JAJocasta Avila

Jocasta Avila

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jocasta Avila has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Phytoceramide and 6-hydroxyceramide deficiency correlates with barrier function alteration in atopic dermatitis skin

    by Sonia Bouayadi, Eric Arbey, Edouard Raynaud, Jocasta Avila, Géraldine Rolland, Barbara Lynch, Carine Baltenneck, Elodie Rieux, Anne Saussine, Jennifer Bourland, et al.

  • Tailored carbon dioxide capacity in carboxylate-based ionic liquids

    by Nicolas Scaglione, Jocasta Avila, Agilio Padua, Margarida Costa Gomes

    We have used a library of thermally stable tetraalkylphosphonium carboxylate ionic liquids that were easily prepared from available carboxylic acids. Depending on the pKa in water of the precursor acids, the resulting ionic liquids either dissolve or reversibly chemically absorb CO2, with some exhibiting notable gas capacities, reaching a CO2 mole fraction of 0.2 at 1 bar and 343 K. While equilibrium constants and ionic liquid capacities generally correlate with the pKa of the acids, certain exceptions underscore the influence of liquid structure and physical properties of the ionic liquids, elucidated through molecular dynamics simulations and density functional theory calculations. Unlike the trends observed in other CO2-absorbing ILs, phosphonium carboxylates do not experience increased viscosity upon gas absorption; instead, enhanced diffusivities are observed, facilitating efficient gas–liquid transfer.


  • Open Access

    Mixing enthalpies of fluorinated precursors for textile industry in ionic liquids

    by Guillaume Simon, Jocasta Avila, Agilio Padua, Margarida Costa Gomes

    Per- and polyfluoroalkyl substances (PFAS) are widely used for technical purposes in textile finishing, giving water or oil repellence to the fibres. During their production, textile manufacturing or consumer-use, these additives can be degraded into their precursors and released in the environment. These substances are volatile, bio accumulative and persistent, and their release in the environment is more and more regulated in the EU . For a textile recycling purpose, it is necessary to find ways to safely remove them from the fibres. Among other alternative solvents, ionic liquids showed solvation properties that are promising for recycling textile waste. We have used the COSMO-SAC modelling approach to screen a large number of ionic liquids and, by the calculation of infinite dilution activity coefficients, find the most appropriate solvents for two representative fluorinated precursors likely to be found in textile products. We could determine which ionic liquids were able to interact favourably with perfluorobutyric acid (PFBA) and 6:2 fluorotelomer alcohol (6:2 FTOH). These information could be quantified using isothermal titration calorimetry (ITC) for PFBA in 1-butyl-3-metylimidazolium bis(trifluoromethylsulfonyl)imide, [C4C1Im][NTf2], predicted by COSMO-SAC as a weak solvent, as well as in 1-ethyl-3 methylimidazolium methylsulfonate, [C2C1Im][MeSO3] and 1-butyl-3-methylimidazolium acetate, [C4C1Im][OAc], expected to have strong interactions with the textile additive. Mixing enthalpies of 6:2 FTOH were measured in selected ionic liquids, namely triethylammonium methylsulfonate, [N222H][MeSO3], 1-ethyl-3 methylimidazolium methylsulfonate, [C2C1Im][MeSO3] and acetate, [C2C1Im][OAc]. A proton transfer from PFBA to AcO– (and to a lesser extent from 6:2 FTOH to AcO–) was investigated and described with DFT calculations, 1H NMR analysis and FT-IR spectroscopy.

  • Open Access

    Defying decomposition: the curious case of choline chloride

    by Adriaan van Den Bruinhorst, Jocasta Avila, Martin Rosenthal, Ange Pellegrino, Manfred Burghammer, Margarida Costa Gomes

    Chemists aim to meet modern sustainability, health, and safety requirements by replacing conventional solvents with deep eutectic solvents (DESs). Through large melting point depressions, DESs may incorporate renewable solids in task-specific liquids. Yet, DES design is complicated by complex molecular interactions and a lack of comprehensive property databases. Even measuring pure component melting properties can be challenging, due to decomposition before melting. Here we overcame the decomposition of the quintessential DES constituent, choline chloride (ChCl). We measured its enthalpy of fusion (13.8 ± 3.0 kJ ⋅ mol) and melting point (687 ± 9 K) by fast scanning calorimetry combined with micro-XRD and high-speed optical microscopy. Our thermodynamically coherent fusion properties identify ChCl as an ionic plastic crystal and demonstrate negative deviations from ideal mixing for ChCl—contradicting previous assumptions. We hypothesise that the plastic crystal nature of ammonium salts governs their resilience to melting; pure or mixed. We show that DESs based on ionic plastic crystals can profit from (1) a low enthalpy of fusion and (2) favourable mixing. Both depress the melting point and can be altered through ion selection. Ionic plastic crystal-based DESs thus offer a platform for task-specific liquids at a broad range of temperatures and compositions.


  • Alkylphosphonium carboxylate ionic liquids with tuned microscopic structures and properties

    by N. Scaglione, J. Avila, E. Bakis, A. Padua, M. Costa Gomes

    Eleven pure alkylphosphonium carboxylate ionic liquids (ILs) were synthesised following a reliable and accessible route. Tetrabutylphosphonium and tetradecyltrihexylphosphonium cations were associated to a variety of [R–COO]− anions with R varying from shorter to longer linear alkyl chains; smaller to bulkier branched alkyl chains; cyclic saturated aliphatic and aromatic moieties; and one heterocyclic aromatic ring containing nitrogen. A combined experimental and molecular simulation study allowed the full characterization of the physico-chemical properties, the structure and the thermal stability of the synthesized ILs. Although slightly more viscous than their imidazolium counterparts, the viscosities of the prepared salts decrease dramatically with temperature and are comparable to other ILs above 50 °C, a manageable temperature as they are thermally stable up to temperatures above 250 °C, even under an oxidizing atmosphere. The microscopic structure of the phophonium ILs is rich and has been studied both experimentally using SAXS and by molecular dynamics simulation using state of the art polarizable force fields whose parameters were determined when necessary. Unique and surprising anion–anion correlations were found for the tetrazolate-based IL allowing to explain some of the unique physical–chemical properties of this phosphonium salt.


  • Open Access

    Porous ionic liquids: beyond the bounds of free volume in a fluid phase

    by Jocasta Avila, Ryan Clark, Agilio A. H. Pádua, Margarida Costa Gomes

    After reviewing the synthesis, characterization and applications of 150+ porous suspensions, we conclude that type III porous liquids are either suspensions of MOFs in ionic liquids and liquid polymers or of decorated MOFs in molecular solvents.


  • Improved carbon dioxide absorption in double-charged ionic liquids

    by Jocasta Avila, Luiz Fernando Lepre, Kateryna Goloviznina, Lorenzo Guazzelli, Christian Silvio Pomelli, Cinzia Chiappe, Agilio Pádua, Margarida Costa Gomes

    Imidazolium and carboxylate-based, divalent ionic liquids were synthesized, characterized and tested for CO 2 absorption. They can absorb reversibly large quantities of CO 2 with an improved 1 : 1 stoichiometry.


  • Integrated, one-pot carbon capture and utilisation using porous ionic liquids

    by Yujiao Zhou, Jocasta Avila, Nicolas Berthet, Solène Legrand, Catherine C. Santini, Margarida Costa Gomes, Véronique Dufaud

    Porous ionic liquids simultaneously absorb carbon dioxide and catalyse its reaction with epoxides to form cyclic carbonates under mild conditions.


  • High‐Performance Porous Ionic Liquids for Low‐Pressure CO2 Capture**

    by Jocasta Avila, Luiz Fernando Lepre, Catherine C. Santini, Martin Tiano, Sandrine Denis‐Quanquin, Kai Chung Szeto, Agilio A. H. Padua, Margarida Costa Gomes

    Porous ionic liquids are non‐volatile, versatile materials that associate porosity and fluidity. New porous ionic liquids, based on the ZIF‐8 metal–organic framework and on phosphonium acetate or levulinate salts, were prepared and show an increased capacity to absorb carbon dioxide at low pressures. Porous suspensions based on phosphonium levulinate ionic liquid absorb reversibly 103 % more carbon dioxide per mass than pure ZIF‐8 at 1 bar and 303 K. We show how the rational combination of MOFs with ionic liquids can greatly enhance low pressure CO2 absorption, paving the way towards a new generation of high‐performance, readily available liquid materials for effective low pressure carbon capture.


  • High‐Performance Porous Ionic Liquids for Low‐Pressure CO2 Capture**

    by Jocasta Avila, Luiz Fernando Lepre, Catherine C. Santini, Martin Tiano, Sandrine Denis‐Quanquin, Kai Chung Szeto, Agilio A. H. Padua, Margarida Costa Gomes

    Porous ionic liquids are non‐volatile, versatile materials that associate porosity and fluidity. New porous ionic liquids, based on the ZIF‐8 metal–organic framework and on phosphonium acetate or levulinate salts, were prepared and show an increased capacity to absorb carbon dioxide at low pressures. Porous suspensions based on phosphonium levulinate ionic liquid absorb reversibly 103 % more carbon dioxide per mass than pure ZIF‐8 at 1 bar and 303 K. We show how the rational combination of MOFs with ionic liquids can greatly enhance low pressure CO2 absorption, paving the way towards a new generation of high‐performance, readily available liquid materials for effective low pressure carbon capture.