Wladimir Sarlin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wladimir Sarlin has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Cyprien Morize
Université Paris-Saclay, CNRS, Laboratoire FAST, F-91405 Orsay, France
6 shared publications - Alban Sauret
Department of Mechanical Engineering, University of Maryland, College Park, Maryland 20742, USA
5 shared publications - Philippe Gondret
Université Paris-Saclay, CNRS, Laboratoire FAST, F-91405 Orsay, France
5 shared publications Alban Sauret
Department of Mechanical Engineering University of California Santa Barbara 93106 CA USA
3 shared publicationsPhilippe Gondret
Université Paris-Saclay CNRS Laboratoire FAST F-91405 Orsay France
3 shared publications- Axel Huerre
Laboratoire Matière et Systèmes Complexes, CNRS UMR 7057, Université Paris Cité, Paris, France
2 shared publications
Latest Publications
- 7 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Ondes impulsées à la surface de l'eau par un effondrement granulaire
Les tsunamis comptent parmi les catastrophes naturelles les plus destructrices pour les populations côtières de par le monde. De tels évènements peuvent, entre autres, être générés lors d'un glissement de terrain ou d'un éboulement massif, par exemple quand un pan de montagne ou de volcan se déstabilise et chute dans un lac, un fjord ou dans l'océan. L'objectif de cette thèse est d'étudier la génération de telles vagues à travers l'utilisation d'une configuration expérimentale modèle, dans laquelle une colonne de matériau granulaire de section rectangulaire, qui modélise le glissement de terrain, s'effondre dans une cuve remplie d'eau initialement au repos. Des mesures systématiques sont réalisées, en variant la profondeur de liquide tout comme la géométrie de la colonne de grains, afin de remonter par traitement d'images aux propriétés de l'avalanche granulaire comme à celles de l'onde produite. Dans un premier temps, la dynamique d'effondrement en l'absence d'eau est étudiée, ce qui permet de mettre en lumière les échelles de temps caractéristiques à l'œuvre ainsi que l'impact d'une libération progressive du milieu granulaire. Au cours des expériences de génération d'onde, différents régimes de vagues sont obtenus et analysés en fonction du nombre de Froude local, lequel correspond au rapport de la vitesse horizontale maximale du front de grains à l'interface avec l'eau à la célérité des ondes gravitaires linéaires en eau peu profonde. Des ressauts, des ondes solitaires ou encore des vagues de Cauchy-Poisson sont observées, selon que ce paramètre présente des valeurs respectivement élevées, modérées ou faibles. Une analyse hydrodynamique est proposée afin de relier ces régimes à des modèles classiques d'ondes : les vagues générées présentent alors un caractère soit non-linéaire en eau peu profonde (ressauts, ondes solitaires), soit linéaire lorsqu'on tend vers la limite d'eau profonde. Enfin, un modèle est proposé, afin de relier l'amplitude maximale de la vague produite aux paramètres initiaux, en combinant les résultats obtenus au sujet de la dynamique de l'effondrement et ceux de l'hydrodynamique des ondes en eau peu profonde. L'approche se compare avec succès aux résultats expérimentaux, et explique l'influence des différents nombres sans dimensions clés proposés dans la littérature sur le sujet. Ce modèle permet une meilleur compréhension de la physique sous-jacente aux tsunamis engendrés par des glissements de terrain survenant dans un contexte d'eau peu profonde.
- 7 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Ondes impulsées à la surface de l'eau par un effondrement granulaire
Les tsunamis comptent parmi les catastrophes naturelles les plus destructrices pour les populations côtières de par le monde. De tels évènements peuvent, entre autres, être générés lors d'un glissement de terrain ou d'un éboulement massif, par exemple quand un pan de montagne ou de volcan se déstabilise et chute dans un lac, un fjord ou dans l'océan. L'objectif de cette thèse est d'étudier la génération de telles vagues à travers l'utilisation d'une configuration expérimentale modèle, dans laquelle une colonne de matériau granulaire de section rectangulaire, qui modélise le glissement de terrain, s'effondre dans une cuve remplie d'eau initialement au repos. Des mesures systématiques sont réalisées, en variant la profondeur de liquide tout comme la géométrie de la colonne de grains, afin de remonter par traitement d'images aux propriétés de l'avalanche granulaire comme à celles de l'onde produite. Dans un premier temps, la dynamique d'effondrement en l'absence d'eau est étudiée, ce qui permet de mettre en lumière les échelles de temps caractéristiques à l'œuvre ainsi que l'impact d'une libération progressive du milieu granulaire. Au cours des expériences de génération d'onde, différents régimes de vagues sont obtenus et analysés en fonction du nombre de Froude local, lequel correspond au rapport de la vitesse horizontale maximale du front de grains à l'interface avec l'eau à la célérité des ondes gravitaires linéaires en eau peu profonde. Des ressauts, des ondes solitaires ou encore des vagues de Cauchy-Poisson sont observées, selon que ce paramètre présente des valeurs respectivement élevées, modérées ou faibles. Une analyse hydrodynamique est proposée afin de relier ces régimes à des modèles classiques d'ondes : les vagues générées présentent alors un caractère soit non-linéaire en eau peu profonde (ressauts, ondes solitaires), soit linéaire lorsqu'on tend vers la limite d'eau profonde. Enfin, un modèle est proposé, afin de relier l'amplitude maximale de la vague produite aux paramètres initiaux, en combinant les résultats obtenus au sujet de la dynamique de l'effondrement et ceux de l'hydrodynamique des ondes en eau peu profonde. L'approche se compare avec succès aux résultats expérimentaux, et explique l'influence des différents nombres sans dimensions clés proposés dans la littérature sur le sujet. Ce modèle permet une meilleur compréhension de la physique sous-jacente aux tsunamis engendrés par des glissements de terrain survenant dans un contexte d'eau peu profonde.
- 17 September 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1019, A31
The macroscopic contact angle of water on ice
Wettability quantifies the affinity of a liquid over a substrate and determines whether the surface is repellent or not. When both the liquid and the solid phases are made of the same chemical substance and are at thermal equilibrium, complete wetting is expected in principle, as observed, for instance, with drops of molten metals spreading on their solid counterparts. However, this is not the case for water on ice. Although there is a growing consensus on the partial wetting of water on ice and several estimates available for the value of the associated macroscopic contact angle, the question of whether these values correspond to the contact angle at mechanical and thermal equilibrium is still open. In the present paper, we address this issue experimentally and demonstrate the existence of such a macroscopic contact angle of water on ice, from measurements and theoretical arguments. Indeed, when depositing water droplets on smooth polycrystalline ice layers with accurately controlled surface temperatures, we observe that spreading is unaffected by thermal effects and phase change close enough to the melting point (namely, for undercoolings below 1 K) so that conditions of thermal equilibrium are closely approached. Whereas the short time motion of the contact line is driven by an inertial-capillary balance, the evolution towards mechanical equilibrium is described by a viscous-capillary dynamics and is therefore capillary – and not thermally – related. Moreover, we show that the resulting contact angle remains constant for undercoolings below 1 K. In this way, we show the existence of a non-zero macroscopic contact angle of water on ice under conditions of mechanical and thermal equilibrium, which is very close to $12^\circ$ . We anticipate this key finding will significantly improve the understanding of capillary flows in the presence of phase change, which is of special interest in the realm of ice morphogenesis and glaciology, and will also be beneficial with the aim of developing numerical methods for resolving triple-line dynamics.- 17 September 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1019, A31
The macroscopic contact angle of water on ice
Wettability quantifies the affinity of a liquid over a substrate and determines whether the surface is repellent or not. When both the liquid and the solid phases are made of the same chemical substance and are at thermal equilibrium, complete wetting is expected in principle, as observed, for instance, with drops of molten metals spreading on their solid counterparts. However, this is not the case for water on ice. Although there is a growing consensus on the partial wetting of water on ice and several estimates available for the value of the associated macroscopic contact angle, the question of whether these values correspond to the contact angle at mechanical and thermal equilibrium is still open. In the present paper, we address this issue experimentally and demonstrate the existence of such a macroscopic contact angle of water on ice, from measurements and theoretical arguments. Indeed, when depositing water droplets on smooth polycrystalline ice layers with accurately controlled surface temperatures, we observe that spreading is unaffected by thermal effects and phase change close enough to the melting point (namely, for undercoolings below 1 K) so that conditions of thermal equilibrium are closely approached. Whereas the short time motion of the contact line is driven by an inertial-capillary balance, the evolution towards mechanical equilibrium is described by a viscous-capillary dynamics and is therefore capillary – and not thermally – related. Moreover, we show that the resulting contact angle remains constant for undercoolings below 1 K. In this way, we show the existence of a non-zero macroscopic contact angle of water on ice under conditions of mechanical and thermal equilibrium, which is very close to $12^\circ$ . We anticipate this key finding will significantly improve the understanding of capillary flows in the presence of phase change, which is of special interest in the realm of ice morphogenesis and glaciology, and will also be beneficial with the aim of developing numerical methods for resolving triple-line dynamics.- Open Access
The macroscopic contact angle of water on ice
Wettability quantifies the affinity of a liquid over a substrate, and determines whether the surface is repellent or not. When both the liquid and the solid phases are made of the same chemical substance and are at thermal equilibrium, complete wetting is expected in principle, as observed for instance with drops of molten metals spreading on their solid counterparts. However, this is not the case for water on ice. Although there is a growing consensus on the partial wetting of water on ice and several estimates available for the value of the associated contact angle, the question of whether these values correspond to the equilibrium angle or not is still open. In the present paper, we address this issue experimentally and demonstrate the existence of a small, non-vanishing equilibrium contact angle of water on ice whose value is close to 12°. Indeed, when depositing water droplets on ice layers with accurately controlled surface temperatures, we evidence that droplet spreading is unaffected by thermal effects and phase change close enough to the melting point, where the liquid film relaxes to a stable sessile drop shape. Whereas the short time dynamics is driven by an inertial-capillary balance, the evolution towards equilibrium is described by a Cox-Voinov dynamics and is therefore capillary -and not thermally -related. This way, we show that the measured macroscopic contact angle at the end of the spreading process is indeed an equilibrium one, and that it remains constant for undercoolings below 1 K. We anticipate this key finding to significantly improve the understanding of capillary flows in the presence of phase change, which is especially useful in the context of ice morphogenesis and of glaciology, but also in the aim of developing numerical methods for resolving triple-line dynamics.
Open AccessThe macroscopic contact angle of water on ice
Wettability quantifies the affinity of a liquid over a substrate, and determines whether the surface is repellent or not. When both the liquid and the solid phases are made of the same chemical substance and are at thermal equilibrium, complete wetting is expected in principle, as observed for instance with drops of molten metals spreading on their solid counterparts. However, this is not the case for water on ice. Although there is a growing consensus on the partial wetting of water on ice and several estimates available for the value of the associated contact angle, the question of whether these values correspond to the equilibrium angle or not is still open. In the present paper, we address this issue experimentally and demonstrate the existence of a small, non-vanishing equilibrium contact angle of water on ice whose value is close to 12°. Indeed, when depositing water droplets on ice layers with accurately controlled surface temperatures, we evidence that droplet spreading is unaffected by thermal effects and phase change close enough to the melting point, where the liquid film relaxes to a stable sessile drop shape. Whereas the short time dynamics is driven by an inertial-capillary balance, the evolution towards equilibrium is described by a Cox-Voinov dynamics and is therefore capillary -and not thermally -related. This way, we show that the measured macroscopic contact angle at the end of the spreading process is indeed an equilibrium one, and that it remains constant for undercoolings below 1 K. We anticipate this key finding to significantly improve the understanding of capillary flows in the presence of phase change, which is especially useful in the context of ice morphogenesis and of glaciology, but also in the aim of developing numerical methods for resolving triple-line dynamics.
- 10 April 2025
- Published by Springer Nature in Experiments in Fluids
- Vol. 66 (5) , 1-17
Free surface topography of capillary flows using spatiotemporal phase shifting profilometry
- 10 April 2025
- Published by Springer Nature in Experiments in Fluids
- Vol. 66 (5) , 1-17
Free surface topography of capillary flows using spatiotemporal phase shifting profilometry
- 3 April 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1008
Nascent water waves induced by the impulsive motion of a solid wall
The description of the generation mechanism of impulse surface waves remains an important challenge in environmental fluid mechanics, owing to the need for a better understanding of large-scale phenomena such as landslide-generated tsunamis. In the present study, we investigated the generation phase of laboratory-scale water waves induced by the impulsive motion of a rigid piston, whose maximum velocity $U$ and total stroke $L$ are independently varied, as well as the initial liquid depth $h$ . By doing so, the influence of two dimensionless numbers is studied: the Froude number $\mathrm {Fr}_p$ = $U/(gh)^{1/2}$ , with $g$ the gravitational acceleration, and the relative stroke $\Lambda _p =L/h$ of the piston. During the constant acceleration phase of the vertical wall, a transient water bump forms and remains localised in the vicinity of the piston, for all investigated parameters. Experiments with a small relative acceleration $\gamma /g$ , where $\gamma =U^2/L$ , are well captured by a first-order potential flow theory established by Joo et al. (1990), which provides a fair estimate of the overall free surface elevation and the maximum wave amplitude reached at the contact with the piston. For large Froude numbers, however, wave breaking hinders the use of such an approach. In this case, an unsteady hydraulic jump theory is proposed, which accurately predicts the time evolution of the wave amplitude at the contact with the piston throughout the generation phase. At the end of the formation process, the dimensionless volume of the bump evolves linearly with $\Lambda _p$ and the wave aspect ratio is found to be governed, at first-order, by the relative acceleration $\gamma /g$ . As the piston begins its constant deceleration, the water bump evolves into a propagating wave and several regimes such as dispersive, solitary-like and bore waves, as well as water jets are then reported and mapped in a phase diagram in the ( $\mathrm {Fr}_p$ , $\Lambda _p$ ) plane. While the transition from waves to water jets is observed if the typical acceleration of the piston is close enough to the gravitational acceleration $g$ , the wave regimes are found to be mainly selected by the relative piston stroke $\Lambda _p$ . On the other hand, the Froude number determines whether the generated wave breaks or not.- 3 April 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1008
Nascent water waves induced by the impulsive motion of a solid wall
The description of the generation mechanism of impulse surface waves remains an important challenge in environmental fluid mechanics, owing to the need for a better understanding of large-scale phenomena such as landslide-generated tsunamis. In the present study, we investigated the generation phase of laboratory-scale water waves induced by the impulsive motion of a rigid piston, whose maximum velocity $U$ and total stroke $L$ are independently varied, as well as the initial liquid depth $h$ . By doing so, the influence of two dimensionless numbers is studied: the Froude number $\mathrm {Fr}_p$ = $U/(gh)^{1/2}$ , with $g$ the gravitational acceleration, and the relative stroke $\Lambda _p =L/h$ of the piston. During the constant acceleration phase of the vertical wall, a transient water bump forms and remains localised in the vicinity of the piston, for all investigated parameters. Experiments with a small relative acceleration $\gamma /g$ , where $\gamma =U^2/L$ , are well captured by a first-order potential flow theory established by Joo et al. (1990), which provides a fair estimate of the overall free surface elevation and the maximum wave amplitude reached at the contact with the piston. For large Froude numbers, however, wave breaking hinders the use of such an approach. In this case, an unsteady hydraulic jump theory is proposed, which accurately predicts the time evolution of the wave amplitude at the contact with the piston throughout the generation phase. At the end of the formation process, the dimensionless volume of the bump evolves linearly with $\Lambda _p$ and the wave aspect ratio is found to be governed, at first-order, by the relative acceleration $\gamma /g$ . As the piston begins its constant deceleration, the water bump evolves into a propagating wave and several regimes such as dispersive, solitary-like and bore waves, as well as water jets are then reported and mapped in a phase diagram in the ( $\mathrm {Fr}_p$ , $\Lambda _p$ ) plane. While the transition from waves to water jets is observed if the typical acceleration of the piston is close enough to the gravitational acceleration $g$ , the wave regimes are found to be mainly selected by the relative piston stroke $\Lambda _p$ . On the other hand, the Froude number determines whether the generated wave breaks or not.- Open Access
Free surface topography of capillary flows using spatiotemporal phase shifting profilometry
We present a novel experimental technique to characterize the free surface of capillary flows adapted from the Spatio-Temporal Phase Shifting Profilometry (ST-PSP) method introduced by Ri et al. (Journal of Optics, 2019) for solid bodies. The present study is focused on various regimes of capillary flows over inclined surfaces, including drops, rivulets, meanders, and braided films. A calibration process is carried out using a solid wedge to determine the optical distances required for the phase-to-height relationship. The optimal dye concentration necessary for accurately reconstructing the free surface of a dyed water flow is explored. The ST-PSP method is then applied to profile different liquid flows and objects, achieving large signal-to-noise ratios across all experiments. Notably, the analysis of a sessile droplet shows a promising correlation between the ST-PSP results and side-view visualizations, as evidenced by the accurate recovery of its apparent contact angle. Furthermore, free surface reconstructions of rivulet flows exhibit good agreement with the theoretical predictions of Duffy and Moffatt (The Chemical Engineering Journal and the Biochemical Engineering Journal, 1995). These results suggest that the ST-PSP method is highly effective for obtaining accurate height maps of capillary flows and objects, making it a valuable tool for validating theoretical models in the future.
Open AccessFree surface topography of capillary flows using spatiotemporal phase shifting profilometry
We present a novel experimental technique to characterize the free surface of capillary flows adapted from the Spatio-Temporal Phase Shifting Profilometry (ST-PSP) method introduced by Ri et al. (Journal of Optics, 2019) for solid bodies. The present study is focused on various regimes of capillary flows over inclined surfaces, including drops, rivulets, meanders, and braided films. A calibration process is carried out using a solid wedge to determine the optical distances required for the phase-to-height relationship. The optimal dye concentration necessary for accurately reconstructing the free surface of a dyed water flow is explored. The ST-PSP method is then applied to profile different liquid flows and objects, achieving large signal-to-noise ratios across all experiments. Notably, the analysis of a sessile droplet shows a promising correlation between the ST-PSP results and side-view visualizations, as evidenced by the accurate recovery of its apparent contact angle. Furthermore, free surface reconstructions of rivulet flows exhibit good agreement with the theoretical predictions of Duffy and Moffatt (The Chemical Engineering Journal and the Biochemical Engineering Journal, 1995). These results suggest that the ST-PSP method is highly effective for obtaining accurate height maps of capillary flows and objects, making it a valuable tool for validating theoretical models in the future.
- Open Access
Nascent water waves induced by the impulsive motion of a solid wall
In the present study, we investigated the generation phase of laboratory-scale water waves induced by the impulsive motion of a rigid piston, whose maximum velocity $U$ and total stroke $L$ are independently varied, as well as the initial liquid depth $h$. By doing so, the influence of two dimensionless numbers is studied: the Froude number $\mathrm{Fr}_p=U/(gh)^{1/2}$, with $g$ the gravitational acceleration, and the relative stroke $Λ_p =L/h$ of the piston. During the constant acceleration phase of the vertical wall, a transient water bump forms and remains localised in the vicinity of the piston, for all investigated parameters. Experiments with a small relative acceleration $γ/g$, where $γ=U^2/L$, are well captured by a first-order potential flow theory established by \citet{1990_joo}, which provides a fair estimate of the overall free surface elevation and the maximum wave amplitude reached at the contact with the piston. For large Froude numbers, an unsteady hydraulic jump theory is proposed, which accurately predicts the time evolution of the wave amplitude at the contact with the piston throughout the generation phase. At the end of the formation process, the dimensionless volume of the bump evolves linearly with $Λ_p$ and the wave aspect ratio is found to be governed by the relative acceleration $γ/g$. As the piston begins its constant deceleration, the water bump evolves into a propagating wave and several regimes are then reported and mapped in a phase diagram in the ($\mathrm{Fr}_p$, $Λ_p$) plane. While the transition from waves to water jets is observed if the typical acceleration of the piston is close enough to the gravitational acceleration $g$, the wave regimes are found to be mainly selected by the relative piston stroke $Λ_p$ while the Froude number determines whether the generated wave breaks or not.Open AccessNascent water waves induced by the impulsive motion of a solid wall
In the present study, we investigated the generation phase of laboratory-scale water waves induced by the impulsive motion of a rigid piston, whose maximum velocity $U$ and total stroke $L$ are independently varied, as well as the initial liquid depth $h$. By doing so, the influence of two dimensionless numbers is studied: the Froude number $\mathrm{Fr}_p=U/(gh)^{1/2}$, with $g$ the gravitational acceleration, and the relative stroke $Λ_p =L/h$ of the piston. During the constant acceleration phase of the vertical wall, a transient water bump forms and remains localised in the vicinity of the piston, for all investigated parameters. Experiments with a small relative acceleration $γ/g$, where $γ=U^2/L$, are well captured by a first-order potential flow theory established by \citet{1990_joo}, which provides a fair estimate of the overall free surface elevation and the maximum wave amplitude reached at the contact with the piston. For large Froude numbers, an unsteady hydraulic jump theory is proposed, which accurately predicts the time evolution of the wave amplitude at the contact with the piston throughout the generation phase. At the end of the formation process, the dimensionless volume of the bump evolves linearly with $Λ_p$ and the wave aspect ratio is found to be governed by the relative acceleration $γ/g$. As the piston begins its constant deceleration, the water bump evolves into a propagating wave and several regimes are then reported and mapped in a phase diagram in the ($\mathrm{Fr}_p$, $Λ_p$) plane. While the transition from waves to water jets is observed if the typical acceleration of the piston is close enough to the gravitational acceleration $g$, the wave regimes are found to be mainly selected by the relative piston stroke $Λ_p$ while the Froude number determines whether the generated wave breaks or not. - Open Access
- 3 October 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 996, A14
Role of melting and solidification in the spreading of an impacting water drop
The present study reports experiments of water droplets impacting on ice or on a cold metal substrate, with the aim of understanding the effects of liquid solidification or substrate melting on the impingement process. Both liquid and substrate temperatures are varied, as well as the height of fall of the droplet. The dimensionless maximum spreading diameter, $\beta _m$ , is found to increase with both temperatures as well as with the impact velocity. Here $\beta _m$ is reduced when liquid solidification, which enhances dissipation, is present, whereas fusion, i.e. substrate melting, favours the spreading of the impacting droplet. These observations are rationalized by extending an existing model of effective viscosity, in which phase change alters the size and shape of the developing viscous boundary layer, thereby modifying the value of $\beta _m$ . The use of this correction allows us to adapt a scaling recently developed in the context of isothermal drop impacts to propose a law giving the maximum diameter of an impacting water droplet in the presence of melting or solidification. Finally, additional experiments of dimethyl sulfoxide drop impacts onto a cold brass substrate have been performed and are also captured by the proposed modelling, generalizing our results to other fluids.- 3 October 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 996, A14
Open AccessRole of melting and solidification in the spreading of an impacting water drop
The present study reports experiments of water droplets impacting on ice or on a cold metal substrate, with the aim of understanding the effects of liquid solidification or substrate melting on the impingement process. Both liquid and substrate temperatures are varied, as well as the height of fall of the droplet. The dimensionless maximum spreading diameter, $\beta _m$ , is found to increase with both temperatures as well as with the impact velocity. Here $\beta _m$ is reduced when liquid solidification, which enhances dissipation, is present, whereas fusion, i.e. substrate melting, favours the spreading of the impacting droplet. These observations are rationalized by extending an existing model of effective viscosity, in which phase change alters the size and shape of the developing viscous boundary layer, thereby modifying the value of $\beta _m$ . The use of this correction allows us to adapt a scaling recently developed in the context of isothermal drop impacts to propose a law giving the maximum diameter of an impacting water droplet in the presence of melting or solidification. Finally, additional experiments of dimethyl sulfoxide drop impacts onto a cold brass substrate have been performed and are also captured by the proposed modelling, generalizing our results to other fluids. - 15 July 2024
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 9 (7) , 074301
Effects of interparticle cohesion on the collapse of granular columns
The presence of interparticle cohesion can drastically change the behavior of granular materials. For instance, powders are challenging to handle, and one can make a sandcastle using wet grains. In this study, we report experimental results for columns of model cohesive grains collapsing under their own weight in air and spreading on a rough horizontal surface. The effects of two different sources of interparticle cohesion on two collapse geometries are compared and characterized in a common framework. Grains are made cohesive by adding a small amount of water, such that they are in the pendular state, or by applying a polymer coating. The effects of cohesion are reported for a cylindrical column that spreads unconfined axisymmetrically and a confined rectangular column that flows in a single direction. A dimensionless number, comparing macroscopic cohesive strength to particle weight, is shown to capture the effects of cohesion on the final morphology. To this end, a characterization of the cohesive strength of the granular materials is obtained, independent of the physical source of cohesion at the particle scale. Such a framework allows for a common description of cohesive granular materials with different sources of cohesion.
- 15 July 2024
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 9 (7) , 074301
Effects of interparticle cohesion on the collapse of granular columns
The presence of interparticle cohesion can drastically change the behavior of granular materials. For instance, powders are challenging to handle, and one can make a sandcastle using wet grains. In this study, we report experimental results for columns of model cohesive grains collapsing under their own weight in air and spreading on a rough horizontal surface. The effects of two different sources of interparticle cohesion on two collapse geometries are compared and characterized in a common framework. Grains are made cohesive by adding a small amount of water, such that they are in the pendular state, or by applying a polymer coating. The effects of cohesion are reported for a cylindrical column that spreads unconfined axisymmetrically and a confined rectangular column that flows in a single direction. A dimensionless number, comparing macroscopic cohesive strength to particle weight, is shown to capture the effects of cohesion on the final morphology. To this end, a characterization of the cohesive strength of the granular materials is obtained, independent of the physical source of cohesion at the particle scale. Such a framework allows for a common description of cohesive granular materials with different sources of cohesion.
- 13 September 2022
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 7 (9) , 094801
From granular collapses to shallow water waves: A predictive model for tsunami generation
In this article, we present a predictive model for the amplitude of impulse waves generated by the collapse of a granular column into a water layer. The model, which combines the spreading dynamics of the grains and the wave hydrodynamics in shallow water, is successfully compared to a large dataset of laboratory experiments, and captures the influence of the initial parameters while giving an accurate prediction. Furthermore, the role played on the wave generation by two key dimensionless numbers, i.e., the global Froude number and the relative volume of the immersed deposit, is rationalized. These results provide a simplified, yet comprehensive, physical description of the generation of tsunami waves engendered by large-scale subaerial landslides, rockfalls, or cliff collapses in a shallow water.
- 13 September 2022
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 7 (9) , 094801
From granular collapses to shallow water waves: A predictive model for tsunami generation
In this article, we present a predictive model for the amplitude of impulse waves generated by the collapse of a granular column into a water layer. The model, which combines the spreading dynamics of the grains and the wave hydrodynamics in shallow water, is successfully compared to a large dataset of laboratory experiments, and captures the influence of the initial parameters while giving an accurate prediction. Furthermore, the role played on the wave generation by two key dimensionless numbers, i.e., the global Froude number and the relative volume of the immersed deposit, is rationalized. These results provide a simplified, yet comprehensive, physical description of the generation of tsunami waves engendered by large-scale subaerial landslides, rockfalls, or cliff collapses in a shallow water.