MSMarco Stecca

Marco Stecca

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marco Stecca has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Hybrid Space Vector Modulation Scheme for the Multiport Hybrid Converter

    by Marco Stecca, Ahmed Abdelhakim, Thiago Batista Soeiro, Francisco Canales, Pavol Bauer, Peter Palensky

    This work proposes a hybrid space vector modulation (HSVM) scheme for Multiport Hybrid Converters (MHCs). Moreover, the impact of shifting the auxiliary currents from the main ones is proposed and investigated in order to enhance the converter efficiency. The proposed operational schemes have been implemented in a three-phase 5 kW MHC prototype. It is shown that the proposed HSVM scheme can improve the MHC efficiency by 0.3% at full load with respect to space vector modulation. At partial loads, the improvement is even more significant, reaching +0.7% at 30% of the rated power. A further 0.15% increase in efficiency at full power can be achieved by a 180$^{\circ }$ phase-shifting of the auxiliary currents with respect to the main terminal currents, reaching a peak efficiency of 98.5%.


  • Multiport Hybrid Converter for Electrified Transportation Systems

    by Ahmed Abdelhakim, Thiago Batista Soeiro, Marco Stecca, Francisco Canales

    Compact and efficient power converter solutions are seen to be the backbone of future transportation systems in order to cope with the ongoing transition toward greener systems. Such systems usually comprise a main load section, in which one or more propulsion or traction motors are connected, in addition to an auxiliary load, which might comprise the hotels and air conditioning for example. This auxiliary load can be as low as 5–10% of the main load power. Therefore, it can be challenging to drive this power from a typical high-power system that employs a medium-voltage (MV) dc (MVDC) grid, which is typical in high-power systems. In such MVDC-integrated systems, neutral-point-clamped and active neutral-point-clamped (ANPC) converters are commonly used, where the auxiliary load converter is overrated in this case, resulting in a bulky and inefficient power system. Thus, in order to enable a lighter and efficient transportation power system, a multiport hybrid converter (MHC) is presented in this article. This converter can feed the main MV motor, in addition to two auxiliary low-voltage loads. Compared with the state-of-the-art ANPC converter, the proposed MHC utilizes only two extra switches per phase leg in order to achieve this multiport operation along with increasing the voltage rating of another two switches. The proposed MHC is analyzed in this article, where its operation, modulation, and mathematical derivation are presented. These analyses are supported by simulation and experimental results utilizing a reduced-scale 5-kW system.


  • Battery Storage System as Power Unbalance Redistributor in Distribution Grids Based on Three Legs Four Wire Voltage Source Converter

    by Marco Stecca, Thiago Batista Soeiro, Anand Krishnamurthy Iyer, Pavol Bauer, Peter Palensky

    This paper discusses the application of Battery Energy Storage Systems (BESSs) as power redistributors in three-phase distribution grids as an add-on functionality to typical BESS applications, such as congestion management and energy arbitrage. Combining those ancillary services into a single power unit is not yet performed in practice but may constitute an emerging business opportunity to increase the BESS revenues. The unbalanced operation of the BESS voltage source converter (VSC) leads to the circulation of low-frequency current harmonics in the DC-link through the capacitors and battery cells. Therefore, it is particularly interesting whether relatively large 50Hz and 100Hz currents can safely circulate within these components. Analytical modeling and design guidelines for the DC-link of a three-leg four-wire two-level VSC operating under unbalanced loads are detailed. Furthermore, a low power VSC prototype is used to demonstrate the working principle of the BESS, providing power unbalance redistribution and symmetric power exchange. Additionally, the ICR18650-26F Lithium-ion cells are cycled to reach end-of-life with different current profiles and C-ratings. The analysis shows that charging with a 100Hz ripple superimposed to the DC current leads to a 10% increment in degradation.


  • Open Access

    Optimal Battery Energy Storage Dispatch in Energy and Frequency Regulation Markets While Peak Shaving an EV Fast Charging Station

    by Luca Argiolas, Marco Stecca, Laura M. Ramirez-Elizondo, Thiago Batista Soeiro, Pavol Bauer

    Battery Energy Storage Systems typically procure their primary revenues from regulated energy and ancillary services markets; nonetheless, they have great potential in supporting distribution network operators and their users. This paper evaluates the potential business case of battery storage systems integrating market application and services to a photovoltaic assisted electric vehicle fast-charging station. A mathematical deterministic optimization problem is formulated using mixed-integer linear programming to combine battery storage system operation in the day-ahead and frequency regulation market and the remunerated services offered to the charging station. The technical and economic feasibility of the solution and the applicability of the proposed framework is verified through a case study reflecting an existing photovoltaic assisted charging station in the Netherlands and considering the Dutch energy market framework and prices. The study shows that such battery storage system implementation is economically and technically advantageous for the players involved. The battery storage system can stack additional revenues on top of the market revenues. The charging station benefits from a reduced peak power and a 30% tariff reduction, and the system operator would indirectly benefit from the shaved charging station profile. Furthermore, the analysis shows that providing services to the charging station from the battery storage system does not significantly impact its market-related revenues.


  • Hybrid Si/SiC Switch Modulation With Minimum SiC MOSFET Conduction in Grid Connected Voltage Source Converters

    by Marco Stecca, Changyu Tan, Junzhong Xu, Thiago Batista Soeiro, Pavol Bauer, Peter Palensky

    In this paper a hybrid Si/SiC switch (HyS) modulation with minimum SiC MOSFET conduction (mcHyS) is experimentally characterized so to derive its conduction and switching performance. These are later used to derive a silicon area analytical model for the HyS configuration. The chip area model is used to benchmark the mcHyS modulation concepts against single technology switches and typical HyS modulation, when considering the implementation of a 100 kW two-level Voltage Source Converter (VSC) deployed for three industrial applications: photovoltaic inverter, electric vehicle fast-charging station, and battery storage systems for grid ancillary service. The two additional switching events of the SiC MOSFET, which differentiate the mcHyS modulation from the typical HyS one, are proven to happen in soft switching, therefore the mcHyS switching performances are not penalized. Furthermore, the analysis presented shows how the studied mcHyS modulation performs against the single semiconductor technology and the typical HyS solution, in terms of cost and power conversion efficiency. More specifically, it is shown that the HyS solutions are particularly competitive versus the full Si-based VSCs when the application at hand often operates at low partial loads. Finally, a 10kW two-level VSC assembled with mcHyS is tested so to compare its efficiency versus single technology switches.


  • Optimal Periodic Variable Switching PWM for Harmonic Performance Enhancement in Grid-Connected Voltage Source Converters

    by Yang Wu, Junzhong Xu, Thiago Batista Soeiro, Marco Stecca, Pavol Bauer

    Variable switching frequency PWM (VSFPWM) modulation can be advantageously implemented in industrial applications, such as renewable energy, motor drives, and uninterrupted power supply (UPS) systems, to reduce the injected current harmonic amplitudes, to suppress audible noise, and to improve semiconductor power efficiency. In this article, the usage of periodic VSFPWM methods in a voltage source converter (VSC) is proposed, analyzed, and benchmarked in terms of harmonic spectrum spreading, following the IEEE-519 current harmonic standard for the connection to the distribution grid. Particular attention is paid to the influence of VSFPWM on the ac filter design. First, the analytical model of the voltage harmonic spectrum generated by a three-phase three-wire two-level VSC implementing several periodic VSFPWM methods is derived. Subsequently, a design guideline for the commonly used LCL filter in the grid-tied VSC application is proposed, which minimizes the size requirement of the necessary components. The voltage spectrum models of the proposed VSFPWM method and the optimal switching profiles are verified by MATLAB/Simulink simulations and a 5-kW three-phase two-level VSC hardware demonstrator. The study shows that the ac filter power density for the studied VSFPWM methods can be greatly increased when compared with the conventional and widely employed constant switching frequency continuous PWM strategies.


  • Open Access

    Lifetime Estimation of Grid-Connected Battery Storage and Power Electronics Inverter Providing Primary Frequency Regulation

    by Marco Stecca, Thiago Batista Soeiro, Laura Ramirez Elizondo, Pavol Bauer, Peter Palensky

    Battery Energy Storage Systems (BESSs) are a new asset for Primary Frequency Regulation (PFR). PFR consists of varying the generator's power output proportionally to the frequency deviations, so to preserve the grid stability. The implementation and remuneration of PFR are determined by the system operators. However, assessing the revenue stream is not enough to define the business case, as also the components' lifetime has to be estimated. Previous studies of lifetime estimation for BESSs performing PFR considered only the electrochemical storage, disregarding the power electronics. Nonetheless, researchers have shown the importance of estimating power electronics wear due to the operation when applied in renewable energy generation and microgrid. This paper presents a lifetime analysis of BESSs providing PFR considering IGBT modules, electrolytic capacitors and electrochemical storage degradation. The lifetime information are used to estimate BESS's Net-Present-Value (NPV), therefore evaluating the benefits of deploying power electronics based BESS in the grid. A comparison between different countries, Germany, Netherlands, and UK, is performed, considering the PFR implementation and remuneration differences. The analysis shows that the BESS management strategy can extend its lifetime and that the component that exhibits the shortest lifetime is the electrochemical storage. In conclusion, the provision of PFR by means of BESS has been found to be profitable.


  • Top Cited Papers
    Open Access

    A Comprehensive Review of the Integration of Battery Energy Storage Systems into Distribution Networks

    by Marco Stecca, Laura Ramirez Elizondo, Thiago Batista Soeiro, Pavol Bauer, Peter Palensky

    Recent developments in the electricity sector encourage a high penetration of Renewable Energy Sources (RES). In addition, European policies are pushing for mass deployment of Electric Vehicles (EVs). Due to their non-controllable characteristics, these loads have brought new challenges in distribution networks, resulting in increased difficulty for Distribution System Operators (DSOs) to guarantee a safe and reliable operation of the grid. Battery Energy Storage Systems (BESSs) are promising solutions for mitigating the impact of the new loads and RES. In this paper, different aspects of the BESS's integration in distribution grids are reviewed. At first, the physical layer will be considered, focusing on the main battery technologies commercially available and on the power electronics converter. Secondly, the different functionalities that a grid-connected BESS can provide will be investigated, and then its sizing, location and control in distribution network will be discussed. In addition, an overview of actual BESSs installations is given. All in all, this paper aims at providing a comprehensive view of BESSs integration in distribution grids, highlighting the main focus, challenges, and research gaps for each one of these aspects.