Chang-Deuk Eom

The Journal of the Korean Wood Science and Technology (JKWST) launched in 1973 as an official publication of the Korean Society of Wood Science and Technology has been served as a core of knowledges on wood science and technology.

Volatile organic compounds (VOCs) are highly volatile chemicals in natural and anthropogenic environments, significantly affecting indoor air quality. Major sources of indoor VOCs include emissions from building materials, furnishings, and consumer products. Natural wood products release VOCs, including terpenes and aldehydes, which exert diverse health effects ranging from mild respiratory irritation to severe outcomes, such as formaldehyde-induced carcinogenicity. The temporal dynamics of VOC emissions were investigated, and the toxicological and physiological effects of the VOCs emitted by two types of natural wood, Korean Red Pine (Pinus densiflora) and Japanese Cypress (Chamaecyparis obtusa), were evaluated. Using female C57BL/6 mice as an animal model, the exposure setups included phytoncides, formaldehyde, and intact wood samples over short- and long-term durations. The exposure effects were assessed using oxidative stress markers, antioxidant enzyme activity, hepatic and renal biomarkers, and inflammatory cytokine profiles. Long-term exposure to Korean Red Pine and Japanese Cypress wood VOCs did not induce significant pathological changes. Japanese Cypress exhibited more distinct benefits, including enhanced oxidative stress mitigation, reduced systemic toxicity, and lower pro-inflammatory cytokine levels compared to the negative control group, attributable to its more favorable VOC emission profile. These findings highlight the potential health and environmental benefits of natural wood VOCs and offer valuable insights for optimizing timber use, improving indoor air quality, and informing public health policies.

Wood, as a natural material that stores carbon, is gaining increasing attention and has potential for use in interior architectural applications. Given the long indoor stay time characteristic of modern society, it is important to scientifically understand the effects of indoor wood application on the occupants. In this study, three residential buildings with an identical area and structure were constructed with different degrees of wood coverage (0%, 45%, 90%) using Larix kaempferi. Subsequently, indoor air quality (IAQ) evaluations and relative humidity measurements were conducted to assess the physical and chemical changes in each environment. The IAQ in wooden and non-wooden environments met the recommended IAQ standards established in South Korea. The results of the 8-month observation showed that, the higher the wood coverage ratio, the more the indoor humidity fluctuations were alleviated, and, in the case of the 90% wood coverage ratio condition, the humidity was maintained 5.2% lower in the summer and 10.9% higher in the winter compared to the 0% condition. To further assess the physiological responses induced by the wooden environment, the heart rate variability (HRV) was measured and compared for 26 participants exposed to each environment for two hours. In environments with a 0% and 90% degree of wood coverage, no statistically significant differences were found in the participants’ HRV indicators. But, in the group exposed to the 45% wooden environment, the results showed an increase in HRV indicators, natural logarithm of high frequency power (lnHF): 4.87 → 5.40 (p < 0.05), and standard deviation of normal-to-normal intervals (SDNN): 30.57 → 38.48 (p < 0.05), which are known indicators of parasympathetic nervous system activation.

Plywood and particle boards, commonly used in construction and interior environments, are sources of indoor chemical emissions from synthetic adhesives, resins, and surface treatments. Among these, formaldehyde, classified as a group 1 carcinogen by the International Agency for Research on Cancer, and other compounds are associated with oxidative stress, inflammation, and organ toxicity. This study aimed to evaluate the toxicological and physiological effects of plywood and particleboard emissions in female C57BL/6 mice. The mice were exposed to formaldehyde, phytoncides, and untreated wood samples under short- (30–60 days) and long-term (120–180 days) conditions. Biological effects were assessed through histopathology of major organs, differential white blood cell counts, oxidative stress markers, antioxidant enzyme activities (catalase and glutathione peroxidase), liver and kidney function tests (alanine aminotransferase, aspartate aminotransferase, blood urea nitrogen, and creatinine), and inflammatory cytokine profiling (interferon-gamma, tumor necrosis factor-α, interleukin (IL)-10, and IL-12p70). These findings revealed no significant pathological changes or systemic toxicity following long-term exposure. Minor elevations in hepatic and renal biomarkers were observed but remained within physiological limits. Antioxidant responses and cytokine fluctuations suggested mild adaptive and immunomodulatory effects. These results highlight the importance of reducing emissions from engineered wood products to improve indoor air quality and minimize potential health risks.

This study was conducted to determine the correlation between the mass loss (ML) of wood due to thermal modification and the equilibrium moisture content (EMC) of thermally modified wood. After thermal modification of larch lumber under various temperature and time conditions, ML according to treatment temperature and time was measured, and the (EMC) of the thermally modified wood was evaluated for each treatment condition. As the treatment temperature increased and the treatment time became longer, the ML of wood due to thermal modification increased. In addition, as the treatment temperature increased, the difference in EMC between the non-treated wood and the thermally modified wood tended to increase. Finally, a robust logarithmic correlation was observed between the ML due to thermal modification and the EMC of the thermally modified wood. These results suggest that the EMC of thermally modified wood can be predicted by simply measuring the weight of wood before and after thermal modification.

A model-fitting method at a single heating rate (10 °C·min-1) was used to investigate the thermal kinetic characteristics of torrefied woody biomass. The kinetic parameters were examined for pine, oak, and bamboo samples with the order of the reaction set ranging from 0.1 to 0.5 and 1.0. Based on the thermogravimetric, derivative thermogravimetric, and derivative2 thermogravimetric curves obtained, the ranges at which substantial hemicellulose and cellulose pyrolysis occurs were set as the analysis range, and the kinetic parameters of each species were analyzed. The activation energy and pre-exponential factor were obtained at these analytical ranges using two differential methods (Friedman and Chatterjee-Conard) and an integral method (Coats-Redfern). Although there were numerical differences between the results of the differential and integral methods, the thermal properties of each sample exhibited a consistent trend. Softwood was found to have the highest reactivity and intermolecular collisions per unit weight during thermal decomposition. In the case of the torrefied oak and torrefied bamboo, considering that the carbon content and fixed carbon content were approximately 24% to 25% higher than the softwood, it is appropriate to consider the thermal characteristics of each species for producing a solid fuel based on the application.

The importance of wooden buildings has been highlighted in recent years due to the energy-efficient and carbon storage effect of wood. This study investigates the willingness to pay for one-time tax payments of the citizens currently living in Seoul when Seoullo uses wood as a material for covering the surface of the facilities. The study examines the economic feasibility of Seoullo, which is a part of the government urban regeneration project that built a park on the desolate bridge in 2017. The result indicates that Seoul citizens who participated in the survey feel a greater preference for wood material rather than existing concrete used in Seoullo despite the tax burden. As a result, it is found that the respondents with children under the age of 8, respondents who are aware of the urban regeneration project, and respondents with respiratory disease have a lower marginal willingness to pay than those in the opposite groups. Moreover, the result shows that the respondents who consider farming or returning to rural areas, respondents in need of city improvement, respondents who chose wood as a preferred building material, and respondents with the experience of visiting Seoullo have a greater marginal willingness to pay for the wooden material than those in the opposite groups.

In a previous study, we demonstrated the anti-inflammatory activity of the essential oil extracted from Korean pine (Pinus koraiensis, Sieb. et Zucc.) wood. This study aims to investigate the active anti-inflammatory constituents of P. koraiensis oil. The essential oil was extracted from P. koraiensis wood by hydrodistillation and was divided into six fractions (A–F) through fractional distillation. Then, the anti-inflammatory activities of the fractions (A–F) were determined. Fractions A and F markedly downregulated the production of pro-inflammatory cytokines as well as the secretion of β-hexosaminidase in lipopolysaccharide (LPS)-stimulated RBL-2H3 cells. The main constituents of the active anti-inflammatory A and F fractions were (+)-α-pinene, (−)-β-pinene, (+)-α-terpineol, 3-carene, (+)-limonene, and longifolene. These six single compounds decreased the expression of inflammatory-related genes (i.e., IL-4 and IL-13) as well as the secretion of β-hexosaminidase in LPS-stimulated RBL-2H3 cells. (+)-α-Pinene, (−)-β-pinene, (+)-α-terpineol, and longifolene exhibited the strongest effects; these effects were comparable to those of the positive control (i.e., dexamethasone). The findings indicate that the interactions between these components exhibit potential for the management and/or treatment of inflammatory conditions as well as base structures for the development of novel anti-inflammatory drugs.