Shu-Shen Lyu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shu-Shen Lyu has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- Dong-Chuan Mo
Sun Yat-sen University
24 shared publications - Kaixuan Chen
School of Materials, Sun Yat-Sen University, Shenzhen 518107, China
10 shared publications - Yao Dai
School of Materials
6 shared publications Zongtao Qu
Sun Yat-sen University
6 shared publicationsJingshen Yan
School of Materials
4 shared publicationsZhi-Yong Luo
School of Chemical Engineering and Technology, Sun Yat-sen University, Guangzhou 510275, China
4 shared publications
Latest Publications
- 10 September 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (37) , 16776-16785
3D ZnF2–Sn Composite Anode for Ultra-Long-Life Aqueous Zinc-Ion Batteries
Aqueous zinc-ion batteries hold great promise for large-scale energy storage due to the natural abundance and intrinsic safety of zinc. However, practical application is hindered by uncontrollable dendrite growth and the hydrogen evolution reaction (HER) on the zinc metal anode. Here, we fabricate a three-dimensional (3D) ZnF2–Sn composite zinc metal anode via a one-step method. The outer ZnF2 layer and inner Sn layer synergistically suppress HER and regulate zinc deposition, effectively mitigating dendrite formation. The 3D architecture further accommodates volume variations during long-term cycling, alleviating structural degradation. Consequently, a symmetric cell achieves a cycling life exceeding 2000 h, and an asymmetric cell with a Cu current collector maintains a high Coulombic efficiency over 2000 cycles. More importantly, a Zn–I2 full cell delivers a capacity retention of 94% after 5000 cycles at 1 A g–1. This work provides a rational design strategy for high-performance, long-life zinc metal anodes in aqueous zinc-ion batteries.
- 10 September 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (37) , 16776-16785
3D ZnF2–Sn Composite Anode for Ultra-Long-Life Aqueous Zinc-Ion Batteries
Aqueous zinc-ion batteries hold great promise for large-scale energy storage due to the natural abundance and intrinsic safety of zinc. However, practical application is hindered by uncontrollable dendrite growth and the hydrogen evolution reaction (HER) on the zinc metal anode. Here, we fabricate a three-dimensional (3D) ZnF2–Sn composite zinc metal anode via a one-step method. The outer ZnF2 layer and inner Sn layer synergistically suppress HER and regulate zinc deposition, effectively mitigating dendrite formation. The 3D architecture further accommodates volume variations during long-term cycling, alleviating structural degradation. Consequently, a symmetric cell achieves a cycling life exceeding 2000 h, and an asymmetric cell with a Cu current collector maintains a high Coulombic efficiency over 2000 cycles. More importantly, a Zn–I2 full cell delivers a capacity retention of 94% after 5000 cycles at 1 A g–1. This work provides a rational design strategy for high-performance, long-life zinc metal anodes in aqueous zinc-ion batteries.
- 10 August 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (33) , 23943-23954
Imbibition Theory and Design for Multiscale Micropillar Random Arrays
Efficient liquid transport in micrometer-scale confined spaces is crucial for phase-change thermal management systems, like heat pipes (HPs). While multiscale micropillar random arrays (MMRAs) demonstrate enhanced imbibition performance, their structural randomness has hindered the development of a concise predictive theory. The imbibition dynamics of MMRAs can be effectively modeled using an equivalent square micropillar array approach, where liquid transport is primarily governed by the continuous interpillar spacing. Representative MMRAs, copper forest arrays (CFAs), were fabricated via electrodeposition with gradient current density. Key parameters, average porosity (ε), total covered area fraction (ϕ), and effective pillar radius (re), were characterized. A predictive model linking the ratio of permeability K to effective capillary radius Rc (i.e., K/Rc) to these microstructural parameters was developed and validated with imbibition experiments. The parameters ε, ϕ, and re are the dominant factors controlling K/Rc. High K/Rc was achieved in CFAs by synergistically enhancing ε and re at low ϕ. The model enables direct K/Rc prediction from structural parameters without imbibition experiments. Furthermore, a generalized dimensionless resistance coefficient (Cf) is introduced, quantifying the fundamental Rc–K trade-off in porous media and extending the theory’s utility to the design of advanced materials for thermal management.
- 10 August 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (33) , 23943-23954
Imbibition Theory and Design for Multiscale Micropillar Random Arrays
Efficient liquid transport in micrometer-scale confined spaces is crucial for phase-change thermal management systems, like heat pipes (HPs). While multiscale micropillar random arrays (MMRAs) demonstrate enhanced imbibition performance, their structural randomness has hindered the development of a concise predictive theory. The imbibition dynamics of MMRAs can be effectively modeled using an equivalent square micropillar array approach, where liquid transport is primarily governed by the continuous interpillar spacing. Representative MMRAs, copper forest arrays (CFAs), were fabricated via electrodeposition with gradient current density. Key parameters, average porosity (ε), total covered area fraction (ϕ), and effective pillar radius (re), were characterized. A predictive model linking the ratio of permeability K to effective capillary radius Rc (i.e., K/Rc) to these microstructural parameters was developed and validated with imbibition experiments. The parameters ε, ϕ, and re are the dominant factors controlling K/Rc. High K/Rc was achieved in CFAs by synergistically enhancing ε and re at low ϕ. The model enables direct K/Rc prediction from structural parameters without imbibition experiments. Furthermore, a generalized dimensionless resistance coefficient (Cf) is introduced, quantifying the fundamental Rc–K trade-off in porous media and extending the theory’s utility to the design of advanced materials for thermal management.
- 14 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (21) , 7447-7453
Stacking-Dependent Topological Properties in Two-Dimensional T-RuO 2 and Their Response to External Electric Field
- 14 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (21) , 7447-7453
Stacking-Dependent Topological Properties in Two-Dimensional T-RuO 2 and Their Response to External Electric Field
- 9 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (6) , 9963-9973
Hexagonal Porous Zincophilic Alloy Interface for Ultrastable Zinc Metal Anode
The cycling stability of zinc metal anodes (ZMAs) is often hindered by issues including uncontrolled dendritic growth, nonuniform electric field distribution, and parasitic hydrogen evolution reaction (HER). Herein, we report a zinc anode protected by a zinc-tin (ZnSn) alloy layer with a hexagonal porous structure, fabricated via a simple electrochemical etching process in sodium citrate electrolyte followed by an elemental substitution treatment in stannous chloride solution (denoted as SC@ZnSn). This modified anode exhibits an enhanced electrochemical activity and superior corrosion resistance. When paired in an asymmetric cell configuration, the SC@ZnSn anode delivers remarkable cycling stability, maintaining an average Coulombic efficiency of 99.6% over 1800 cycles. Experimental investigations reveal that the hexagonal porous framework provides abundant Zn2+ adsorption sites and promotes uniform ion flux while the zincophilic ZnSn alloy surface effectively lowers the nucleation barrier. These synergistic effects jointly suppress dendrite growth and ensure excellent long-term reversibility. Furthermore, the SC@ZnSn||I2 full cell demonstrates outstanding durability, achieving stable operation for over 4000 cycles at 1 A g-1 while maintaining high capacity retention.
- 9 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (6) , 9963-9973
Hexagonal Porous Zincophilic Alloy Interface for Ultrastable Zinc Metal Anode
The cycling stability of zinc metal anodes (ZMAs) is often hindered by issues including uncontrolled dendritic growth, nonuniform electric field distribution, and parasitic hydrogen evolution reaction (HER). Herein, we report a zinc anode protected by a zinc-tin (ZnSn) alloy layer with a hexagonal porous structure, fabricated via a simple electrochemical etching process in sodium citrate electrolyte followed by an elemental substitution treatment in stannous chloride solution (denoted as SC@ZnSn). This modified anode exhibits an enhanced electrochemical activity and superior corrosion resistance. When paired in an asymmetric cell configuration, the SC@ZnSn anode delivers remarkable cycling stability, maintaining an average Coulombic efficiency of 99.6% over 1800 cycles. Experimental investigations reveal that the hexagonal porous framework provides abundant Zn2+ adsorption sites and promotes uniform ion flux while the zincophilic ZnSn alloy surface effectively lowers the nucleation barrier. These synergistic effects jointly suppress dendrite growth and ensure excellent long-term reversibility. Furthermore, the SC@ZnSn||I2 full cell demonstrates outstanding durability, achieving stable operation for over 4000 cycles at 1 A g-1 while maintaining high capacity retention.
- 20 January 2026
- Published by American Chemical Society (ACS) in Nano Letters
Additively Manufactured Micro-/Multi-Scale Porous Copper: Enhanced Mass Transport for High-Performance Hydrogen Evolution
The hydrogen evolution reaction (HER) is pivotal for green hydrogen production, yet its kinetics are often limited by mass transport constraints. To address this, we fabricated a hierarchically porous copper substrate via additive manufacturing and electrodeposited a nickel layer to create the Ni@Cu-2.0 electrode. This electrode exhibits outstanding HER performance, requiring an overpotential of only 123 mV to achieve 10 mA cm-2 and demonstrating excellent stability over 50 h. Characterization reveals superaerophobicity (gas contact angle ≈ 180°) and superhydrophilicity (liquid contact angle ≈ 0°), which synergistically facilitate rapid bubble release and efficient electrolyte replenishment. The multiporous architecture is identified as the key factor enabling superior mass transport and performance. This work provides a novel design paradigm for high-performance electrodes in gas-evolving electrocatalysis.
- 20 January 2026
- Published by American Chemical Society (ACS) in Nano Letters
Additively Manufactured Micro-/Multi-Scale Porous Copper: Enhanced Mass Transport for High-Performance Hydrogen Evolution
The hydrogen evolution reaction (HER) is pivotal for green hydrogen production, yet its kinetics are often limited by mass transport constraints. To address this, we fabricated a hierarchically porous copper substrate via additive manufacturing and electrodeposited a nickel layer to create the Ni@Cu-2.0 electrode. This electrode exhibits outstanding HER performance, requiring an overpotential of only 123 mV to achieve 10 mA cm-2 and demonstrating excellent stability over 50 h. Characterization reveals superaerophobicity (gas contact angle ≈ 180°) and superhydrophilicity (liquid contact angle ≈ 0°), which synergistically facilitate rapid bubble release and efficient electrolyte replenishment. The multiporous architecture is identified as the key factor enabling superior mass transport and performance. This work provides a novel design paradigm for high-performance electrodes in gas-evolving electrocatalysis.
- 24 September 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (39) , 34998-35014
Competitive Additive-Strategy Modulating Superaerophobic/Superhydrophilic Porous Copper for Enhanced Liquid Replenishment and Gas Evolution
Enhancing mass transfer (liquid replenishment and gas escape) is critical for improving gas-evolution reactions (GERs) in energy conversion, yet a unified mass transfer enhancement mechanism for both chemical (e.g., hydrogen evolution reaction, HER) and physical (e.g., boiling heat transfer, BHT) remains elusive. This study employs a competitive electroreduction additive strategy to fabricate porous copper, simultaneously utilized in HER and BHT. By regulating hydrogen evolution and copper deposition, the method achieves precise pore-structure control and links microstructure, properties (wettability, superaerophobicity, etc.), and performance. In the electrocatalytic HER, compared to smooth copper, the aerophobic surface of Cu0.4H1.0 reduces the overpotential by 178 mV at 10 mA/cm2, while the enhanced wettability kinetically facilitates the Volmer step, synergistically improving catalytic efficiency. In contrast, during BHT, the aerophobic property of Cu0.4H2.0 reduces wall superheat by 6.5 K (around 28 kW/m2) and 14.6 K (around 1000 kW/m2) compared to smooth copper, whereas the superior wettability under high heat flux conditions effectively mitigates heat transfer deterioration. This study not only provides insights into the synergistic application of porous copper materials in both chemical and physical gas-evolution reactions but also offers theoretical guidance and experimental evidence for the design and development of high-efficiency energy conversion materials.
- 24 September 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (39) , 34998-35014
Competitive Additive-Strategy Modulating Superaerophobic/Superhydrophilic Porous Copper for Enhanced Liquid Replenishment and Gas Evolution
Enhancing mass transfer (liquid replenishment and gas escape) is critical for improving gas-evolution reactions (GERs) in energy conversion, yet a unified mass transfer enhancement mechanism for both chemical (e.g., hydrogen evolution reaction, HER) and physical (e.g., boiling heat transfer, BHT) remains elusive. This study employs a competitive electroreduction additive strategy to fabricate porous copper, simultaneously utilized in HER and BHT. By regulating hydrogen evolution and copper deposition, the method achieves precise pore-structure control and links microstructure, properties (wettability, superaerophobicity, etc.), and performance. In the electrocatalytic HER, compared to smooth copper, the aerophobic surface of Cu0.4H1.0 reduces the overpotential by 178 mV at 10 mA/cm2, while the enhanced wettability kinetically facilitates the Volmer step, synergistically improving catalytic efficiency. In contrast, during BHT, the aerophobic property of Cu0.4H2.0 reduces wall superheat by 6.5 K (around 28 kW/m2) and 14.6 K (around 1000 kW/m2) compared to smooth copper, whereas the superior wettability under high heat flux conditions effectively mitigates heat transfer deterioration. This study not only provides insights into the synergistic application of porous copper materials in both chemical and physical gas-evolution reactions but also offers theoretical guidance and experimental evidence for the design and development of high-efficiency energy conversion materials.
- 19 September 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (40) , 21400-21405
Substrate effect on the electronic band structure and topological properties in a monolayer V 2 O 3 magnetic topological insulator
Monolayer V 2 O 3 hosts a quantum anomalous Hall (QAH) state. Substrate engineering reveals that nonmagnetic h-BN preserves the QAH phase, while ferromagnetic substrates disrupt it, guiding the design of dissipationless topological electronics.
- 19 September 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (40) , 21400-21405
Substrate effect on the electronic band structure and topological properties in a monolayer V 2 O 3 magnetic topological insulator
Monolayer V 2 O 3 hosts a quantum anomalous Hall (QAH) state. Substrate engineering reveals that nonmagnetic h-BN preserves the QAH phase, while ferromagnetic substrates disrupt it, guiding the design of dissipationless topological electronics.
- Open Access
Vortex-Induced Turbulence Optimized Membrane Enthalpy Exchanger: Dynamic Humidity Modulation and Coupled Heat–Mass Transfer Enhancement
A bioinspired vortex-inducing architecture was engineered within the hydrodynamic focusing region of membrane-based enthalpy exchangers (MEEs) to generate controlled Kármán vortex shedding, strategically enhancing thermal–hygric coupling through boundary layer modulation. Computational simulations employing ANSYS Fluent 2024R1 and grid-convergence validation (GCI < 1.8%) demonstrated that at Re = 392 (2.57 m/s flow velocity), the vortex-integrated configuration achieved temperature exchange efficiency enhancements of 3.91% (summer) and 3.58% (winter), latent efficiency gains of 3.71% and 3.53%, alongside enthalpy effectiveness improvements of 3.37% and 3.36%, respectively. The interconnected momentum–heat–mass analogies culminated in peaks of performance evaluation criterion (PEC) = 1.33 (heat transfer) and 1.22 (mass transfer), substantiating vortex-induced Reynolds analogy optimization under typical HVAC operational scenarios (summer: 27 °C/50.3% RH; winter: 21 °C/39.7% RH).
Open AccessVortex-Induced Turbulence Optimized Membrane Enthalpy Exchanger: Dynamic Humidity Modulation and Coupled Heat–Mass Transfer Enhancement
A bioinspired vortex-inducing architecture was engineered within the hydrodynamic focusing region of membrane-based enthalpy exchangers (MEEs) to generate controlled Kármán vortex shedding, strategically enhancing thermal–hygric coupling through boundary layer modulation. Computational simulations employing ANSYS Fluent 2024R1 and grid-convergence validation (GCI < 1.8%) demonstrated that at Re = 392 (2.57 m/s flow velocity), the vortex-integrated configuration achieved temperature exchange efficiency enhancements of 3.91% (summer) and 3.58% (winter), latent efficiency gains of 3.71% and 3.53%, alongside enthalpy effectiveness improvements of 3.37% and 3.36%, respectively. The interconnected momentum–heat–mass analogies culminated in peaks of performance evaluation criterion (PEC) = 1.33 (heat transfer) and 1.22 (mass transfer), substantiating vortex-induced Reynolds analogy optimization under typical HVAC operational scenarios (summer: 27 °C/50.3% RH; winter: 21 °C/39.7% RH).