Tadeu Mota Frutuoso
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Tadeu Mota Frutuoso has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Mikaël Cassé
CEA-LETI, Universit Grenoble Alpes, Grenoble, France
3 shared publications - Edoardo Catapano
IMEC
2 shared publications Fred Gaillard
CEA-LETI, Universit Grenoble Alpes, Grenoble, France
2 shared publications- Gerard Ghibaudo
Grenoble INP-Minatec, CROMA, Parvis Louis Neel, 38000 Grenoble (France), Grenoble Institute of Technology, Grenoble, France, France
2 shared publications - Philippe Ferrari
University Grenoble Alpes
2 shared publications - Agostino Apra
Univ. Grenoble Alpes, Grenoble INP, CEA, IRIG-PHELIQS, Grenoble F-38000, France
1 shared publication
Latest Publications
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Characterization of low thermal budget silicon MOSFETs for Digital and High frequency application on 3D sequential integration systems
Caractérisation des mosfets en silicium à budget thermique réduit pour applications numériques et haute fréquence sur des systèmes d'intégration séquentielle 3D: L'intégration séquentielle en 3D (3DSI) consiste à empiler de manière séquentielle des couches de dispositifs actifs à l'aide de connexions verticales ayant des dimensions similaires à celles des contacts standard Back-End-Of-Line (<100 nm). Cela permet la co-intégration de différents systèmes sur des couches séparées avec une densité d'interconnexion élevée et élimine les compromis coûteux liés à l'optimisation de différents dispositifs sur le même substrat. De même, la réduction des parasites d'interconnexion et l'intégration hétérogène offrent un grand potentiel pour les applications 5G à ondes millimétriques (mmW).Cependant, les dispositifs empilés en 3D présentent de nouveaux défis de processus. Les transistors de haut niveau doivent être traités à basse température (≤ 500 °C) pour préserver l'intégrité des dispositifs sur les niveaux inférieurs. L'intégration CMOS standard avec un faible budget thermique (LTB) entraîne une dégradation importante des performances. Néanmoins, de nouvelles avancées dans le processus d'intégration LTB du silicium ouvrent la voie au développement de dispositifs atteignant les mêmes performances que leurs homologues à haute température. Par conséquent, l'objectif de ce travail de doctorat est d'analyser les effets de ces nouveaux processus sur les caractéristiques électriques des dispositifs MOSFET LTB et d'établir des lignes directrices pour une optimisation ultérieure.Le manuscrit de cette thèse présente les principaux résultats obtenus grâce au récent développement de cette technologie et est présenté en trois parties :Activation des dopants de la source et du drain près de la jonction à l'aide d'un recuit d'épitaxie à l'état solide à basse température (SPER). L'étude est réalisée en estimant le profil de la jonction à l'aide d'une nouvelle technique de CV non destructive couplée à un modèle amélioré de cartographie conforme des capacités marginales des transistors. Les résultats sont utilisés pour comprendre le comportement électrique et les mécanismes de dégradation des dispositifs en fonction de la position de chevauchement.Propriétés de piégeage du matériau de permittivité faible (SiCO) utilisé pour l'oxyde d'espacement de grille à basse température et ses effets sur les performances du transistor. Deux mécanismes de piégeage sont identifiés sur ce matériau : les pièges d'interface en silicium rapides, liés à la qualité de l'oxyde natif, et les défauts profonds lents répartis dans le volume de l'oxyde SiCO. L'effet de ces pièges près de la région d'accès des performances électriques du transistor est étudié.Effet des principales étapes de processus à basse température sur les figures de mérite RF des dispositifs. L'objectif est d'évaluer les performances des dispositifs à des fréquences élevées. Les capacités parasites plus faibles des espacesurs SiCO, la résistance de grille réduite grâce au recuit laser aux nanosecondes UV et la mobilité élevée grâce à la contrainte de tension CESL sont des étapes clés à faible budget thermique contribuant à des transistors RF haute performance avec des figures de mérite similaires à celles des homologues à budget thermique élevé (HTB).
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Characterization of low thermal budget silicon MOSFETs for Digital and High frequency application on 3D sequential integration systems
Caractérisation des mosfets en silicium à budget thermique réduit pour applications numériques et haute fréquence sur des systèmes d'intégration séquentielle 3D: L'intégration séquentielle en 3D (3DSI) consiste à empiler de manière séquentielle des couches de dispositifs actifs à l'aide de connexions verticales ayant des dimensions similaires à celles des contacts standard Back-End-Of-Line (<100 nm). Cela permet la co-intégration de différents systèmes sur des couches séparées avec une densité d'interconnexion élevée et élimine les compromis coûteux liés à l'optimisation de différents dispositifs sur le même substrat. De même, la réduction des parasites d'interconnexion et l'intégration hétérogène offrent un grand potentiel pour les applications 5G à ondes millimétriques (mmW).Cependant, les dispositifs empilés en 3D présentent de nouveaux défis de processus. Les transistors de haut niveau doivent être traités à basse température (≤ 500 °C) pour préserver l'intégrité des dispositifs sur les niveaux inférieurs. L'intégration CMOS standard avec un faible budget thermique (LTB) entraîne une dégradation importante des performances. Néanmoins, de nouvelles avancées dans le processus d'intégration LTB du silicium ouvrent la voie au développement de dispositifs atteignant les mêmes performances que leurs homologues à haute température. Par conséquent, l'objectif de ce travail de doctorat est d'analyser les effets de ces nouveaux processus sur les caractéristiques électriques des dispositifs MOSFET LTB et d'établir des lignes directrices pour une optimisation ultérieure.Le manuscrit de cette thèse présente les principaux résultats obtenus grâce au récent développement de cette technologie et est présenté en trois parties :Activation des dopants de la source et du drain près de la jonction à l'aide d'un recuit d'épitaxie à l'état solide à basse température (SPER). L'étude est réalisée en estimant le profil de la jonction à l'aide d'une nouvelle technique de CV non destructive couplée à un modèle amélioré de cartographie conforme des capacités marginales des transistors. Les résultats sont utilisés pour comprendre le comportement électrique et les mécanismes de dégradation des dispositifs en fonction de la position de chevauchement.Propriétés de piégeage du matériau de permittivité faible (SiCO) utilisé pour l'oxyde d'espacement de grille à basse température et ses effets sur les performances du transistor. Deux mécanismes de piégeage sont identifiés sur ce matériau : les pièges d'interface en silicium rapides, liés à la qualité de l'oxyde natif, et les défauts profonds lents répartis dans le volume de l'oxyde SiCO. L'effet de ces pièges près de la région d'accès des performances électriques du transistor est étudié.Effet des principales étapes de processus à basse température sur les figures de mérite RF des dispositifs. L'objectif est d'évaluer les performances des dispositifs à des fréquences élevées. Les capacités parasites plus faibles des espacesurs SiCO, la résistance de grille réduite grâce au recuit laser aux nanosecondes UV et la mobilité élevée grâce à la contrainte de tension CESL sont des étapes clés à faible budget thermique contribuant à des transistors RF haute performance avec des figures de mérite similaires à celles des homologues à budget thermique élevé (HTB).
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (4) , 2598-2604
Experimental Analysis and Modeling of Self-Heating and Thermal Coupling in 28 nm FD-SOI CMOS Transistors Down to Cryogenic Temperatures
Thermal effects are a major concern for efficient cryoCMOS circuit design. This work presents an experimental analysis of self-heating (SH) effects and thermal propagation in fully depleted silicon-on-insulator (FD-SOI) technology, measured from room temperature (300 K) down to 4.2 K, using the gate resistance thermometry technique. The channel temperature increase and the in-plane temperature profile were investigated and analytically modeled, together with the thermal coupling between simultaneously operating devices. We demonstrated a major constraint for extremely low-temperature operation due to abrupt channel temperature rise even at sub-1 mW input power, which propagates over hundreds of nanometers along the Si layer. Thermal coupling was identified as a source for SH aggravation, and needs to be particularly optimized to limit the heating of cryo-circuits.
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (4) , 2598-2604
Experimental Analysis and Modeling of Self-Heating and Thermal Coupling in 28 nm FD-SOI CMOS Transistors Down to Cryogenic Temperatures
Thermal effects are a major concern for efficient cryoCMOS circuit design. This work presents an experimental analysis of self-heating (SH) effects and thermal propagation in fully depleted silicon-on-insulator (FD-SOI) technology, measured from room temperature (300 K) down to 4.2 K, using the gate resistance thermometry technique. The channel temperature increase and the in-plane temperature profile were investigated and analytically modeled, together with the thermal coupling between simultaneously operating devices. We demonstrated a major constraint for extremely low-temperature operation due to abrupt channel temperature rise even at sub-1 mW input power, which propagates over hundreds of nanometers along the Si layer. Thermal coupling was identified as a source for SH aggravation, and needs to be particularly optimized to limit the heating of cryo-circuits.
- 31 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (3) , 845-849
On the Zero Temperature Coefficient in Cryogenic FD-SOI MOSFETs
In this article, we propose an explanation of the origin of the zero-temperature coefficient (ZTC) in fully depleted-silicon on insulator (FD-SOI) MOSFETs capacitance curves from room to cryogenic temperature. It is demonstrated that the ZTC is a natural consequence of the Fermi–Dirac function controlling the carrier population. Moreover, based on transport analysis in linear region, it is proven that the ZTC point is preserved in the drain current transfer characteristics only if the mobility varies as the reciprocal temperature, i.e., if it is purely phonon scattering-limited. The inclusion of other defective scattering mechanisms dispels the ZTC point. Finally, the model developed is validated by some TCAD simulations down to deep cryogenic temperatures.
- 31 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (3) , 845-849
On the Zero Temperature Coefficient in Cryogenic FD-SOI MOSFETs
In this article, we propose an explanation of the origin of the zero-temperature coefficient (ZTC) in fully depleted-silicon on insulator (FD-SOI) MOSFETs capacitance curves from room to cryogenic temperature. It is demonstrated that the ZTC is a natural consequence of the Fermi–Dirac function controlling the carrier population. Moreover, based on transport analysis in linear region, it is proven that the ZTC point is preserved in the drain current transfer characteristics only if the mobility varies as the reciprocal temperature, i.e., if it is purely phonon scattering-limited. The inclusion of other defective scattering mechanisms dispels the ZTC point. Finally, the model developed is validated by some TCAD simulations down to deep cryogenic temperatures.
- 5 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (10) , 1171-1174
Nanowire-Based 3-D Transmission-Line Transformer for Millimeter-Wave Applications
In this letter, 3-D transformers based on transmission lines (TLs) working at mm-wave frequencies are presented. They were realized in a low-cost technology based on metallic-filled nanoporous membranes. Several transformers were designed and measured with different numbers of turns, from 1 to 6 turns. They exhibit working frequencies from 14.5 up to 110 GHz. The 1-dB bandwidth (BW) of the realized transformers is better than 12 GHz, and the insertion loss (IL) is between 1.1 and 1.6 dB, thus demonstrating a high efficiency at mm-waves. Transformers could be further improved by better optimizing the TLs and their return current path, which is a key parameter to be considered, given the distributed nature of the proposed transformers.
- 5 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (10) , 1171-1174
Nanowire-Based 3-D Transmission-Line Transformer for Millimeter-Wave Applications
In this letter, 3-D transformers based on transmission lines (TLs) working at mm-wave frequencies are presented. They were realized in a low-cost technology based on metallic-filled nanoporous membranes. Several transformers were designed and measured with different numbers of turns, from 1 to 6 turns. They exhibit working frequencies from 14.5 up to 110 GHz. The 1-dB bandwidth (BW) of the realized transformers is better than 12 GHz, and the insertion loss (IL) is between 1.1 and 1.6 dB, thus demonstrating a high efficiency at mm-waves. Transformers could be further improved by better optimizing the TLs and their return current path, which is a key parameter to be considered, given the distributed nature of the proposed transformers.
- 27 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (7) , 3157-3162
RF Performance of Devices Processed in Low-Temperature Sequential Integration
RF performance and intertier coupling of CMOS processed in 3-D sequential integration are investigated. pMOS transistor fabricated with a 500 °C thermal budget features good RF figures of merit with ${f}_{t} =105$ GHz and ${f}_{\text {max}} =175$ GHz for a gate length of 45 nm and ${V}_{\text {DD}} = -1$ V. Moreover, we demonstrate that the low- ${k}$ SiCO oxide spacer and low polysilicon gate resistance obtained with the low temperature process contribute to ${f}_{\text {max}}$ results that are better than high temperature process (above 1000°). Finally, we illustrate the crosstalk effects and the influence of the low-tier transistor gate voltage ${V}_{\text {G}}$ on the top-tier threshold voltage ${V}_{T}$ . We also show that a polysilicon ground shield integrated under the top-tier transistor substantially attenuates the intertier RF field coupling effects.
- 27 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (7) , 3157-3162
RF Performance of Devices Processed in Low-Temperature Sequential Integration
RF performance and intertier coupling of CMOS processed in 3-D sequential integration are investigated. pMOS transistor fabricated with a 500 °C thermal budget features good RF figures of merit with ${f}_{t} =105$ GHz and ${f}_{\text {max}} =175$ GHz for a gate length of 45 nm and ${V}_{\text {DD}} = -1$ V. Moreover, we demonstrate that the low- ${k}$ SiCO oxide spacer and low polysilicon gate resistance obtained with the low temperature process contribute to ${f}_{\text {max}}$ results that are better than high temperature process (above 1000°). Finally, we illustrate the crosstalk effects and the influence of the low-tier transistor gate voltage ${V}_{\text {G}}$ on the top-tier threshold voltage ${V}_{T}$ . We also show that a polysilicon ground shield integrated under the top-tier transistor substantially attenuates the intertier RF field coupling effects.
- Open Access
- 20 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 9, 582-590
Statistical and Electrical Modeling of FDSOI Four-Gate Qubit MOS Devices at Room Temperature
This paper presents an electrical characterization and a compact modeling of FD-SOI four-gate qubit MOS devices, carried out at room temperature and in linear regime. The main figures of merit are extracted from average drain current curves using Y – function method. Poisson solver-based simulations are performed to interpret the experimental data, in particular the influence among gates and the effective channel length modulation. Furthermore, a drain current matching analysis between gates is conducted, and the main variability parameters are extracted. Our results, despite the unconventional device engineering, show a variability performance comparable to the state-of-the-art 28nm FD-SOI technology. Finally, a Lambert function based model is developed to validate both the electrical and statistical characterization. It is assumed, according to the experimental data, that the four gate device can be modeled as the series of four identical and independent transistors. Including the contribution of source and drain access resistance it has been possible to reproduce the device behavior at high external gates voltages.
- 20 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 9, 582-590
Open AccessStatistical and Electrical Modeling of FDSOI Four-Gate Qubit MOS Devices at Room Temperature
This paper presents an electrical characterization and a compact modeling of FD-SOI four-gate qubit MOS devices, carried out at room temperature and in linear regime. The main figures of merit are extracted from average drain current curves using Y – function method. Poisson solver-based simulations are performed to interpret the experimental data, in particular the influence among gates and the effective channel length modulation. Furthermore, a drain current matching analysis between gates is conducted, and the main variability parameters are extracted. Our results, despite the unconventional device engineering, show a variability performance comparable to the state-of-the-art 28nm FD-SOI technology. Finally, a Lambert function based model is developed to validate both the electrical and statistical characterization. It is assumed, according to the experimental data, that the four gate device can be modeled as the series of four identical and independent transistors. Including the contribution of source and drain access resistance it has been possible to reproduce the device behavior at high external gates voltages.