Tianyu Pu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tianyu Pu has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Feifei Bu
Nanjing University of Aeronautics and Astronautics
3 shared publications - Chris Gerada
University of Nottingham
2 shared publications - Michele Degano
University of Nottingham
2 shared publications - Beijia Ma
Center for More-Electric-Aircraft Power System, the Key Laboratory of New Energy Generation and Power Conversion of Jiangsu Province, Nanjing University of Aeronautics and Astronautics, Nanjing, China
1 shared publication - Conggan Ma
Harbin Institute of Technology-Weihai, Weihai, China
1 shared publication - Lin Zhu
Center for More-Electric-Aircraft Power System, the Key Laboratory of New Energy Generation and Power Conversion of Jiangsu Province, Nanjing University of Aeronautics and Astronautics, Nanjing, China
1 shared publication
Latest Publications
- 23 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (3) , 2339-2347
Analysis and Performance of Five-Phase Piecewise-Random-Switching-Frequency Space Vector Pulse Width Modulation
In order to better address the problem of many high-order harmonics' concentration in the output voltage, a novel five-phase piecewise-random-switching-frequency space vector pulse width modulation (PRSF-SVPWM) strategy is proposed for a five-phase voltage source inverter. Compared to the conventional random switching frequency SVPWM (RSF-SVPWM), the entire fundamental period of this method is divided into two half-fundamental periods, so the original switching frequency in a single fundamental period is randomized in segments respectively. During this process, parameters named the offset frequency and random frequency are defined and assigned reasonably. In this way, high-frequency harmonics in one period are spread into a wider range. Subsequent simulation and experimental results verify that the proposed random modulation strategy can further reduce amplitudes of harmonics near switching frequency and its integer multiples, even though within a narrow switching frequency range, and a satisfactory effect of high-order harmonic dispersion is finally obtained, which contributes to the application and popularization of random pulse width modulation strategies.
- 23 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (3) , 2339-2347
Analysis and Performance of Five-Phase Piecewise-Random-Switching-Frequency Space Vector Pulse Width Modulation
In order to better address the problem of many high-order harmonics' concentration in the output voltage, a novel five-phase piecewise-random-switching-frequency space vector pulse width modulation (PRSF-SVPWM) strategy is proposed for a five-phase voltage source inverter. Compared to the conventional random switching frequency SVPWM (RSF-SVPWM), the entire fundamental period of this method is divided into two half-fundamental periods, so the original switching frequency in a single fundamental period is randomized in segments respectively. During this process, parameters named the offset frequency and random frequency are defined and assigned reasonably. In this way, high-frequency harmonics in one period are spread into a wider range. Subsequent simulation and experimental results verify that the proposed random modulation strategy can further reduce amplitudes of harmonics near switching frequency and its integer multiples, even though within a narrow switching frequency range, and a satisfactory effect of high-order harmonic dispersion is finally obtained, which contributes to the application and popularization of random pulse width modulation strategies.
- 3 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (1) , 160-174
Speed Ripple Reduction of Direct-Drive PMSM Servo System at Low-Speed Operation Using Virtual Cogging Torque Control Method
This paper presents a virtual cogging torque (VCT) control method to reduce the speed ripple of direct-drive permanent magnet synchronous machine (DD-PMSM) servo system under low-speed conditions. Compared with other factors, at low speeds, the cogging torque is the main factor that deteriorates the drive performance, even induces speed oscillations. Especially in this paper, due to volume limitation, the cogging torque is designed larger than normal one in order to remove the need of brake. Based on the model of PMSM, the cause and effect of the cogging torque are analyzed. Inspired by the characteristic of cogging torque, the VCT control method is proposed and investigated to significantly reduce the speed ripple at low speeds. The main idea of this proposed control method is to produce a proper virtual cogging torque and continuously move the corresponding virtual stable equilibrium point to drive the rotor smoothly. In addition to the principle of this control method, its analysis and implementation are studied as well. Simulation and experimental results from the prototype demonstrate that the proposed control method is correct and valid, and it is simple and effective to smooth the speed at low-speed operations.
- 3 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (1) , 160-174
Speed Ripple Reduction of Direct-Drive PMSM Servo System at Low-Speed Operation Using Virtual Cogging Torque Control Method
This paper presents a virtual cogging torque (VCT) control method to reduce the speed ripple of direct-drive permanent magnet synchronous machine (DD-PMSM) servo system under low-speed conditions. Compared with other factors, at low speeds, the cogging torque is the main factor that deteriorates the drive performance, even induces speed oscillations. Especially in this paper, due to volume limitation, the cogging torque is designed larger than normal one in order to remove the need of brake. Based on the model of PMSM, the cause and effect of the cogging torque are analyzed. Inspired by the characteristic of cogging torque, the VCT control method is proposed and investigated to significantly reduce the speed ripple at low speeds. The main idea of this proposed control method is to produce a proper virtual cogging torque and continuously move the corresponding virtual stable equilibrium point to drive the rotor smoothly. In addition to the principle of this control method, its analysis and implementation are studied as well. Simulation and experimental results from the prototype demonstrate that the proposed control method is correct and valid, and it is simple and effective to smooth the speed at low-speed operations.
- 16 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (5) , 3323-3332
Performance and Evaluation of Five-Phase Dual Random SVPWM Strategy With Optimized Probability Density Function
This paper presents a five-phase dual random space vector pulse width modulation (FPDR-SVPWM) strategy with an optimized probability density function (PDF) for a five-phase voltage-source inverter, and its performance and evaluation are also analyzed. Based on the Nearest Four Vectors modulation method, the FPDR-SVPWM strategy, combined with random switching frequency and random zero vector, is investigated to significantly reduce the amplitude of high-order harmonics near the switching frequency and its integer multiples. For non-sinusoidal power supply, third harmonic injection is introduced in this modulation strategy as well. Considering the effect of random numbers on the performance, an optimized Beta distribution is studied in detail. In order to analyze harmonic dispersion degree qualitatively and quantitatively, the power spectral density and the harmonic spread factor are both employed to assess the performance of the FPDR-SVPWM strategy. A series of results of simulation in Matlab and experiments based on Field Programmable Gate Array (FPGA) demonstrate that the proposed modulation strategy is correct and valid, and it distributes high-order harmonics into a wide range without affecting the fundamental wave and third harmonic.
- 16 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (5) , 3323-3332
Performance and Evaluation of Five-Phase Dual Random SVPWM Strategy With Optimized Probability Density Function
This paper presents a five-phase dual random space vector pulse width modulation (FPDR-SVPWM) strategy with an optimized probability density function (PDF) for a five-phase voltage-source inverter, and its performance and evaluation are also analyzed. Based on the Nearest Four Vectors modulation method, the FPDR-SVPWM strategy, combined with random switching frequency and random zero vector, is investigated to significantly reduce the amplitude of high-order harmonics near the switching frequency and its integer multiples. For non-sinusoidal power supply, third harmonic injection is introduced in this modulation strategy as well. Considering the effect of random numbers on the performance, an optimized Beta distribution is studied in detail. In order to analyze harmonic dispersion degree qualitatively and quantitatively, the power spectral density and the harmonic spread factor are both employed to assess the performance of the FPDR-SVPWM strategy. A series of results of simulation in Matlab and experiments based on Field Programmable Gate Array (FPGA) demonstrate that the proposed modulation strategy is correct and valid, and it distributes high-order harmonics into a wide range without affecting the fundamental wave and third harmonic.