Yoshinori Enomoto

High-intensity positron sources are critical for next-generation electron-positron colliders, where positron beam quality and characteristics directly impact the luminosity. Accurate modeling and validated simulation tools for positron sources are essential to optimize their performance. However, modeling a positron source tends to be complex, as it involves multiple interdependent stages, from positron production and capture dynamics to beam transport through the injector linac to the collider ring. In this work, we present a start-to-end simulation tool developed for positron sources modeling. The model was benchmarked against existing simulation tools and validated through experimental measurements conducted at the SuperKEKB positron source. Key operational parameters were systematically scanned to evaluate the simulation model performance, including the primary electron impact position on the target, solenoid field strength around the capture linac, and rf phase settings. The primary figure-of-merit for all validation tests was the positron yield at the end of the SuperKEKB positron capture section. Our model reproduces the measured positron yield ( 0.603 ± 0.003 ) under nominal operating conditions, with the simulation result of 0.603 lying well within the 0.5% statistical uncertainty. Furthermore, the simulation results demonstrate a very good agreement with experimental data and other simulation tools, confirming the model’s reliability and establishing a framework for future positron source studies.

A new cryogenic linear ion trap beamline has been constructed and commissioned, which serves to inject cold molecular and cluster ions into the RIKEN cryogenic electrostatic ring (RICE). Ions are created with an electrospray ion source, and a quadrupole mass filter is used for mass-selection prior to trap injection. The radio frequency octupole ion trap can be continuously loaded with ions and features a fast ion extraction mode to create short ion bunches with tens of μs duration. We report here on the simulations and development of the ion trap beamline and validate performance with the moderately heavy molecular cation methylene blue. Characterization of the novel trap design with additional wedge-shaped electrodes was carried out, which includes the determination of the temporal and spatial shape of the ion bunch and the total number of ions after extraction. Finally, these ion bunches are synchronized with the switching of a pulsed high-voltage acceleration device downstream of the trap, where the ions obtain a kinetic energy of up to 20 keV. The preparation and control of the keV ion beam are demonstrated for the ion injection into RICE.

A new remote-controllable sensing system for a laser-based alignment system is in development to measure slow dynamic displacements of the tunnel floor in real time at the KEKB injector linac. Although the injector linac had initially been aligned with a laser-based alignment system, we have found that, based on recent real-time observations, the transverse displacements of the tunnel floor to the laser axis caused by dynamic ground motion are not negligibly small compared with the required alignment tolerance, in terms of the straightness of the beam line. Based on spatial and temporal cross-correlation analyses performed using displacement vectors from data recorded during a nearly eight-month period, it was found that the tunnel floor moves coherently in space and time domains over the entire length of the linac on average over long periods of time, while the cross-correlation function varies irregularly and complexly over shorter periods of time. This report describes in detail the basic design, experimental results, and present status of the new remote-sensing system for real-time alignment observations at the KEKB injector linac.

We have been developing a cryogenic electrostatic ion storage ring to explore especially the cooling process and collision dynamics of the cold molecular ions in the specific vibrational and rotational state. Recently, we succeeded in storing of 15 keV Ne⁺ ions in the ring stably.

Recently, the production of low energy anti-hydrogen atoms in the cusp trap with the use of 150eV antiproton beams from the MUSASHI trap was reported. The purpose of producing low energy anti-hydrogen atoms in a cusped magnetic field is to extract a polarized anti-hydrogen beam to a field free region, so that the hyperfine structure of anti-hydrogen atoms can be measured.