ZSZhuang Shao

Zhuang Shao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhuang Shao has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Nonintrusive Current Monitoring for Power Grids: An End-to-End Framework From Data Acquisition to Waveform Reconstruction

    by Zhuang Shao, Yumei Wen, Ping Li, Bin Cui

    Current monitoring of ubiquitous nodes in power grids is becoming increasingly important as the global trend accelerates toward digitization. Nonintrusive current monitoring using passive wireless systems offers a promising approach to avoid issues, such as the complexities of deployment considering insulation requirements in wired solutions and the battery maintenance inconveniences encountered in the existing wireless solutions. However, the limited energy in passive wireless sensing nodes shortens the length of the collected sensing data, leading to challenges in reconstructing the physical information, especially when the nonlinearity of the sensors is unignorable. Here, in this article, we present an end-to-end framework on top of the developed passive wireless sensing system, spanning from sensing data acquisition to current waveform reconstruction. By exploiting the nonquadratic features of the sensor, the nonlinearity-caused lost polarity of the bipolar current-induced magnetic field in the sensing data is recovered using a bidirectional long short-term memory (LSTM) model, which further achieves the current waveform reconstruction as a nonlinear regression. Moreover, the synchronization of the sensing data and its ground truth current waveform are performed by phase estimation using polynomial fitting on the sensing data, addressing the model training challenges caused by the asynchrony between the two because of the passive wireless sensing mechanism. Experimental results show that the quoted errors of the current waveform reconstruction are within 0.68%, and the normalized correlation coefficients are above 0.99991. Our work provides a promising comprehensive solution to enable the evolution of the power grid to complete digitalization. It can be extended further to other physical quantity monitoring applications, empowering global digital intelligence.


  • Hole Inpainting Algorithm for Half-Organized Point Cloud Obtained by Structured-Light Section System

    by Bin Cui, Zhuang Shao, Wei Tao, Hui Zhao

    The advances in sensors and data processing technologies enrich the types of 3D point clouds acquirement, empowering numerous extensive and novel applications such as 3D reconstruction in various scenarios. However, the hole defects affect the accuracy and fidelity of the acquired point clouds, hindering further development and application of 3D point clouds. Aiming at the hole defects in point clouds, a Bayesian hole inpainting algorithm for the half-organized point cloud is proposed, where the point cloud is obtained by a structured-light section system. The algorithm establishes a Bayesian probability model in the hole region, which adopts specific distributions of the point cloud to estimate the maximum likelihood parameter. Simulation and experimental results show that the proposed approach outperforms other competing algorithms significantly in repairing various types of holes, both in objective and subjective qualities. In addition, the proposed algorithm has better scalabilities in the cases of wrong topology definition and self-intersection confusion. This is the first algorithm specially designed for hole inpainting in half-organized point clouds, which maximizes the comprehensive consideration of local features and global optimization, supplemented by targeted prior knowledge of density, Riemannian manifold, and discrete attributes.


  • WiSensor: Passive Sensor Data Transmission by Way of Ambient Wi-Fi Channels

    by Xiaochen Feng, Yumei Wen, Zhuang Shao, Guoda Wang, Ping Li, Yao Wang, Tao Han, Xiaojun Ji

    Recent developments in wireless sensor networks have empowered low-power, intelligent sensor nodes to be distributed over a large area. However, wireless sensor nodes that actively emit electromagnetic waves for energy-hungry communication are limited by the volumes and capacities of batteries, requiring periodic maintenance in widespread applications. To solve this problem, we propose a passive wireless sensor platform, WiSensor, which makes wireless sensor nodes take use of ambient Wi-Fi waves instead of actively emitting electromagnetic waves to transmit sensor data. By affecting the Wi-Fi channels through backscattering, the sensor node modulates the sensor data onto the Wi-Fi channels established by a Wi-Fi transmitting node and a Wi-Fi receiving node. The receiving node acts as the sensor receiver and the sensor data are extracted from the Wi-Fi channel state information. We define the signal-to-noise ratio at the sensor data receiver and analyze the WiSensor performance dependencies, providing guidance for the system design and implementation. A prototype of WiSensor is established, in which sensor data can be transmitted at 200 bps with a bit error rate of 0.01% while the sensor node is placed as far as 5 m from the Wi-Fi transmitting node and 2 m from the Wi-Fi receiving node at 2.37- $\mu \text{W}$ power consumption for the wireless connection. WiSensor is a novel and general wireless sensor platform that embeds the utilization of Wi-Fi channels to practical sensing tasks without the need for wireless sensor nodes to follow Wi-Fi protocols, empowering ubiquitous commodity Wi-Fi devices in our daily life with general sensor connectivity. We believe WiSensor demonstrates promising potential in the field of next-generation smart homes and other applications that urgently require ultralow-power sensor data transmission.


  • Passive Distributed Sensor Array Using Multiple RF Sensing Tags

    by Zhuang Shao, Yumei Wen, Ping Li, Guoda Wang, Yao Wang, Tao Han, Xiaojun Ji

    Radio-frequency (RF) sensing tags are emerging as the next-generation paradigm toward gathering context-awareness information related to all objects’ physical phenomena for the future Internet of Things (IoT). However, the most attention has been given to realize the sensing functions of a single tag rather than the mutual influences among adjacent tags. It has been found that when multiple RF sensing tags are deployed adjacently, these tags may fail to function properly. Therefore, motivated by the common requirements of deploying multiple RF sensing tags in the IoT, the mutual influences among tags are analyzed. We believe that the mutual impedance of tag antennas, which changes with the antenna separations among adjacent RF sensing tags, affects the wireless links between the tags and reader. The mutual impedance is analyzed using the method of moments and is substituted into forward and backward links. The calculation results show that the influence of the antenna mutual impedance on the RF sensing tag takes the wavelength of RF waves as the period, fluctuates, and gradually diminishes as the separations between antennas increase. To validate the analysis, a sensor array is formed using multiple RF sensing tags integrated with magnetic sensors. The experimental results show that once the antenna separations between the tags exceed 1.5 wavelengths, the backscattering sensing data can be decoded, and the interrogation success rates reach 100%. Numerous sensor arrays can be deployed ubiquitously with convenience, providing a clustered solution toward distributed sensing for the IoT.


  • Cable Current Detection With Passive RF Sensing Tags

    by Zhuang Shao, Yumei Wen, Zhuangzhuang Xu, Leixiang Bian, Ping Li, Guangjun Wen, Zhenbing Li, Gang Li, Yao Wang, Tao Han, et al.

    Cable current detection plays a vital role in power grids toward improving transmission efficiency, relieving power congestion, and ensuring grid reliability. However, the sensors in existing current detection systems either are wired with measurement instruments or are wireless yet require batteries, which is inconvenient for monitoring overhead powerlines. Inspired by RF sensing tags, which are widely used for applications such as temperature and humidity measurements, in this article, we propose a distinctive cable current detection system that can avoid the constraint of wires and batteries. By detecting the ambient magnetic field produced by ac current flowing through a cable, the proposed system realizes a minimal measurement range of 5–17.5 A at 50/60 Hz with a maximum wireless distance of 5.2 m. This prototype can detect cable current with an extendable measurement range, providing a promising strategy for passive and wireless current detection.