Wei Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wei Liu has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
Yanhua Sun
School of Environment and Life Health Anhui University of Applied Technology Hefei Anhui P. R. China
5 shared publicationsFusheng Zhao
4 shared publications- Qiongyao Zeng
Yunnan Provincial Hospital of Traditional Chinese Medicine, Kunming, 650021, P.R. China
4 shared publications Songfeng Yin
4 shared publicationsHongfang Li
School of Environment and Life Health, Anhui University of Applied Technology, Hefei City, Anhui province, 230011, P.R. China
3 shared publications- Yanhua Sun
School of Environment and Life Health, Anhui University of Applied Technology, Hefei city, Anhui Province 230011, People’s Republic of China
3 shared publications
Latest Publications
- Open Access
- 25 May 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (20) , e73535
A Concise Thermal Synthesis of Nitrogen Doped Mesoporous Carbon/Ti 3 C 2 Nanocomposite Modified Electrode for Sensitive Detection of Isoquercetin
This article is based on Zn‐MOF‐8 and uses a simple thermal synthesis method to prepare nitrogen‐doped mesoporous carbon spheres (NMC), which is then combined with Ti 3 C 2 to prepare NMC/Ti 3 C 2 nanocomposites. It was characterized by SEM, EDS, XPS, FTIR, and electrochemical methods. The NMC/Ti 3 C 2 nanocomposite modified glassy carbon electrode (GCE) was used for sensitive detection of isoquercetin (IQ), achieving a wide linear range of 0.1–100 µM and a low detection limit of 0.073 µM (S/N = 3). The modified electrode also exhibits good selectivity, excellent anti‐interference performance and can be used for actual sample detection.
- 25 May 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (20) , e73535
Open AccessA Concise Thermal Synthesis of Nitrogen Doped Mesoporous Carbon/Ti 3 C 2 Nanocomposite Modified Electrode for Sensitive Detection of Isoquercetin
This article is based on Zn‐MOF‐8 and uses a simple thermal synthesis method to prepare nitrogen‐doped mesoporous carbon spheres (NMC), which is then combined with Ti 3 C 2 to prepare NMC/Ti 3 C 2 nanocomposites. It was characterized by SEM, EDS, XPS, FTIR, and electrochemical methods. The NMC/Ti 3 C 2 nanocomposite modified glassy carbon electrode (GCE) was used for sensitive detection of isoquercetin (IQ), achieving a wide linear range of 0.1–100 µM and a low detection limit of 0.073 µM (S/N = 3). The modified electrode also exhibits good selectivity, excellent anti‐interference performance and can be used for actual sample detection.
- 27 March 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
Sensitive detection of hesperidin in citrus peel using nitrogen doped mesoporous carbon/metal–organic framework composite-modified electrodes
This study synthesized nitrogen-doped mesoporous carbon (NMC) using Zn-MOF-8 as a template, followed by the preparation of ZIF-08/NMC composites via π–π stacking interactions between ZIF-08 and NMC.
- 27 March 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
Sensitive detection of hesperidin in citrus peel using nitrogen doped mesoporous carbon/metal–organic framework composite-modified electrodes
This study synthesized nitrogen-doped mesoporous carbon (NMC) using Zn-MOF-8 as a template, followed by the preparation of ZIF-08/NMC composites via π–π stacking interactions between ZIF-08 and NMC.
- 3 February 2026
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 15 (2)
Sensitive Determination of Dihydromyricetin Using Cubic Ia3d Mesoporous Carbon/Multi-Walled Carbon Nanotube Nanocomposites Modified Electrode
Dihydromyricetin is a flavonoid compound primarily found in Ampelopsis grossedentata, exhibiting significant medicinal value and economic benefits. This study developed Cubic Ia3d structured mesoporous carbon (CMK) multi-walled carbon nanotube (MWCNT) nanocomposites via a convenient method and characterized them with scanning electron microscopy, energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and other techniques. An electrochemical sensor was developed by modifying CMK and MWCNTs nanocomposites onto a glassy carbon electrode, enabling sensitive detection of dihydromyricetin. Under optimal conditions (0.2 M PBS, pH 7.0), the sensor demonstrated excellent performance, with a linear detection range of 0.09–80 μM and a detection limit (signal-to-noise ratio S/N = 3) of 0.028 μM. This sensor can be applied to detect dihydromyricetin in tea leaves prepared from Ampelopsis grossedentata. Additionally, the sensor exhibits strong resistance to interference, excellent stability, and good reproducibility.
- 3 February 2026
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 15 (2)
Sensitive Determination of Dihydromyricetin Using Cubic Ia3d Mesoporous Carbon/Multi-Walled Carbon Nanotube Nanocomposites Modified Electrode
Dihydromyricetin is a flavonoid compound primarily found in Ampelopsis grossedentata, exhibiting significant medicinal value and economic benefits. This study developed Cubic Ia3d structured mesoporous carbon (CMK) multi-walled carbon nanotube (MWCNT) nanocomposites via a convenient method and characterized them with scanning electron microscopy, energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and other techniques. An electrochemical sensor was developed by modifying CMK and MWCNTs nanocomposites onto a glassy carbon electrode, enabling sensitive detection of dihydromyricetin. Under optimal conditions (0.2 M PBS, pH 7.0), the sensor demonstrated excellent performance, with a linear detection range of 0.09–80 μM and a detection limit (signal-to-noise ratio S/N = 3) of 0.028 μM. This sensor can be applied to detect dihydromyricetin in tea leaves prepared from Ampelopsis grossedentata. Additionally, the sensor exhibits strong resistance to interference, excellent stability, and good reproducibility.
- 16 December 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 18 (3) , 604-614
Zn-MOF-8-based nitrogen-doped mesoporous carbon/multi-walled carbon nanotube-modified electrodes for highly sensitive detection of isoquercitrin
In this study, nitrogen-doped mesoporous carbon (NMC) was synthesized using Zn-MOF-8 as a template, followed by further reaction with multi-walled carbon nanotubes (MWCNTs) to prepare the NMC/MWCNTs nanocomposite.
- 16 December 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 18 (3) , 604-614
Zn-MOF-8-based nitrogen-doped mesoporous carbon/multi-walled carbon nanotube-modified electrodes for highly sensitive detection of isoquercitrin
In this study, nitrogen-doped mesoporous carbon (NMC) was synthesized using Zn-MOF-8 as a template, followed by further reaction with multi-walled carbon nanotubes (MWCNTs) to prepare the NMC/MWCNTs nanocomposite.
- 4 September 2025
- Published by Wiley in Electroanalysis
- Vol. 37 (9)
Sensitive Detection of Hesperidin Based on CN‐MWCNTs/Ti3C2 Composite Modified Electrode
In this study, carbon nitride‐multiwalled carbon nanotubes/ MXenes (CN‐MWCNTs/Ti3C2) nanocomposites with excellent properties were synthesized by a convenient method and characterized using various methods. By modifying the CN‐MWCNTs/Ti3C2 composites on glassy carbon electrode, an electrochemical sensor capable of sensitive and rapid detection of hesperidin (HPD) was established. Under the optimal conditions, the sensor showed excellent detection performance for HPD (0.1 M PBS (pH 7.0)). The linear range was 0.05–503 μM, and the detection limit (S/N = 3) was 0.017 μM. In addition, the sensor has the advantages of good immunity to interference, stability and reproducibility.
- 4 September 2025
- Published by Wiley in Electroanalysis
- Vol. 37 (9)
Sensitive Detection of Hesperidin Based on CN‐MWCNTs/Ti3C2 Composite Modified Electrode
In this study, carbon nitride‐multiwalled carbon nanotubes/ MXenes (CN‐MWCNTs/Ti3C2) nanocomposites with excellent properties were synthesized by a convenient method and characterized using various methods. By modifying the CN‐MWCNTs/Ti3C2 composites on glassy carbon electrode, an electrochemical sensor capable of sensitive and rapid detection of hesperidin (HPD) was established. Under the optimal conditions, the sensor showed excellent detection performance for HPD (0.1 M PBS (pH 7.0)). The linear range was 0.05–503 μM, and the detection limit (S/N = 3) was 0.017 μM. In addition, the sensor has the advantages of good immunity to interference, stability and reproducibility.
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 17 (16) , 3210-3219
Sensitive detection of H 2 O 2 based on a MWCNTs/Ti 3 C 2 nanocomposite-modified electrode
In this work, MWCNTs/Ti 3 C 2 nanocomposites were synthesized by a convenient method and characterized in terms of structure and properties by SEM, FT-IR, XPS and electrochemical methods.
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 17 (16) , 3210-3219
Sensitive detection of H 2 O 2 based on a MWCNTs/Ti 3 C 2 nanocomposite-modified electrode
In this work, MWCNTs/Ti 3 C 2 nanocomposites were synthesized by a convenient method and characterized in terms of structure and properties by SEM, FT-IR, XPS and electrochemical methods.
- 1 February 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (2) , 027503
One Step Synthesis of Carbon Nitride/Carbon Nanotube Composite Nanomaterials Modified Electrode for Sensitive Electrochemical Detection of Bisphenol A
In this work, RCN/WCNTs nanocomposites were synthesized using a one-step method and characterized using SEM, XPS, FTIR. An electrochemical sensor capable of sensitive and rapid detection of BPA was developed by modifying RCN/WCNTs nanocomposites on a glassy carbon electrode. The sensor exhibited excellent electrochemical response to BPA in 0.2 M PBS (pH 7.0) under optimal selection conditions. The linear range of the sensor was 0.01–43 μM, and the detection limit (S/N = 3) was 0.0017 μM. In addition, the sensor exhibited good immunity, stability and reproducibility. And it was applied to the detection of real samples.
- 1 February 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (2) , 027503
One Step Synthesis of Carbon Nitride/Carbon Nanotube Composite Nanomaterials Modified Electrode for Sensitive Electrochemical Detection of Bisphenol A
In this work, RCN/WCNTs nanocomposites were synthesized using a one-step method and characterized using SEM, XPS, FTIR. An electrochemical sensor capable of sensitive and rapid detection of BPA was developed by modifying RCN/WCNTs nanocomposites on a glassy carbon electrode. The sensor exhibited excellent electrochemical response to BPA in 0.2 M PBS (pH 7.0) under optimal selection conditions. The linear range of the sensor was 0.01–43 μM, and the detection limit (S/N = 3) was 0.0017 μM. In addition, the sensor exhibited good immunity, stability and reproducibility. And it was applied to the detection of real samples.
- 7 May 2024
- Published by Springer Nature in Microchimica Acta
- Vol. 191 (6) , 1-11
One-step growth of Cu-doped carbon dots in amino-modified carbon nanotube–modified electrodes for sensitive electrochemical detection of BPA
Copper-doped carbon dots and aminated carbon nanotubes (Cu-CDs/NH2-CNTs) nanocomposites were synthesized by a one-step growth method, and the composites were characterized for their performance. An electrochemical sensor for sensitive detection of bisphenol A (BPA) was developed for using Cu-CDs/NH2-CNTs nanocomposites modified with glassy carbon electrodes (GCE). The sensor exhibited an excellent electrochemical response to BPA in 0.2 M PBS (pH 7.0) under optimally selected conditions. The linear range of the sensor for BPA detection was 0.5–160 μM, and the detection limit (S/N = 3) was 0.13 μM. Moreover, the sensor has good interference immunity, stability and reproducibility. In addition, the feasibility of the practical application of the sensor was demonstrated by the detection of BPA in bottled drinking water and Liu Yang River water. Graphical abstract
- 7 May 2024
- Published by Springer Nature in Microchimica Acta
- Vol. 191 (6) , 1-11
One-step growth of Cu-doped carbon dots in amino-modified carbon nanotube–modified electrodes for sensitive electrochemical detection of BPA
Copper-doped carbon dots and aminated carbon nanotubes (Cu-CDs/NH2-CNTs) nanocomposites were synthesized by a one-step growth method, and the composites were characterized for their performance. An electrochemical sensor for sensitive detection of bisphenol A (BPA) was developed for using Cu-CDs/NH2-CNTs nanocomposites modified with glassy carbon electrodes (GCE). The sensor exhibited an excellent electrochemical response to BPA in 0.2 M PBS (pH 7.0) under optimally selected conditions. The linear range of the sensor for BPA detection was 0.5–160 μM, and the detection limit (S/N = 3) was 0.13 μM. Moreover, the sensor has good interference immunity, stability and reproducibility. In addition, the feasibility of the practical application of the sensor was demonstrated by the detection of BPA in bottled drinking water and Liu Yang River water. Graphical abstract
- 2 January 2023
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 41 (1-2) , 3-15
Analysis of solid combustion products to establish a theoretical model of the causes of thermal runaway of ternary lithium-ion battery overcharge and heating
It is difficult to determine whether ternary lithium-ion batteries (t-LIBs) were the “source” of the actual fire scene because of the little available direct evidence left after thermal runaway combustion of lithium-ion batteries (LIBs) and the lack of relevant analytical methods for t-LIBs after complete combustion. As a result, a large number of fires involving t-LIBs are controversially identified as the cause every year. In this paper, we conducted experiments on the two most common thermal runaway types of t-LIBs to investigate the correlation model between their combustion products and thermal runaway types. In the case of overcharge, the combustion products (black powder) of t-LIBs contain aluminum elements, which may be due to the thermal reaction of aluminum. In contrast, in the case of heating, the combustion products of t-LIBs have almost no detectable elemental aluminum. The reason may be due to the ability of the electrode material to continuously decompose and precipitate a large amount of metal oxides under the overcharge condition, which constitutes the condition for the occurrence of the aluminum thermal reaction, making the presence of Al2O3 in the combustion products. However, the lack of continuous current action under the heating condition prevents the generation of the aluminum thermal reaction.
- 2 January 2023
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 41 (1-2) , 3-15
Analysis of solid combustion products to establish a theoretical model of the causes of thermal runaway of ternary lithium-ion battery overcharge and heating
It is difficult to determine whether ternary lithium-ion batteries (t-LIBs) were the “source” of the actual fire scene because of the little available direct evidence left after thermal runaway combustion of lithium-ion batteries (LIBs) and the lack of relevant analytical methods for t-LIBs after complete combustion. As a result, a large number of fires involving t-LIBs are controversially identified as the cause every year. In this paper, we conducted experiments on the two most common thermal runaway types of t-LIBs to investigate the correlation model between their combustion products and thermal runaway types. In the case of overcharge, the combustion products (black powder) of t-LIBs contain aluminum elements, which may be due to the thermal reaction of aluminum. In contrast, in the case of heating, the combustion products of t-LIBs have almost no detectable elemental aluminum. The reason may be due to the ability of the electrode material to continuously decompose and precipitate a large amount of metal oxides under the overcharge condition, which constitutes the condition for the occurrence of the aluminum thermal reaction, making the presence of Al2O3 in the combustion products. However, the lack of continuous current action under the heating condition prevents the generation of the aluminum thermal reaction.