Shawn Martey

Sustainable polymers have attracted interest due to their ability to biodegrade under specific conditions in soil, compost, and the marine environment; however, they have comparatively lower mechanical properties, limiting their widespread use. This study explores the effect of incorporating waste soy biomass into sustainable polymers (including biodegradable and biobased) on the thermal and mechanical properties of the resultant blends. The dispersion of the waste soy biomass in the polymer matrix is also investigated in relation to particle size (17 µm vs. 1000 µm). Fine waste soy biomass did not significantly affect the melting temperature of the polymers (polyhydroxyalkanoates, polybutylene adipate terephthalate, polybutylene adipate terephthalate/poly(lactic) acid, and biobased linear low-density polyethylene) used in this study, but their enthalpy of fusion decreased after soy was melt-blended with the polymers. The tensile modulus of the polymers filled with fine waste soy biomass powder (17 µm) was enhanced when melt-blended as compared to unfilled polymers. Additionally, it was found that fine waste soy powder (17 µm) increased the tensile modulus of the polymer blends without significantly affecting processability, while coarse waste soy meal (1000 µm) generally reduced elongation at break due to poor dispersion and stress concentration; however, this effect was less pronounced in PHA blends, where improved compatibility was observed.

Plastic waste found in oceans has become a major concern because of its impact on marine organisms and human health. There is significant global interest in recycling these materials, but their reclamation, sorting, cleaning, and reprocessing, along with the degradation that occurs in the natural environment, all make it difficult to achieve high quality recycled resins from ocean plastic waste. To mitigate these limitations, various additives including clay and rubber were explored. In this study, we compounded different types of ocean-bound (o-HDPE and o-PP) and virgin polymers (v-LDPE and v-PS) with various additives including a functionalized clay, styrene-multi-block-copolymer (SMB), and ethylene-propylene-based rubber (EPR). Physical observation showed that all blends containing PS were brittle due to the weak interfaces between the polyolefin regions and the PS domains within the polymer blend matrix. Blends containing clay showed rough surfaces and brittleness because of the non-uniform distribution of clay particles in the polymer matrix. To evaluate the properties and compatibility of the blends, characterizations using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and small-amplitude oscillatory shear (SAOS) rheology were carried out. The polymer blend (v-LDPE, o-HDPE, o-PP) containing EPR showed improved elasticity. Incorporating additives such as rubber could improve the mechanical properties of polymer blends for recycling purposes.