NQNing Qin

Ning Qin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ning Qin has a total of 137 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Chemo‐Mechanically Robust Li‐Rich Oxide Cathode Interface Enabled By Ion‐Conductive and Antioxidant Binder

    by Ning Qin, Xucheng Lv, Xinxin Zhu, Fangchang Zhang, Wen Luo, Fei Lv, Jingjing Guo, Zhouguang Lu, Tianpin Wu, Jun Lu

    Lithium‐rich manganese‐based oxide (LRMO), characterized by distinctive anionic redox activity, has attracted considerable interest as a cathode candidate owing to the low cost and high energy density potential. However, their practical implementation is severely impeded by the intrinsically sluggish kinetics of the anionic redox reaction and the accompanying interfacial side reactions. Herein, a sodium phytate (SP) crosslinked PVDF binder is developed to enhance interfacial ion transport and suppress mechanochemical degradation from surface oxygen inactivation in LRMO. By tailoring the PVDF crystalline phase for Li + transport and introducing polar groups for enhanced binding, SP ensures a more uniform distribution of electrode components. More importantly, the SP suppresses irreversible surface lattice oxygen oxidation in LRMO, and thus quench the release of reactive oxygen species (ROS) and gaseous O 2 . Thereby, the LRMO@PVDF/SP electrode exhibits substantially enhanced chemo‐mechanical stability and an optimized cathode electrolyte interphase (CEI). It delivers exceptional initial Coulombic efficiency (95%) and discharge capacity (322 mAh/g at 0.1 C), as well as markedly improved cycling stability (maintaining ∼90% capacity retention after 400 cycles at 1 C). This work provides a facile yet scalable strategy for stabilizing the surface lattice oxygen of LRMO cathodes, paving the way for their commercial application.

  • Chemo‐Mechanically Robust Li‐Rich Oxide Cathode Interface Enabled By Ion‐Conductive and Antioxidant Binder

    by Ning Qin, Xucheng Lv, Xinxin Zhu, Fangchang Zhang, Wen Luo, Fei Lv, Jingjing Guo, Zhouguang Lu, Tianpin Wu, Jun Lu

    Lithium‐rich manganese‐based oxide (LRMO), characterized by distinctive anionic redox activity, has attracted considerable interest as a cathode candidate owing to the low cost and high energy density potential. However, their practical implementation is severely impeded by the intrinsically sluggish kinetics of the anionic redox reaction and the accompanying interfacial side reactions. Herein, a sodium phytate (SP) crosslinked PVDF binder is developed to enhance interfacial ion transport and suppress mechanochemical degradation from surface oxygen inactivation in LRMO. By tailoring the PVDF crystalline phase for Li + transport and introducing polar groups for enhanced binding, SP ensures a more uniform distribution of electrode components. More importantly, the SP suppresses irreversible surface lattice oxygen oxidation in LRMO, and thus quench the release of reactive oxygen species (ROS) and gaseous O 2 . Thereby, the LRMO@PVDF/SP electrode exhibits substantially enhanced chemo‐mechanical stability and an optimized cathode electrolyte interphase (CEI). It delivers exceptional initial Coulombic efficiency (95%) and discharge capacity (322 mAh/g at 0.1 C), as well as markedly improved cycling stability (maintaining ∼90% capacity retention after 400 cycles at 1 C). This work provides a facile yet scalable strategy for stabilizing the surface lattice oxygen of LRMO cathodes, paving the way for their commercial application.

  • Open Access

    Site‐Selective Anion‐Cation Regulation of Sulfide Electrolyte Enables Low‐Pressure Dendrite‐Suppressed All‐Solid‐State Lithium Metal Batteries

    by Xinxin Zhu, Xianji Qiao, Ning Qin, Zhiheng Li, Yanqun Lv, Jun Lu, Zaiping Guo

    Achieving stable sulfide‐based all‐solid‐state lithium batteries with Li metal anodes and high‐capacity cathodes under low stack pressure is highly desirable for high‐energy‐density energy storage, but remains challenging because of unstable solid‐solid interfaces and dendrite‐induced short circuits. Here, we develop a site‐selective anion‐cation regulation strategy for argyrodite Li 6 PS 5 Cl electrolyte to couple framework stabilization with interphase chemistry, enabling long‐term dendrite‐suppressed cycling under low stack pressure. Al 3+ substitution for P 5+ forms AlS 4 ‐related local units and strengthens local Al–S bonding, stabilizing the sulfide framework against redox decomposition. Cl − incorporation into the 4 a /4 d anion sublattice promotes Li + transport, delivering a high room‐temperature ionic conductivity of 7.22 mS cm −1 . More importantly, F/Cl regulation redirects the interfacial decomposition pathway from a Li 2 S‐rich/LiCl interphase toward a LiF/LiCl‐rich and Li 2 S‐poor passivation layer, with exposed LiF/LiCl (200) planes that exhibit stronger interfacial adhesion with Li metal. Benefiting from this coupled framework‐interphase regulation, Li | LAPSCF‐Cl | Li symmetric cells cycle for over 8000 h at 0.5 mA cm −2 at 3 MPa and support stable cycling of both NCM811 and sulfur cathodes paired with Li metal under a relatively low pressure of 30 MPa.

  • Open Access

    Site‐Selective Anion‐Cation Regulation of Sulfide Electrolyte Enables Low‐Pressure Dendrite‐Suppressed All‐Solid‐State Lithium Metal Batteries

    by Xinxin Zhu, Xianji Qiao, Ning Qin, Zhiheng Li, Yanqun Lv, Jun Lu, Zaiping Guo

    Achieving stable sulfide‐based all‐solid‐state lithium batteries with Li metal anodes and high‐capacity cathodes under low stack pressure is highly desirable for high‐energy‐density energy storage, but remains challenging because of unstable solid‐solid interfaces and dendrite‐induced short circuits. Here, we develop a site‐selective anion‐cation regulation strategy for argyrodite Li 6 PS 5 Cl electrolyte to couple framework stabilization with interphase chemistry, enabling long‐term dendrite‐suppressed cycling under low stack pressure. Al 3+ substitution for P 5+ forms AlS 4 ‐related local units and strengthens local Al–S bonding, stabilizing the sulfide framework against redox decomposition. Cl − incorporation into the 4 a /4 d anion sublattice promotes Li + transport, delivering a high room‐temperature ionic conductivity of 7.22 mS cm −1 . More importantly, F/Cl regulation redirects the interfacial decomposition pathway from a Li 2 S‐rich/LiCl interphase toward a LiF/LiCl‐rich and Li 2 S‐poor passivation layer, with exposed LiF/LiCl (200) planes that exhibit stronger interfacial adhesion with Li metal. Benefiting from this coupled framework‐interphase regulation, Li | LAPSCF‐Cl | Li symmetric cells cycle for over 8000 h at 0.5 mA cm −2 at 3 MPa and support stable cycling of both NCM811 and sulfur cathodes paired with Li metal under a relatively low pressure of 30 MPa.

  • Integrated Local‐Microstructure Engineering Toward Mechanochemically Robust Ultra‐High Nickel Cathodes

    by Zhouyue Li, Yike Jin, Ning Qin, Xincheng Lei, Xianji Qiao, Dong Su, Tianpin Wu, Jun Lu

    Ni‐rich layered cathodes show exceptional promise for next‐generation high‐energy‐density lithium‐ion batteries. However, higher nickel utilization in layered cathodes readily exacerbates both bulk mechanical failure and interfacial chemistry instability, significantly hindering their practical application. Herein, a comprehensive local lattice regulation strategy was proposed via Mg/Nb co‐doping, which constructed a chemically and mechanically co‐robust LiNi 0.95 Co 0.03 Mn 0.02 O 2 cathode from surface to bulk. The surface‐reconstructed ultrathin disordered rock‐salt phase effectively stabilized the electrochemical interface. Meanwhile, the bulk cation‐disordered structure integrated with a coherent spinel‐like phase mitigated lattice strain and enhanced structural integrity. Therefore, the modified ultra‐high nickel cathode exhibited excellent long‐term cycling stability, high rate capability, and thermal stability. It exhibited high initial coulombic efficiency of 93.24% and a discharge specific capacity of 240.11 mAh·g −1 at 0.1C. It could also deliver a high initial capacity of 210.44 mAh·g −1 at 1C and retain 97.37% of its capacity after 100 cycles. Moreover, it exhibited outstanding performance during cycling at 3C, delivering a superior capacity retention of 81.65% after 500 cycles. It also delivered a remarkable specific capacity of 147.43 mAh·g −1 even at the rate of 15C. This integrated microstructure regulation strategy would pave the way for commercializing ultra‐high‐nickel cathodes in next‐generation high‐energy‐density batteries.


  • Open Access

    Restraining Mechanochemical Failure in High‐Voltage Ni‐Rich Cathode by Coupling Bulk Lattice Pinning With Interphase Self‐Reconstruction

    by Yufeng Yin, Canpei Wang, Xianji Qiao, Zhouyue Li, Guangying Wan, Zhan Wu, Qian Zhang, Yanqun Lv, Liguang Wang, Tianpin Wu, et al.

    Ultrahigh‐nickel layered oxides deliver exceptional energy and power densities for lithium‐ion batteries (LIBs). However, they suffer from severe intra‐ and intergranular cracking driven by accumulated intragranular strain and intergranular parasitic reactions. Herein, a synergistic strategy coupling bulk lattice pinning with interphase self‐reconstruction is proposed to simultaneously suppress these cross‐scale mechanochemical degradation. A coherently grown LiTaO 3 phase stabilizer is introduced into the layered lattice, markedly reducing anisotropic strain by suppressing unit‐cell volume and c‐axis fluctuations through a pinning effect. This stabilized framework further promotes finer and elongated primary particles with eliminated intergranular voids, thereby restraining intragranular cracking and preserving bulk structural integrity. Concurrently, a self‐reconstructing interphase is in situ generated via H + ‐donor decomposition during cycling, forming robust LiF and Li 3 PO 4 inorganic maskants that shield parasitic reactions and inhibit intergranular cracking under high voltage. This dual bulk‐interphase synergistic stabilization enables the cathode superior mechanochemical stability and reaction homogeneity under harsh conditions (4.8 V, 60°C, and 5 C). Consequently, the cathode achieves 94.3% capacity retention after 200 cycles at 4.6 V, while practical pouch cells maintain 83.1% capacity over 600 cycles. By fundamentally arresting multi‐scale mechanochemical failure, this strategy enables durable, high‐voltage Ni‐rich cathodes for safe, long‐life LIBs.


  • Single‐Crystalline Ultrahigh‐Ni Co‐free Cathode with Magnetic Control as an Alternative to Commercial Cobalt‐containing LiNi 0.88 Mn 0.08 Co 0.04 O 2

    by Jixue Shen, Lipeng Yang, Jing Meng, Zhongkai Cao, Xiaoyu Zhao, Liubin Wang, Ning Qin, Zeheng Li, Jianzhong Xu, Jun Lu

    The development of high‐energy low‐cost lithium‐ion batteries has sparked interest in ultrahigh‐Ni Co‐free layered cathodes that offer high capacity, low cost, and environmental friendliness. Yet, their widespread deployment is impeded by the challenges posed by the large magnetic moments of Ni and Mn, as well as the aggregation of the highly spin‐unstable high‐spin state of Ni 3+ at the interface. Herein, an efficient three‐in‐one strategy of internal Al and external Zr is proposed to achieve an ultrastable single‐crystal ultrahigh‐Ni Co‐free cathode, Li(Ni 0.90 Mn 0.08 Al 0.02 ) 0.98 Zr 0.02 O 2 (NMAZ). The strong AlO 6 ligands prevent the formation of high‐spin Ni 3+ . Surface‐enriched Zr restricts the diffusion of Ni within the NiO 6 octahedron. The single‐crystal structure reduces unwanted reactions with the electrolyte. Consequently, NMAZ achieves a favorable unity of material cost and electrochemical performance by reducing the resource expense by >7.5% than conventional Co‐containing single‐crystal LiNi 0.88 Mn 0.08 Co 0.04 O 2 (NMC) and demonstrating excellent calendar lifespan performance. Moreover, it shows better phase stability under high dissociation conditions, alleviates the harmful H2‐H3 phase transformation, and avoids the release of lattice oxygen due to the overlap of Co 3+/4+ 3d and O 2− 2p orbitals upon deep delithiation.


  • Gradient Entropy Surface Architecture Stabilizes LiCoO 2 to 4.7 V

    by Fangchang Zhang, Xinye Mai, Yulin Cao, Xuhui Li, Xiaofeng Wu, Yongcong Huang, Hongzhi Wang, Yanfang Wang, Guiyu Liu, Chun Zeng, et al.

    LiCoO2 (LCO) is the dominant cathode for 3C-type lithium-ion batteries. However, it suffers from severe structural and interfacial deterioration above 4.55 V. Herein, a gradient entropy (GE) surface architecture approach is proposed to stabilize LCO to an ultrahigh cutoff voltage of 4.7 V. This customized architecture is mediated by a homogeneous self-encapsulation layer via the exceptional chelating capability of phytic acid with multiple metal ions (Mg/Al/Ni) on the LCO surface. Upon calcination, a distinctive GE-LCO features a gradient surface architecture with entropy gradually decreasing from exterior to interior, which facilitates the high retention of bulk electrochemical activity while leveraging high-entropy effects to stabilize the surface. Specifically, the higher-entropy surface lowers the Gibbs free energy, producing a thermodynamically stable outer surface. Kinetically, P-Mg-Ni dopants expand the Li channels that enhance Li+ mobility. The cocktail effect substantially stabilizes the surface oxygen by modulating Co 3d-O 2p hybridization. Moreover, the gradient-entropy layer raises the kinetic barrier, thus significantly inhibiting interfacial Co migration. Comprehensive analysis reveals that these coupled entropy-driven mechanisms improve the electrochemical-mechanical stability of the outmost surface, meanwhile preserving its highly electrochemically active bulk. Consequently, GE-LCO exhibits a high capacity of 230.9 mAh/g (0.1C) and superior capacity retention of 80.6% at 4.7 V after 100 cycles.