NANasir Ali

Nasir Ali

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Nasir Ali has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Aging-Informed Dynamic Graph Network for Aero-Engine RUL Prediction

    by Zeeshan Abbas, Hao Wang, Nasir Ali, Xiaobao Song, Wenming Cao

    Remaining useful life (RUL) prediction for safety-critical systems, such as aero-engines, is a fundamental challenge in prognostics and health management. While existing deep learning methods have achieved success in modeling spatiotemporal patterns, they often overlook the physical essence of system degradation: the evolution of intersensor dependencies is intrinsically driven by the aging progression. To address this, we propose aging-informed dynamic graph network for RUL prediction (AIDGN-RUL), which formulates RUL prediction as an aging-guided dynamic graph construction problem. Specifically, the model derives an aging representation from the operational cycle count and integrates it with multivariate sensor features to generate adaptive graph structures that evolve with system aging. A graph convolutional architecture is then employed to propagate information over aging-guided graph structures to obtain refined sensor representations for RUL prediction. Extensive experiments on the CMAPSS and N-CMAPSS datasets demonstrate that AIDGN-RUL significantly outperforms state-of-the-art baselines, achieving a maximum improvement of 27.83% in prognostic score and 15.94% in root mean square error (RMSE). Furthermore, the model exhibits superior robustness to sensor noise and maintains high computational efficiency, highlighting its potential for real-world industrial deployment.

  • A Novel Multifault Diagnosis Method for SRM Drives in Electrified Powertrains

    by Nasir Ali, Shuo Qu, Mehdi Narimani

    Switched reluctance motors (SRMs) are recognized as a promising technology for electrified transportation due to their fault-tolerant and rare-earth free features. In transportation applications, particularly in powertrains of the railways and aircraft, the reliability of every component in the motor drive system is of paramount importance. Existing state-of-the-art diagnostic approaches address faults in each component separately, leading to increased system complexity. Therefore, a single algorithm for real-time diagnosis of multiple component faults becomes an attractive solution. This article presents a simple yet comprehensive technique for detecting and locating nearly all potential electrical faults and current sensor faults in SRM drives at their earliest stages. The proposed diagnostic scheme can effectively identify ten failure cases, including open-circuit and short-circuit faults in power switches, power diodes, phase winding open-circuit faults, and zero-output current sensor faults. Fundamental current and modified dc-bus currents are used for developing fault features, thereby avoiding additional costs and complexity. Digital logic judgments are developed based on the measured currents for fault localization. Simulation studies and rigorous experiments are conducted on a three-phase 12/8 SRM drive system to validate the feasibility and superior performance of the diagnostic scheme.


  • Online Diagnosis of Multiple-Switch Simultaneous Faults in SRM Drives Based on Current Errors

    by Nasir Ali, Qingsong Wang, Qiang Gao, Ke Ma

    This paper presents a new online diagnostic technique for multiple power switch faults in switched reluctance motor (SRM) drives. Unlike the existing schemes, nearly all potential failure scenarios in the power switches of the standard asymmetric half-bridge converter are considered in this work. Firstly, a new current sensing scheme is proposed without modifying the standard AHB structure and the obtained current errors for current control of the drive system are analyzed for fault diagnosis. Secondly, a new fault variable is extracted from the dc-bus current, and subtests are introduced to detect and locate failure of multiple switches in a phase-leg with same or hybrid faults. Diagnosis of multi-switch faults in the same or different phases is achieved within a few sampling periods. The diagnostic capability of the proposed methods is thoroughly validated through experimental studies using a three-phase 12/8-pole SRM drive system.


  • Fault-Tolerant SRM Drives—A Review

    by Nasir Ali, Mehdi Narimani

    Fault tolerance in electric motor drives has been extensively studied due to their widespread usage in safety-critical applications, including more/all-electric aircraft and electric vehicles. Switched reluctance motors (SRMs) are renowned for their high robustness and excellent fault tolerance. However, they are not immune to faults, and a potential fault in any part of the motor drive could have serious implications for the system, even may lead to unexpected shutdown if the fault is not promptly remedied. The power converter is a key component and the most vulnerable to failure, as reported for 35% of the drive faults. Fault tolerance has typically been achieved through a combination of hardware and software reconfigurations. However, due to the simple structure of the standard asymmetrical half-bridge converter, hardware reconfiguration is more commonly used to remediate converter faults. Consequently, fault tolerance adds cost and complexity to a standard SRM drive system. This article presents an instructive survey of the recent research on fault-tolerant SRM drives. Moreover, the postfault performance, implementation costs, and fault-tolerant capabilities of advanced fault-tolerant converters are systematically quantified, evaluated and compared. Finally, the article is concluded with an investigation on the future research trends in fault tolerance in SRM drives.


  • Fast Detection of Power Transistor Faults in SRM Drives Based on Transient Pulse Injection

    by Nasir Ali, Qingsong Wang, Qiang Gao, Ke Ma

    Switched reluctance motors (SRMs) have been widely used in reliability-critical applications due to their robust rotor structure and fault-tolerance characteristics. However, power transistors in the SRM drives still suffer from various faults, such as open-circuit and short-circuit faults, which may cause unexpected shutdowns. Therefore, detection and localization of the power transistor faults in the earliest stage is of extreme importance to ensure uninterrupted operations. This paper proposes a fast fault diagnostic technique for power transistor faults in the SRM drive system. When a fault-caused abnormal current pattern is observed in the fundamental current, two complementary high-frequency (HF) pulses are injected into both power switches of the affected phase for a transient period. Through analyzing the relationship between the induced phase currents due to the injected HF pulses and the failure cases, two fault variables are introduced for faulty switch localization. Diagnosis of open-circuit and short-circuit faults in a single switch and dual switches is achieved within one period of the injected HF pulses. The fast diagnostic speed and feasibility of the proposed method for real-time implementation is verified through simulation studies and experiments based on a three-phase 12/8-pole SRM drive system.


  • Diagnosis of Multicomponent Faults in SRM Drives Based on Auxiliary Current Reconstruction Under Soft-Switching Operation

    by Nasir Ali, Qingsong Wang, Qiang Gao, Ke Ma

    Switched reluctance motors (SRMs) are considered a potential candidate for utilization in numerous safety-critical applications including electric vehicles (EVs) and more/all electric aircraft (MEA), etc., where the reliability of the drive system is critically important. An SRM drive system suffers from various electrical, mechanical, and sensor faults during operation. The existing fault detection schemes investigated each fragile component separately and proposed different approaches for each fault, which not only make the system complex but also less reliable for real-time implementation in safety-critical applications. Thus, a more sophisticated algorithm to detect and discriminate each of these faults in real time becomes attractive. A simple fault detection and isolation scheme for multiple faults in SRM drive systems is reported in this paper. The investigated faults include open- and short-circuit faults in power switches, open-phase winding, and zero-output current sensors faults. An auxiliary phase current for each phase was reconstructed from the dc-link and the faults are identified and discriminated effectively through the digital analysis of the fundamental current and the auxiliary current in real-time. The feasibility of the proposed scheme is verified by the extensive simulation and experiments conducted on a three-phase 12/8 SRM drive system.


  • Power Converter Fault Detection and Isolation Using High-Frequency Voltage Injection in Switched Reluctance Motor Drives for Automotive Applications

    by Nasir Ali, Qiang Gao, Pavel Sovicka, Pavol Makys, Marek Stulrajter, Ke Ma

    Exceptional robust configuration and fault tolerance capabilities make switched reluctance motors (SRMs) a promising technology for automotive applications. Nevertheless, the power transistors in a power converter of an SRM drive are well–considered more vulnerable, compared to the SRM itself. Therefore, accurate and early stage fault detection is crucial for such safety-critical applications. This paper investigates the usage of high-frequency (HF) signal injection for real-time fault identification and localization of power transistors in SRM drives. Unlike the existing diagnostic schemes that often use extra current/voltage sensors and complex algorithms, this simple method injects a sinusoidal HF voltage signal into a standard asymmetrical half-bridge converter-fed SRM. Then the induced HF current is filtered from the fundamental current and its frequency is estimated in real-time for fault localization. Typical power transistor faults (open-circuit and short-circuit) and their location can be effectively detected in the earliest stage by monitoring the variations in the filtered HF signal as well as the fundamental current with the occurrence of the faults. The effectiveness of the proposed diagnostic strategy is validated by thorough simulation and experimental results carried out on a three–phase 12/8 SRM drive system.


  • Structural and Optical Properties of Zirconia Thin Films

    by Nasir Ali, Mahwish Bashir, Shafaq Batool, Saira Riaz, Shahzad Naseem