Dominik Theiner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dominik Theiner has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Karl Unterrainer
7 shared publicationsJuraj Darmo
6 shared publications- Michael Jaidl
Photonics Institute TU Wien Gußhausstraße 27-29 1040 Vienna Austria
6 shared publications - Benedikt Limbacher
Photonics Institute, TU Wien 1 , 1040 Vienna, Austria
5 shared publications - Aaron Maxwell Andrews
Center for Micro- and Nanostructures, TU Wien, Vienna, Austria
4 shared publications - Gottfried Strasser
Institute of Solid State Electronics E362, Technische Universität Wien
4 shared publications
Latest Publications
- Open Access
- 10 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 44042-44050
Tunable comb operation in terahertz quantum cascade ring lasers
We demonstrate a versatile and compact approach to generate and control terahertz frequency combs by applying radio frequency modulation to a ring-shaped quantum cascade laser. By harmonically driving the device well above threshold, we induce the formation of phase-coherent sidebands with tunable spacing across a broad radio frequency range (1.5–14.5 GHz), independent of the laser’s cavity modes. The RF generated comb exhibits narrow beat notes with linewidths down to 3.5 Hz and a linear phase profile, as verified by optical beat note analysis, indicating the important role of the phase modulation. Unlike classical phase modulation, we observe a simultaneous increase in total terahertz output power and driving current, reflecting an enhanced laser efficiency and photon-assisted transport. The presented approach enables flexible manipulation of frequency grids and spectral power distribution in both single-mode and multimode regimes, including subharmonic injection locking for spectral broadening. Our results highlight the potential of radio frequency-modulated quantum cascade lasers as customizable, high-efficiency terahertz comb sources for spectroscopy, sensing, and communication applications.
- 10 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 44042-44050
Open AccessTunable comb operation in terahertz quantum cascade ring lasers
We demonstrate a versatile and compact approach to generate and control terahertz frequency combs by applying radio frequency modulation to a ring-shaped quantum cascade laser. By harmonically driving the device well above threshold, we induce the formation of phase-coherent sidebands with tunable spacing across a broad radio frequency range (1.5–14.5 GHz), independent of the laser’s cavity modes. The RF generated comb exhibits narrow beat notes with linewidths down to 3.5 Hz and a linear phase profile, as verified by optical beat note analysis, indicating the important role of the phase modulation. Unlike classical phase modulation, we observe a simultaneous increase in total terahertz output power and driving current, reflecting an enhanced laser efficiency and photon-assisted transport. The presented approach enables flexible manipulation of frequency grids and spectral power distribution in both single-mode and multimode regimes, including subharmonic injection locking for spectral broadening. Our results highlight the potential of radio frequency-modulated quantum cascade lasers as customizable, high-efficiency terahertz comb sources for spectroscopy, sensing, and communication applications.
- Open Access
- 8 October 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (22) , 38344-38357
Dynamic range limitations of non-coherent continous-wave THz photomixing systems with broadband detectors
The dynamic range of non-coherent continuous-wave (CW) THz photomixing (PM) systems with broadband detectors can be significantly limited by various parasitic effects. Specifically, we examine the generation of parasitic (i) THz and (ii) IR radiation, and (iii) higher harmonics in CW THz PM emitters. (i) The parasitic broadband THz radiation, spanning from 100 to 250 GHz with a total output power of 20 nW, results from not perfectly clean laser spectra. As a result, for a frequency-flat Golay cell detector, the PM-system dynamic range is limited to 32.8 dB at 500 GHz, 26.7 dB at 1 THz, and 8.5 dB at 2.3 THz. In the case of detectors with a frequency-declining responsivity, the dynamic range can drop by ∼10 dB more. (ii) The IR radiation leaking from a PM emitter (≈20 μW) is sensitive to the PM emitter bias, which results in its modulation with an amplitude of about 1.3 μW, when a standard PM-emitter bias modulation is applied. The detected IR radiation could be confused for the THz signal. (iii) Parasitic generation of higher harmonics in PM systems can also limit the system’s dynamic range or create spectral artifacts. However, we show that the harmonics are low at least at ∼1 THz and above. Specifically, they are less than 400 pW for fundamental frequencies above 750 GHz, which is more than 43 dB below the power of the fundamental harmonic. The above-stated values were obtained for a commonly-used PIN-diode photomixer mounted on a Si lens and 1.5 μm distributed-feedback lasers. In general, suppression of these parasitic signals is crucial for non-coherent CW THz PM systems.
- 8 October 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (22) , 38344-38357
Open AccessDynamic range limitations of non-coherent continous-wave THz photomixing systems with broadband detectors
The dynamic range of non-coherent continuous-wave (CW) THz photomixing (PM) systems with broadband detectors can be significantly limited by various parasitic effects. Specifically, we examine the generation of parasitic (i) THz and (ii) IR radiation, and (iii) higher harmonics in CW THz PM emitters. (i) The parasitic broadband THz radiation, spanning from 100 to 250 GHz with a total output power of 20 nW, results from not perfectly clean laser spectra. As a result, for a frequency-flat Golay cell detector, the PM-system dynamic range is limited to 32.8 dB at 500 GHz, 26.7 dB at 1 THz, and 8.5 dB at 2.3 THz. In the case of detectors with a frequency-declining responsivity, the dynamic range can drop by ∼10 dB more. (ii) The IR radiation leaking from a PM emitter (≈20 μW) is sensitive to the PM emitter bias, which results in its modulation with an amplitude of about 1.3 μW, when a standard PM-emitter bias modulation is applied. The detected IR radiation could be confused for the THz signal. (iii) Parasitic generation of higher harmonics in PM systems can also limit the system’s dynamic range or create spectral artifacts. However, we show that the harmonics are low at least at ∼1 THz and above. Specifically, they are less than 400 pW for fundamental frequencies above 750 GHz, which is more than 43 dB below the power of the fundamental harmonic. The above-stated values were obtained for a commonly-used PIN-diode photomixer mounted on a Si lens and 1.5 μm distributed-feedback lasers. In general, suppression of these parasitic signals is crucial for non-coherent CW THz PM systems.
- Open Access
- 16 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (12)
Coupled terahertz quantum cascade wire lasers
We present mutual optical coupling in terahertz (THz) quantum cascade wire laser arrays that are flip-chip bonded to a dielectric substrate. The mounting substrate is patterned for individual electrical contacting of each wire laser of the array. The resulting sandwich-like structure supports wire laser modes with a significant part propagating outside the cavity and mediates the long range coupling. The evanescent field part of the modes couples to the adjoining ridge, which, in turn, leads to mutual optical injection-locking between them. We demonstrate this effect for both geometrically similar and dissimilar wire lasers when biased in pulsed operation with temporally overlapping bias pulses. Finite element simulations confirm our measurement results. By applying time-shifted bias pulses to individual array elements, a controllable optical injection seeding of the wire cavity is achieved. We observe intensity modification of the laser modes with changing bias pulse overlap as a result of the injection locking. By choosing both the physical spacing of the laser ridges and the intensity of the seeding laser correctly, the relative intensities of the favored lasing modes are enhanced up to 95 percent. Understanding the coupling in THz wire laser arrays is important for future device improvements in terms of higher continuous-wave operating temperatures through better thermal dissipation, and higher output power and an improved far field due to controlled coupling of their modes.
- 16 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (12)
Open AccessCoupled terahertz quantum cascade wire lasers
We present mutual optical coupling in terahertz (THz) quantum cascade wire laser arrays that are flip-chip bonded to a dielectric substrate. The mounting substrate is patterned for individual electrical contacting of each wire laser of the array. The resulting sandwich-like structure supports wire laser modes with a significant part propagating outside the cavity and mediates the long range coupling. The evanescent field part of the modes couples to the adjoining ridge, which, in turn, leads to mutual optical injection-locking between them. We demonstrate this effect for both geometrically similar and dissimilar wire lasers when biased in pulsed operation with temporally overlapping bias pulses. Finite element simulations confirm our measurement results. By applying time-shifted bias pulses to individual array elements, a controllable optical injection seeding of the wire cavity is achieved. We observe intensity modification of the laser modes with changing bias pulse overlap as a result of the injection locking. By choosing both the physical spacing of the laser ridges and the intensity of the seeding laser correctly, the relative intensities of the favored lasing modes are enhanced up to 95 percent. Understanding the coupling in THz wire laser arrays is important for future device improvements in terms of higher continuous-wave operating temperatures through better thermal dissipation, and higher output power and an improved far field due to controlled coupling of their modes.
- Open Access
- 27 April 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (10) , 15983-15993
Flexible terahertz gas sensing platform based on substrate-integrated hollow waveguides and an opto-electronic light source
We report on a flexible platform for molecular sensing in the terahertz range. Merging the well-established technologies of near-infrared electro-optic modulation and photomixing realizes a spectrally adaptable terahertz source, which is combined with a new generation of compact gas cells, so-called substrate-integrated hollow waveguides (iHWGs). iHWGs have been developed in the mid-infrared and provide flexibility in the design of the optical absorption path. Here, we demonstrate its suitability for the terahertz domain by presenting its low propagation losses and by measuring rotational transitions of nitrious oxide (N2O). A fast frequency sideband modulation technique results in substantially reduced measurement times and increased accuracy compared to a standard wavelength tuning method.
- 27 April 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (10) , 15983-15993
Open AccessFlexible terahertz gas sensing platform based on substrate-integrated hollow waveguides and an opto-electronic light source
We report on a flexible platform for molecular sensing in the terahertz range. Merging the well-established technologies of near-infrared electro-optic modulation and photomixing realizes a spectrally adaptable terahertz source, which is combined with a new generation of compact gas cells, so-called substrate-integrated hollow waveguides (iHWGs). iHWGs have been developed in the mid-infrared and provide flexibility in the design of the optical absorption path. Here, we demonstrate its suitability for the terahertz domain by presenting its low propagation losses and by measuring rotational transitions of nitrious oxide (N2O). A fast frequency sideband modulation technique results in substantially reduced measurement times and increased accuracy compared to a standard wavelength tuning method.
- Open Access
- 28 February 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (9) , 091106
Silicon integrated terahertz quantum cascade ring laser frequency comb
We demonstrate terahertz quantum cascade lasers realized in “ideal” ring resonators without discontinuities from, e.g., contacting pads. We realize this by mounting rings episide-down on a silicon substrate by a die-bonding technique. This technique allows one to realize ideal conditions for optical confinement as well as heat dissipation and provides the basis for future Si integrated THz devices. The lasers emit light around 3.8 THz and show much reduced threshold current densities. When operated in continuous-wave operation, frequency comb formation with a spectral bandwidth of 70 GHz is observed. Frequency comb operation is indicated by a narrow beat note signal at 8.55 GHz with a signal-to-noise ratio up to 40 dB. The experimentally measured spectral behavior of ring devices is described accurately by the results obtained from numerical simulations based on the Maxwell–Bloch formalism.
- 28 February 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (9) , 091106
Open AccessSilicon integrated terahertz quantum cascade ring laser frequency comb
We demonstrate terahertz quantum cascade lasers realized in “ideal” ring resonators without discontinuities from, e.g., contacting pads. We realize this by mounting rings episide-down on a silicon substrate by a die-bonding technique. This technique allows one to realize ideal conditions for optical confinement as well as heat dissipation and provides the basis for future Si integrated THz devices. The lasers emit light around 3.8 THz and show much reduced threshold current densities. When operated in continuous-wave operation, frequency comb formation with a spectral bandwidth of 70 GHz is observed. Frequency comb operation is indicated by a narrow beat note signal at 8.55 GHz with a signal-to-noise ratio up to 40 dB. The experimentally measured spectral behavior of ring devices is described accurately by the results obtained from numerical simulations based on the Maxwell–Bloch formalism.
- Open Access
- 15 November 2021
- Published by Optica Publishing Group in Optics Letters
- Vol. 46 (22) , 5715-5718
Flexible terahertz opto-electronic frequency comb light source tunable over 3.5 THz
We demonstrate a terahertz (THz) frequency comb that is flexible in terms of its frequency range and the number and spacing of comb lines. We use a combination of near-infrared laser diodes, phase modulation, and opto-electronic frequency conversion. The THz comb lines are characterized to be < 10 M H z by resolving the pressure-dependent collisional broadening of an ammonia molecule rotational mode.
- 15 November 2021
- Published by Optica Publishing Group in Optics Letters
- Vol. 46 (22) , 5715-5718
Open AccessFlexible terahertz opto-electronic frequency comb light source tunable over 3.5 THz
We demonstrate a terahertz (THz) frequency comb that is flexible in terms of its frequency range and the number and spacing of comb lines. We use a combination of near-infrared laser diodes, phase modulation, and opto-electronic frequency conversion. The THz comb lines are characterized to be < 10 M H z by resolving the pressure-dependent collisional broadening of an ammonia molecule rotational mode.
- Open Access
Flexible terahertz opto-electronic frequency comb light source tunable over 3.5 THz
We demonstrate a terahertz (THz) frequency comb that is flexible in terms of its frequency range and the number and spacing of comb lines. We use a combination of near-infrared laser diodes, phase modulation and opto-electronic frequency conversion. The THz comb lines are characterized to be < 10 MHz by resolving the pressure dependent collisional broadening of an ammonia molecule rotational mode.
Open AccessFlexible terahertz opto-electronic frequency comb light source tunable over 3.5 THz
We demonstrate a terahertz (THz) frequency comb that is flexible in terms of its frequency range and the number and spacing of comb lines. We use a combination of near-infrared laser diodes, phase modulation and opto-electronic frequency conversion. The THz comb lines are characterized to be < 10 MHz by resolving the pressure dependent collisional broadening of an ammonia molecule rotational mode.
- Open Access
- 24 May 2021
- Published by Optica Publishing Group in Optica
- Vol. 8 (6) , 780-787
Comb operation in terahertz quantum cascade ring lasers
Ring resonators are an interesting alternative cavity solution to the commonly used ridge-type waveguide for terahertz (THz) quantum cascade lasers. They either support a standing-wave pattern showing spatial hole burning if there are defects implemented or a traveling mode in a defect-free cavity. Here, we report on ring-shaped THz quantum cascade lasers emitting between 3.2 and 4.1 THz operating in four different emission regimes. The presence of defects in the cavities force the THz quantum cascade laser into a standing-wave pattern. The measurements show a complex behavior highlighting the effect of strong confinement and the optical nonlinearities leading to the generation of a harmonic state, as well as to a fundamental comb, exhibiting over 30 equidistant modes and covering a bandwidth of 622 GHz. The results are explained by numerical calculations based on the Maxwell–Bloch formalism, including the linewidth enhancement factor and reflection points. The compact geometry and high output power (4 mW detected) make these devices extremely appealing for on-chip frequency comb applications in the terahertz region.
- 24 May 2021
- Published by Optica Publishing Group in Optica
- Vol. 8 (6) , 780-787
Open AccessComb operation in terahertz quantum cascade ring lasers
Ring resonators are an interesting alternative cavity solution to the commonly used ridge-type waveguide for terahertz (THz) quantum cascade lasers. They either support a standing-wave pattern showing spatial hole burning if there are defects implemented or a traveling mode in a defect-free cavity. Here, we report on ring-shaped THz quantum cascade lasers emitting between 3.2 and 4.1 THz operating in four different emission regimes. The presence of defects in the cavities force the THz quantum cascade laser into a standing-wave pattern. The measurements show a complex behavior highlighting the effect of strong confinement and the optical nonlinearities leading to the generation of a harmonic state, as well as to a fundamental comb, exhibiting over 30 equidistant modes and covering a bandwidth of 622 GHz. The results are explained by numerical calculations based on the Maxwell–Bloch formalism, including the linewidth enhancement factor and reflection points. The compact geometry and high output power (4 mW detected) make these devices extremely appealing for on-chip frequency comb applications in the terahertz region.
- 1 January 2021
- Published by Optica Publishing Group
- p. AM3E.1
Designer Terahertz Frequency Comb Generation
We present a simple method to generate almost arbitrary Terahertz frequency combs, between 0.1 and 3.6 THz with single line linewidths of 10 MHz, based on a robust optical system built from standard fiber-optic components.
- 1 January 2021
- Published by Optica Publishing Group
- p. AM3E.1
Designer Terahertz Frequency Comb Generation
We present a simple method to generate almost arbitrary Terahertz frequency combs, between 0.1 and 3.6 THz with single line linewidths of 10 MHz, based on a robust optical system built from standard fiber-optic components.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 9, 1-2
Gain dynamics in THz QCLs and its implication for THz comb sources
In this contribution we present investigation of the interactions between the individual quantum cascade sections of a heterogeneous terahertz quantum cascade laser and their role in the stable operation of a broadband gain material. We employed THz-pump/THz-probe time domain spectroscopy (TDS) and reveal the spectrally resolved gain recovery time for each quantum cascade section that has multi-exponential decay character. Obtained results are discussed with respect to a frequency comb formation.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 9, 1-2
Gain dynamics in THz QCLs and its implication for THz comb sources
In this contribution we present investigation of the interactions between the individual quantum cascade sections of a heterogeneous terahertz quantum cascade laser and their role in the stable operation of a broadband gain material. We employed THz-pump/THz-probe time domain spectroscopy (TDS) and reveal the spectrally resolved gain recovery time for each quantum cascade section that has multi-exponential decay character. Obtained results are discussed with respect to a frequency comb formation.