Zhiyuan Xiang
Zhiyuan Xiang has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Zhe Shen
School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Nanjing, China
3 shared publications - Baifu Zhang
Nanjing University of Science and Technology
2 shared publications - Fei Wu
College of Optical Science and Engineering, Zhejiang University, Hangzhou 310027, China
2 shared publications - Huihui Li
Beijing LLVision Technology Co., Ltd., Beijing 100176, China
2 shared publications - Mengguang Wang
College of Optical Science and Engineering, Zhejiang University, Hangzhou 310027, China
2 shared publications - Yong Li
College of Optical Science and Engineering, Zhejiang University, Hangzhou 310027, China
2 shared publications
Latest Publications
- Open Access
- 30 September 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (19) , 1493
Single-Layer Full-Color Waveguide Display Based on a Broadband Efficient Meta-Grating
Augmented reality (AR) displays are pivotal for delivering immersive experiences in the metaverse, thus driving significant research interest. Current AR systems, predominantly relying on diffraction principles, often suffer from low efficiency and face challenges in realizing monolithic full-color operation. Herein, we propose an AR system that integrates a broadband and highly efficient meta-grating in-coupler and an elliptical meta-grating out-coupler onto a single thin glass substrate. The meta-gratings, with unique nanostructures, enable coupling efficiency exceeding 60% for red (R), green (G), and blue (B) wavelengths across the entire field of view (FOV). Image-bearing light is first coupled into a single-layer optical waveguide via the meta-grating, then undergoes two-dimensional expansion through the elliptical meta-grating, and is ultimately coupled into the human eye to form a large AR FOV. Experimentally, we fabricated an optical waveguide prototype and validated the system’s high efficiency and color-enhanced imaging capabilities. This work advances the development of monolithic, trichromatic, highly efficient, and large FOV AR displays based on meta-grating technology.
- 30 September 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (19) , 1493
Open AccessSingle-Layer Full-Color Waveguide Display Based on a Broadband Efficient Meta-Grating
Augmented reality (AR) displays are pivotal for delivering immersive experiences in the metaverse, thus driving significant research interest. Current AR systems, predominantly relying on diffraction principles, often suffer from low efficiency and face challenges in realizing monolithic full-color operation. Herein, we propose an AR system that integrates a broadband and highly efficient meta-grating in-coupler and an elliptical meta-grating out-coupler onto a single thin glass substrate. The meta-gratings, with unique nanostructures, enable coupling efficiency exceeding 60% for red (R), green (G), and blue (B) wavelengths across the entire field of view (FOV). Image-bearing light is first coupled into a single-layer optical waveguide via the meta-grating, then undergoes two-dimensional expansion through the elliptical meta-grating, and is ultimately coupled into the human eye to form a large AR FOV. Experimentally, we fabricated an optical waveguide prototype and validated the system’s high efficiency and color-enhanced imaging capabilities. This work advances the development of monolithic, trichromatic, highly efficient, and large FOV AR displays based on meta-grating technology.
- Open Access
Single-Layer Full-Color SiC Diffractive Waveguide AR Glasses with Large FOV and Rainbow Effect Suppression
Augmented reality (AR) technology blends digital content with the real world to create immersive experiences. Diffractive waveguides, a key AR component, are popular because they balance weight, size, image quality, and ease of production. However, traditional glass-based waveguides have drawbacks like narrow viewing angles, blurry images, and rainbow-like distortions. To solve these issues, we developed ultra-thin, lightweight AR glasses using silicon carbide (SiC) and a new design method called the Period-Limited theory (PL theory). Our simulations show that the system works efficiently across red, green, and blue colors, removing rainbow distortions while keeping images clear and vibrant. Tests confirm that the design eliminates rainbow effects, provides a wide 55° field of view (FOV), and keeps each lens extremely light (just 2.12 g). This work offers a practical way to make compact, high-performance AR glasses with excellent display quality.
Open AccessSingle-Layer Full-Color SiC Diffractive Waveguide AR Glasses with Large FOV and Rainbow Effect Suppression
Augmented reality (AR) technology blends digital content with the real world to create immersive experiences. Diffractive waveguides, a key AR component, are popular because they balance weight, size, image quality, and ease of production. However, traditional glass-based waveguides have drawbacks like narrow viewing angles, blurry images, and rainbow-like distortions. To solve these issues, we developed ultra-thin, lightweight AR glasses using silicon carbide (SiC) and a new design method called the Period-Limited theory (PL theory). Our simulations show that the system works efficiently across red, green, and blue colors, removing rainbow distortions while keeping images clear and vibrant. Tests confirm that the design eliminates rainbow effects, provides a wide 55° field of view (FOV), and keeps each lens extremely light (just 2.12 g). This work offers a practical way to make compact, high-performance AR glasses with excellent display quality.
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. PP (10411135) , 1
Metasurface based wide amplitude modulated Airy beams for particle manipulation
Airy beams with specific amplitude and phase distributions are intriguing due to their self-reconstruction, nondiffraction, and self-accelerating properties. Previously most metasurfaces took only modulating phase for the generation of Airy beams, resulting in a certain distance for beam forming, which hampers their applications in optical manipulation. In this work, we reported a method to generate 2D/array Airy beams by using phase-amplitude-modulated metasurfaces and investigated their particle manipulation. The designed metasurfaces have an ultra-wide amplitude modulation range with a transmittance from 9% to 92% in order that the generated 2D Airy beams can be formed immediately after a short propagation distance. The self-healing property of the generated 2D Airy beams was demonstrated. Quantitative analysis of the optical forces shows that the generated 2D Airy beams can stably trap and drive particles even being obstructed. In addition, we introduced a strategy to build array Airy beams by superposing four rotated 2D ones and demonstrated their self-healing property. Our work advances the application of Airy beams in optical tweezers and highlights their potential in optical, biological, and atmospheric science.
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. PP (10411135) , 1
Metasurface based wide amplitude modulated Airy beams for particle manipulation
Airy beams with specific amplitude and phase distributions are intriguing due to their self-reconstruction, nondiffraction, and self-accelerating properties. Previously most metasurfaces took only modulating phase for the generation of Airy beams, resulting in a certain distance for beam forming, which hampers their applications in optical manipulation. In this work, we reported a method to generate 2D/array Airy beams by using phase-amplitude-modulated metasurfaces and investigated their particle manipulation. The designed metasurfaces have an ultra-wide amplitude modulation range with a transmittance from 9% to 92% in order that the generated 2D Airy beams can be formed immediately after a short propagation distance. The self-healing property of the generated 2D Airy beams was demonstrated. Quantitative analysis of the optical forces shows that the generated 2D Airy beams can stably trap and drive particles even being obstructed. In addition, we introduced a strategy to build array Airy beams by superposing four rotated 2D ones and demonstrated their self-healing property. Our work advances the application of Airy beams in optical tweezers and highlights their potential in optical, biological, and atmospheric science.
- 27 May 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (16) , 4820-4826
Optical spanner for nanoparticle rotation with focused optical vortex generated through a Pancharatnam–Berry phase metalens
Based on the focused optical vortex (OV) generated by a metalens, we studied the physical mechanism for optical manipulation of metal (Ag) nanoparticles in the orbital angular momentum (OAM) field. We found that metal nanoparticles can be stably trapped inside the OV ring and rotated by the azimuthal driving force originating from OAM transfer. The azimuthal force and rotation speed are directly and inversely proportional to the particle size, respectively. The torque for the same particle at the OV ring increases with the increase of the topological charge of the metalens. Considering the same topological charge, the radius of the OV ring or the range of the optical spanner has a positive correlation with the focal length. These kinds of optical tweezers by vortex metalenses can be used as an optical spanner or micro-rotor for lab-on-chip applications.
- 27 May 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (16) , 4820-4826
Optical spanner for nanoparticle rotation with focused optical vortex generated through a Pancharatnam–Berry phase metalens
Based on the focused optical vortex (OV) generated by a metalens, we studied the physical mechanism for optical manipulation of metal (Ag) nanoparticles in the orbital angular momentum (OAM) field. We found that metal nanoparticles can be stably trapped inside the OV ring and rotated by the azimuthal driving force originating from OAM transfer. The azimuthal force and rotation speed are directly and inversely proportional to the particle size, respectively. The torque for the same particle at the OV ring increases with the increase of the topological charge of the metalens. Considering the same topological charge, the radius of the OV ring or the range of the optical spanner has a positive correlation with the focal length. These kinds of optical tweezers by vortex metalenses can be used as an optical spanner or micro-rotor for lab-on-chip applications.
- Open Access
- 7 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 12 (4) , 1-10
Generation of Optical Vortices With Polarization-Insensitive Metasurfaces
Traditionally, optical vortices (OVs) were generated with diffractive optical elements (DOEs) such as spiral phase plate (SPP), fork grating, spatial light modulator (SLM), and liquid crystal display (LCD). Here, a method was proposed for generating OVs by employing all-dielectric polarization-insensitive metasurfaces with cylinder arrays, which have high transmission efficiency. The polarization insensitivity of the metasurfaces was illustrated with the incidence of two pairs of orthogonal polarization, both the phase and transmission efficiency were consistent for the cylinder unit cell, and similar OVs were generated with the cylinder array. The topological charges of the generated OVs can be adjusted through the design of the metasurfaces. OVs with additional characteristics as vector beams, focused beams and Bessel beams were further generated. This work has potential applications in beam shaping, optical tweezers, and optical communication.
- 7 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 12 (4) , 1-10
Open AccessGeneration of Optical Vortices With Polarization-Insensitive Metasurfaces
Traditionally, optical vortices (OVs) were generated with diffractive optical elements (DOEs) such as spiral phase plate (SPP), fork grating, spatial light modulator (SLM), and liquid crystal display (LCD). Here, a method was proposed for generating OVs by employing all-dielectric polarization-insensitive metasurfaces with cylinder arrays, which have high transmission efficiency. The polarization insensitivity of the metasurfaces was illustrated with the incidence of two pairs of orthogonal polarization, both the phase and transmission efficiency were consistent for the cylinder unit cell, and similar OVs were generated with the cylinder array. The topological charges of the generated OVs can be adjusted through the design of the metasurfaces. OVs with additional characteristics as vector beams, focused beams and Bessel beams were further generated. This work has potential applications in beam shaping, optical tweezers, and optical communication.