Vita Seminog
Research Subjects
Vita Seminog has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Volodymyr Myshak
Institute of Macromolecular Chemistry of the National Academy of Sciences of Ukraine, Kiev, Ukraine
5 shared publications Antonina Barantsova
1 shared publication- Nataliia Kozak
National Academy of Sciences of Ukraine
1 shared publication - Tatiana Dmitrieva
National Academy of Sciences of Ukraine
1 shared publication Tatiana Dmytrieva
1 shared publication- Valery Muzhev
Інститут хімії високомолекулярних сполук НАН України, Україна
1 shared publication
Latest Publications
- Open Access
- 9 August 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Матеріали міжнародної науково-практиченої конференції "Екологія. Людина. Суспільство"
- p. 309-316
Investigation of thermal degradation processes in modified secondary polyethylene-based composites
In the context of a continuous increase in plastic waste volumes, recycling polymers has become of paramount importance. The use of mechano-chemical modification allows for the targeted alteration of the secondary polyethylene (SPE) matrix structure and the creation of durable cross-linked composites. Pyrolysis mass-spectrometry (PMS) has been employed to investigate a process of thermal destruction of the SPE, which was modified using hexamethylenetetramine (HMTA). The introduction of powdered HMTA in the polymer matrix on the basis of SPE, with a view to its mechano-chemical modification, leads to structural changes in the polymer matrix, to the formation of cross chemical bonds between macromolecules in SPE, with the participation of the ionic fragments of the collapse of HMTA, and to high content of gel-fraction of compositions, with increasing of content of HMTA in them.
- 9 August 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Матеріали міжнародної науково-практиченої конференції "Екологія. Людина. Суспільство"
- p. 309-316
Open AccessInvestigation of thermal degradation processes in modified secondary polyethylene-based composites
In the context of a continuous increase in plastic waste volumes, recycling polymers has become of paramount importance. The use of mechano-chemical modification allows for the targeted alteration of the secondary polyethylene (SPE) matrix structure and the creation of durable cross-linked composites. Pyrolysis mass-spectrometry (PMS) has been employed to investigate a process of thermal destruction of the SPE, which was modified using hexamethylenetetramine (HMTA). The introduction of powdered HMTA in the polymer matrix on the basis of SPE, with a view to its mechano-chemical modification, leads to structural changes in the polymer matrix, to the formation of cross chemical bonds between macromolecules in SPE, with the participation of the ionic fragments of the collapse of HMTA, and to high content of gel-fraction of compositions, with increasing of content of HMTA in them.
- Open Access
- 9 August 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Матеріали міжнародної науково-практиченої конференції "Екологія. Людина. Суспільство"
- p. 391-396
Probing the effect and mechanism of an equimolar resorcinol– hexamine complex on the performance of recycled polyethylene – based composites
The features of the mechanochemical modification of recycled polyethylene (r-PE) in the presence of a chemically active compound – an equimolar molecular complex(adduct)of resorcinolandhexamine (RH) are considered. The effect of the additive on the structure and properties of r-PE is studied. Their structural features with the help of methods of FTIR-spectroscopy, X-ray analysis are investigated. Physicomechanical properties, the behavior of the melt flow index of compositions, the effect of RH on the gel fraction content was investigated. At 5 wt.% RH, the gel fraction increased from 1.93% to 59.08%, while the MFI decreased from 1.2 to 0.78 g/10 min; the highest tensile strength and elongation at break were observed at an RH content of 0.3–1.0 wt.%. Based on the results obtained, it was established that the use of RH as a modifying additive to r-PE makes it possible to obtain structurally partially cross-linked polymer materials with increased physical and mechanical characteristics.
- 9 August 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Матеріали міжнародної науково-практиченої конференції "Екологія. Людина. Суспільство"
- p. 391-396
Open AccessProbing the effect and mechanism of an equimolar resorcinol– hexamine complex on the performance of recycled polyethylene – based composites
The features of the mechanochemical modification of recycled polyethylene (r-PE) in the presence of a chemically active compound – an equimolar molecular complex(adduct)of resorcinolandhexamine (RH) are considered. The effect of the additive on the structure and properties of r-PE is studied. Their structural features with the help of methods of FTIR-spectroscopy, X-ray analysis are investigated. Physicomechanical properties, the behavior of the melt flow index of compositions, the effect of RH on the gel fraction content was investigated. At 5 wt.% RH, the gel fraction increased from 1.93% to 59.08%, while the MFI decreased from 1.2 to 0.78 g/10 min; the highest tensile strength and elongation at break were observed at an RH content of 0.3–1.0 wt.%. Based on the results obtained, it was established that the use of RH as a modifying additive to r-PE makes it possible to obtain structurally partially cross-linked polymer materials with increased physical and mechanical characteristics.
- 15 December 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Polymer journal
- Vol. 44 (4) , 255-270
RECYCLING, MODIFICATION AND DEVELOPMENT OF NEW COMPOSITE MATERIALS BASED ON POLYMER WASTE
The review article considers the current problem of environmental pollution with polymer waste. To solve one of the highest priority tasks, their recycling is considered, which is advisable from an economic, practical and scientific point of view. An assessment of the resources of secondary polymeric raw materials was made. The main ways of utilization of polymeric waste are given. The features of polymer waste recycling methods are determined. The issues of modification of polymer wastes are considered and the main methods of compatibilization of polymer mixtures are shown. Particular attention is paid to the methods and mechanisms of compatibilization of polymer composites based on recycled thermoplastics and crumb rubber from waste tires as a means of obtaining new composite polymer materials with valuable performance properties. The dependence of the properties of polymer composites on the filler concentration, particle size and shape, surface treatment methods, type and content, modifying additives and compatibilizers is shown. The creation of polymer composites based on secondary polymers and fillers of various nature contributes to the solution of social and economic problems of polymer waste.
- 15 December 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Polymer journal
- Vol. 44 (4) , 255-270
RECYCLING, MODIFICATION AND DEVELOPMENT OF NEW COMPOSITE MATERIALS BASED ON POLYMER WASTE
The review article considers the current problem of environmental pollution with polymer waste. To solve one of the highest priority tasks, their recycling is considered, which is advisable from an economic, practical and scientific point of view. An assessment of the resources of secondary polymeric raw materials was made. The main ways of utilization of polymeric waste are given. The features of polymer waste recycling methods are determined. The issues of modification of polymer wastes are considered and the main methods of compatibilization of polymer mixtures are shown. Particular attention is paid to the methods and mechanisms of compatibilization of polymer composites based on recycled thermoplastics and crumb rubber from waste tires as a means of obtaining new composite polymer materials with valuable performance properties. The dependence of the properties of polymer composites on the filler concentration, particle size and shape, surface treatment methods, type and content, modifying additives and compatibilizers is shown. The creation of polymer composites based on secondary polymers and fillers of various nature contributes to the solution of social and economic problems of polymer waste.
- 20 September 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Polymer journal
- Vol. 43 (3) , 190-197
ANALYSIS OF THE INFLUENCE OF THE NATURE OF THE FILLER SURFACE ON THE PROPERTIES OF HYBRID ORGANIC-INORGANIC NANOCOMPOSITES BASED ON EPOXY OLIGOMER
The aim of this work was to investigate the influence of the chemical nature of the filler surface on the properties of hybrid organo-inorganic nanocomposites based on epoxy oligomer ED-20 in the presence of nanoscale functional filler of inorganic origin - aerosil, with different surface nature. The influence of the chemical nature of the surface of highly dispersed aerosil on the thermal properties of nanocomposites based on epoxy oligomer ED-20 has been studied. The peculiarities of the process of thermooxidative destruction have been studied. It is shown that the introduction of highly dispersed aerosil in the amount of 0.5% in the epoxy matrix does not lead to changes in the thermal properties of composites, and the nanofiller in the amount of 5% improves thermal stability of composites. The kinetics of the curing process of epoxy nanocomposites was studied by IR-spectroscopy. The influence of the presence of functional groups on the nanofiller surface on rate and the degree of conversion of epoxy groups was determined. The presence of hydroxyl groups on the surface of A-300 contributes to the rate of conversion of epoxy groups to a greater extent, compared with aerosil with a modified surface, which contains on the surface methyl groups capable of blocking reactive groups. It is established that the rate of conversion of epoxy groups in the presence of aerosil decreases in the range of ED-20 > ED-20 + A-300 > ED-20 + AM-300. The sorption properties of epoxy nanocomposites have been studied. It is established that the sorption process proceeds at a higher rate when the matrix is filled with unmodified aerosil. The mechanism of influence of the chemical nature of the filler surface and content on formation and properties of epoxy nanocomposites is discussed.
- 20 September 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Polymer journal
- Vol. 43 (3) , 190-197
ANALYSIS OF THE INFLUENCE OF THE NATURE OF THE FILLER SURFACE ON THE PROPERTIES OF HYBRID ORGANIC-INORGANIC NANOCOMPOSITES BASED ON EPOXY OLIGOMER
The aim of this work was to investigate the influence of the chemical nature of the filler surface on the properties of hybrid organo-inorganic nanocomposites based on epoxy oligomer ED-20 in the presence of nanoscale functional filler of inorganic origin - aerosil, with different surface nature. The influence of the chemical nature of the surface of highly dispersed aerosil on the thermal properties of nanocomposites based on epoxy oligomer ED-20 has been studied. The peculiarities of the process of thermooxidative destruction have been studied. It is shown that the introduction of highly dispersed aerosil in the amount of 0.5% in the epoxy matrix does not lead to changes in the thermal properties of composites, and the nanofiller in the amount of 5% improves thermal stability of composites. The kinetics of the curing process of epoxy nanocomposites was studied by IR-spectroscopy. The influence of the presence of functional groups on the nanofiller surface on rate and the degree of conversion of epoxy groups was determined. The presence of hydroxyl groups on the surface of A-300 contributes to the rate of conversion of epoxy groups to a greater extent, compared with aerosil with a modified surface, which contains on the surface methyl groups capable of blocking reactive groups. It is established that the rate of conversion of epoxy groups in the presence of aerosil decreases in the range of ED-20 > ED-20 + A-300 > ED-20 + AM-300. The sorption properties of epoxy nanocomposites have been studied. It is established that the sorption process proceeds at a higher rate when the matrix is filled with unmodified aerosil. The mechanism of influence of the chemical nature of the filler surface and content on formation and properties of epoxy nanocomposites is discussed.
- 20 December 2017
- Published by Lviv Polytechnic National University in Chemistry & Chemical Technology
- Vol. 11 (4) , 454-458
Modified composites based on poly(ethylene-vinyl acetate) and crumb rubber
- 20 December 2017
- Published by Lviv Polytechnic National University in Chemistry & Chemical Technology
- Vol. 11 (4) , 454-458
Modified composites based on poly(ethylene-vinyl acetate) and crumb rubber
- 15 September 2016
- Published by Lviv Polytechnic National University in Chemistry & Chemical Technology
- Vol. 10 (3) , 299-304
The Study of the Process of Modification of Recycled Polyethylene with Hexamethylenetetramine
Pyrolysis mass-spectrometry (PMS) has been employed to investigate the process of thermal destruction of the secondary polyethylene (SPE), which was modified using hexamethylenetetramine (HMTA). The introduction of powdered HMTA in the polymer matrix on the basis of SPE, with a view to its mechano-chemical modification, leads to structural changes in the polymer matrix, to the formation of cross chemical bonds between macromolecules in SPE with the participation of the ionic fragments of the collapse of HMTA, and to high content of gel-fraction of compositions with increasing of HMTA content in them.
- 15 September 2016
- Published by Lviv Polytechnic National University in Chemistry & Chemical Technology
- Vol. 10 (3) , 299-304
The Study of the Process of Modification of Recycled Polyethylene with Hexamethylenetetramine
Pyrolysis mass-spectrometry (PMS) has been employed to investigate the process of thermal destruction of the secondary polyethylene (SPE), which was modified using hexamethylenetetramine (HMTA). The introduction of powdered HMTA in the polymer matrix on the basis of SPE, with a view to its mechano-chemical modification, leads to structural changes in the polymer matrix, to the formation of cross chemical bonds between macromolecules in SPE with the participation of the ionic fragments of the collapse of HMTA, and to high content of gel-fraction of compositions with increasing of HMTA content in them.