Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Elżbieta Szafranko has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental and Field Assessment of Mineral–Cement–Emulsion Mixtures Containing Recycled Components

    by Elżbieta Szafranko, Magdalena Czyż, Maciej Lis

    This study investigates the performance of mineral–cement–emulsion (MCE) mixtures produced with reclaimed asphalt pavement (RAP) and recycled mineral aggregates for use in road base layers. The aim was to evaluate the mechanical properties, field performance, and key factors influencing the cracking behavior of these sustainable cold-recycled mixtures. Approximately 160 laboratory tests were performed to determine indirect tensile strength (ITS), stiffness modulus (IT-CY), bulk density, and air-void content. The MCE mixture achieved an average ITS of 1.09 MPa and stiffness modulus of 5873 MPa after 28 days of curing, confirming compliance with design requirements. The field investigation of a test section showed good structural integrity and compaction, although several transverse cracks developed during the first year of service. The mechanistic interpretation attributed these cracks to combined cement hydration shrinkage and thermal contraction effects. The results indicate that MCE mixtures made with recycled materials can meet technical specifications while reducing environmental impact, provided that binder proportions and curing conditions are carefully optimized.


  • Kontrola jakości drogowego podłoża konstrukcyjnegoz wykorzystaniem narzędzi BIM.Część II. Etapy badań, podsumowanie prac badawczych

    by Elżbieta Szafranko, Magdalena Czyż, Maciej Lis

    Wśród kluczowych etapów realizacji inwestycjidrogowych szczególnie istotnym, a zarazem wymagającym,jest proces wykonywania podłoża pod konstrukcję drogową.Proces ten jest jednak obarczony wieloma czynnikami niepewności,a dodatkowo tradycyjne metody weryfikacji jakościpodłoża często charakteryzują się ograniczoną efektywnością.Dlatego opracowanie koncepcyjnego modelu integracji procesuweryfikacji jakości podłoża konstrukcji drogowej w środowiskuBIM wydaje się metodą pozwalającą na ominięcie wieluproblemów. Głównym celem niniejszego artykułu jest opracowaniekoncepcyjnego modelu integracji procesu weryfikacjijakości podłoża konstrukcji drogowej w środowisku BIM. Przeprowadzonebadania potwierdzają przydatność proponowanejmetodyki, która pozwala na bieżącą kontrolę parametrówtechnicznych podłoża w czasie rzeczywistym, zwiększając efektywnośćprocesu budowy.

  • Kontrola jakości drogowego podłoża konstrukcyjnegoz wykorzystaniem narzędzi BIM. Część I. Wprowadzeniei schemat metodyki badań

    by Elżbieta Szafranko, Magdalena Czyż, Maciej Lis

    Wśród kluczowych etapów realizacji inwestycji drogowychszczególnie istotnym, a zarazem wymagającym, jest proceswykonywania podłoża pod konstrukcję drogową. Proces tenjest jednak obarczony wieloma czynnikami niepewności, a dodatkowotradycyjne metody weryfikacji jakości podłoża często charakteryzująsię ograniczoną efektywnością. Dlatego opracowaniekoncepcyjnego modelu integracji procesu weryfikacji jakości podłożakonstrukcji drogowej w środowisku BIM wydaje się metodąpozwalającą na ominięcie wielu problemów. Głównym celem niniejszegoartykułu jest opracowanie koncepcyjnego modelu integracjiprocesu weryfikacji jakości podłoża konstrukcji drogowejw środowisku BIM. Przeprowadzone badania potwierdzająprzydatność proponowanej metodyki, która pozwala na bieżącąkontrolę parametrów technicznych podłoża w czasie rzeczywistym,zwiększając efektywność procesu budowy

  • BUILDING DESIGN ACCORDING TO THE GREEN BUILDING PRINCIPLES

    by Marlena Jurczak, Jolanta Harasymiuk, Elzbieta Szafranko

    An ecological approach to construction and the Green Building concept force construction processes participants to meet specific requirements. In relation to designers and making designs of buildings, the requirements to be taken into account have also been defined. Above all, social, financial, and environmental benefits throughout the entire lifecycle of a building must be taken into consideration. It is significant to choose materials that ensure the safety and durability of the structure, as well as its thermal insulation up to the required level, and to use construction materials and products made from recycled raw materials. Green building is primarily about the efficient use of energy and resources, and automated construction technology, which should improve the comfort and functionality of buildings. When designing, the aim is to minimise interference with the natural landscape by fitting new buildings into the existing landforms and among adjacent buildings. An ecological building has an impact on both nearer and more distant surroundings, hence the right location is vital. Designing in accordance with the Green Building principles entails acknowledging the needs of society, such as ensuring accessibility for people with disabilities, creating social space and improving the quality of life of residents. The principles of sustainable development apply to both newly designed facilities and those undergoing thermal modernization. This article presents an example of a design made according to Green Building principles.


  • TOOLS FOR ENVIRONMENTAL PLANNING IN POLAND - HOW EFFECTIVE THEY ARE AND COULD BECOME

    by Jolanta Harasymiuk, Elzbieta Szafranko, Marlena Jurczak

    The study attempts to examine the current and potential effectiveness of selected tools used in environmental planning of construction projects in Poland. Environmental planning is a complicated and demanding process, and as such it should be supported by the use of environmental management applications. At the early investment planning stage, it is necessary to verify whether a construction project to be developed, in addition to a building permit, does not require a decision on environmental conditions. This decision precedes the issuance of building permits for projects implemented as undertakings with a significant impact on the environment. It should provide the authorities responsible for the procedures and the public with the information on what environmental effects the construction project may have on a local scale. The environmental impact assessments (EIA) database is an IT system used to collect, process and share information on EIA proceedings on a national scale. One of the key functionalities of this system should be to streamline the work of bodies participating in EIAs and to accelerate investment processes. The study focuses on a multidimensional analysis of the effectiveness of environmental management tools from the point of view of main stakeholders in construction projects, and proposes appropriate improvements.

  • CIRCULAR ECONOMY IN CONSTRUCTION AS AN ELEMENT OF THE GREEN BUILDING PHILOSOPHY

    by Elzbieta Szafranko, Jolanta Harasymiuk, Marlena Jurczak

    Construction is a branch of the economy that occupies a leading place in waste production. The problem is both the demolition of buildings ending their activity and the construction process itself. During the demolition process, waste is segregated, and most often concrete and brick rubble is recycled. In addition, wooden and wood-based elements, metal and glass are most often recycled. However, there is still a large amount of mixed waste, which often contains hazardous waste. It is necessary to store them safely. Another problem is waste generated during construction. The largest percentage of their mass is packaging. In construction practice, they are most often transported to companies that deal with their segregation and partial processing as mixed waste. However, in the idea of a closed-loop economy, in addition to waste processing, it is about reducing the negative impact on the environment associated with, among others, the transport of this waste. The article proposes the possibility of using some packaging waste directly on the construction site. A scheme of processes allowing waste processing on the construction site and using them to produce elements used on site is presented. This approach allows for the implementation of the Green Building philosophy in a more comprehensive form.


  • Analysis of a data set in a multi-criteria assessment of variants of a building development

    by Marlena Anna Jurczak, Jolanta Harasymiuk, Elżbieta Szafranko

    One of the most important things to do at the stage of preparing an investment process in the construction business is to develop a few possible solutions and then to choose the variant which best fulfils the expectations of various groups of stakeholders. Making a decision about which variant to select depends on how it satisfies a number of criteria, which in turn reflect the requirements set for the planned investment. The process analysing variant solutions employs multi-criteria analysis methods. In order to make analyses and to identify the importance of measurable and non-measurable criteria, surveys and interviews are carried out to acquire the information on the role of the previously defined criteria. Opinions given by experts tend to be divergent due to differences in education, professional background as well as various professional and private experiences. This article reviews data processing methods, and discusses an example of a procedure, which is part of a more extensive analysis of the route of a planned road. The case presented in this paper focuses on the evaluation of five criteria from the category ‘impact on the natural environment’, which are significant in such development projects. The calculations involved in this assessment proved to be time- and labour-consuming, while raising a number of doubts concerning the stage of data aggregation. Hence, the objective of this study has been to develop a method that will enable more efficient data processing while taking into account all assessments.

  • Open Access

    Analysis of Tendencies, Change and Strength of Barriers Limiting the Development of BIM: A Novelty Assessment Method

    by Elżbieta Szafranko, Magdalena Czyż

    BIM technology is a design approach recommended by EU directives that started to gain momentum in the years 2012–2014. This technology enables the user to create building plans and designs more quickly while avoiding many errors. In addition, by entering certain data into BIM models, it is easier to complete consecutive steps connected to the construction, use and demolition of buildings. It has also been noticed that BIM is not as popular in practice as it might appear, despite the many unquestionable benefits arising from its application. This article presents the results of a study of barriers that have constrained the development of BIM technology in recent years all over the world. The strength of factors defined on the basis of the literature was assessed. The analyses were carried out using the author’s own evaluation method, which allowed the power of the most important barriers to be assessed. This study shows that financial barriers, mentioned by many authors as the most important factor, still remain a serious problem, and their strength is the highest among the analyzed barriers. Barriers associated with the shortage of knowledge and specialists also feature prominently in assessments, and their importance continues to display a tendency to increase.

  • Open Access

    Implementability of BIM Technology in Light of Literature Studies and Analyses of the Construction Market

    by Elżbieta Szafranko, Marlena Jurczak

    In 2014, the European Union Directive 2014/24/EU was issued, which has provisions including information about the use of electronic technology for modelling buildings, referred to as BIM. According to various sources in the literature, with the help of BIM technology building designs can be prepared more quickly, while avoiding errors; it is also possible to generate and control any amendments in a building blueprint, promptly estimate costs of the building works planned, and implement a variety of activities connected with the maintenance of a new building once it is erected. In some EU states, initiatives have been launched leading to the introduction of BIM technology in public procurement, and the technology itself is now gaining popularity. However, the adaptation of this new technology is not always met with enthusiasm, and its implementation is hindered by many obstacles. The aim of this article is to conduct a broader analysis of the possibilities of BIM development in the construction industry based on data obtained from companies operating in the construction industry. The research used analysis of source materials, surveys, and targeted interviews. The study has demonstrated several barriers, of which the most important ones proved to be of financial nature, formal and legal considerations, and mentality, namely the unwillingness to learn, adopt novel solutions, and switch to a new way of working. The research was supported by a SWOT analysis.