SRSilvia Rodríguez-Narciso

Silvia Rodríguez-Narciso

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Silvia Rodríguez-Narciso has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • mixediffusion: Mixed-Effects Diffusion Models with General Drift

    by Pedro Abraham Montoya Calzada, Rogelio Salinas Gutiérrez, Silvia Rodríguez-Narciso, Netzahualcóyotl Castañeda-Leyva

    Provides tools for likelihood-based inference in one-dimensional stochastic differential equations with mixed effects using expectation–maximization (EM) algorithms. The package supports Wiener and Ornstein–Uhlenbeck diffusion processes with user-specified drift functions, allowing flexible parametric forms including polynomial, exponential, and trigonometric structures. Estimation is performed via Markov chain Monte Carlo EM.

  • degradr: Estimating Remaining Useful Life with Linear Mixed Effects Models

    by Pedro Abraham Montoya Calzada, Rogelio Salinas Gutiérrez, Silvia Rodríguez-Narciso, Netzahualcóyotl Castañeda-Leyva

    Provides tools for estimating the Remaining Useful Life (RUL) of degrading systems using linear mixed-effects models and creating a health index. It supports both univariate and multivariate degradation signals. For multivariate inputs, the signals are merged into a univariate health index prior to modeling. Linear and exponential degradation trajectories are supported (the latter using a log transformation). Remaining Useful Life (RUL) distributions are estimated using Bayesian updating for new units, enabling on-site predictive maintenance. Based on the methodology of Liu and Huang (2016) .

  • Instrucción de procesamiento como una alternativa para la enseñanza de estructuras gramaticales en lenguas extranjeras

    by Universidad Autónoma de Aguascalientes, Luis Humberto Rodríguez-Silva, Silvia Rodríguez-Narciso, Lorena Paulina Velázquez-Macía

    En los últimos 15 años, la investigación en el área de la enseñanza de la gramática en una lengua extranjera bajo un enfoque inductivo, ha incrementado gradualmente en relación con la que se realiza sobre el enfoque deductivo o tradicional, así como de la que incluye ambos enfoques de enseñanza (Goo et al., 2015; Spada & Tomita, 2010). El propósito de la presente investigación es constatar la eficiencia del modelo de Instrucción de Procesamiento (PI) de VanPatten (1996), el cual incluye tanto el enfoque deductivo como el inductivo para la enseñanza de cláusulas relativas en inglés. Esta investigación, de corte comparativo y descriptivo, se realizó en modalidad virtual debido a la pandemia del Covid-19, se administró una serie de tests para conocer el desempeño de los estudiantes con relación al aprendizaje de la estructura de cláusulas relativas, a través del modelo de PI. Para ello, se obtuvo la participación de tres grupos de alumnos con experiencias diferentes en cuanto a los años que han estado estudiando el idioma inglés: un grupo de alumnos con menor experiencia (grupo de intervención), un grupo con más experiencia y un grupo con la mayor experiencia. Estos dos últimos grupos se clasificaron como grupos de comparación. El análisis estadístico de los resultados recuperados demuestra una diferencia significativa sobre el desempeño de los alumnos del grupo de intervención en el post-test, el cual fue administrado después de la intervención con el modelo de PI. Se observa, además, que los grupos de comparación tuvieron un desempeño muy similar entre ellos durante el post-test y un mejor desempeño en cuanto al grupo de intervención, lo cual permite sugerir que el modelo de VanPatten resulta eficaz en la enseñanza de estructuras gramaticales específicas (como las cláusulas relativas) en el idioma inglés.

  • Open Access

    Mechanical Response of Industrial Concrete with SFRC and PFRC

    by José Ángel Ortíz-Lozano, Silvia Rodríguez-Narciso, Julián Carrillo, Juan Antonio Hernández-Andrade, Jesús Pacheco-Martínez, Martín Hernández-Marín, Albert de la Fuente-Antequera

    Concrete is one of the most commonly used construction materials in the world due to its versatility. There are different types of concrete according to the required mechanical responses, and these will depend on the composition of the elements. Therefore, additional elements have been developed to improve the properties and conditions of concrete. One of these elements is reinforcing fibers made of steel, polypropylene, glass, and so on, which, according to the base material, geometry, and dosage, improve the mechanical and workability properties and decrease and/or prevent the generation of cracks, which are some of the most common problems in industrial slabs. This study performs an analysis of the changes in the mechanical properties of concrete (compressive strength, rupture modulus, modulus of elasticity, Poissons ratio, and residual stress) due to the addition of fiber-reinforced concrete (FRC) to determine the physical and mechanical conditions of the fibers that improve the concrete and its application in industrial concrete. Due to the large number of samples and variables, advanced statistical methods (analysis of variance and comparative index) were used in the numerical study, which allowed to analyze and compare several results at the same time. This research is divided into two stages. In the first stage, six steel fibers (with a dosage of 2.7, 6, and 11 and three of 28kg/m3) and five polypropylene fibers (with a dosage of 0.6, 2.15, and 2.7 and two of 3kg/m3) were used in the study, and compression and bending tests (ASTM C39 and C78, respectively) were performed on 35 cylinders and 45 beams. Improvements were identified in several fiber-reinforced concrete samples in terms of compressive strength: 67 of the steel fiber samples and 100 of the polypropylene fiber samples had values above the average value of the simple concrete; in terms of the modulus of rupture, 83 of the steel fiber samples and 80 of the polypropylene fiber samples had values above the average value of the simple concrete. In the second stage, one type of steel fiber and one type of polypropylene fiber were selected for a second mechanical analysis (64 cylinders, 72 beams, and 15 slabs) with dosages of 20, 30, and 40kg/m3 and 2.13, 4.25, and 6.38kg/m3, respectively. In the second stage, statistical analysis and modeling with nonlinear analysis were used to evaluate the results, where residual strength improved but Poissons ratio decreased when the dosage of fibers was increased.


  • TOU: Transformed Ornstein-Uhlenbeck Model for Adsorption Kinetics

    by Silvia Rodríguez-Narciso, Juan Antonio Lozano-Álvarez, Rogelio Salinas-Gutiérrez, Netzahualcóyotl Castañeda-Leyva

  • Prediction of electricity prices for non‐regulated markets based on a power transformed mean reverting process

    by Netzahualcóyotl Castañeda‐Leyva, Hugo Hernández‐Ramos, Leonel Ramón Pérez‐Hernández, Silvia Rodríguez‐Narciso


  • An Analysis of the Writing Skill of Mexican Learners of English

    by Universidad Autónoma de Aguascalientes, Luis Humberto Rodrí­gUez-Silva, Benjamin L., Silvia Rodrí­gUez-Narciso

    Analyzing the writing skill of English language learners emerges from understanding the accuracy, fluency, and complexity of texts and classifying written errors according to syntax, morphology, and lexicon. In this quantitative descriptive-analysis study, the participants included thirty one Spanish-speaking, Mexican English language learners who were enrolled in an English skills development course designed for B1-B2 English language learners. The participants had 50 minutes to write a narrative essay based on an image that served as context. Of the 31 texts, the findings show that 901 total errors were classified into three metalinguistic categories (i.e., syntax, morphology, and lexicon) and in terms of written development (i.e., accuracy, fluency, and complexity), suggesting that a holistic approach to instruction and assessment in the English language classroom can provide a clearer context when developing writing skills.


  • Open Access

    A Stochastic Model for Adsorption Kinetics

    by Silvia Rodríguez-Narciso, Juan Antonio Lozano-Álvarez, Rogelio Salinas-Gutiérrez, Netzahualcóyotl Castañeda-Leyva

    A novel stochastic model is proposed to characterize the adsorption kinetics of pollutants including dyes (direct red 80 and direct blue 1), fluoride ions, and cadmium ions removed by calcium pectinate (Pec-Ca), aluminum xanthanate (Xant-Al), and reed leaves, respectively. The model is based on a transformation over time following the Ornstein–Uhlenbeck stochastic process, which explicitly includes the uncertainty involved in the adsorption process. The model includes stochastic versions of the pseudo-first-order (PFO), pseudo-second-order (PSO), and pseudo-[ ]-order (PNO) models. It also allows the estimation of the adsorption parameters, including the maximum removal capacity ([ ]), the adsorption rate constant ([ ]), the reaction pseudoorder ([ ]), and the variability [ ]. The model fitted produced [ ] values similar to those of the nonstochastic versions of the PFO, PSO, and PNO models; however, the obtained values for each parameter indicate that the stochastic model better reproduces the experimental data. The [ ] values of the Pec-Ca-dye, Xant-Al-fluoride, and reed leaf-Cd+2 systems ranged from 2.0 to 9.7, 0.41 to 1.9, and 0.04 and 0.29 mg/g, respectively, whereas the values of [ ] ranged from 0.051 to 0.286, 0.743 to 75.73, and 0.756 to 8.861 (mg/g)1- n/min, respectively. These results suggest a variability in the parameters [ ] and [ ] inherent to the natures of the adsorbate and adsorbent. The obtained [ ] values ranged from 1.13 to 2.02 for the Pec-Ca-dye system, 1.0–3.5 for the Xant-Al-fluoride system, and 1.8–3.8 for the reed leaf-Cd+2 system. These ranges indicate the flexibility of the stochastic model to obtain fractional [ ] values, resulting in high [ ] values. The variability in each system was evaluated based on [ ]. The developed model is the first to describe pollutant removal kinetics based on a stochastic differential equation.


  • Open Access

    Frecuencia de complicaciones médicas en un grupo de pacientes mayores de 80 años en hemodiálisis

    by Paloma Michelle Pèrez Chàvez, Gerardo Gilberto Azùa Dìaz, Ma del Carmen Terrones Saldìvar, Silvia Rodrìguez Narciso

    Introducción: La enfermedad renal crónica (ERC) es una patología con incremento en la frecuencia en la población de adultos mayores de 80 años o más en México en los últimos años. Las complicaciones y pronóstico de la enfermedad en esta población son desconocidos. Objetivo: Conocer la frecuencia de complicaciones, tiempo y causas de muerte y pronóstico de pacientes mayores de 80 años que inician Hemodiálisis (HD). Material y métodos: Estudio retrospectivo, transversal, observacional con una muestra de 30 pacientes mayores de 80 años con inicio de HD de enero 2014 a enero del 2017. Resultados: La sobrevida de los pacientes aumentó hasta ocho meses en pacientes sometidos a HD en comparación con aquellos pacientes que se trataron en forma conservadora. El 80% de los pacientes que ingresaron a HD murieron en los primeros 12 meses. Las principales causas de muerte fueron procesos infecciosos asociados a catéter de HD, infarto agudo de miocardio y enfermedad vascular cerebral (EVC) hemorrágico. Los antecedentes cardiovasculares demostraron ser de suma importancia, al aumentar la probabilidad del riesgo de muerte hasta 4 veces durante los primeros 12 meses. Conclusiones: Se obtuvo evidencia de aumento de probabilidad de muerte en el primer año de HD en pacientes mayores de 80 años que presentan antecedentes enfermedad coronaria (IAM, angioplastía y bypass), tabaquismo, EVC con hemiplejía, hipertrofia ventricular izquierda (HVI) por ECOTT y uso de catéter de hemodiálisis. LUXMÉDICA, AÑO 14, NÚMERO 40, ENERO-ABRIL 2019 PP

  • Optimal sequential Bayesian analysis for degradation tests

    by Silvia Rodríguez-Narciso, J. Andrés Christen

    Degradation tests are especially difficult to conduct for items with high reliability. Test costs, caused mainly by prolonged item duration and item destruction costs, establish the necessity of sequential degradation test designs. We propose a methodology that sequentially selects the optimal observation times to measure the degradation, using a convenient rule that maximizes the inference precision and minimizes test costs. In particular our objective is to estimate a quantile of the time to failure distribution, where the degradation process is modelled as a linear model using Bayesian inference. The proposed sequential analysis is based on an index that measures the expected discrepancy between the estimated quantile and its corresponding prediction, using Monte Carlo methods. The procedure was successfully implemented for simulated and real data.