaling overhead. Consequently, we need short pilot sequences and very few precoding matrix indicators (PMIs) to properly describe channel behavior. Moreover, we also evaluate different user selection strategies based on unsupervised machine learning framework that exploits the channel information provided by the proposed beam sweeping scheme. Our performance evaluation indicates that the user selection based on fuzzy c‐means is able to efficiently explore the reduced CSI. The proposed hybrid beamforming scheme reduces the multi‐user interference and achieves significant gains in total data rate as channel conditions and interference environment becomes more challenging.
- 3 January 2020
- Published by Wiley in International Journal of Communication Systems
- Vol. 33 (5)
Hybrid beamforming design based on unsupervised machine learning for millimeter wave systems
Summary: This article proposes a hybrid beamforming design with reduced channel state information (CSI) feedback. We use a beam sweeping procedure to provide channel measurements and feed a CSI report scheme. Thereby, the base station (BS) can perform an adequate estimation of the channel characteristics with reduced signaling overhead. Consequently, we need short pilot sequences and very few precoding matrix indicators (PMIs) to properly describe channel behavior. Moreover, we also evaluate different user selection strategies based on unsupervised machine learning framework that exploits the channel information provided by the proposed beam sweeping scheme. Our performance evaluation indicates that the user selection based on fuzzy c‐means is able to efficiently explore the reduced CSI. The proposed hybrid beamforming scheme reduces the multi‐user interference and achieves significant gains in total data rate as channel conditions and interference environment becomes more challenging.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Adaptive Modulation and Coding Based on Reinforcement Learning for 5G Networks
We design a self-exploratory reinforcement learning (RL) framework, based on the Q-learning algorithm, that enables the base station (BS) to choose a suitable modulation and coding scheme (MCS) that maximizes the spectral efficiency while maintaining a low block error rate (BLER). In this framework, the BS chooses the MCS based on the channel quality indicator (CQI) reported by the user equipment (UE). A transmission is made with the chosen MCS and the results of this transmission are converted by the BS into rewards that the BS uses to learn the suitable mapping from CQI to MCS. Comparing with a conventional fixed look-up table and the outer loop link adaptation, the proposed framework achieves superior performance in terms of spectral efficiency and BLER.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Adaptive Modulation and Coding Based on Reinforcement Learning for 5G Networks
We design a self-exploratory reinforcement learning (RL) framework, based on the Q-learning algorithm, that enables the base station (BS) to choose a suitable modulation and coding scheme (MCS) that maximizes the spectral efficiency while maintaining a low block error rate (BLER). In this framework, the BS chooses the MCS based on the channel quality indicator (CQI) reported by the user equipment (UE). A transmission is made with the chosen MCS and the results of this transmission are converted by the BS into rewards that the BS uses to learn the suitable mapping from CQI to MCS. Comparing with a conventional fixed look-up table and the outer loop link adaptation, the proposed framework achieves superior performance in terms of spectral efficiency and BLER.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 594-598
Beam Management Solution Using Q-Learning Framework
The beam management is a procedure that properly selects the beams to overcome strong path loss attenuation. This procedure is specially important in 5G-NR (new radio) deployments that operate in millimeter waves frequencies. We propose a novel beam tracking solution that is based on a reinforcement learning framework. More specifically, using the Q-learning algorithm, the user equipments learn over time the best set of beams to maximize their own signal-to-noise to interference ratio. Our framework takes into account reference signals in the 5G technical specification and propose a measurement protocol to implement the Q-learning. The proposed method shows better spectral efficiency than the beam sweeping technique for the multi-user MIMO case.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 594-598
Beam Management Solution Using Q-Learning Framework
The beam management is a procedure that properly selects the beams to overcome strong path loss attenuation. This procedure is specially important in 5G-NR (new radio) deployments that operate in millimeter waves frequencies. We propose a novel beam tracking solution that is based on a reinforcement learning framework. More specifically, using the Q-learning algorithm, the user equipments learn over time the best set of beams to maximize their own signal-to-noise to interference ratio. Our framework takes into account reference signals in the 5G technical specification and propose a measurement protocol to implement the Q-learning. The proposed method shows better spectral efficiency than the beam sweeping technique for the multi-user MIMO case.
- Open Access
- 29 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 42133-42147
Tensor-Based Channel Estimation for Massive MIMO-OFDM Systems
Channel estimation is a crucial problem for massive multiple input multiple output (MIMO) systems to achieve the expected benefits in terms of spectrum and energy efficiencies. However, a considerable number of pilots are usually distributed over a large number of time-frequency resources using orthogonal frequency division multiplexing (OFDM) to effectively estimate a large number of channel coefficients in the space and frequency domains, sacrificing spectral efficiency. In this work, by assuming MIMO-OFDM transmission, we start by proposing a tensor-based minimum mean square error (MMSE) channel estimator that exploits the multidimensional nature of the frequency-selective massive MIMO channel in the frequency-domain, being a low-complexity alternative to the well-known vector-MMSE channel estimation. Then, by incorporating a 3D sparse representation into the tensor-based channel model, a tensor compressive sensing (tensor-CS) model is formulated by assuming that the channel is compressively sampled in space (radio-frequency chains), time (symbol periods) and frequency (pilot subcarriers). This tensor-CS model is used as the basis for the formulation of a () estimator that solves a greedy problem per dimension of the measured tensor data. The proposed channel estimator has two variants which may either resort to a joint search per tensor dimension or to a sequential search that progressively reduces the search space across the tensor dimensions. The complexities of the different tensor-based algorithms are studied and compared to those of the traditional vector-MMSE and vector-CS estimators. Our results also corroborate the performance-complexity tradeoffs between T-MMSE and T-OMP estimators, both being competing alternatives to their vector-based MMSE and OMP counterparts.
- 29 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 42133-42147
Open AccessTensor-Based Channel Estimation for Massive MIMO-OFDM Systems
Channel estimation is a crucial problem for massive multiple input multiple output (MIMO) systems to achieve the expected benefits in terms of spectrum and energy efficiencies. However, a considerable number of pilots are usually distributed over a large number of time-frequency resources using orthogonal frequency division multiplexing (OFDM) to effectively estimate a large number of channel coefficients in the space and frequency domains, sacrificing spectral efficiency. In this work, by assuming MIMO-OFDM transmission, we start by proposing a tensor-based minimum mean square error (MMSE) channel estimator that exploits the multidimensional nature of the frequency-selective massive MIMO channel in the frequency-domain, being a low-complexity alternative to the well-known vector-MMSE channel estimation. Then, by incorporating a 3D sparse representation into the tensor-based channel model, a tensor compressive sensing (tensor-CS) model is formulated by assuming that the channel is compressively sampled in space (radio-frequency chains), time (symbol periods) and frequency (pilot subcarriers). This tensor-CS model is used as the basis for the formulation of a () estimator that solves a greedy problem per dimension of the measured tensor data. The proposed channel estimator has two variants which may either resort to a joint search per tensor dimension or to a sequential search that progressively reduces the search space across the tensor dimensions. The complexities of the different tensor-based algorithms are studied and compared to those of the traditional vector-MMSE and vector-CS estimators. Our results also corroborate the performance-complexity tradeoffs between T-MMSE and T-OMP estimators, both being competing alternatives to their vector-based MMSE and OMP counterparts.
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Low Complexity Solution for Resource Allocation and SDMA Grouping in Massive MIMO Systems
This work investigates the space-division multiple access grouping problem in multiuser massive multiple input multiple output (MIMO). The adopted approach consists in performing firstly the K-means algorithm, that is a classification algorithm well known in machine learning field, to split mobile stations (MSs) into spatially compatible clusters based on the knowledge of the users' spatial covariance matrices. Secondly, it schedules a sub-set of MSs from each cluster thus supporting multiple spatial streams per cluster. Furthermore, the MSs are selected based on a metric that accounts for the trade-off between their spatial channel correlation and channel gain. The corresponding scheduling is optimally solved by using branch and bound (BB) and best fit (BF) algorithms. Moreover, we compare the proposed solutions with the random scheduler that performs clustering and chooses the MSs to compose the groups at random. The simulation results show that the two proposed solutions, BB and BF outperform, the random scheduler. The BB and BF solutions achieve similar capacity performance, but the first has polynomial-time computational complexity while the second a exponential computational complexity.
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Low Complexity Solution for Resource Allocation and SDMA Grouping in Massive MIMO Systems
This work investigates the space-division multiple access grouping problem in multiuser massive multiple input multiple output (MIMO). The adopted approach consists in performing firstly the K-means algorithm, that is a classification algorithm well known in machine learning field, to split mobile stations (MSs) into spatially compatible clusters based on the knowledge of the users' spatial covariance matrices. Secondly, it schedules a sub-set of MSs from each cluster thus supporting multiple spatial streams per cluster. Furthermore, the MSs are selected based on a metric that accounts for the trade-off between their spatial channel correlation and channel gain. The corresponding scheduling is optimally solved by using branch and bound (BB) and best fit (BF) algorithms. Moreover, we compare the proposed solutions with the random scheduler that performs clustering and chooses the MSs to compose the groups at random. The simulation results show that the two proposed solutions, BB and BF outperform, the random scheduler. The BB and BF solutions achieve similar capacity performance, but the first has polynomial-time computational complexity while the second a exponential computational complexity.