Cyntia Trevisan Soares
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cyntia Trevisan Soares has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Gislaine Ferreira Nogueira
Universidade do Estado de Minas Gerais, Unidade Acadêmica de Passos, Departamento de Ciências Biomédicas e Saúde, Passos, MG, Brasil
6 shared publications - Rafael Augustus de Oliveira
School of Agricultural Engineering, University of Campinas, Campinas 13083-875, SP, Brazil
5 shared publications - Farayde Matta Fakhouri
Poly2 Group, Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Carrer Colom 11, E-08222 Terrassa, Spain
3 shared publications A. A. Santana
Federal Auniversity of Maranhão
1 shared publication- Bianca de Oliveira Leme
School of Agricultural Engineering, University of Campinas, Campinas 13083-875, SP, Brazil
1 shared publication Farayde Matta Fakhouri
Faculty of Engineering, Federal University of Grande Dourados, Dourados, Brazil
1 shared publication
Latest Publications
- Open Access
- 11 January 2023
- Published by MDPI AG in Polysaccharides
- Vol. 4 (1) , 33-50
Anthocyanin-Rich Jamun (Syzygium cumini L.) Pulp Transported on Protein-Coated Ionic Gelation Microparticles of Calcium Alginate: Production and Morphological Characteristics
Jamun (Syzygium cumini L.) is a fruit rich in anthocyanins, an important group of natural pigments, with color ranging from red to blue, soluble in water, highly antioxidant. Despite its great potential for use as a natural dye, its application is a challenge, due to the instability of these compounds in the environmental conditions of processing and storage commonly used by the food industry. Therefore, this study evaluated the microencapsulation of anthocyanin-rich jamun pulp by ionic gelation (IG) and its protein-coating by electrostatic interaction (PC). The effect of the ratio of sodium alginate solids and jamun pulp (1:0.40 to 1:2, w/w) and the concentration of gelatin coating solution (0% to 10%, w/w) on the morphology, water and total protein content and anthocyanins content in the microparticles were evaluated. Visually, the IG particles showed color tones ranging from reddish to purplish, which became less intense and opaque after being submitted to the gelatin coating process. Microscopic images demonstrated that microparticles formed had an irregular and heterogeneous shape with disorganized gel network formation is due to the presence of solid structures of jamun pulp, observed within the microparticles. The greater the concentration of gelatin in the coating solution, the greater the protein adsorption for the formation of the protective layer, ranging from 21.82 ± 0.72% (T1) to 55.87 ± 4.23% (T6). Protein adsorption on the GI resulted in a decrease in moisture content (ranging from 87.04 ± 0.22 to 97.06 ± 0.12%) and anthocyanins contents (ranging from 5.84 ± 0.62 to 0.78 ± 0.14%) in the PC microparticles.
- 11 January 2023
- Published by MDPI AG in Polysaccharides
- Vol. 4 (1) , 33-50
Open AccessAnthocyanin-Rich Jamun (Syzygium cumini L.) Pulp Transported on Protein-Coated Ionic Gelation Microparticles of Calcium Alginate: Production and Morphological Characteristics
Jamun (Syzygium cumini L.) is a fruit rich in anthocyanins, an important group of natural pigments, with color ranging from red to blue, soluble in water, highly antioxidant. Despite its great potential for use as a natural dye, its application is a challenge, due to the instability of these compounds in the environmental conditions of processing and storage commonly used by the food industry. Therefore, this study evaluated the microencapsulation of anthocyanin-rich jamun pulp by ionic gelation (IG) and its protein-coating by electrostatic interaction (PC). The effect of the ratio of sodium alginate solids and jamun pulp (1:0.40 to 1:2, w/w) and the concentration of gelatin coating solution (0% to 10%, w/w) on the morphology, water and total protein content and anthocyanins content in the microparticles were evaluated. Visually, the IG particles showed color tones ranging from reddish to purplish, which became less intense and opaque after being submitted to the gelatin coating process. Microscopic images demonstrated that microparticles formed had an irregular and heterogeneous shape with disorganized gel network formation is due to the presence of solid structures of jamun pulp, observed within the microparticles. The greater the concentration of gelatin in the coating solution, the greater the protein adsorption for the formation of the protective layer, ranging from 21.82 ± 0.72% (T1) to 55.87 ± 4.23% (T6). Protein adsorption on the GI resulted in a decrease in moisture content (ranging from 87.04 ± 0.22 to 97.06 ± 0.12%) and anthocyanins contents (ranging from 5.84 ± 0.62 to 0.78 ± 0.14%) in the PC microparticles.
- Open Access
- 23 February 2022
- Published by MDPI AG in Polysaccharides
- Vol. 3 (1) , 250-263
Development and Characterization of Arrowroot Starch Films Incorporated with Grape Pomace Extract
Grape processing residues are a good source of bioactive and nutritional compounds. The incorporation of grape pomace extract (GPE) in starch films can be a strategy for the elaboration of new food packaging products for applications such as edible films or fruit strips. In this context, the objective of this research was to analyze the effect of incorporation and variation of concentration of GPE (0, 20, 30, and 40% mass/mass starch solids) on the physical chemical properties of arrowroot starch edible films created by casting. The GPE was characterized for moisture content, pH, total titratable acidity, total soluble solids, and anthocyanin content. Starch films with and without GPE were evaluated by analyzing their visual appearance, water activity, water content, thickness, water solubility, and water vapor permeability. The GPE had high water content, acidity, and anthocyanins content. The films with GPE showed a noticeable reddish color, similar to observed for the GPE. Increasing the concentration of GPE in the film resulted in significantly increased (p < 0.05) thickness (from 0.060 to 0.106 mm), water content (from 8.17 to 12.48%), solubility in water (from 13.33 to 33.32%), and water vapor permeability (from 3.72 to 6.65 g.mm/m2 day kPa). GPE increased the hydrophilic portion of the film, in addition to acting as a plasticizer, decreasing the molecular interactions of the polymer chain, and favoring its solubilization, which is desirable for applications such as edible films. The elaboration of arrowroot starch films with the incorporation of grape pomace is a good alternative for the reduction of by-products of grape processing.
- 23 February 2022
- Published by MDPI AG in Polysaccharides
- Vol. 3 (1) , 250-263
Open AccessDevelopment and Characterization of Arrowroot Starch Films Incorporated with Grape Pomace Extract
Grape processing residues are a good source of bioactive and nutritional compounds. The incorporation of grape pomace extract (GPE) in starch films can be a strategy for the elaboration of new food packaging products for applications such as edible films or fruit strips. In this context, the objective of this research was to analyze the effect of incorporation and variation of concentration of GPE (0, 20, 30, and 40% mass/mass starch solids) on the physical chemical properties of arrowroot starch edible films created by casting. The GPE was characterized for moisture content, pH, total titratable acidity, total soluble solids, and anthocyanin content. Starch films with and without GPE were evaluated by analyzing their visual appearance, water activity, water content, thickness, water solubility, and water vapor permeability. The GPE had high water content, acidity, and anthocyanins content. The films with GPE showed a noticeable reddish color, similar to observed for the GPE. Increasing the concentration of GPE in the film resulted in significantly increased (p < 0.05) thickness (from 0.060 to 0.106 mm), water content (from 8.17 to 12.48%), solubility in water (from 13.33 to 33.32%), and water vapor permeability (from 3.72 to 6.65 g.mm/m2 day kPa). GPE increased the hydrophilic portion of the film, in addition to acting as a plasticizer, decreasing the molecular interactions of the polymer chain, and favoring its solubilization, which is desirable for applications such as edible films. The elaboration of arrowroot starch films with the incorporation of grape pomace is a good alternative for the reduction of by-products of grape processing.
- Open Access
- 27 May 2021
- Published by MDPI AG in Polysaccharides
- Vol. 2 (2) , 373-386
Edible Films and Coatings Formulated with Arrowroot Starch as a Non-Conventional Starch Source for Plums Packaging
Increasing environmental awareness has promoted an interest in alternative strategies to common plastics obtained from fossil sources, stimulating research on the use of biodegradable and edible films/coatings obtained from renewable sources such as arrowroot starch. This research work aimed to evaluate the use of arrowroot starch on the formation of edible films and coatings. Increasing the concentration of arrowroot starch (from 1% to 5%, mass/mass) in the film produced by casting resulted in increased water vapor permeability (from 2.20 to 3.68 g mm/m2 day kPa), moisture content (3.22% to 7.95%), increased thickness (from 0.029 to 0.101 mm), and decreased solubility in water (from 22.45% to 13.89%). The films were homogeneous, transparent and manageable, with the exception of the film with 1% starch. Film-forming solutions at concentrations of 0%, 2%, and 4% (mass/mass) of arrowroot starch were prepared and applied to plums to evaluate post-harvest behavior when stored at 25 and 5 °C for 35 days. The 2% coating adhered well to the plums’ surfaces, was bright and was effective in reducing mass loss and respiratory rate, associated with storage temperature of 5 °C. The 4% coating presented an opaque and flocculated appearance.
- 27 May 2021
- Published by MDPI AG in Polysaccharides
- Vol. 2 (2) , 373-386
Open AccessEdible Films and Coatings Formulated with Arrowroot Starch as a Non-Conventional Starch Source for Plums Packaging
Increasing environmental awareness has promoted an interest in alternative strategies to common plastics obtained from fossil sources, stimulating research on the use of biodegradable and edible films/coatings obtained from renewable sources such as arrowroot starch. This research work aimed to evaluate the use of arrowroot starch on the formation of edible films and coatings. Increasing the concentration of arrowroot starch (from 1% to 5%, mass/mass) in the film produced by casting resulted in increased water vapor permeability (from 2.20 to 3.68 g mm/m2 day kPa), moisture content (3.22% to 7.95%), increased thickness (from 0.029 to 0.101 mm), and decreased solubility in water (from 22.45% to 13.89%). The films were homogeneous, transparent and manageable, with the exception of the film with 1% starch. Film-forming solutions at concentrations of 0%, 2%, and 4% (mass/mass) of arrowroot starch were prepared and applied to plums to evaluate post-harvest behavior when stored at 25 and 5 °C for 35 days. The 2% coating adhered well to the plums’ surfaces, was bright and was effective in reducing mass loss and respiratory rate, associated with storage temperature of 5 °C. The 4% coating presented an opaque and flocculated appearance.
- 26 November 2019
- Published by Taylor & Francis in Journal of Microencapsulation
- Vol. 37 (1) , 65-76
Influence of spray drying on bioactive compounds of blackberry pulp microencapsulated with arrowroot starch and gum arabic mixture
The objective of this research work was to obtain blackberry pulp in microencapsulated powder with a of arrowroot starch/gum arabic mixture by spray drying. Experimental design, with 11 runs, was performed to evaluate the effects of inlet air temperature (100-150 °C) and encapsulating agent concentration (1:0.5 - 1:2, blackberry pulp solids: arrowroot starch/gum arabic) on the functional properties of powders. The ascorbic acid content and luminosity of the powder increased with increasing encapsulating agent concentrations, whereas the b* values decreased. Increasing the inlet air temperature and decreasing the encapsulating agent concentration, the content of anthocyanins also increased. The powders were able to reduce Fe+3 and to trap free radicals, showing antioxidant property. The temperature of 143 °C and concentration of encapsulating agent 1:1.78 were the ideal conditions to have high content of ascorbic acid and good content of anthocyanins and antioxidant properties.
- 26 November 2019
- Published by Taylor & Francis in Journal of Microencapsulation
- Vol. 37 (1) , 65-76
Influence of spray drying on bioactive compounds of blackberry pulp microencapsulated with arrowroot starch and gum arabic mixture
The objective of this research work was to obtain blackberry pulp in microencapsulated powder with a of arrowroot starch/gum arabic mixture by spray drying. Experimental design, with 11 runs, was performed to evaluate the effects of inlet air temperature (100-150 °C) and encapsulating agent concentration (1:0.5 - 1:2, blackberry pulp solids: arrowroot starch/gum arabic) on the functional properties of powders. The ascorbic acid content and luminosity of the powder increased with increasing encapsulating agent concentrations, whereas the b* values decreased. Increasing the inlet air temperature and decreasing the encapsulating agent concentration, the content of anthocyanins also increased. The powders were able to reduce Fe+3 and to trap free radicals, showing antioxidant property. The temperature of 143 °C and concentration of encapsulating agent 1:1.78 were the ideal conditions to have high content of ascorbic acid and good content of anthocyanins and antioxidant properties.
- 1 March 2019
- Published by Elsevier in Food Chemistry
- Vol. 275, 417-425
Bioactive films of arrowroot starch and blackberry pulp: Physical, mechanical and barrier properties and stability to pH and sterilization
- 1 March 2019
- Published by Elsevier in Food Chemistry
- Vol. 275, 417-425
Bioactive films of arrowroot starch and blackberry pulp: Physical, mechanical and barrier properties and stability to pH and sterilization
- Open Access
- 11 September 2018
- Published by Universitat Politecnica de Valencia
- p. 1
Vitamin C content of freeze dried pequi (Caryocar brasiliense Camb.) pulp
Vitamin C is one of the constituents of pequi pulp. It is a natural antioxidant, capable of sequestering free radicals. The present study aimed to freeze dry a pequi pulp encapsulated with maltodextrin and whey protein and analyze vitamin C content. Vitamin C loss was lower in the experimental run that did not use encapsulating agent. Whereas, the run that used 15% of whey protein concentrate as encapsulant agent in relation to pequi solids presented the highest value (220.74 mg vitamin C / g pequi solids). Freeze drying of pequi pulp is a technique for vitamin C conservation independently of the variation in maltodextrin and whey protein proportion.Keywords: drying; encapsulating agent; ascorbic acid.
- 11 September 2018
- Published by Universitat Politecnica de Valencia
- p. 1
Open AccessVitamin C content of freeze dried pequi (Caryocar brasiliense Camb.) pulp
Vitamin C is one of the constituents of pequi pulp. It is a natural antioxidant, capable of sequestering free radicals. The present study aimed to freeze dry a pequi pulp encapsulated with maltodextrin and whey protein and analyze vitamin C content. Vitamin C loss was lower in the experimental run that did not use encapsulating agent. Whereas, the run that used 15% of whey protein concentrate as encapsulant agent in relation to pequi solids presented the highest value (220.74 mg vitamin C / g pequi solids). Freeze drying of pequi pulp is a technique for vitamin C conservation independently of the variation in maltodextrin and whey protein proportion.Keywords: drying; encapsulating agent; ascorbic acid.