Marie Macherhammer
Research Subjects
Research Interests
Marie Macherhammer has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Trattner
HyCentA Research GmbH, Inffeldgasse 15, A-8010 Graz, Austria
6 shared publications Alexander Trattner
4 shared publicationsMartin Höglinger
HyCentA Research GmbH
4 shared publications- Eva Wallnöfer-Ogris3 shared publications
Ilena Grimmer
3 shared publicationsStefan Kartusch
3 shared publications
Latest Publications
- Open Access
- 27 August 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 270
Research and technology infrastructures in the European hydrogen economy: Status, needs and innovation concepts
- 27 August 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 270
Open AccessResearch and technology infrastructures in the European hydrogen economy: Status, needs and innovation concepts
- Open Access
- 17 April 2026
- Published by TIB Open Publishing in International Sustainable Energy Conference - Proceedings
- Vol. 2
From Biogas to Grid: Co-Electrolysis and Methanation for High-Yield Biomethane
This paper presents a concept for increasing biomethane yields from biogas plants by combining solid oxide co-electrolysis with downstream methanation, thereby utilizing biogenic CO₂ instead of releasing it unused. A major opportunity for this concept is provided by Austria’s untapped biomethane potential together with existing gas infrastructure and storage capacities for seasonal balancing of renewable gases. A distribution grid case study illustrates how biomethane injection can exceed local demand during periods of low consumption, leading to indirect utilization via recompression, transfer, or storage, while winter demand enables higher direct substitution of fossil gas. To evaluate integration options, a modular system-level simulation framework is developed, linking detailed single-cell SOEC electrochemistry, mass transport, and thermal behaviour with balance-of-plant components and heat-integration strategies. Two application pathways are considered. In the reference plant, H₂ for conventional CO₂ methanation is supplied by a PEM electrolyser. Within this work, alternative concepts based on SOEC technology are investigated using simulation. In a simulations study, a SOEC steam electrolysis is evaluated to supply H₂ for conventional CO₂ methanation. Further, SOEC co-electrolysis is assessed in the simulation to produce tailored syngas for CO methanation with enhanced heat-recovery potential and reduced H₂ demand. Overall, the results indicate that coupling SOEC-based conversion with methanation can improve carbon utilisation, increase renewable methane output, and support flexible operation aligned with grid constraints and seasonal demand.
- 17 April 2026
- Published by TIB Open Publishing in International Sustainable Energy Conference - Proceedings
- Vol. 2
Open AccessFrom Biogas to Grid: Co-Electrolysis and Methanation for High-Yield Biomethane
This paper presents a concept for increasing biomethane yields from biogas plants by combining solid oxide co-electrolysis with downstream methanation, thereby utilizing biogenic CO₂ instead of releasing it unused. A major opportunity for this concept is provided by Austria’s untapped biomethane potential together with existing gas infrastructure and storage capacities for seasonal balancing of renewable gases. A distribution grid case study illustrates how biomethane injection can exceed local demand during periods of low consumption, leading to indirect utilization via recompression, transfer, or storage, while winter demand enables higher direct substitution of fossil gas. To evaluate integration options, a modular system-level simulation framework is developed, linking detailed single-cell SOEC electrochemistry, mass transport, and thermal behaviour with balance-of-plant components and heat-integration strategies. Two application pathways are considered. In the reference plant, H₂ for conventional CO₂ methanation is supplied by a PEM electrolyser. Within this work, alternative concepts based on SOEC technology are investigated using simulation. In a simulations study, a SOEC steam electrolysis is evaluated to supply H₂ for conventional CO₂ methanation. Further, SOEC co-electrolysis is assessed in the simulation to produce tailored syngas for CO methanation with enhanced heat-recovery potential and reduced H₂ demand. Overall, the results indicate that coupling SOEC-based conversion with methanation can improve carbon utilisation, increase renewable methane output, and support flexible operation aligned with grid constraints and seasonal demand.
- Open Access
- 4 March 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 223
A comprehensive overview of reactor design and operating conditions for photoelectrochemical water splitting
- 4 March 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 223
Open AccessA comprehensive overview of reactor design and operating conditions for photoelectrochemical water splitting
- Open Access
- 22 July 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 185
Investigation of favourable operating conditions for electrochemical hydrogen compressors by 3D CFD simulation and single cell tests
- 22 July 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 185
Open AccessInvestigation of favourable operating conditions for electrochemical hydrogen compressors by 3D CFD simulation and single cell tests
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (46) , 3218
Need for Speed: Fast Activation of PEM Electrolyzers for End-of-Line Testing
The Membrane Electrode Assembly (MEA) in a Proton Exchange Membrane Water Electrolyzer (PEMWE) requires an activation procedure (also known as initial conditioning or break-in) to reach its nominal stable performance, which can take up to several days. In large-scale industrial production of electrolyzers, this can create a bottleneck in the manufacturing process, as the functionality of each electrolyzer typically needs to be verified by activating and characterizing it in an end-of-line test. Although several activation methods for PEMWE can be found in the literature, to the authors' knowledge, none have been published with the goal of fast activation. The existing activation protocols are usually derived from PEMFC protocols or specified by the manufacturer without any information on how they were developed [1–4]. The aim of this study is to gain a deeper understanding of the influencing factors of activation procedures in PEMWE in order to develop faster activation protocols for Begin of Life (BoL) characterization. To this end, we are conducting a Design of Experiment (DoE) parameter study in which we test different variations of galvanostatic activation protocols on PEM single cells. Each activation and characterization of a cell is followed by a short AST and a subsequent End of Life (EoL) characterization to see if the activation had an impact on degradation and final performance. The procedure followed for each test in the activation protocol is outlined in Figure 1a. All tests are performed on fresh MEA materials in a Baltic quickCONNECT cell with an active area of 7.2 x 7.2 cm and an active area compression of 2 MPa. The MEA consists of a state-of-the-art Catalyst Coated Membrane (CCM) sandwiched between a platinized titanium felt and Toray carbon paper. After integration into the test bed, the cell is flushed with water on both the anode and cathode sides while being heated to operating temperature, which takes a total of 6 hours. Galvanostatic activation is then performed over a period of 4 hours. This is followed by BoL characterization, during which polarization curves and electrochemical impedance spectra are recorded to evaluate initial performance. The cell is then subjected to an 80 hour Accelerated Stress Test (AST) where the potential is alternated between 0 and 2 V at 10 second intervals at 80 °C cell inlet temperature. Finally, an End of Life (EoL) characterization is performed to determine the final performance. The examined activation parameters, which are the input factors for the DoE, can be seen in Figure 1c. They are the anode inlet temperature, the maximum current density, a soft-start step (applying a lower current density of 0.2 A/cm² for the first 30 minutes), and the mode of current application (static or dynamic cycling between 100 % and 20 % of the maximum current density in 5-minute intervals). The full factorial DoE requires 16 experiments when each factor is varied between 2 states. The full test plan as seen in Figure 1b also includes 3 initial tests where the cell is activated according to the CCM suppliers' recommendation and 2 center points at the beginning and end of the full-factorial test plan. These additional tests show the reproducibility of the test results and any changes in cell performance over the duration of the test series. Through this experimental study, we show the influence of four activation parameters (Temp, current density, soft start, and current mode) on the quality of the activation, the BoL performance, and the initial degradation rate of PEMWE. This will lead to faster activation protocols for the end-of-line testing of PEMWE and will thus help the large-scale industrial production of electrolyzers. [1] Padgett E, Bender G, Alia SM. Membrane Pretreatment and Cell Conditioning for Proton Exchange Membrane Water Electrolysis. Meet. Abstr. 2021;MA2021-02(41):1252. https://doi.org/10.1149/MA2021-02411252mtgabs. [2] Bender G, Carmo M, Smolinka T, Gago A, Danilovic N, Mueller M et al. Initial approaches in benchmarking and round robin testing for proton exchange membrane water electrolyzers. International Journal of Hydrogen Energy 2019;44(18):9174–87. https://doi.org/10.1016/j.ijhydene.2019.02.074. [3] Wang W, Li K, Ding L, Yu S, Xie Z, Cullen DA et al. Exploring the Impacts of Conditioning on Proton Exchange Membrane Electrolyzers by In Situ Visualization and Electrochemistry Characterization. ACS Appl Mater Interfaces 2022;14(7):9002–12. https://doi.org/10.1021/acsami.1c21849. [4] Tomić AZ, Pivac I, Barbir F. A review of testing procedures for proton exchange membrane electrolyzer degradation. Journal of Power Sources 2023;557:232569. https://doi.org/10.1016/j.jpowsour.2022.232569. Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (46) , 3218
Need for Speed: Fast Activation of PEM Electrolyzers for End-of-Line Testing
The Membrane Electrode Assembly (MEA) in a Proton Exchange Membrane Water Electrolyzer (PEMWE) requires an activation procedure (also known as initial conditioning or break-in) to reach its nominal stable performance, which can take up to several days. In large-scale industrial production of electrolyzers, this can create a bottleneck in the manufacturing process, as the functionality of each electrolyzer typically needs to be verified by activating and characterizing it in an end-of-line test. Although several activation methods for PEMWE can be found in the literature, to the authors' knowledge, none have been published with the goal of fast activation. The existing activation protocols are usually derived from PEMFC protocols or specified by the manufacturer without any information on how they were developed [1–4]. The aim of this study is to gain a deeper understanding of the influencing factors of activation procedures in PEMWE in order to develop faster activation protocols for Begin of Life (BoL) characterization. To this end, we are conducting a Design of Experiment (DoE) parameter study in which we test different variations of galvanostatic activation protocols on PEM single cells. Each activation and characterization of a cell is followed by a short AST and a subsequent End of Life (EoL) characterization to see if the activation had an impact on degradation and final performance. The procedure followed for each test in the activation protocol is outlined in Figure 1a. All tests are performed on fresh MEA materials in a Baltic quickCONNECT cell with an active area of 7.2 x 7.2 cm and an active area compression of 2 MPa. The MEA consists of a state-of-the-art Catalyst Coated Membrane (CCM) sandwiched between a platinized titanium felt and Toray carbon paper. After integration into the test bed, the cell is flushed with water on both the anode and cathode sides while being heated to operating temperature, which takes a total of 6 hours. Galvanostatic activation is then performed over a period of 4 hours. This is followed by BoL characterization, during which polarization curves and electrochemical impedance spectra are recorded to evaluate initial performance. The cell is then subjected to an 80 hour Accelerated Stress Test (AST) where the potential is alternated between 0 and 2 V at 10 second intervals at 80 °C cell inlet temperature. Finally, an End of Life (EoL) characterization is performed to determine the final performance. The examined activation parameters, which are the input factors for the DoE, can be seen in Figure 1c. They are the anode inlet temperature, the maximum current density, a soft-start step (applying a lower current density of 0.2 A/cm² for the first 30 minutes), and the mode of current application (static or dynamic cycling between 100 % and 20 % of the maximum current density in 5-minute intervals). The full factorial DoE requires 16 experiments when each factor is varied between 2 states. The full test plan as seen in Figure 1b also includes 3 initial tests where the cell is activated according to the CCM suppliers' recommendation and 2 center points at the beginning and end of the full-factorial test plan. These additional tests show the reproducibility of the test results and any changes in cell performance over the duration of the test series. Through this experimental study, we show the influence of four activation parameters (Temp, current density, soft start, and current mode) on the quality of the activation, the BoL performance, and the initial degradation rate of PEMWE. This will lead to faster activation protocols for the end-of-line testing of PEMWE and will thus help the large-scale industrial production of electrolyzers. [1] Padgett E, Bender G, Alia SM. Membrane Pretreatment and Cell Conditioning for Proton Exchange Membrane Water Electrolysis. Meet. Abstr. 2021;MA2021-02(41):1252. https://doi.org/10.1149/MA2021-02411252mtgabs. [2] Bender G, Carmo M, Smolinka T, Gago A, Danilovic N, Mueller M et al. Initial approaches in benchmarking and round robin testing for proton exchange membrane water electrolyzers. International Journal of Hydrogen Energy 2019;44(18):9174–87. https://doi.org/10.1016/j.ijhydene.2019.02.074. [3] Wang W, Li K, Ding L, Yu S, Xie Z, Cullen DA et al. Exploring the Impacts of Conditioning on Proton Exchange Membrane Electrolyzers by In Situ Visualization and Electrochemistry Characterization. ACS Appl Mater Interfaces 2022;14(7):9002–12. https://doi.org/10.1021/acsami.1c21849. [4] Tomić AZ, Pivac I, Barbir F. A review of testing procedures for proton exchange membrane electrolyzer degradation. Journal of Power Sources 2023;557:232569. https://doi.org/10.1016/j.jpowsour.2022.232569. Figure 1
- Open Access
- 19 June 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 77, 598-611
Advanced testing methods for proton exchange membrane electrolysis stacks
- 19 June 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 77, 598-611
Open AccessAdvanced testing methods for proton exchange membrane electrolysis stacks
- Top Cited PapersOpen Access
- 7 April 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 65, 381-397
A review on understanding and identifying degradation mechanisms in PEM water electrolysis cells: Insights for stack application, development, and research
- 7 April 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 65, 381-397
Top Cited PapersOpen AccessA review on understanding and identifying degradation mechanisms in PEM water electrolysis cells: Insights for stack application, development, and research
- Open Access
- 1 March 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 110, 773-786
Seven ways to decouple low-temperature water electrolysis - A comparative review for alternative green hydrogen production
- 1 March 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 110, 773-786
Open AccessSeven ways to decouple low-temperature water electrolysis - A comparative review for alternative green hydrogen production
- Open Access
- 3 January 2024
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 96 (1-2) , 126-142
Recycalyse – New Sustainable and Recyclable Catalytic Materials for Proton Exchange Membrane Electrolysers
Within the Recycalyse project different research organization and industrial partners worked together to develop catalysts for the oxygen evolution reaction for proton exchange membrane electrolysis that reduce the use of critical raw materials. The catalysts are applied to polymer electrolyte membranes via a direct coating process and tested both in single cells and at stack level. In order to reduce the dependence on material imports in Europe in the long term, recycling is considered for the catalysts, electrodes and the entire system.
- 3 January 2024
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 96 (1-2) , 126-142
Open AccessRecycalyse – New Sustainable and Recyclable Catalytic Materials for Proton Exchange Membrane Electrolysers
Within the Recycalyse project different research organization and industrial partners worked together to develop catalysts for the oxygen evolution reaction for proton exchange membrane electrolysis that reduce the use of critical raw materials. The catalysts are applied to polymer electrolyte membranes via a direct coating process and tested both in single cells and at stack level. In order to reduce the dependence on material imports in Europe in the long term, recycling is considered for the catalysts, electrodes and the entire system.
- Open Access
- 15 June 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (56) , 23818-23832
A development toolchain for a pulsed injector-ejector unit for PEM fuel cell applications
- 15 June 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (56) , 23818-23832
Open AccessA development toolchain for a pulsed injector-ejector unit for PEM fuel cell applications