SRStanisław Rabiej

Stanisław Rabiej

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Stanisław Rabiej has a total of 65 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The role of an objective function in the mathematical modelling of wide-angle X-ray diffraction curves of semi-crystalline polymers

    by Małgorzata Rabiej, Stanisław Rabiej

    To decompose a wide-angle X-ray diffraction (WAXD) curve of a semi-crystalline polymer into crystalline peaks and amorphous halos, a theoretical best-fitted curve, i.e. a mathematical model, is constructed. In fitting the theoretical curve to the experimental one, various functions can be used to quantify and minimize the deviations between the curves. The analyses and calculations performed in this work have proved that the quality of the model, its parameters and consequently the information on the structure of the investigated polymer are considerably dependent on the shape of an objective function. It is shown that the best models are obtained employing the least-squares method in which the sum of squared absolute errors is minimized. On the other hand, the methods in which the objective functions are based on the relative errors do not give a good fit and should not be used. The comparison and evaluation were performed using WAXD curves of seven polymers: isotactic polypropylene, polyvinylidene fluoride, cellulose I, cellulose II, polyethylene, polyethylene terephthalate and polyamide 6. The methods were compared and evaluated using statistical tests and measures of the quality of fitting.


  • Open Access

    A comparison of the structure of lamellar stacks in a semicrystalline polymer during melting and crystallization by means of the Intensity Superposition Method

    by Stanislaw Rabiej, Malgorzata Rabiej

    This work presents the results of Small Angle X-ray Scattering (SAXS) investigations of the structure of lamellar stacks in ethylene-1-octene copolymer during heating and cooling. The SAXS curves were analysed using the Intensity Superposition Method (ISM). By means of this method, not only the average values of the parameters of lamellar stacks but also the stacks crystallinity distribution function were determined. Based on this function, the structure of lamellar stacks during crystallization and melting of the copolymer was compared and observed differences were indicated.


  • Fabrication of a new PVDF/SbSI nanowire composite for smart wearable textile

    by Marcin Jesionek, Bartłomiej Toroń, Piotr Szperlich, Włodzimierz Biniaś, Dorota Biniaś, Stanisław Rabiej, Anna Starczewska, Marian Nowak, Mirosława Kępińska, Jan Dec


  • Functionalized siloxane‐silsesquioxane resins and polypropylene‐based composites: Morphological, structural, thermal, and mechanical properties

    by Arkadiusz Niemczyk, Krystyna Czaja, Katarzyna Dziubek, Mariusz Szołyga, Stanisław Rabiej, Roman Szatanik

    Non‐functionalized and n‐alkyl‐functionalized siloxane‐silsesquioxane resins (S4SQ) were synthesized and characterized to confirm their structure and properties. Polypropylene (PP) composites with S4SQ resins as fillers were prepared by the melt blending. The influence of the kinds and amounts of fillers on the structural, morphological and thermal properties as well as mechanical characteristics and processability was determined. High compatibility of composites with functionalized resins resulted in more homogenous dispersion of filler particles in comparison with the composites which contained a non‐functionalized resin. Moreover, the introduction of S4SQ resins into PP strongly affected the crystalline structure of the polymer matrix and the free‐volume properties of composites. Siloxane‐silsesquioxane resins changed the contributions of the α‐ and β‐crystalline phases and they increased the crystal sizes of PP. The PP/S4SQ composites were also characterized by the improved crystallization temperature and crystallinity degree while the melting temperature and processability were changed only slightly. The mechanical properties of the PP/S4SQ materials were found to be dependent mostly on the degree of filler dispersion and crystalline structure of the composite materials. POLYM. COMPOS., 40:3101–3114, 2019. © 2018 Society of Plastics Engineers


  • Study and evaluation of dispersion of polyhedral oligomeric silsesquioxane and silica filler in polypropylene composites

    by Arkadiusz Niemczyk, Katarzyna Dziubek, Krystyna Czaja, Daniel Frączek, Ryszard Piasecki, Stanisław Rabiej, Michał Dutkiewicz

    Various methods were used for evaluation of homogeneity of polypropylene (PP) matrix composites with octakis([n‐octyl]dimethylsiloxy)octasilsesquioxane, octakis([n‐octadecyl]dimethylsiloxy)octasilsesquioxane, and silica (SiO2) fillers. The filler dispersion was determined on the basis of the results from the wide‐angle X‐ray scattering (WAXS) analysis, from the tests of selected mechanical properties, from scanning electron microscopy (SEM) with energy dispersive X‐ray spectroscopy and from the decomposable entropic descriptor method. The use of different methods allowed to evaluate homogeneity of PP composites on various levels and with different precisions. The dispersion degree was found to be mostly depended on the kind and amount of the filler used. The presence of long n‐alkyl chain substituents in POSS molecules greatly improved the level of filler dispersion in the polymer matrix in comparison to silica which was visually assessed by SEM. The WAXS method revealed the formation of filler aggregates in the PP matrix which influenced the structural characteristic of PP composites and changed the mechanical properties of those materials. However, the decomposable entropic descriptor method provided the possibility of quantitative and the most objective estimation of homogeneity of the obtained composite materials. POLYM. COMPOS., 40:1354–1364, 2019. © 2018 Society of Plastics Engineers


  • Study of polyethylene nanocomposites with polyhedral oligomeric silsesquioxane nanofillers—from structural characteristics to mechanical properties and processability

    by Arkadiusz Niemczyk, Katarzyna Adamczyk‐Tomiak, Katarzyna Dziubek, Krystyna Czaja, Stanisław Rabiej, Roman Szatanik, Michał Dutkiewicz

    High‐density polyethylene (HDPE) and low‐density polyethylene (LDPE) nanocomposites filled with octakis({alkyl}dimethylsiloxy)octasilsesquioxanes (POSS) were prepared by the melt blending method. The effects of the structure and the content of POSS nanofillers on free‐volume properties and structural characteristics of nanocomposites were investigated by the positron annihilation lifetime spectroscopy (PALS) and X‐ray diffraction methods: wide‐angle X‐ray scattering (WAXS) and small‐angle X‐ray scattering (SAXS). Incorporation of POSS nanofillers into polyethylene matrices modified the arrangement of the polymer chains and affected the size and number of free‐volume holes in nanocomposites. The presence of POSS molecules influenced also the crystallinity of nanocomposites because of the increased volume occupied by spherulites in polymers. The extent of changes in the structural characteristics of the POSS‐containing nanocomposites was found dependent on the type of the polymeric matrix as well as on the structure and content of the POSS nanofillers used. Incorporation of the POSS nanofiller into the polyethylene matrix increased the mass flow rate values significantly, thus the POSS could be considered as a plasticizer. Moreover, the compositions of nanocomposites strongly affected their mechanical properties which were mostly dependent on the compatibility between the polymer and the nanofiller, and on the ability of the POSS to aggregate. POLYM. COMPOS., 40:E350–E364, 2019. © 2017 Society of Plastics Engineers


  • Ethylene/POSS copolymerization behavior of postmetallocene catalysts and copolymer characteristics

    by Paweł Groch, Katarzyna Dziubek, Krystyna Czaja, Marzena Białek, Katarzyna Adamczyk‐Tomiak, Stanisław Rabiej, Beata Dudziec

    Copolymerization of ethylene with iso‐butyl substituted monoalkenyl(siloxy)‐ or monoalkenylsilsesquioxane (POSS) comonomers over bis(phenoxy‐imine) and salen‐type titanium and zirconium catalysts was studied. It was found that the polyreaction performance was significantly depended by the kind of the catalyst and by the structure and concentration of POSS in the feed. The POSS comonomer was efficiently incorporated into the polymer chain at up to 0.2 mol %. The differences in the copolymer compositions as the functions of the catalyst kind and the POSS comonomer were observed, including the varied number‐average sequence length of ethylene and unsaturated end groups, as determined by 1H NMR and FT‐IR. The presence of POSS comonomers affected also the melting and crystallization behavior of the copolymers, as evidenced by DSC, because of influence on the polymer chain arrangement. The POSS units could act as the nucleating agents. Moreover, the crystal and structural parameters of ethylene/POSS copolymers were evaluated on the basis of X‐ray results, and the limited self‐aggregation of POSS incorporated into the polymer chain, the small number and size of POSS aggregates, and the increased crystallinity degree of copolymers were demonstrated. The ethylene/POSS copolymers produced by postmetallocenes offered also high thermal stability and interesting morphological properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 3918–3934


  • Nanocomposite Precursor Polyacrylonitrile Fibers for Medical Applications

    by Grzegorz Szparaga, Paulina Król, Magdalena Brzezińska, Stanisław Rabiej, Maciej Boguń

    The significant development of the fibers' manufacturing processes favors the emergence of new solutions in the preparation of the bioactive implantable materials. Thus, the properly designed manufacturing processes, as well as properly controlled process parameters enable controlling properties of the final composite material. This paper presents the investigation of the effect of the initial manufacturing parameters on the structure and properties of the precursor polyacrylonitrile fibers containing two types of bioglass. By using a bioactive silicate modifier during the fibers spinning process, carbon biomaterials with modified properties can be obtained. Therefore, the incorporation of modifiers containing calcium (Ca) and phosphorus (P) into the carbon fibers matrix could contribute to the increase of its compatibility with the surrounding bone tissue. The significant part of the investigation concerned the application of the drawing distribution during the fibers spinning process. It is already known that the proper value of the total draw parameter allows obtaining fibers that are characterized by optimal specific strength values. The resulting fibers have strength of 34–46 cN/tex and elongation at break of 9–14%; which supports its processing into nonwovens for further carbonization processes. Furthermore, the porous and macroscopic structure in relation to the sorption properties of the obtained fibers has been investigated.


  • The structure and properties of the carbon non-wovens modified with bioactive nanoceramics for medical applications

    by A. Fraczek-Szczypta, S. Rabiej, G. Szparaga, E. Pabjanczyk-Wlazlo, P. Krol, M. Brzezinska, S. Blazewicz, M. Bogun