Laura Mecozzi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Laura Mecozzi has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Pietro Ferraro
CNR-ISASI, Institute of Applied Sciences and Intelligent Systems ‘E. Caianiello’, Via Campi Flegrei 34, 80078 Pozzuoli, Napoli, Italy
20 shared publications Oriella Gennari
Institute of Applied Sciences and Intelligent Systems, National Research Council (CNR-ISASI), Pozzuoli, Italy
10 shared publicationsRomina Rega
National Research Council (CNR) , Institute of Applied Sciences & Intelligent Systems (ISASI) 'E. Caianiello' , Via Campi Flegrei 34 , 80078 Pozzuoli ( NA ), Italy
8 shared publicationsSimonetta Grilli
Institute of Applied Sciences and Intelligent Systems, National Research Council (CNR-ISASI), Pozzuoli, Italy
7 shared publicationsS. Grilli
5 shared publicationsO. Gennari
Institute of Applied Sciences and Intelligent Systems of the National Research Council (CNR-ISASI), Via Campi Flegrei 34, 80078, Pozzuoli (NA), Italy
4 shared publications
Latest Publications
- Open Access
- 30 January 2026
- Published by IOP Publishing in Progress in Biomedical Engineering
- Vol. 8 (1) , 012012
State of the art in soft eversion robots for colonoscopy: a review
This review explores the current state of eversion robotics in the context of colonoscopy, given the need for less invasive, more patient-friendly screening technologies. Conventional colonoscopy often leads to discomfort and patient reluctance, contributing to delayed diagnoses and high colorectal cancer mortality rates. Eversion robots, also known as vine robots or soft growing robots are soft, pressure-driven devices that extend by everting from the tip whilst offering a promising option by enabling frictionless advancement and potentially pain-free procedures. We examine the key challenges and opportunities in adapting eversion robots for clinical endoscopic use, focusing on material selection, actuation, steering, and payload delivery. From the literature, thermoplastic polyurethane emerges as the most viable material for the robot’s sleeve due to its airtightness, biocompatibility, suitability for heat or ultrasonic welding, and availability in highly flexible thin layers. Tip-steering mechanisms are identified as the most effective strategies for navigation, allowing high flexibility without increasing the wall thickness of the robot, as required in alternative approaches using distributed actuation mechanisms. The review also evaluates strategies for integrating functional tools at the tip of the robot, concluding that cap-free designs provide superior adaptability to the varying colon diameter, preserve compressibility, and keep tip friction to a minimum, unlike cap-based payload delivery methods. By consolidating current research and identifying pathways for innovation, this review supports the development of eversion soft robots as a next-generation solution for minimally invasive colorectal diagnostics and therapy.
- 30 January 2026
- Published by IOP Publishing in Progress in Biomedical Engineering
- Vol. 8 (1) , 012012
Open AccessState of the art in soft eversion robots for colonoscopy: a review
This review explores the current state of eversion robotics in the context of colonoscopy, given the need for less invasive, more patient-friendly screening technologies. Conventional colonoscopy often leads to discomfort and patient reluctance, contributing to delayed diagnoses and high colorectal cancer mortality rates. Eversion robots, also known as vine robots or soft growing robots are soft, pressure-driven devices that extend by everting from the tip whilst offering a promising option by enabling frictionless advancement and potentially pain-free procedures. We examine the key challenges and opportunities in adapting eversion robots for clinical endoscopic use, focusing on material selection, actuation, steering, and payload delivery. From the literature, thermoplastic polyurethane emerges as the most viable material for the robot’s sleeve due to its airtightness, biocompatibility, suitability for heat or ultrasonic welding, and availability in highly flexible thin layers. Tip-steering mechanisms are identified as the most effective strategies for navigation, allowing high flexibility without increasing the wall thickness of the robot, as required in alternative approaches using distributed actuation mechanisms. The review also evaluates strategies for integrating functional tools at the tip of the robot, concluding that cap-free designs provide superior adaptability to the varying colon diameter, preserve compressibility, and keep tip friction to a minimum, unlike cap-based payload delivery methods. By consolidating current research and identifying pathways for innovation, this review supports the development of eversion soft robots as a next-generation solution for minimally invasive colorectal diagnostics and therapy.
- Open Access
- 1 February 2023
- Published by American Physiological Society in American Journal of Physiology-Lung Cellular and Molecular Physiology
- Vol. 324 (2) , L211-L227
Indocyanine-enhanced mouse model of bleomycin-induced lung fibrosis with hallmarks of progressive emphysema
The development of new drugs for idiopathic pulmonary fibrosis strongly relies on preclinical experimentation, which requires the continuous improvement of animal models and integration with in vivo imaging data. Here, we investigated the lung distribution of bleomycin (BLM) associated with the indocyanine green (ICG) dye by fluorescence imaging. A long-lasting lung retention (up to 21 days) was observed upon oropharyngeal aspiration (OA) of either ICG or BLM + ICG, with significantly more severe pulmonary fibrosis, accompanied by the progressive appearance of emphysema-like features, uniquely associated with the latter combination. More severe and persistent lung fibrosis, together with a progressive air space enlargement uniquely associated with the BLM + ICG group, was confirmed by longitudinal micro-computed tomography (CT) and histological analyses. Multiple inflammation and fibrosis biomarkers were found to be increased in the bronchoalveolar lavage fluid of BLM- and BLM + ICG-treated animals, but with a clear trend toward a much stronger increase in the latter group. Similarly, in vitro assays performed on macrophage and epithelial cell lines revealed a significantly more marked cytotoxicity in the case of BLM + ICG-treated mice. Also unique to this group was the synergistic upregulation of apoptotic markers both in lung sections and cell lines. Although the exact mechanism underlying the more intense lung fibrosis phenotype with emphysema-like features induced by BLM + ICG remains to be elucidated, we believe that this combination treatment, whose overall effects more closely resemble the human disease, represents a valuable alternative model for studying fibrosis development and for the identification of new antifibrotic compounds.
- 1 February 2023
- Published by American Physiological Society in American Journal of Physiology-Lung Cellular and Molecular Physiology
- Vol. 324 (2) , L211-L227
Open AccessIndocyanine-enhanced mouse model of bleomycin-induced lung fibrosis with hallmarks of progressive emphysema
The development of new drugs for idiopathic pulmonary fibrosis strongly relies on preclinical experimentation, which requires the continuous improvement of animal models and integration with in vivo imaging data. Here, we investigated the lung distribution of bleomycin (BLM) associated with the indocyanine green (ICG) dye by fluorescence imaging. A long-lasting lung retention (up to 21 days) was observed upon oropharyngeal aspiration (OA) of either ICG or BLM + ICG, with significantly more severe pulmonary fibrosis, accompanied by the progressive appearance of emphysema-like features, uniquely associated with the latter combination. More severe and persistent lung fibrosis, together with a progressive air space enlargement uniquely associated with the BLM + ICG group, was confirmed by longitudinal micro-computed tomography (CT) and histological analyses. Multiple inflammation and fibrosis biomarkers were found to be increased in the bronchoalveolar lavage fluid of BLM- and BLM + ICG-treated animals, but with a clear trend toward a much stronger increase in the latter group. Similarly, in vitro assays performed on macrophage and epithelial cell lines revealed a significantly more marked cytotoxicity in the case of BLM + ICG-treated mice. Also unique to this group was the synergistic upregulation of apoptotic markers both in lung sections and cell lines. Although the exact mechanism underlying the more intense lung fibrosis phenotype with emphysema-like features induced by BLM + ICG remains to be elucidated, we believe that this combination treatment, whose overall effects more closely resemble the human disease, represents a valuable alternative model for studying fibrosis development and for the identification of new antifibrotic compounds.
- Open Access
- 19 June 2019
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 7, 429
Pyro-Electrification of Freestanding Polymer Sheets: A New Tool for Cation-Free Manipulation of Cell Adhesion in vitro
Localized electric fields have become, in recent years, a source of inspiration to researchers and laboratories thanks to a huge amount of applications derived from it, including positioning of microparticles as building blocks for electrical, optical, and magnetic devices. The possibility of producing polymeric materials with surface charge thus opens new perspectives for applications where process simplicity and cost-effectiveness of flexible electronics are of fundamental importance. In particular, the influence of surface charges is widely studied and is a critical issue especially when new materials and functional technologies are introduced. Here, we report a voltage-free pyro-electrification (PE) process able to induce a permanent dipole orientation into polymer sheets under both mono- and bipolar distribution. The technique makes use of the pyroelectric effect for generating electric potentials on the order of kilovolts by an easy-to-accomplish thermal treatment of ferroelectric lithium niobate (LN) crystals. The PE allows us to avoid the expensive and time-consuming fabrication of high-power electrical circuits, as occurs in traditional generator-based techniques. Since the technique is fully compatible with spin-coating-based procedures, the pyro-electrified polymer sheets are easily peeled off the surface of the LN crystal after PE completion, thus providing highly stable and freestanding charged sheets. We show the reliability of the technique for different polymers and for different applications ranging from live cell patterning to biofilm formation tests for bacteria linked to food-processing environments.
- 19 June 2019
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 7, 429
Open AccessPyro-Electrification of Freestanding Polymer Sheets: A New Tool for Cation-Free Manipulation of Cell Adhesion in vitro
Localized electric fields have become, in recent years, a source of inspiration to researchers and laboratories thanks to a huge amount of applications derived from it, including positioning of microparticles as building blocks for electrical, optical, and magnetic devices. The possibility of producing polymeric materials with surface charge thus opens new perspectives for applications where process simplicity and cost-effectiveness of flexible electronics are of fundamental importance. In particular, the influence of surface charges is widely studied and is a critical issue especially when new materials and functional technologies are introduced. Here, we report a voltage-free pyro-electrification (PE) process able to induce a permanent dipole orientation into polymer sheets under both mono- and bipolar distribution. The technique makes use of the pyroelectric effect for generating electric potentials on the order of kilovolts by an easy-to-accomplish thermal treatment of ferroelectric lithium niobate (LN) crystals. The PE allows us to avoid the expensive and time-consuming fabrication of high-power electrical circuits, as occurs in traditional generator-based techniques. Since the technique is fully compatible with spin-coating-based procedures, the pyro-electrified polymer sheets are easily peeled off the surface of the LN crystal after PE completion, thus providing highly stable and freestanding charged sheets. We show the reliability of the technique for different polymers and for different applications ranging from live cell patterning to biofilm formation tests for bacteria linked to food-processing environments.
- Open Access
- 3 May 2019
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 5 (5) , eaat5189
Quick liquid packaging: Encasing water silhouettes by three-dimensional polymer membranes
Quick liquid wrapping of water silhouettes creates 3D polymeric membranes in a single step.
- 3 May 2019
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 5 (5) , eaat5189
Open AccessQuick liquid packaging: Encasing water silhouettes by three-dimensional polymer membranes
Quick liquid wrapping of water silhouettes creates 3D polymeric membranes in a single step.
- Open Access
- 23 January 2019
- Published by Springer Nature in NPG Asia Materials
- Vol. 11 (1) , 1
A skin-over-liquid platform with compliant microbumps actuated by pyro-EHD pressure
The unique deformability and the compliance ability of thin sheets on soft substrates attract much interest for studying the phenomena related to elastic instabilities as well as for sensing very weak forces such as those generated by live cells in vitro. However, the techniques used currently for producing such platforms are affected by a high degree of complexity and poor repeatability. Moreover, their deformability is usually used as a passive response to the action of an external force. Herein we propose a novel concept for a reliable and dynamic skin-over-liquid system made of a periodic array of highly compliant microbumps actuated through electrode-free electrohydrodynamic (EHD) pressure. We demonstrate that these structures are highly repeatable and capable of swelling and deflating easily under a simple thermal stimulation driven by the pyroelectric effect, thus providing a challenging platform that can be actively controlled at the microscale. Furthermore, we show the proof of principle by swelling these microbumps for mechanically stimulating live cells in vitro, thus opening the route to more reliable and easy to accomplish assays in the field of mechanobiology.
- 23 January 2019
- Published by Springer Nature in NPG Asia Materials
- Vol. 11 (1) , 1
Open AccessA skin-over-liquid platform with compliant microbumps actuated by pyro-EHD pressure
The unique deformability and the compliance ability of thin sheets on soft substrates attract much interest for studying the phenomena related to elastic instabilities as well as for sensing very weak forces such as those generated by live cells in vitro. However, the techniques used currently for producing such platforms are affected by a high degree of complexity and poor repeatability. Moreover, their deformability is usually used as a passive response to the action of an external force. Herein we propose a novel concept for a reliable and dynamic skin-over-liquid system made of a periodic array of highly compliant microbumps actuated through electrode-free electrohydrodynamic (EHD) pressure. We demonstrate that these structures are highly repeatable and capable of swelling and deflating easily under a simple thermal stimulation driven by the pyroelectric effect, thus providing a challenging platform that can be actively controlled at the microscale. Furthermore, we show the proof of principle by swelling these microbumps for mechanically stimulating live cells in vitro, thus opening the route to more reliable and easy to accomplish assays in the field of mechanobiology.
- 4 January 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (3) , 3382-3387
Maskless Arrayed Nanofiber Mats by Bipolar Pyroelectrospinning
The numerous advantages of micro- and nanostructures produced by electrospinning (ES) have stimulated enormous interest in this technology with potential application in several fields. However, ES still has some limitations in controlling the geometrical arrangement of the fiber mats so that expensive and time-consuming technologies are usually employed for producing ordered geometries. Here we present a technique that we call “bipolar pyroelectrospinning” (b-PES) for generating ordered arrays of fiber mats in a direct manner by using the bipolar pyroelectric field produced by a periodically poled lithium niobate crystal (PPLN). The b-PES is free from expensive electrodes, nozzles, and masks because it makes use simply of the structured pyroelectric field produced by the PPLN crystal used as collector. The results show clearly the reliability of the technique in producing a wide variety of arrayed fiber mats that could find application in bioengineering or many other fields. Preliminary results of live cells patterning under controlled geometrical constraints is also reported and discussed in order to show potential exploitation as a scaffold in tissue engineering.
- 4 January 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (3) , 3382-3387
Maskless Arrayed Nanofiber Mats by Bipolar Pyroelectrospinning
The numerous advantages of micro- and nanostructures produced by electrospinning (ES) have stimulated enormous interest in this technology with potential application in several fields. However, ES still has some limitations in controlling the geometrical arrangement of the fiber mats so that expensive and time-consuming technologies are usually employed for producing ordered geometries. Here we present a technique that we call “bipolar pyroelectrospinning” (b-PES) for generating ordered arrays of fiber mats in a direct manner by using the bipolar pyroelectric field produced by a periodically poled lithium niobate crystal (PPLN). The b-PES is free from expensive electrodes, nozzles, and masks because it makes use simply of the structured pyroelectric field produced by the PPLN crystal used as collector. The results show clearly the reliability of the technique in producing a wide variety of arrayed fiber mats that could find application in bioengineering or many other fields. Preliminary results of live cells patterning under controlled geometrical constraints is also reported and discussed in order to show potential exploitation as a scaffold in tissue engineering.
- 1 May 2018
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 104, 48-52
Twice electric field poling for engineering multiperiodic Hex-PPLN microstructures
- 1 May 2018
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 104, 48-52
Twice electric field poling for engineering multiperiodic Hex-PPLN microstructures
- 20 April 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (18) , 15467-15476
Pyroelectric Effect Enables Simple and Rapid Evaluation of Biofilm Formation
Biofilms are detrimental to human life and industrial processes due to potential infections, contaminations and deterioration. Therefore, the evaluation of microbial capability to form biofilms is of fundamental importance for assessing how different environmental factors may affect their vitality. Nowadays, the approaches used for biofilm evaluation are still poor in reliability and rapidity and often provide contradictory results. Here we present what we call Biofilm Electrostatic Test (BET) as a simple, rapid and high reproducible tool for evaluating in vitro the ability of bacteria to form biofilms through the electrostatic interaction with a pyro-electrified carrier. The results show how the BET is able to produce viable biofilms with a density 6-fold higher than the control, just after 2 h incubation. The BET could pave the way to a rapid standardization of the evaluation of bacterial resistance among biofilm-producing microorganisms. In fact, due to its simplicity and cost-effectiveness, it is well suited for a rapid and easy implementation into a microbiology laboratory.
- 20 April 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (18) , 15467-15476
Pyroelectric Effect Enables Simple and Rapid Evaluation of Biofilm Formation
Biofilms are detrimental to human life and industrial processes due to potential infections, contaminations and deterioration. Therefore, the evaluation of microbial capability to form biofilms is of fundamental importance for assessing how different environmental factors may affect their vitality. Nowadays, the approaches used for biofilm evaluation are still poor in reliability and rapidity and often provide contradictory results. Here we present what we call Biofilm Electrostatic Test (BET) as a simple, rapid and high reproducible tool for evaluating in vitro the ability of bacteria to form biofilms through the electrostatic interaction with a pyro-electrified carrier. The results show how the BET is able to produce viable biofilms with a density 6-fold higher than the control, just after 2 h incubation. The BET could pave the way to a rapid standardization of the evaluation of bacterial resistance among biofilm-producing microorganisms. In fact, due to its simplicity and cost-effectiveness, it is well suited for a rapid and easy implementation into a microbiology laboratory.
- 4 January 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (2) , 2122-2129
Easy Printing of High Viscous Microdots by Spontaneous Breakup of Thin Fibers
Electro-hydrodynamic jetting is emerging as a successful technique for printing inks with resolutions well beyond those offered by conventional inkjet printers. However, the variety of printable inks is still limited to those with relatively low viscosities (typically < 20 mPa s) due to nozzle clogging problems. Here we show the possibility of printing ordered microdots of high viscous inks such as the poly(lactic-co-glycolic acid) (PLGA) by exploiting the spontaneous breakup of a thin fibre generated through nozzle-free pyro-electrospinning (PES). The PLGA fibre is deposited onto a partially wetting surface and the breakup is achieved simply by applying an appropriate thermal stimulation, able to induce polymer melting and hence a mechanism of surface area minimization due to the Plateau-Rayleigh instability. The results show that the technique is a good candidate for extending the printability at microscale to high viscous inks, thus extending their applicability to additional applications, such as cell behaviour under controlled morphological constraints.
- 4 January 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (2) , 2122-2129
Easy Printing of High Viscous Microdots by Spontaneous Breakup of Thin Fibers
Electro-hydrodynamic jetting is emerging as a successful technique for printing inks with resolutions well beyond those offered by conventional inkjet printers. However, the variety of printable inks is still limited to those with relatively low viscosities (typically < 20 mPa s) due to nozzle clogging problems. Here we show the possibility of printing ordered microdots of high viscous inks such as the poly(lactic-co-glycolic acid) (PLGA) by exploiting the spontaneous breakup of a thin fibre generated through nozzle-free pyro-electrospinning (PES). The PLGA fibre is deposited onto a partially wetting surface and the breakup is achieved simply by applying an appropriate thermal stimulation, able to induce polymer melting and hence a mechanism of surface area minimization due to the Plateau-Rayleigh instability. The results show that the technique is a good candidate for extending the printability at microscale to high viscous inks, thus extending their applicability to additional applications, such as cell behaviour under controlled morphological constraints.