Yiting Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yiting Kang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Jue Yang
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
4 shared publications - Lei Liu
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
2 shared publications - Riya Zeng
China North Vehicle Research Institute, Beijing 100072, China
2 shared publications - Xinxin Zhao
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
2 shared publications - Biao Xue
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
1 shared publication - Bonan Qin
China North Vehicle Research Institute, Beijing 100072, China
1 shared publication
Latest Publications
- Open Access
- 2 November 2026
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 17 (11) , 577
Operating-Condition-Dependent Recoverable Stability Boundary for Risk-Supervised Direct Yaw-Moment Control of Distributed-Drive Electric Vehicles
A condition-dependent recoverable stability boundary is proposed for risk-supervised direct yaw-moment control of distributed-drive electric vehicles. Recoverable states are identified through long-horizon nonlinear trajectories converging to a stable equilibrium without yaw-moment intervention. Stable-manifold information is used only when consistent with numerical classification. Conservative convex inner approximations with common half-space normals enable boundary updates through database lookup and bilinear interpolation. A boundary-utilization index continuously regulates yaw-moment participation within model predictive control. Compared with a geometric phase-plane boundary, enclosed areas increase by 53.3% and 145.2% at 110 and 80 km/h with adhesion coefficients of 0.60 and 0.50, respectively. At 110 and 70 km/h with adhesion coefficients of 0.80 and 0.50, the increases are 58.0% and 158.2%. No overestimation is observed on the evaluation grid. In the first two conditions, peak sideslip-angle errors decrease by 36.4% and 45.2% relative to permissive fixed-boundary control, while peak additional yaw moments are 72.7% and 63.2% lower than with conservative fixed-boundary control. At 80 km/h with adhesion coefficient of 0.35, peak sideslip-angle error decreases by 55.8% relative to no yaw-moment control. Ten co-simulations yield an aggregate equivalent mean simulation execution time of 1.54 ms per 10 ms control interval.
- 2 November 2026
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 17 (11) , 577
Open AccessOperating-Condition-Dependent Recoverable Stability Boundary for Risk-Supervised Direct Yaw-Moment Control of Distributed-Drive Electric Vehicles
A condition-dependent recoverable stability boundary is proposed for risk-supervised direct yaw-moment control of distributed-drive electric vehicles. Recoverable states are identified through long-horizon nonlinear trajectories converging to a stable equilibrium without yaw-moment intervention. Stable-manifold information is used only when consistent with numerical classification. Conservative convex inner approximations with common half-space normals enable boundary updates through database lookup and bilinear interpolation. A boundary-utilization index continuously regulates yaw-moment participation within model predictive control. Compared with a geometric phase-plane boundary, enclosed areas increase by 53.3% and 145.2% at 110 and 80 km/h with adhesion coefficients of 0.60 and 0.50, respectively. At 110 and 70 km/h with adhesion coefficients of 0.80 and 0.50, the increases are 58.0% and 158.2%. No overestimation is observed on the evaluation grid. In the first two conditions, peak sideslip-angle errors decrease by 36.4% and 45.2% relative to permissive fixed-boundary control, while peak additional yaw moments are 72.7% and 63.2% lower than with conservative fixed-boundary control. At 80 km/h with adhesion coefficient of 0.35, peak sideslip-angle error decreases by 55.8% relative to no yaw-moment control. Ten co-simulations yield an aggregate equivalent mean simulation execution time of 1.54 ms per 10 ms control interval.
- Open Access
Reliability- and Sensitivity-Guided Co-Estimation of Vehicle States, Tire Cornering Stiffness, and Tire-Road Adhesion Coefficient
Reliable estimation of vehicle states, tire cornering stiffness, and the tire-road adhesion coefficient are essential for vehicle lateral stability and intelligent chassis control. Under low adhesion, nonlinear tire operation, and weak excitation, lateral-force residuals are jointly affected by cornering-stiffness variation, adhesion-coefficient variation, and tire-force saturation, which may cause erroneous parameter adaptation. This paper proposes a reliability- and sensitivity-guided co-estimation method for vehicle states, tire cornering stiffness, and the tire-road adhesion coefficient. A hierarchical framework is developed based on a planar 3-DOF vehicle model and a Fiala-type nonlinear tire model. Front- and rear-axle lateral-force pseudo-measurements are reconstructed from lateral acceleration and yaw angular acceleration, without requiring additional tire-force sensors. Parameter-update reliability is evaluated by considering lateral excitation, longitudinal slip, adhesion utilization, and normalized lateral-force residual consistency. Normalized lateral-force sensitivities are then used to allocate the residual between the cornering-stiffness and adhesion-coefficient update channels. CarSim/Simulink co-simulations under high-, intermediate-, and low-adhesion double-lane-change maneuvers demonstrate that the proposed method improves sideslip-angle and lateral-velocity estimation accuracy, suppresses erroneous cornering-stiffness adaptation, and provides more stable estimates of the tire-road adhesion coefficient.
Open AccessReliability- and Sensitivity-Guided Co-Estimation of Vehicle States, Tire Cornering Stiffness, and Tire-Road Adhesion Coefficient
Reliable estimation of vehicle states, tire cornering stiffness, and the tire-road adhesion coefficient are essential for vehicle lateral stability and intelligent chassis control. Under low adhesion, nonlinear tire operation, and weak excitation, lateral-force residuals are jointly affected by cornering-stiffness variation, adhesion-coefficient variation, and tire-force saturation, which may cause erroneous parameter adaptation. This paper proposes a reliability- and sensitivity-guided co-estimation method for vehicle states, tire cornering stiffness, and the tire-road adhesion coefficient. A hierarchical framework is developed based on a planar 3-DOF vehicle model and a Fiala-type nonlinear tire model. Front- and rear-axle lateral-force pseudo-measurements are reconstructed from lateral acceleration and yaw angular acceleration, without requiring additional tire-force sensors. Parameter-update reliability is evaluated by considering lateral excitation, longitudinal slip, adhesion utilization, and normalized lateral-force residual consistency. Normalized lateral-force sensitivities are then used to allocate the residual between the cornering-stiffness and adhesion-coefficient update channels. CarSim/Simulink co-simulations under high-, intermediate-, and low-adhesion double-lane-change maneuvers demonstrate that the proposed method improves sideslip-angle and lateral-velocity estimation accuracy, suppresses erroneous cornering-stiffness adaptation, and provides more stable estimates of the tire-road adhesion coefficient.
- Open Access
- 16 January 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (1) , 76
Boundary-Aware Multi-Point Preview Control: An Algorithm for Autonomous Articulated Mining Vehicles Operating in Highly Constrained Underground Spaces
To achieve the automation and intelligence of mining equipment, it is essential to address the challenge of autonomous driving, with the core task being how to navigate safely from the starting point to the mining area endpoint. This paper proposes a boundary-aware multi-point preview control algorithm to tackle the strong dependency on predefined paths and the lack of foresight in the autonomous driving of underground articulated mining vehicles in highly confined underground spaces. The algorithm determines the driving direction by calculating the vehicle’s real-time state and LiDAR data, previewing road conditions without relying on preset path planning. Experiments conducted in a ROS Noetic/GAZEBO 11 simulation environment compared the proposed method with single-point and two-point preview algorithms, validating the effectiveness of the boundary-aware multi-point preview control. The results show that the proposed control strategy yields the lowest lateral deviation and the highest steering smoothness compared to single-point and two-point preview algorithms; it also outperforms the standard multi-point preview algorithm. This demonstrates its superior performance. Specifically, the proposed boundary-aware multi-point preview algorithm outperformed other methods in terms of steering smoothness and stability, significantly enhancing the vehicle system’s adaptability, robustness, and safety.
- 16 January 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (1) , 76
Open AccessBoundary-Aware Multi-Point Preview Control: An Algorithm for Autonomous Articulated Mining Vehicles Operating in Highly Constrained Underground Spaces
To achieve the automation and intelligence of mining equipment, it is essential to address the challenge of autonomous driving, with the core task being how to navigate safely from the starting point to the mining area endpoint. This paper proposes a boundary-aware multi-point preview control algorithm to tackle the strong dependency on predefined paths and the lack of foresight in the autonomous driving of underground articulated mining vehicles in highly confined underground spaces. The algorithm determines the driving direction by calculating the vehicle’s real-time state and LiDAR data, previewing road conditions without relying on preset path planning. Experiments conducted in a ROS Noetic/GAZEBO 11 simulation environment compared the proposed method with single-point and two-point preview algorithms, validating the effectiveness of the boundary-aware multi-point preview control. The results show that the proposed control strategy yields the lowest lateral deviation and the highest steering smoothness compared to single-point and two-point preview algorithms; it also outperforms the standard multi-point preview algorithm. This demonstrates its superior performance. Specifically, the proposed boundary-aware multi-point preview algorithm outperformed other methods in terms of steering smoothness and stability, significantly enhancing the vehicle system’s adaptability, robustness, and safety.
- Open Access
Path Tracking Control for Underground Articulated Vehicles with Multi-Timescale Predictive Modeling
To enhance the path-tracking accuracy and control stability of articulated underground vehicles navigating high-curvature tunnels, this paper proposes a novel Multi-Time-Scale Nonlinear Model Predictive Control (MTS-NMPC) strategy. The core innovation lies in its dynamic adaptation of the prediction horizon to simultaneously compensate for the body torsion effects and yaw deviations induced by high-speed cornering. A high-fidelity vehicle dynamics model is first established. Subsequently, an adaptive mechanism is designed to adjust the prediction horizon based on the reference speed and road curvature. Experimental results demonstrate that the proposed MTS-NMPC achieves remarkable reductions of 35% and 17% in the maximum lateral tracking error and heading deviation, respectively, compared to conventional NMPC. It also improves stability by suppressing the velocity fluctuations of the articulated joint. The superior control performance and robustness of our method are further validated through field tests in an underground mine.
Open AccessPath Tracking Control for Underground Articulated Vehicles with Multi-Timescale Predictive Modeling
To enhance the path-tracking accuracy and control stability of articulated underground vehicles navigating high-curvature tunnels, this paper proposes a novel Multi-Time-Scale Nonlinear Model Predictive Control (MTS-NMPC) strategy. The core innovation lies in its dynamic adaptation of the prediction horizon to simultaneously compensate for the body torsion effects and yaw deviations induced by high-speed cornering. A high-fidelity vehicle dynamics model is first established. Subsequently, an adaptive mechanism is designed to adjust the prediction horizon based on the reference speed and road curvature. Experimental results demonstrate that the proposed MTS-NMPC achieves remarkable reductions of 35% and 17% in the maximum lateral tracking error and heading deviation, respectively, compared to conventional NMPC. It also improves stability by suppressing the velocity fluctuations of the articulated joint. The superior control performance and robustness of our method are further validated through field tests in an underground mine.
- Open Access
- 24 July 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (8) , 417
AI-Driven Automated Test Generation Framework for VCU: A Multidimensional Coupling Approach Integrating Requirements, Variables and Logic
This paper proposes an AI-driven automated test generation framework for vehicle control units (VCUs), integrating natural language processing (NLP) and dynamic variable binding. To address the critical limitation of traditional AI-generated test cases lacking executable variables, the framework establishes a closed-loop transformation from requirements to executable code through a five-layer architecture: (1) structured parsing of PDF requirements using domain-adaptive prompt engineering; (2) construction of a multidimensional variable knowledge graph; (3) semantic atomic decomposition of requirements and logic expression generation; (4) dynamic visualization of cause–effect graphs; (5) path-sensitization-driven optimization of test sequences. Validated on VCU software from a leading OEM, the method achieves 97.3% variable matching accuracy and 100% test case executability, reducing invalid cases by 63% compared to conventional NLP approaches. This framework provides an explainable and traceable automated solution for intelligent vehicle software validation, significantly enhancing efficiency and reliability in automotive testing.
- 24 July 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (8) , 417
Open AccessAI-Driven Automated Test Generation Framework for VCU: A Multidimensional Coupling Approach Integrating Requirements, Variables and Logic
This paper proposes an AI-driven automated test generation framework for vehicle control units (VCUs), integrating natural language processing (NLP) and dynamic variable binding. To address the critical limitation of traditional AI-generated test cases lacking executable variables, the framework establishes a closed-loop transformation from requirements to executable code through a five-layer architecture: (1) structured parsing of PDF requirements using domain-adaptive prompt engineering; (2) construction of a multidimensional variable knowledge graph; (3) semantic atomic decomposition of requirements and logic expression generation; (4) dynamic visualization of cause–effect graphs; (5) path-sensitization-driven optimization of test sequences. Validated on VCU software from a leading OEM, the method achieves 97.3% variable matching accuracy and 100% test case executability, reducing invalid cases by 63% compared to conventional NLP approaches. This framework provides an explainable and traceable automated solution for intelligent vehicle software validation, significantly enhancing efficiency and reliability in automotive testing.
- Open Access
- 18 July 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (3) , 1-13
Dynamic Informed Bias RRT*-Connect: Improving Heuristic Guidance by Dynamic Informed Bias Using Hybrid Dual Trees Search
The RRT*-Connect algorithm enhances efficiency through dual tree bias growth, yet this bias can be inherently blind, potentially affecting the algorithm’s heuristic performance. In contrast, the Informed RRT* algorithm narrows the planning problem’s scope by leveraging an informed region, thereby improving convergence efficiency towards optimal solutions. However, this approach relies on the prior establishment of feasible paths. Combining these two algorithms can address the challenges posed by Informed RRT while also accelerating convergence towards optimality, albeit without resolving the issue of blind bias in dual trees.In this paper, we proposed a novel algorithm: Dynamic Informed Bias RRT*-Connect. This algorithm, grounded in potential and explicit informed bias sampling, introduces a dynamical bias points set that guides dual tree growth with precision objectives. Additionally, we enhance the evaluation framework for algorithmic heuristics by introducing two innovative metrics that effectively capture the algorithm’s characteristics. The improvements observed in traditional indicators demonstrate that the proposed algorithm exhibits greater heuristic compared to RRT*-Connect and Informed RRT*-Connect. These findings also suggest the viability of the new metrics introduced in our evaluation framework.
- 18 July 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (3) , 1-13
Open AccessDynamic Informed Bias RRT*-Connect: Improving Heuristic Guidance by Dynamic Informed Bias Using Hybrid Dual Trees Search
The RRT*-Connect algorithm enhances efficiency through dual tree bias growth, yet this bias can be inherently blind, potentially affecting the algorithm’s heuristic performance. In contrast, the Informed RRT* algorithm narrows the planning problem’s scope by leveraging an informed region, thereby improving convergence efficiency towards optimal solutions. However, this approach relies on the prior establishment of feasible paths. Combining these two algorithms can address the challenges posed by Informed RRT while also accelerating convergence towards optimality, albeit without resolving the issue of blind bias in dual trees.In this paper, we proposed a novel algorithm: Dynamic Informed Bias RRT*-Connect. This algorithm, grounded in potential and explicit informed bias sampling, introduces a dynamical bias points set that guides dual tree growth with precision objectives. Additionally, we enhance the evaluation framework for algorithmic heuristics by introducing two innovative metrics that effectively capture the algorithm’s characteristics. The improvements observed in traditional indicators demonstrate that the proposed algorithm exhibits greater heuristic compared to RRT*-Connect and Informed RRT*-Connect. These findings also suggest the viability of the new metrics introduced in our evaluation framework.
- Open Access
- 28 June 2021
- Published by MDPI AG in Algorithms
- Vol. 14 (7) , 196
Self-Adaptive Path Tracking Control for Mobile Robots under Slippage Conditions Based on an RBF Neural Network
Wheeled mobile robots are widely implemented in the field environment where slipping and skidding may often occur. This paper presents a self-adaptive path tracking control framework based on a radial basis function (RBF) neural network to overcome slippage disturbances. Both kinematic and dynamic models of a wheeled robot with skid-steer characteristics are established with position, orientation, and equivalent tracking error definitions. A dual-loop control framework is proposed, and kinematic and dynamic models are integrated in the inner and outer loops, respectively. An RBF neutral network is employed for yaw rate control to realize adaptability to longitudinal slippage. Simulations employing the proposed control framework are performed to track snaking and a DLC reference path with slip ratio variations. The results suggest that the proposed control framework yields much lower position and orientation errors compared with those of a PID and a single neuron network (SNN) controller. It also exhibits prior anti-disturbance performance and adaptability to longitudinal slippage. The proposed control framework could thus be employed for autonomous mobile robots working on complex terrain.
- 28 June 2021
- Published by MDPI AG in Algorithms
- Vol. 14 (7) , 196
Open AccessSelf-Adaptive Path Tracking Control for Mobile Robots under Slippage Conditions Based on an RBF Neural Network
Wheeled mobile robots are widely implemented in the field environment where slipping and skidding may often occur. This paper presents a self-adaptive path tracking control framework based on a radial basis function (RBF) neural network to overcome slippage disturbances. Both kinematic and dynamic models of a wheeled robot with skid-steer characteristics are established with position, orientation, and equivalent tracking error definitions. A dual-loop control framework is proposed, and kinematic and dynamic models are integrated in the inner and outer loops, respectively. An RBF neutral network is employed for yaw rate control to realize adaptability to longitudinal slippage. Simulations employing the proposed control framework are performed to track snaking and a DLC reference path with slip ratio variations. The results suggest that the proposed control framework yields much lower position and orientation errors compared with those of a PID and a single neuron network (SNN) controller. It also exhibits prior anti-disturbance performance and adaptability to longitudinal slippage. The proposed control framework could thus be employed for autonomous mobile robots working on complex terrain.
- 18 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 26 (3) , 1581-1590
An Integrated Terrain Identification Framework for Mobile Robots: System Development, Analysis, and Verification
Terrain identification is essential to autonomous control algorithm development for mobile robots. This paper proposes an integrated framework to identify terrain parameters based on inertial and driving current signals. Multiple sources are combined to reduce the instability caused by single signals. A dynamic model of the track-soil system is established as the theoretical basis of identification. All signals are processed in the time, frequency, and time-frequency domains. The features of each domain are generated by statistical methods. To analyze and select superior feature categories, a maximum-relevance and minimum-redundancy criterion based on Pearson's correlation (RRPC) is proposed to evaluate the priority of features. A probabilistic neural network (PNN) is used to identify the category of terrain. All results are analyzed with two factors, source and input, to find the most effective rule of the proposed framework. The crossing combination analysis is taken into consideration to explore all potential improvement. The results show that the driving current yields comparative identification accuracy as inertial signals. Compared to the single signal source, the method using the combined signal source can obviously improve the accuracy of terrain identification.
- 18 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 26 (3) , 1581-1590
An Integrated Terrain Identification Framework for Mobile Robots: System Development, Analysis, and Verification
Terrain identification is essential to autonomous control algorithm development for mobile robots. This paper proposes an integrated framework to identify terrain parameters based on inertial and driving current signals. Multiple sources are combined to reduce the instability caused by single signals. A dynamic model of the track-soil system is established as the theoretical basis of identification. All signals are processed in the time, frequency, and time-frequency domains. The features of each domain are generated by statistical methods. To analyze and select superior feature categories, a maximum-relevance and minimum-redundancy criterion based on Pearson's correlation (RRPC) is proposed to evaluate the priority of features. A probabilistic neural network (PNN) is used to identify the category of terrain. All results are analyzed with two factors, source and input, to find the most effective rule of the proposed framework. The crossing combination analysis is taken into consideration to explore all potential improvement. The results show that the driving current yields comparative identification accuracy as inertial signals. Compared to the single signal source, the method using the combined signal source can obviously improve the accuracy of terrain identification.