Kurnia Setiawan Widana
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kurnia Setiawan Widana has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Kurnia Trinopiawan
Pusat Teknologi Bahan Galian Nuklir-BATAN Jl. Lebak Bulus Raya No. 9, Ps. Jumat, Jakarta 12440, Telp (021) 7691775, 7695394, 75912956 Fax (021)7691977
5 shared publications - I. Gde Sukadana
Research Center for Nuclear Material and Radioactive Waste Technology, Research Organization for Nuclear Energy, National Research and Innovation Agency (BRIN)
3 shared publications Agus Sumaryanto
Research Center for Nuclear Fuel Cycle and Radioactive Waste Technology, National Research and Innovation Agency, Building No. 20, BJ Habibie Sains and Technology Area, South Tangerang, 15314, Indonesia
2 shared publicationsAhmad Maksum
Center of Mineral Processing and Corrosion Research, Department of Metallurgy and Materials Engineering, Universitas Indonesia, 16424 Depok, Jawa Barat, Indonesia
2 shared publications- Badrul Munir
Metallurgical and Material Engineering, University of Indonesia, Kampus UI Depok 16424. Jawa Barat – Indonesia
2 shared publications - Fadiah Pratiwi
Research Center for Nuclear Material and Radioactive Waste Technology, Research Organization for Nuclear Energy, National Research and Innovation Agency (BRIN)
2 shared publications
Latest Publications
- Open Access
- 2 December 2024
- Published by National Research and Innovation Agency in Atom Indonesia
- Vol. 51 (1) , 81-86
Selection of Bacteria from Mamuju’s NORM as Uranium and Thorium Bioleaching Agents
Natural materials that can cause increased radiation exposure to the surrounding environment are called Naturally Occurring Radioactive Materials (NORM). NORM contains uranium and thorium, critical elements with strategic and economic value. Conventional separation methods include chemical leaching and partial precipitation with strong acids and bases. These methods require large costs and produce waste harmful to the environment. This study explores bioleaching as an efficient and eco-friendly alternative to address these limitations. The indigenous bacteria used in bioleaching were isolated directly from NORM in Mamuju. This study aims to isolate, select, and evaluate bacteria from NORM as potential bioleaching agents. The methodology of this study includes NORM characterization, bacterial isolation and selection, molecular identification, and resistance testing of selected bacteria. The study successfully isolated eight bacterial strains from NORM, among which isolate L0A demonstrated the highest bioleaching potential. After five days of incubation, L0A achieved uranium and thorium concentrations of 2.508 mg/L and 10.5946 mg/L, respectively. Molecular identification revealed that L0A belongs to Bacillus sp. These findings demonstrate the potential of Bacillus sp. L0A is a bioleaching agent, paving the way for developing efficient, sustainable, and environmentally friendly methods for extracting valuable radioactive elements from NORM.
- 2 December 2024
- Published by National Research and Innovation Agency in Atom Indonesia
- Vol. 51 (1) , 81-86
Open AccessSelection of Bacteria from Mamuju’s NORM as Uranium and Thorium Bioleaching Agents
Natural materials that can cause increased radiation exposure to the surrounding environment are called Naturally Occurring Radioactive Materials (NORM). NORM contains uranium and thorium, critical elements with strategic and economic value. Conventional separation methods include chemical leaching and partial precipitation with strong acids and bases. These methods require large costs and produce waste harmful to the environment. This study explores bioleaching as an efficient and eco-friendly alternative to address these limitations. The indigenous bacteria used in bioleaching were isolated directly from NORM in Mamuju. This study aims to isolate, select, and evaluate bacteria from NORM as potential bioleaching agents. The methodology of this study includes NORM characterization, bacterial isolation and selection, molecular identification, and resistance testing of selected bacteria. The study successfully isolated eight bacterial strains from NORM, among which isolate L0A demonstrated the highest bioleaching potential. After five days of incubation, L0A achieved uranium and thorium concentrations of 2.508 mg/L and 10.5946 mg/L, respectively. Molecular identification revealed that L0A belongs to Bacillus sp. These findings demonstrate the potential of Bacillus sp. L0A is a bioleaching agent, paving the way for developing efficient, sustainable, and environmentally friendly methods for extracting valuable radioactive elements from NORM.
- Open Access
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2967 (1) , 170006
Beneficiation and characterization of low-grade monazite from Bangka tin mining post processing
The Bangka Belitung Islands are well known in the mining world as the largest tin-producing region of the mineral cassiterite. The rest of the tin mining result
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2967 (1) , 170006
Open AccessBeneficiation and characterization of low-grade monazite from Bangka tin mining post processing
The Bangka Belitung Islands are well known in the mining world as the largest tin-producing region of the mineral cassiterite. The rest of the tin mining result
- Open Access
Radiometric Signatures of Gold Mineralization Zone in Pongkor, West Java, Indonesia: A Baseline for Radiometric Mapping Application on Low-Sulfidation Epithermal Deposit
Radiometric mapping could play a prominent role in locating the host rock or alteration that leads to gold mineralization. Nevertheless, in low-sulfidation epithermal gold deposits, the radiometric signatures have to be priorly characterized due to their geometry. It is comprised of a small ore vein system within the large alteration zones. The Pongkor gold mine is a low-sulfidation epithermal deposit and was selected for this purpose. The method started with the surface identification of radiometric signatures on altered and unaltered rocks near Pongkor using portable spectrometers. They are followed by the characterization of the underground mining front, which is comprised of different types of veins and host rocks. The results show that the altered rocks were characterized by a high K% and a low eTh/K ratio. Vice versa, the mineralized veins show low radioelement concentrations. Following the characterization of the geometry of alteration zones and mineralized veins, a study of the relationship between radioelements detected by radiometric mapping and gold pathfinder elements was conducted. Gold pathfinders of Mn, Fe, Zn, As, and Pb were selected for correlation studies with the radioelement. The pathfinders and radioelements were more significantly correlated in veins compared to the host rock. Based on this study, radiometric mapping has the potential and benefit of being applied in the exploration of low-sulfidation epithermal gold deposits. An alteration zone could be delineated by K or eTh/K as an anomaly indicator, and the vein bodies could also be delineated using low K or eTh as an anomaly indicator.
Open AccessRadiometric Signatures of Gold Mineralization Zone in Pongkor, West Java, Indonesia: A Baseline for Radiometric Mapping Application on Low-Sulfidation Epithermal Deposit
Radiometric mapping could play a prominent role in locating the host rock or alteration that leads to gold mineralization. Nevertheless, in low-sulfidation epithermal gold deposits, the radiometric signatures have to be priorly characterized due to their geometry. It is comprised of a small ore vein system within the large alteration zones. The Pongkor gold mine is a low-sulfidation epithermal deposit and was selected for this purpose. The method started with the surface identification of radiometric signatures on altered and unaltered rocks near Pongkor using portable spectrometers. They are followed by the characterization of the underground mining front, which is comprised of different types of veins and host rocks. The results show that the altered rocks were characterized by a high K% and a low eTh/K ratio. Vice versa, the mineralized veins show low radioelement concentrations. Following the characterization of the geometry of alteration zones and mineralized veins, a study of the relationship between radioelements detected by radiometric mapping and gold pathfinder elements was conducted. Gold pathfinders of Mn, Fe, Zn, As, and Pb were selected for correlation studies with the radioelement. The pathfinders and radioelements were more significantly correlated in veins compared to the host rock. Based on this study, radiometric mapping has the potential and benefit of being applied in the exploration of low-sulfidation epithermal gold deposits. An alteration zone could be delineated by K or eTh/K as an anomaly indicator, and the vein bodies could also be delineated using low K or eTh as an anomaly indicator.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2517 (1)
Characterization of unconventional rare earth elements resources from Bangka monazite and tin slag
Rare earth elements (REE) is one of the materials that can be applied in advance technology including battery, but the price that rose sharply in 2011 puts the risk of supplying it in the supply chain of this material, so currently, other materials based on Li and Ni elements are the main choice. New materials using LTJ provide significant technological developments in materials science. The development of this material is widely applied in industry to improve product quality. Unconventional mineral resources are one of the resources obtained from the co or by-product mineral processing such as in tin mining, which is the residue from the processing produces tin-bearing minerals (MIT), one co- product is monazite and by-product is tin slag (slag). Both contain quite high rare earth elements depending on the level of beneficiation and processing. Bangka’s monazite and tin slag concentrate contain a total of about 60% and 7% of rare- earth elements (TREO), respectively about 1,000 ppm and 500 ppm uranium and 6% and 5,000 ppm thorium. The availability of rare earth resources in Indonesia has not been widely publicized due to their availability as co-product commodity in tin mining. The research purpose is to estimate early resources to support the processing and utilization of rare earth elements-based industries. The research method is carried out through inventory, sampling, and testing of tin slag samples from 25 smelters. The samples were analysed using X-Ray Fluorescence (XRF) method to measure REE and their concentration. The monazite production as co-product of tin mining from 2012 to present is 16,448 tons while slag 1 and slag 2 as by products are 456,464 tons and 186,906 tons. Based on the XRF analysis on the samples, total REE in monazite, slag 1, and slag 2 are 56.79%, 11.8%, and 8.68% respectively. The REE resources from monazite and tin slags are 9,341 tons and 70,314 tons respectively. Total resources are 79,655 tons REE as unconventional resources.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2517 (1)
Open AccessCharacterization of unconventional rare earth elements resources from Bangka monazite and tin slag
Rare earth elements (REE) is one of the materials that can be applied in advance technology including battery, but the price that rose sharply in 2011 puts the risk of supplying it in the supply chain of this material, so currently, other materials based on Li and Ni elements are the main choice. New materials using LTJ provide significant technological developments in materials science. The development of this material is widely applied in industry to improve product quality. Unconventional mineral resources are one of the resources obtained from the co or by-product mineral processing such as in tin mining, which is the residue from the processing produces tin-bearing minerals (MIT), one co- product is monazite and by-product is tin slag (slag). Both contain quite high rare earth elements depending on the level of beneficiation and processing. Bangka’s monazite and tin slag concentrate contain a total of about 60% and 7% of rare- earth elements (TREO), respectively about 1,000 ppm and 500 ppm uranium and 6% and 5,000 ppm thorium. The availability of rare earth resources in Indonesia has not been widely publicized due to their availability as co-product commodity in tin mining. The research purpose is to estimate early resources to support the processing and utilization of rare earth elements-based industries. The research method is carried out through inventory, sampling, and testing of tin slag samples from 25 smelters. The samples were analysed using X-Ray Fluorescence (XRF) method to measure REE and their concentration. The monazite production as co-product of tin mining from 2012 to present is 16,448 tons while slag 1 and slag 2 as by products are 456,464 tons and 186,906 tons. Based on the XRF analysis on the samples, total REE in monazite, slag 1, and slag 2 are 56.79%, 11.8%, and 8.68% respectively. The REE resources from monazite and tin slags are 9,341 tons and 70,314 tons respectively. Total resources are 79,655 tons REE as unconventional resources.
- Open Access
- 13 December 2022
- Published by National Research and Innovation Agency
50 Tahun Eksplorasi Uranium di Indonesia
Uranium merupakan bahan bakar utama reaktor nuklir yang memiliki energi besar. Uranium dapat dimanfaatkan sebagai bahan bakar reaktor nuklir yang dapat menghasilkan listrik dalam kapasitas yang sangat besar. Nuklir merupakan satu-satunya energi yang terbukti dapat dikembangkan di berbagai kondisi lingkungan dan dapat menghasilkan energi listrik secara terus-menerus tanpa emisi karbon dioksida dan polusi udara sehingga dapat dikatakan ramah lingkungan. Buku 50 Tahun Eksplorasi Uranium di Indonesia ini mengulas rangkuman kegiatan serta hasil penelitian dan pengembangan selama 50 tahun Pusat Teknologi Bahan Galian Nuklir (PTBGN) BATAN. Saat ini PTBGN telah berubah menjadi Pusat Riset Teknologi Daur Bahan Bakar Nuklir dan Limbah Radioaktif (PRTDBBNLR) BRIN. Membaca buku ini akan membawa Anda lebih memahami kegiatan eksplorasi uranium di Indonesia. Buku ini dapat menjadi sarana tepat untuk alih iptek bagi masyarakat dan generasi milenial untuk mendalami eksplorasi, penambangan, dan pengolahan uranium pada masa sekarang dan yang akan datang. Selamat Membaca!
- 13 December 2022
- Published by National Research and Innovation Agency
Open Access50 Tahun Eksplorasi Uranium di Indonesia
Uranium merupakan bahan bakar utama reaktor nuklir yang memiliki energi besar. Uranium dapat dimanfaatkan sebagai bahan bakar reaktor nuklir yang dapat menghasilkan listrik dalam kapasitas yang sangat besar. Nuklir merupakan satu-satunya energi yang terbukti dapat dikembangkan di berbagai kondisi lingkungan dan dapat menghasilkan energi listrik secara terus-menerus tanpa emisi karbon dioksida dan polusi udara sehingga dapat dikatakan ramah lingkungan. Buku 50 Tahun Eksplorasi Uranium di Indonesia ini mengulas rangkuman kegiatan serta hasil penelitian dan pengembangan selama 50 tahun Pusat Teknologi Bahan Galian Nuklir (PTBGN) BATAN. Saat ini PTBGN telah berubah menjadi Pusat Riset Teknologi Daur Bahan Bakar Nuklir dan Limbah Radioaktif (PRTDBBNLR) BRIN. Membaca buku ini akan membawa Anda lebih memahami kegiatan eksplorasi uranium di Indonesia. Buku ini dapat menjadi sarana tepat untuk alih iptek bagi masyarakat dan generasi milenial untuk mendalami eksplorasi, penambangan, dan pengolahan uranium pada masa sekarang dan yang akan datang. Selamat Membaca!
- Open Access
- 31 August 2020
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (6 (106)) , 24-30
A study of cerium extraction from Bangka tin slag using hydrochloric acid
- 31 August 2020
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (6 (106)) , 24-30
Open AccessA study of cerium extraction from Bangka tin slag using hydrochloric acid
- Open Access
- 1 August 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 547 (1) , 012049
Study to Enhance Tantalum and Niobium Contents in Bangka Tin Slag by NaOH and HClO4 Leaching
Indonesia is rich in tin ores. Slags from processing of tin ores naturally contain substantial amount of valuable metals, in this case tiobium and tantalum. This research explores how niobium and tantalum contents in local Bangka tin slag can be enhanced using NaOH and HClO4leaching reagents. First, Bangka tin slag was NaOH-leached and, then, the slag underwent HClO4leaching. Before undergoing any processes, the contents of niobium and tantalum in Bangka tin slag were 0.47% and 0.23%, respectively. After passing two leaching processes, niobium and tantalum contents reached 1.28% and 0.79%, respectively.
- 1 August 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 547 (1) , 012049
Open AccessStudy to Enhance Tantalum and Niobium Contents in Bangka Tin Slag by NaOH and HClO4 Leaching
Indonesia is rich in tin ores. Slags from processing of tin ores naturally contain substantial amount of valuable metals, in this case tiobium and tantalum. This research explores how niobium and tantalum contents in local Bangka tin slag can be enhanced using NaOH and HClO4leaching reagents. First, Bangka tin slag was NaOH-leached and, then, the slag underwent HClO4leaching. Before undergoing any processes, the contents of niobium and tantalum in Bangka tin slag were 0.47% and 0.23%, respectively. After passing two leaching processes, niobium and tantalum contents reached 1.28% and 0.79%, respectively.
- Open Access
- 1 August 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 547 (1) , 012050
Enrichment of Tantalum and Niobium Contents in Bangka Tin Slag by NaOH and H3PO4Leaching
This study explores how 0.23% tantalum and 0.47% niobium in tin slag from the Bangka-Belitung archipelago, Indonesia, are upgraded. To enrich the contents of both metals, this research involves 8M NaOH leaching followed by 0.5M, 1M, and 1.5M phosphoric acid. First, tin slag was roasted at 900°C for 2 hours. Then, the sample was NaOH-leached while H3PO4 was exploited to leach its residues. Next, each of the residues from the leaching processes was characterized by XRF while the filtrates characterization used AAS and ICP-OES. On the one hand, NaOH leaching has proven to decrease the contents of iron, calcium, titanium, and aluminum. On the other hand, 0.5 M H3PO4 leaching optimizes tantalum contents up to 0.85% while 1.0 M H3PO4 leaching maximizes niobium contents up to 1.45%.
- 1 August 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 547 (1) , 012050
Open AccessEnrichment of Tantalum and Niobium Contents in Bangka Tin Slag by NaOH and H3PO4Leaching
This study explores how 0.23% tantalum and 0.47% niobium in tin slag from the Bangka-Belitung archipelago, Indonesia, are upgraded. To enrich the contents of both metals, this research involves 8M NaOH leaching followed by 0.5M, 1M, and 1.5M phosphoric acid. First, tin slag was roasted at 900°C for 2 hours. Then, the sample was NaOH-leached while H3PO4 was exploited to leach its residues. Next, each of the residues from the leaching processes was characterized by XRF while the filtrates characterization used AAS and ICP-OES. On the one hand, NaOH leaching has proven to decrease the contents of iron, calcium, titanium, and aluminum. On the other hand, 0.5 M H3PO4 leaching optimizes tantalum contents up to 0.85% while 1.0 M H3PO4 leaching maximizes niobium contents up to 1.45%.
- Open Access
- 26 October 2018
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (12 (95)) , 56-64
Enrichment on Bangka tin slag’s tantalum and niobium oxide contents through non-fluoride process
Enrichment on Bangka tin slag’s tantalum and niobium oxide contents through non-fluoride process
- 26 October 2018
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (12 (95)) , 56-64
Open AccessEnrichment on Bangka tin slag’s tantalum and niobium oxide contents through non-fluoride process
Enrichment on Bangka tin slag’s tantalum and niobium oxide contents through non-fluoride process
- 21 September 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2011 (1) , 020148
The synthesis and certification of in-house monazite sand certified reference materials (CRM)
The synthesis and certification of CRM of monazite sand by ISO 13528-2008 and ISO 35-2006 have been done. CRM of monazite sand is necessary to support the determination of the rare earth element composition in the mining materials. The synthesis and certification of monazite sand CRM are done by using monazite sand from Bangka. Monazite sand is dried at 110° C, crushed and sieved until the powder is obtained with the grain size of 200 mesh. The monazite sand powder is homogenized, then water content tested, homogeneous test, stabilization test and characterization test are conducted. Certificate of parameter test results in the CRM monazite sand from 7 accredited laboratories. In the evaluation of data obtained that CRM monazite sand candidate has been homogeneous, stable, and water content0.5Ce2(PO4)3, monazite-Ce (Ce, La, Th, Nd)PO4, silica SiO2, titanium sulfide TiS, monazite (Ce, La, Y, Th)PO4 and cerium phosphate CePO4. The certificate of parameter test results in CRM monazite sand from 7 accredited laboratories with ISO 35-2006 statistical methods obtained 20 oxides, among others CeO2 (31.506±0.075)%, La2O3 (13.165±0.038)%, Nd2O3 (11.025±0.062)%, Y2O3 (3.931±0.024)%, ThO2 (6.283±0.022)%, etc. Compared with Myanmar monazite and Egyptian monazite, CeO2, La2O3, Y2O3, Pr6O11 concentrations in the Indonesia monazite sand CRM from Bangka are higher. CRM of monazite sand can be used as the standard material on the composition of rare earth elements determination in the mining result.
- 21 September 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2011 (1) , 020148
The synthesis and certification of in-house monazite sand certified reference materials (CRM)
The synthesis and certification of CRM of monazite sand by ISO 13528-2008 and ISO 35-2006 have been done. CRM of monazite sand is necessary to support the determination of the rare earth element composition in the mining materials. The synthesis and certification of monazite sand CRM are done by using monazite sand from Bangka. Monazite sand is dried at 110° C, crushed and sieved until the powder is obtained with the grain size of 200 mesh. The monazite sand powder is homogenized, then water content tested, homogeneous test, stabilization test and characterization test are conducted. Certificate of parameter test results in the CRM monazite sand from 7 accredited laboratories. In the evaluation of data obtained that CRM monazite sand candidate has been homogeneous, stable, and water content0.5Ce2(PO4)3, monazite-Ce (Ce, La, Th, Nd)PO4, silica SiO2, titanium sulfide TiS, monazite (Ce, La, Y, Th)PO4 and cerium phosphate CePO4. The certificate of parameter test results in CRM monazite sand from 7 accredited laboratories with ISO 35-2006 statistical methods obtained 20 oxides, among others CeO2 (31.506±0.075)%, La2O3 (13.165±0.038)%, Nd2O3 (11.025±0.062)%, Y2O3 (3.931±0.024)%, ThO2 (6.283±0.022)%, etc. Compared with Myanmar monazite and Egyptian monazite, CeO2, La2O3, Y2O3, Pr6O11 concentrations in the Indonesia monazite sand CRM from Bangka are higher. CRM of monazite sand can be used as the standard material on the composition of rare earth elements determination in the mining result.