Irina Polyanskikh
Research Subjects
Irina Polyanskikh has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Grigory Yakovlev
Kalashnikov Izhevsk State Technical University
13 shared publications - Aleksandr Nikolaevich Gumenyuk
Kalashnikov Izhevsk State Technical University
7 shared publications - Anastasiya Fedorovna Gordina
Kalashnikov Izhevsk State Technical University
7 shared publications - Grigory Pervushin
Kalashnikov Izhevsk State Technical University
3 shared publications - Igor Pudov
Department of Geotechnical Engineering and Building Materials, Kalashnikov Izhevsk State Technical University, Studencheskaya str. 7, 426009 Izhevsk, Russia
3 shared publications - Olga Smirnova
Saint-Petersburg Mining University
3 shared publications
Latest Publications
- 26 May 2023
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1089, 145-152
Properties of Cement-Based Composites Modified with Metal/Carbon Nanocomposite
The objective of this research is to study and analyse the properties of a cement-based composite modified with nickel/carbon nanocomposite (Ni/C NC). According to previous studies carried out by scientists in the field of nanostructures, it was assumed that metal/carbon nanostructures can increase the strength and impart electrically conductive properties to composite materials [9,12]. To confirm this hypothesis, in this research, mechanical strength tests and measurements of the electrical resistance of the modified samples were carried out. It was found that the addition of nickel/carbon nanocomposite in the amount of 0.05% increases the compressive strength of silicate composites by 35%. Moreover, by measuring the electrical conductivity of the samples, it was established that with the introduction of additives in the amount of 0.01-0.05% in relation to Portland cement, the resistance decreases by 80-84%. Further, the structural effect of Ni/C NC on the cement matrix was studied by the methods of IR spectral, differential thermal analyses, X-ray microanalysis. As a result of the analysis, it was revealed that the dispersions are crystallization centers during cement hydration and create chemical bonds with silicon oxide in the composition of the silicate composite. Ni/C NC has a structuring effect on the silicate binder matrix through the formation of a denser packing, which affects the mechanical properties and electrical conductivity of the material. The results of the study can be used to obtain electrically conductive materials with desired properties that can perform the functions of heating, monitoring the state of structures during operation, and protecting against an electromagnetic pulse.
- 26 May 2023
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1089, 145-152
Properties of Cement-Based Composites Modified with Metal/Carbon Nanocomposite
The objective of this research is to study and analyse the properties of a cement-based composite modified with nickel/carbon nanocomposite (Ni/C NC). According to previous studies carried out by scientists in the field of nanostructures, it was assumed that metal/carbon nanostructures can increase the strength and impart electrically conductive properties to composite materials [9,12]. To confirm this hypothesis, in this research, mechanical strength tests and measurements of the electrical resistance of the modified samples were carried out. It was found that the addition of nickel/carbon nanocomposite in the amount of 0.05% increases the compressive strength of silicate composites by 35%. Moreover, by measuring the electrical conductivity of the samples, it was established that with the introduction of additives in the amount of 0.01-0.05% in relation to Portland cement, the resistance decreases by 80-84%. Further, the structural effect of Ni/C NC on the cement matrix was studied by the methods of IR spectral, differential thermal analyses, X-ray microanalysis. As a result of the analysis, it was revealed that the dispersions are crystallization centers during cement hydration and create chemical bonds with silicon oxide in the composition of the silicate composite. Ni/C NC has a structuring effect on the silicate binder matrix through the formation of a denser packing, which affects the mechanical properties and electrical conductivity of the material. The results of the study can be used to obtain electrically conductive materials with desired properties that can perform the functions of heating, monitoring the state of structures during operation, and protecting against an electromagnetic pulse.
- Open Access
- 25 April 2023
- Published by MDPI AG in Construction Materials
- Vol. 3 (2) , 202-216
Effect of Electrochemical Corrosion on the Properties of Modified Concrete
Analysis of the use of reinforced concrete structures confirmed the destruction of reinforced products based on Portland cement due to stray currents, which makes it impossible to achieve the required durability and reliability of structures. The present work shows the results of a study on the diffusion permeability of samples with different degrees of electrical conductivity. The relative value of the electrode potential was measured by the open circuit potential method. The novelty of this work is its analysis of the quantitative and qualitative characteristics of the structure of the mineral matrix with specified electrical properties after long-term exposure to electrochemical corrosion. In this work, an assessment was carried out, for the first time, on the effects of electrochemical corrosion on modified composites with predominantly electrically conductive and electrically insulating properties. An increase in the electrical conductivity of the composite was found to reduce the potential difference. The use of such composites helped protect the reinforcement from electrochemical corrosion.
- 25 April 2023
- Published by MDPI AG in Construction Materials
- Vol. 3 (2) , 202-216
Open AccessEffect of Electrochemical Corrosion on the Properties of Modified Concrete
Analysis of the use of reinforced concrete structures confirmed the destruction of reinforced products based on Portland cement due to stray currents, which makes it impossible to achieve the required durability and reliability of structures. The present work shows the results of a study on the diffusion permeability of samples with different degrees of electrical conductivity. The relative value of the electrode potential was measured by the open circuit potential method. The novelty of this work is its analysis of the quantitative and qualitative characteristics of the structure of the mineral matrix with specified electrical properties after long-term exposure to electrochemical corrosion. In this work, an assessment was carried out, for the first time, on the effects of electrochemical corrosion on modified composites with predominantly electrically conductive and electrically insulating properties. An increase in the electrical conductivity of the composite was found to reduce the potential difference. The use of such composites helped protect the reinforcement from electrochemical corrosion.
- Open Access
Study of the Structure and Properties of Electrical Sand Concrete under Prolonged Exposure to Sulfate Environment
Destructive processes accompanying sulfate corrosion of concrete significantly affect the durability of products and structures based on Portland cement. In the presented study, the long-term effect of sulfate corrosion on the electrical properties of electrically conductive sand concrete was studied. In the course of the study, the following were tested: an electrically conductive composition and a control composition based on plain Portland cement. The analysis of changes in the mineral composition of the samples over the course of time in an aggressive solution was carried out. The results show that during the exposure period of the samples from 28 to 224 days, the absorption of sulfate ions slows down and averages 26% for the control composition and 29% for the electrically conductive composition, of the total volume of absorbed sulfates. At the same time, the course of sulfate corrosion was accompanied by a 6% increase in the density of samples of both compositions, as well as a cyclic change in mechanical strength within 15%. In its turn, the key indicator of the electrical characteristics of the compositions—electrical resistivity—tended to increase throughout the experiment. These results can be recommended for assessing the durability and the nature of the operating conditions of electrical concretes used in aggressive environments.
Open AccessStudy of the Structure and Properties of Electrical Sand Concrete under Prolonged Exposure to Sulfate Environment
Destructive processes accompanying sulfate corrosion of concrete significantly affect the durability of products and structures based on Portland cement. In the presented study, the long-term effect of sulfate corrosion on the electrical properties of electrically conductive sand concrete was studied. In the course of the study, the following were tested: an electrically conductive composition and a control composition based on plain Portland cement. The analysis of changes in the mineral composition of the samples over the course of time in an aggressive solution was carried out. The results show that during the exposure period of the samples from 28 to 224 days, the absorption of sulfate ions slows down and averages 26% for the control composition and 29% for the electrically conductive composition, of the total volume of absorbed sulfates. At the same time, the course of sulfate corrosion was accompanied by a 6% increase in the density of samples of both compositions, as well as a cyclic change in mechanical strength within 15%. In its turn, the key indicator of the electrical characteristics of the compositions—electrical resistivity—tended to increase throughout the experiment. These results can be recommended for assessing the durability and the nature of the operating conditions of electrical concretes used in aggressive environments.
- 1 January 2022
- Published by Stroymaterialy in Construction Materials
- No. 11
Structure Formation Aspects for Fluoranhydrate-Based Materials
- 1 January 2022
- Published by Stroymaterialy in Construction Materials
- No. 11
Structure Formation Aspects for Fluoranhydrate-Based Materials
- 1 January 2022
- Published by Penza State University of Architecture and Construction in Regional architecture and engineering
- No. 3,p. 69-79
IMPACT OF COMPLEX ADDITIVES ON THE PROPERTIES OF FLUORANHYDRATE-BASED MATERIALS
Приведены результаты исследования комплексного влияния активаторов твердения - сульфата натрия, портландцемента, фосфата натрия - и техногенной добавки - металлургической пыли на физико-технические свойства композиционного материала на основе фторангидрита. Определена оптимальная концентрация добавок (3 % активатора и 0,5-1,5 % металлургической пыли), при которой наблюдается рост физико-технических показателей разработанного материала, таких, как механические характеристики, водопоглощение и коэффициент размягчения. Установлено, что комплексное введение добавок способствует не только более полному переходу нерастворимого сульфата кальция в двуводную модификацию, но и уплотнению структуры...
- 1 January 2022
- Published by Penza State University of Architecture and Construction in Regional architecture and engineering
- No. 3,p. 69-79
IMPACT OF COMPLEX ADDITIVES ON THE PROPERTIES OF FLUORANHYDRATE-BASED MATERIALS
Приведены результаты исследования комплексного влияния активаторов твердения - сульфата натрия, портландцемента, фосфата натрия - и техногенной добавки - металлургической пыли на физико-технические свойства композиционного материала на основе фторангидрита. Определена оптимальная концентрация добавок (3 % активатора и 0,5-1,5 % металлургической пыли), при которой наблюдается рост физико-технических показателей разработанного материала, таких, как механические характеристики, водопоглощение и коэффициент размягчения. Установлено, что комплексное введение добавок способствует не только более полному переходу нерастворимого сульфата кальция в двуводную модификацию, но и уплотнению структуры...
- 1 January 2022
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 14 (5) , 381-391
Carbon-containing modifier for fluoranhydrite binder
- 1 January 2022
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 14 (5) , 381-391
Carbon-containing modifier for fluoranhydrite binder
- 1 January 2022
- Published by Stroymaterialy in Construction Materials
- No. 1-2
Properties of Cement Matrices with Increased Electrical Conductivity
- 1 January 2022
- Published by Stroymaterialy in Construction Materials
- No. 1-2
Properties of Cement Matrices with Increased Electrical Conductivity
- Open Access
- 13 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8509
Influence of Sulphate Attack on Properties of Modified Cement Composites
Monitoring the condition of building structures based on composite materials in aggressive environments shows that the deterioration of basic properties occurs under the influence of various factors such as temperature and humidity changes, in addition to changes in the chemical composition of air environment. In addition, the composite materials during the operation must retain not only the mechanical properties laid down at the design stage, but also the electro-physical characteristics, regardless of the type of destructive effects. In the current study, the quantitative assessment of the result of the interaction of an aggressive sulphate-containing medium with composites modified with conductive and dielectric additives was carried out. The effect of sulphate attack on the specific electrical conductivity of cement composites was studied. The nature of the interaction was evaluated by changing the properties of the samples of the developed compositions under the influence of a single-normal solution of sodium sulphate. The analysis was carried out by means of potentiometric titration using the exchange interaction method by fixing the degree of absorption of sulphate ions and determining the concentration of calcium ions in the solution. The measurement of the solution potential allowed determination of the quantitative indicators of the rate of calcium hydroxide leaching from the sample structure, which is necessary to assess the intensity of the destruction process and determine the nature of the change in strength properties. Measurements of the electrical resistivity of samples under the constant influence of sulphate aggression were taken during 28 days of observation. A method for quantifying the effect of a sulphate medium on a cement matrix was proposed that enables the material durability to be predicted. The features of changes in the morphology of structural components after exposure to aggressive solution were determined by physical and chemical methods.
- 13 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8509
Open AccessInfluence of Sulphate Attack on Properties of Modified Cement Composites
Monitoring the condition of building structures based on composite materials in aggressive environments shows that the deterioration of basic properties occurs under the influence of various factors such as temperature and humidity changes, in addition to changes in the chemical composition of air environment. In addition, the composite materials during the operation must retain not only the mechanical properties laid down at the design stage, but also the electro-physical characteristics, regardless of the type of destructive effects. In the current study, the quantitative assessment of the result of the interaction of an aggressive sulphate-containing medium with composites modified with conductive and dielectric additives was carried out. The effect of sulphate attack on the specific electrical conductivity of cement composites was studied. The nature of the interaction was evaluated by changing the properties of the samples of the developed compositions under the influence of a single-normal solution of sodium sulphate. The analysis was carried out by means of potentiometric titration using the exchange interaction method by fixing the degree of absorption of sulphate ions and determining the concentration of calcium ions in the solution. The measurement of the solution potential allowed determination of the quantitative indicators of the rate of calcium hydroxide leaching from the sample structure, which is necessary to assess the intensity of the destruction process and determine the nature of the change in strength properties. Measurements of the electrical resistivity of samples under the constant influence of sulphate aggression were taken during 28 days of observation. A method for quantifying the effect of a sulphate medium on a cement matrix was proposed that enables the material durability to be predicted. The features of changes in the morphology of structural components after exposure to aggressive solution were determined by physical and chemical methods.
- Open Access
Effect of Ultrafine Additives on the Morphology of Cement Hydration Products
The present research is focused on the investigation of the influence of ultrafine additives on the structure formation of hardened cement paste and the establishment of the mechanisms of the morphological transformations, which determine the properties of hydrated products. In the course of the research, the modification of ordinary Portland cement was performed by the suspension of multi-walled carbon nanotubes (MWCNTs), carbon black (CB) paste, and silica fume (SF). Scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) microanalysis, X-ray diffraction (XRD) analysis, thermal analysis, and Fourier-transform infrared (FTIR) spectroscopy were used to study cement hydration products. The morphology of hardened cement paste depends on the chemical reactivity of additives, their geometry, and their genesis. The action mechanism of the inert carbon-based additives and pozzolanic silica fume were considered. The cement hydration products formed in the process of modification by both types of ultrafine additives are described. In the case of the modification of cement paste by inert MWCNTs and CB paste, the formation of cement hydration products on their surface without strong adhesion was observed, whereas in the case of the addition of SF separately and together with MWCNTs, the strong adhesion of additives and cement hydration products was noted.
Open AccessEffect of Ultrafine Additives on the Morphology of Cement Hydration Products
The present research is focused on the investigation of the influence of ultrafine additives on the structure formation of hardened cement paste and the establishment of the mechanisms of the morphological transformations, which determine the properties of hydrated products. In the course of the research, the modification of ordinary Portland cement was performed by the suspension of multi-walled carbon nanotubes (MWCNTs), carbon black (CB) paste, and silica fume (SF). Scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) microanalysis, X-ray diffraction (XRD) analysis, thermal analysis, and Fourier-transform infrared (FTIR) spectroscopy were used to study cement hydration products. The morphology of hardened cement paste depends on the chemical reactivity of additives, their geometry, and their genesis. The action mechanism of the inert carbon-based additives and pozzolanic silica fume were considered. The cement hydration products formed in the process of modification by both types of ultrafine additives are described. In the case of the modification of cement paste by inert MWCNTs and CB paste, the formation of cement hydration products on their surface without strong adhesion was observed, whereas in the case of the addition of SF separately and together with MWCNTs, the strong adhesion of additives and cement hydration products was noted.
- Open Access
- 1 June 2021
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 16 (6) , 688-697
Multifunctional layered composite material used for construction purposes
Introduction. The adjustability of electrical properties of materials, that have hydraulic setting characteristics, has been studied over the last decades. It is emphasized that any change in electrical properties, triggered by various additives, causes negative side effects, including low corrosive resistance and modified physical and mechanical characteristics. The purpose of this research is to design a multifunctional layered material that features localized electrical conductivity. The objective is to track the influence of modifiers, capable of regulating electrical properties. Materials and methods. Samples were made of Portland cement I 42.5; the cement, having the fineness modulus of 0.7, was used as the aggregate; samples also contained ground Sulphur type 9998 (GOST 127.1-93), soot slurry, and calcium nitrate. The co-authors have identified the unit resistance values of each layer of this composite material, mechanical properties and features of each layer, and the structure of contact layers. Results. The co-authors have determined that the addition of pre-treated Sulphur in the amount of 7 % of the binder mass facilitates the formation of a nonconductive layer, whose unit resistance reaches 29.57 kiloohm cm on the 28th day. The conductive layer, generated by adding soot in the amount of 7 % of the binder mass, ensures the stable passage of electric current. The co-authors have identified that calcium nitrate influences the morphology of secondary crystalline hydrates and the non-crystalline phase of the mineral matrix, made of Portland cement, and it also ensures the required concrete strength. Conclusions. The layered method of formation of new compositions allows to make composite materials having adjustable electrical characteristics. New materials are made of Portland cement, and they contain no non-conductors. The co-authors have proven the efficiency of Sulphur, an integrated modifier made of soot and calcium nitrite, used as the modifiers of the mineral matrix, since they regulate the electrical properties of the artificial stone.
- 1 June 2021
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 16 (6) , 688-697
Open AccessMultifunctional layered composite material used for construction purposes
Introduction. The adjustability of electrical properties of materials, that have hydraulic setting characteristics, has been studied over the last decades. It is emphasized that any change in electrical properties, triggered by various additives, causes negative side effects, including low corrosive resistance and modified physical and mechanical characteristics. The purpose of this research is to design a multifunctional layered material that features localized electrical conductivity. The objective is to track the influence of modifiers, capable of regulating electrical properties. Materials and methods. Samples were made of Portland cement I 42.5; the cement, having the fineness modulus of 0.7, was used as the aggregate; samples also contained ground Sulphur type 9998 (GOST 127.1-93), soot slurry, and calcium nitrate. The co-authors have identified the unit resistance values of each layer of this composite material, mechanical properties and features of each layer, and the structure of contact layers. Results. The co-authors have determined that the addition of pre-treated Sulphur in the amount of 7 % of the binder mass facilitates the formation of a nonconductive layer, whose unit resistance reaches 29.57 kiloohm cm on the 28th day. The conductive layer, generated by adding soot in the amount of 7 % of the binder mass, ensures the stable passage of electric current. The co-authors have identified that calcium nitrate influences the morphology of secondary crystalline hydrates and the non-crystalline phase of the mineral matrix, made of Portland cement, and it also ensures the required concrete strength. Conclusions. The layered method of formation of new compositions allows to make composite materials having adjustable electrical characteristics. New materials are made of Portland cement, and they contain no non-conductors. The co-authors have proven the efficiency of Sulphur, an integrated modifier made of soot and calcium nitrite, used as the modifiers of the mineral matrix, since they regulate the electrical properties of the artificial stone.