HUHiroki Ubukata

Hiroki Ubukata

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hiroki Ubukata has a total of 138 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Electride Formation of (Ca 1– x Sr x ) 3 CrN 3 Induced by Negative Chemical Pressure

    by Tatsuya Tsumori, Yu Cao, Daichi Kato, Suguru Yoshida, Yao Yuan, Hiroki Ubukata, Kantaro Murayama, Yuki Sasahara, Hiroshi Kageyama

    Electrides are materials in which electrons occupy interstitial sites and act as anions. Conventional strategies for stabilizing electrides have relied on either anion removal or the application of high pressure. Here, we show that in (Ca 1– x Sr x ) 3 CrN 3 , negative chemical pressure induces electride formation together with a reconstruction of the crystal framework. Structural analyses reveal that overbonded Cr undergoes oxidation, releasing electrons while driving a redistribution of nitrogen within the framework, which reconstructs the Ca sublattice into one‐dimensional (1D) octahedral chains that host interstitial electrons. High‐pressure experiments and first‐principles calculations further demonstrate that external pressure destabilizes the electride phase, whereas negative chemical pressure stabilizes it. Moreover, (Ca 0.35 Sr 0.65 ) 3 CrN 3 exhibits metallic‐like conduction, providing the first evidence for itinerant anionic electrons in a 1D electride. The enhanced itinerancy is attributed to the short interstitial‐electron separation and the resulting increase in electride‐band bandwidth. These findings establish negative chemical pressure as a new design principle for electrides and identify interstitial‐electron separation as a key parameter governing electron itinerancy in low‐dimensional electrides.

  • Electride Formation of (Ca 1– x Sr x ) 3 CrN 3 Induced by Negative Chemical Pressure

    by Tatsuya Tsumori, Yu Cao, Daichi Kato, Suguru Yoshida, Yao Yuan, Hiroki Ubukata, Kantaro Murayama, Yuki Sasahara, Hiroshi Kageyama

    Electrides are materials in which electrons occupy interstitial sites and act as anions. Conventional strategies for stabilizing electrides have relied on either anion removal or the application of high pressure. Here, we show that in (Ca 1– x Sr x ) 3 CrN 3 , negative chemical pressure induces electride formation together with a reconstruction of the crystal framework. Structural analyses reveal that overbonded Cr undergoes oxidation, releasing electrons while driving a redistribution of nitrogen within the framework, which reconstructs the Ca sublattice into one‐dimensional (1D) octahedral chains that host interstitial electrons. High‐pressure experiments and first‐principles calculations further demonstrate that external pressure destabilizes the electride phase, whereas negative chemical pressure stabilizes it. Moreover, (Ca 0.35 Sr 0.65 ) 3 CrN 3 exhibits metallic‐like conduction, providing the first evidence for itinerant anionic electrons in a 1D electride. The enhanced itinerancy is attributed to the short interstitial‐electron separation and the resulting increase in electride‐band bandwidth. These findings establish negative chemical pressure as a new design principle for electrides and identify interstitial‐electron separation as a key parameter governing electron itinerancy in low‐dimensional electrides.

  • Structural stability and polymorphic transitions in LnSI (Ln = lanthanides)

    by Shohei Kawanishi, Suguru Yoshida, Hiroki Ubukata, Congling Yin, Yang Yang, Ryusei Morimoto, Simon J. Clarke, Hiroshi Kageyama

    Chemical substitution and physical pressure drive Martensitic-like polymorphic transitions among FeOCl-, SmSI-, and SrI2-type structures in LnSI mixed-anion compounds, governed by the cation-to-anion radius ratio as a unifying geometric factor.


  • Tuning Proton Conduction by Staggered Arrays of Polar Preyssler-Type Oxoclusters

    by Tsukasa Iwano, Daiki Akutsu, Hiroki Ubukata, Naoki Ogiwara, Yuji Kikukawa, Shuo Wang, Li-Kai Yan, Hiroshi Kageyama, Sayaka Uchida

    Polyoxometalates (POMs), anionic nanosized oxoclusters that can be considered as fragments of metal oxides, have been extensively studied for their diverse composition and structure, showing promise in various fields such as catalysis and electronics. Proton conduction, relevant to catalysis and electronics, has attracted interest in materials chemistry, and POM anions are advantageous in terms of their proton carrier density and mobility. Recently, polar POMs have attracted attention for their unique ferroelectric behaviors, yet they have been little studied with regard to proton conduction, as their polarity has generally been believed to have a negative impact. Here, we propose that polar POMs can be used to align polar proton carriers, such as H2O and polymers, to construct efficient proton-conducting pathways. In this study, we present ionic crystals composed of polar Preyssler-type POMs ([Xn+(H2O)P5W30O110](15-n)-, Xn+ = Ca2+, Eu3+) and K+ exhibiting ultrahigh proton conductivity surpassing 10-2 S cm-1, which is required for practical applications. In contrast, ionic crystals with nonpolar Preyssler-type POMs show an order of magnitude lower proton conductivity. Structural and spectroscopic studies combined with theoretical calculations reveal that proton carriers align with the aid of staggered arrays of polar POMs, forming a hydrogen-bonding network favorable for proton conduction. This study integrates molecular chemistry by the design of POMs and solid-state chemistry by exploring long-range proton conduction mechanisms, offering novel insights for future materials design.


  • Open Access

    Internal strain-driven bond manipulation and band engineering in Bi 2− x Sb x YO 4 Cl photocatalysts with triple fluorite layers

    by Artem Gabov, Daichi Kato, Hiroki Ubukata, Ryotaro Aso, Naoji Kakudou, Koji Fujita, Hajime Suzuki, Osamu Tomita, Akinori Saeki, Ryu Abe, et al.

    Internal strain within the triple fluorite layer of Bi 2− x Sb x YO 4 Cl explains bond breaking and allows bandgap engineering.


  • Structure Transformation of Methylammonium Polyoxomolybdates via In-Solution Acidification and Solid-State Heating from Methylammonium Monomolybdate and Application as Negative Staining Reagents for Coronavirus Observation

    by Ndaru Candra Sukmana, Sugiarto, Jun Shinogi, Takuo Minato, Tatsuhiro Kojima, Masaru Fujibayashi, Sadafumi Nishihara, Katsuya Inoue, Yu Cao, Tong Zhu, et al.

    We prepared polyoxomolybdates with methylammonium countercations from methylammonium monomolybdate, (CH3NH3)2[MoO4], through two dehydrative condensation methods, acidifying in the aqueous solution and solid-state heating. Discrete (CH3NH3)10[Mo36O112(OH)2(H2O)14], polymeric ((CH3NH3)8[Mo36O112(H2O)14])n, and polymeric ((CH3NH3)4[γ-Mo8O26])n were selectively isolated via pH control of the aqueous (CH3NH3)2[MoO4] solution. The H2SO4-acidified solution of pH < 1 produced "sulfonated α-MoO3", polymeric ((CH3NH3)2[(MoO3)3(SO4)])n. The solid-state heating of (CH3NH3)2[MoO4] in air released methylamine and water to produce several methylammonium polyoxomolybdates in the sequence of discrete (CH3NH3)8[Mo7O24-MoO4], discrete (CH3NH3)6[Mo7O24], discrete (CH3NH3)8[Mo10O34], and polymeric ((CH3NH3)4[γ-Mo8O26])n, before their transformation into molybdenum oxides such as hexagonal-MoO3 and α-MoO3. Notably, some of their polyoxomolybdate structures were different from polyoxomolybdates produced from ammonium molybdates, such as (NH4)2[MoO4] or (NH4)6[Mo7O24], indicating that countercation affected the polyoxomolybdate structure. Moreover, among the tested polyoxomolybdates, (CH3NH3)6[Mo7O24] was the best negative staining reagent for the observation of the SARS-CoV-2 virus using transmission electron microscopy.


  • Mechanochemical Synthesis of Perovskite Oxyhydrides: Insights from Shear Modulus

    by Yuki Sasahara, Rina Terada, Hiroki Ubukata, Miho Asahi, Daichi Kato, Tatsuya Tsumori, Morito Namba, Zefeng Wei, Cédric Tassel, Hiroshi Kageyama

    Perovskite oxyhydrides have attracted recent attention due to their intriguing properties such as ionic conductivity and catalysis, but their repertoire is still restricted compared to perovskite oxynitrides and oxyfluorides. Historically, perovskite oxyhydrides have been prepared mostly by topochemical reactions and high-pressure (HP) reactions, while in this study, we employed a mechanochemical (MC) approach, which enables the synthesis of a series of ABO2H-type oxyhydrides, including those with the tolerance factor (t) much smaller than 1 (e.g., SrScO2H with t = 0.936) which cannot be obtained by HP synthesis. The octahedral tilting, often present in perovskite oxides, does not occur, suggesting that the lack of π-symmetry of the H 1s orbital and the large polarization destabilize tilted low-symmetry structures. Interestingly, SrCrO2H (t = 0.997), previously reported with the HP method, was not achieved with the MC method. A comparative analysis revealed a correlation between the feasibility of MC reactions and the (calculated) shear modulus of the starting reagents (binary oxides and hydrides). Notably, this indicator is not exclusive to oxyhydride perovskites but extends to oxide perovskites (SrMO3). This study demonstrates that MC synthesis offers unique opportunities not only to expand the compositional space in oxyhydrides in various structural types but also to provide a guide for the choice of starting materials for the synthesis of other compounds.


  • Intersite Charge Transfer through Eu 4f Band Engineering in Eu1–xSrxVO2H Oxyhydride Films

    by Morito Namba, Hiroshi Takatsu, Kantaro Murayama, Yuki Shibazaki, Naoki Ishimatsu, Hiroki Ubukata, Ryo Terada, Noriyuki Yoshimura, Shohei Kawanishi, Takahito Terashima, et al.


  • Large Perpendicular Magnetic Anisotropy Induced by an Intersite Charge Transfer in Strained EuVO2H Films

    by Morito Namba, Hiroshi Takatsu, Riho Mikita, Yao Sijia, Kantaro Murayama, Hao-Bo Li, Ryo Terada, Cédric Tassel, Hiroki Ubukata, Masayuki Ochi, et al.

    Perovskite oxides ABO3 continue to be a major focus in materials science. Of particular interest is the interplay between A and B cations as exemplified by intersite charge transfer (ICT), which causes novel phenomena including negative thermal expansion and metal–insulator transition. However, the ICT properties were achieved and optimized by cationic substitution or ordering. Here we demonstrate an anionic approach to induce ICT using an oxyhydride perovskite, EuVO2H, which has alternating layers of EuH and VO2. A bulk EuVO2H behaves as a ferromagnetic insulator with a relatively high transition temperature (TC) of 10 K. However, the application of external pressure to the EuIIVIIIO2H bulk or compressive strain from the substrate in the thin films induces ICT from the EuIIH layer to the VIIIO2 layer due to the extended empty V dxy orbital. The ICT phenomenon causes the VO2 layer to become conductive, leading to an increase in TC that is dependent on the number of carriers in the dxy orbitals (up to a factor of 4 for 10 nm thin films). In addition, a large perpendicular magnetic anisotropy appears with the ICT for the films of <100 nm, which is unprecedented in materials with orbital-free Eu2+, opening new perspectives for applications. The present results provide opportunities for the acquisition of novel functions by alternating transition metal/rare earth layers with heteroanions.


  • High H– Conductivities along the ab-Planes of La2LiHO3 Epitaxial Thin Films

    by Yuki Sasahara, Takashi Hirose, Masataka Yoshimoto, Naoki Matsui, Shigeru Kobayashi, Hiroki Ubukata, Fumitaka Takeiri, Kota Suzuki, Masaaki Hirayama, Kazunori Nishio, et al.