YPYurii Polievoda

Yurii Polievoda

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yurii Polievoda has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • THE INFLUENCE OF HIGH-FREQUENCY RADIATION ON THE PHYSICAL PROPERTIES OF PRODUCTS (RAW MATERIALS: STRAWBERRIES, APPLES, PEARS)

    by Viktor Hryshchyshyn, Yurii Polievoda

    The purpose of the article is to substantiate approaches to the controlled influence of high-frequency electromagnetic radiation on the physicochemical and structural-mechanical properties of fruit and berry raw materials, taking into account their further integration into drying and vibration-based technological processes. Particular attention is paid to identifying relationships between energy input parameters and changes in the internal structure of the material, which determine its behavior under industrial conditions. The research methodology is based on a combination of computational modeling and a factorial experiment with variation of frequency, power, and exposure time of electromagnetic treatment. Strawberries, apples, and pears were selected as research objects due to their differences in tissue density and moisture content. The evaluation was carried out using a set of indicators, including changes in density, firmness, electrical conductivity, moisture content, and color parameters. The obtained results demonstrate a pronounced relationship between high-frequency processing regimes and the degree of transformation of the physical properties of raw materials. It has been established that increasing power and frequency leads to intensification of heat and mass transfer processes, accompanied by a decrease in density and mechanical strength of the material. Different levels of sensitivity of the studied objects to elect-omagnetic influence have been identified, which necessitates a differentiated approach to the selection of processing regimes. The practical significance of the results lies in the development of technological recommendations for integrating high-frequency radiation into combined drying systems and vibration transport lines. The proposed solutions allow reducing product losses, improving the stability of physical characteristics, and increasing the efficiency of production processes. The scientific novelty of the study consists in a comprehensive approach to assessing the impact of electromagnetic fields on the structure of fruit and berry raw materials, considering their subsequent operation under mechanical loading conditions, which expands the possibilities of applying high-frequency technologies in the food industry.

  • Open Access

    ENERGY ASSESSMENT OF THE DEFORMATION PROCESS OF MINCED MEAT DURING PRODUCT FORMING IN TECHNOLOGICAL EQUIPMENT

    by Viktor Goots, Vitalii Yaropud, Yurii Polievoda, Oleksii Tokarchuk

    The article addresses the issue of determining energy consumption during the deformation of minced meat in food product forming, dosing, and compaction processes. Minced meat is considered as a complex viscoelastic dispersed system characterized by a combination of elastic, viscous, and plastic properties that significantly influence the nature of deformation processes and the energy performance of technological equipment. An analysis of the main factors affecting the deformation work has been carried out, including the internal resistance of the material, friction forces between the product and working surfaces, loading rate, and changes in the structural and mechanical characteristics of minced meat during compaction. A mathematical approach for evaluating the specific deformation work is proposed, taking into account the combined effect of compression work and the work required to overcome friction forces. A viscoelastic model was used to describe the behavior of minced meat, making it possible to consider changes in the rheological properties of the product under loading. A sequence for calculating the energy parameters of the process has been developed, enabling the determination of specific work, power consumption, and the nature of load variation depending on the kinematic parameters of the machine working elements. It has been established that an increase in the degree of compaction is accompanied by a decrease in product porosity, an increase in resistance to deformation, and a rise in specific energy consumption. It is shown that an important task in the design of forming equipment is the determination of the maximum technologically permissible pressure at which further linear deformation of the product practically ceases and additional energy consumption becomes inefficient. The obtained relationships can be used to substantiate rational operating modes of equipment and to select its design parameters.

  • Open Access

    RHEODYNAMIC MODELING OF THE PROCESS OF PERIODIC COMPRESSION OF MINCED MEAT

    by Victor Guts, Yurii Polievoda, Oleksii Tokarchuk

    The article considers the possibility of using rheology methods for mathematical modeling of the mechanical impact of the working bodies of technological equipment on minced meat as a complex viscoelastic dispersed system. The feasibility of using a mechanical model consisting of parallel-connected elastic and viscous elements for an adequate description of the process of periodic compression of minced meat by a cam mechanism is substantiated. This approach makes it possible to take into account the simultaneous manifestation of elastic and viscous properties of the product during its mechanical deformation. A mathematical apparatus is proposed for determining the main kinematic and power parameters of the process, in particular the movement of the working body, the speed of its movement, the deformation stress, work and energy costs for processing minced meat. Special attention is paid to establishing the relationship between the geometric parameters of the cam mechanism, the angular velocity of its rotation and the rheological characteristics of minced meat, in particular its viscosity and elasticity. Taking into account these parameters makes it possible to predict the nature of product deformation and determine rational operating modes of technological equipment. It is shown that matching the frequency and intensity of periodic compression with the rheological properties of minced meat contributes to a more efficient use of mechanical energy, reducing unproductive energy consumption and preventing excessive destruction of the structural bonds of the product. The proposed approach can be used when designing and improving machines for forming, mixing and mechanical processing of minced meat masses, as well as for selecting the optimal design and operating parameters of their working bodies. The obtained provisions create the basis for further experimental research of the rheological properties of minced meat and the development of energy-efficient technological equipment for the production of meat products.

  • Open Access

    JUSTIFICATION OF THE GEOMETRY AND TRIBOTECHNICAL CHARACTERISTICS OF THE WORKING CHAMBER OF PUMPING SYSTEMS

    by Yurii Polievoda, Bogdan Symonik

    The article considers the scientific and applied aspects of substantiating the geometric and tribotechnical parameters of the working chamber of screw pumping systems designed for the transportation and forming of minced meat with different rheological properties. The relevance of the research is driven by the need to improve the energy efficiency of food raw material processing while ensuring the preservation of the structural and mechanical characteristics of the product's protein matrix. The paper analyzes the influence of contact interaction between the minced meat and the surfaces of the screw and the working chamber, in particular the ratio of friction coefficients, on the formation of a stable transport flow. It has been established that the determining factor of efficient pumping is the provision of frictional asymmetry, which prevents the phenomenon of wall slip and ballast rotation of the product. To increase the traction capacity of the chamber, it is proposed to modify its inner surface by forming longitudinal grooves, which promote the transition from external friction “product–metal” to internal shear «product-product». The expediency of using a confuser (conical) geometry in the pre-die zone of the working chamber is substantiated, which ensures a gradual increase in pressure, sealing of the working space, and reduction of backflows of minced meat through the radial clearance. It is proven that the geometric transformation of the channel contributes to the stabilization of the velocity field and the reduction of hydraulic losses. A mathematical model of the process of transporting a viscoelastic medium has been developed. The regularities of the influence of the radial clearance, velocity parameters, and rheological characteristics of the raw material on the intensity of energy dissipation and the thermal regime of the process have been established. It is shown that excessive reduction of the clearance leads to local overheating and degradation of protein structures, while its optimization allows minimizing energy losses. The conducted kinematic analysis made it possible to determine the relationships describing the mode of minced meat transportation, in particular the ratio of velocities and the conditions of flow continuity. Differences in the behavior of minced meat of various rheological groups and their influence on the design parameters of screw systems have been established. The proposed approaches can be used in the design and modernization of food industry equipment.

  • Open Access

    SUBSTANTIATION OF PARAMETERS OF SCREW FEEDERS FOR MINCED MEAT SYSTEMS BASED ON MODELING THE RHEOLOGICAL BEHAVIOR OF MEAT RAW MATERIALS

    by Yurii Polievoda, Bohdan Symonik

    The article examines the feures of minced meat transportation in screw systems, taking into account its viscoelastic properties. It is shown that the process of product movement in the working chamber is determined by the ratio of viscous friction forces between the minced meat, the screw, and the casing walls. Unlike Newtonian fluids, minced meat is characterized by the presence of a yield shear stress and an elastic modulus, which creates a risk of structural mechanical destruction when critical shear rates are exceeded. This leads to a deterioration in product quality, in particular moisture loss and fat separation. The influence of screw and working chamber geometry on the efficiency of minced meat transportation has been analyzed, particularly for group B raw materials, which exhibit increased viscosity and a complex structural organization. It has been established that key factors include the screw diameter, helix angle, channel depth, and the radial clearance between the screw and the casing. Excessive reduction of the clearance causes local overheating, while its increase leads to higher backflow and a loss of productivity. An integral transportation efficiency criterion has been proposed, taking into account the ratio of productivity to the energy consumed to overcome viscous friction. A mathematical model of the process has been developed, based on the superposition of forward and backward flows and accounting for the temperature dependence of minced meat viscosity. It has been shown that energy dissipation leads to product heating, a decrease in viscosity, and a reduction in the overall process efficiency. Based on the construction of a three-dimensional response surface, the rational values of the screw’s geometric parameters were determined. It was established that the maximum efficiency is achieved at a diameter and helix angle that ensure a balance between productivity, energy consumption, and preservation of the minced meat structure. The proposed approach allows a transit from empirical selection to analytical design of screw systems, enhancing the efficiency of processes in the meat processing industry.

  • SYNTHESIS OF THE DIGITAL CONTOUR OF ELECTRICAL ACTUATOR

    by Oleksandr Vozniak, Yurii Polievoda, Serhii Tikhonenko, Artem Kosakovskyi

    The article discusses in detail the issue of building modern digital control systems of electric drives, taking into account the specific impact of temporal sampling on the operation of such systems. The emphasis is on the analysis of the process of transformation of continuous dynamic systems into digital form, since this stage is the key to the transition from classic analog control methods to new digital technologies. An important aspect of the study was to take into account the impact of the selected sampization period, because it directly determines the level of accuracy of signal reproduction, affects the efficiency of the actuator. To describe the behavior of the system, a mathematical model of digital control was created, which is based on the use of impulse transmitting functions and Z-translating apparatus. On the basis of the resulting model, a method of synthesis of a digital regulator was developed, which takes into account the features of a specific control object, technical restrictions on the implementation of algorithms and the need to achieve the given dynamic characteristics. The proposed approach is not limited to theoretical layout, since its effectiveness is confirmed by the results of computer simulation. Studies have shown that the synthesized regulator provides adequacy of the mathematical model and reproduces the desired behavior of the system with high accuracy. The results of the modeling showed that the use of such a technique allows to improve the reliability and quality of operation of modern electric drives, expanding the possibilities of their use in various fields of industry and automated complexes. The results obtained are not only theoretical but also practical, as they open up prospects for further improvement of digital control systems.

  • DEFORMATION OF VISCOELASTIC SYSTEMS IN FOOD TECHNOLOGIES

    by Viktor Goots, Yurii Polievoda, Bohdan Symonik

    The article examines the deformation processes of viscoelastic systems, which are widely used in food technologies as part of transport-technological and packaging equipment. The working components of such systems (stops, guides, stoppers, springs, dampers, friction units, etc.) change their shape and dimensions under external loads, affecting the efficiency of the equipment and energy consumption. Methodological approaches are proposed for calculating the work and energy characteristics of elastic and viscoelastic elements, taking into account their structural and rheological properties. Based on the equations of rheodynamics, the work of elastic forces during compression and tension is analyzed, showing that the work depends on the square of the elongation and is independent of the trajectory or duration of the process. To account for the time-dependent characteristics of deformation, a viscous element – a damper – is introduced into the mechanical models, allowing the description of gradual spring deformation under constant or variable loads. Differential equations for parallel and series connections of elastic and viscous elements are considered, and their solutions and expressions for calculating work, deformation rate, power, and energy expenditure are obtained. Particular attention is given to cases where the deformation forces vary according to a linear or nonlinear law, including exponential, which corresponds to real conditions in packaging processes. Graphical dependencies are presented, illustrating the nature of deformation under different types of loads. The obtained relationships can be used to optimize the energy parameters of technological equipment, improve the reliability and durability of its working components, and enhance the designs of transport-technological and packaging lines.

  • Open Access

    Development and research of W-parameters of potentially unstable four-poles based on the mathematical model of W-parameters of field-effect transistors in the high-frequency range

    by Oleksandr Voznyak, Kateryna Kovalova, Yurii Polievoda, Liudmyla Kolianovska, Svitlana Ovsienko, Alla Solomon

    The models underlying calculations and research provide the developers with information about the behavior of devices during operation. As modern technologies do not provide high accuracy of measurements, the unstructured models are used, in particular, four-poles, which describe electrical circuits through their external characteristics, without taking into account the internal structure. Four-pole parameters, such as conductivities and impedances, can be measured using special methods, which allows effective analysis of the electrical properties of devices and systems.

  • INNOVATIVE APPROACHES TO STORAGE OF PACKAGED FOOD

    by Yurii Polievoda, Viktor Hryshchyshyn

    The article presents innovative approaches to the storage of pre-packaged food products utilizing aseptic packaging technology in large-capacity containers. It provides an analysis of contemporary methods of food preservation and thermal processing, with a focus on the limitations of traditional approaches associated with the degradation of bioactive compounds, structural components, and sensory characteristics. It is established that prolonged storage of food products under thermal treatment conditions, particularly sterilization and pasteurization, fails to preserve the full spectrum of organoleptic properties and nutraceutical value of the products. The study explores the operating principles of aseptic filling lines, which implement stepwise heating, sterilization, and cooling of the product, followed by packaging into hermetically sealed multilayer bags such as bag-in-box and bag-in-drum containers. The research substantiates that aseptic packaging enables long-term storage without the need for refrigeration, significantly reducing energy consumption. Special attention is given to the technological process of sterilizing and packaging food products containing particulates (such as chunks, slices, and cubes) using the OHMISO sterilization module. The preservation of morphological integrity and organoleptic stability of such products is achieved through the optimization of thermal processing parameters, vacuum blanching, and the controlled addition of antioxidants. The economic aspects of implementing aseptic packaging technology are also examined, including reduced logistics costs, elimination of the need for specialized transportation, the potential for container reuse, and enhanced flexibility in seasonal production planning. In conclusion, aseptic packaging technology, when combined with modern sterilization systems, opens new opportunities for the preservation of food products, particularly for concentrated or structured semi-finished goods. The proposed method is positioned as a competitive alternative to freezing, with strong potential for industrial-scale implementation.

  • INCREASING THE EFFICIENCY AND RELIABILITY OF WORKING BODIES OF CRUSHING EQUIPMENT IN THE PROCESSING INDUSTRY

    by Igor Stadnik, Volodymyr Piddubnyi, Vitalii Mihailik, Ivan Zakharuk, Yurii Polievoda

    This study examines the improvement of efficiency and reliability of hammer crushers in the processing industry by applying working surfaces with a discrete structure and relief in the form of an Archimedean spiral. The wear mechanisms of crushing elements were analyzed, and design solutions were proposed to reduce wear intensity and provide a self-sharpening effect. A mathematical model of the interaction between the working elements and raw material was developed, and experimental studies on its comminution were conducted. A model of load variation on a working element with a spiral-shaped edge was proposed, taking into account contact dynamics and blade geometry. The model is based on the principles of deformable solid mechanics and contact theory. Comparative analysis demonstrated that the hammer profile shape significantly influences the interaction with the material. It was found that the use of a profile in the form of an Archimedean spiral improves the dynamic characteristics of the process and reduces energy consumption. Modeling has confirmed that the equilibrium position of the hammer during the rotation of the rotor is a critical condition for effective grinding of grain raw materials. Deviation from this position causes a decrease in productivity, an increase in dynamic loads and accelerated surface wear. The proposed configuration provides a uniform distribution of loads, reduction of contact stresses and increase the durability of the working bodies. The results can be used to modernize crushers to increase their reliability and reduce service costs. In addition, the analysis showed the possibility of optimizing the geometric parameters of the rotor, which reduces the power consumption of the installation and improve the quality of the final product. This creates the basis for further research in the direction of improving the structures of rotary crushers and the introduction of energy efficient technological solutions in the processing industry.