FGFrancesco Grella

Francesco Grella

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Francesco Grella has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Generating Whole-Arm Avoidance Motion Through Localized Proximity Sensing

    by Simone Borelli, Francesco Giovinazzo, Alessandro Albini, Francesco Grella, Giorgio Cannata

    This article presents a novel control algorithm for robotic manipulators in unstructured environments using proximity sensors partially distributed on the platform. The proposed approach exploits arrays of multizone Time-of-Flight (ToF) sensors to generate a sparse point cloud representation of the robot’s surroundings. By employing computational geometry techniques, we fuse the knowledge of robot’s geometric model with ToFs sensory feedback to generate whole-arm motion tasks. This allows to move both sensorized and nonsensorized links in response to unpredictable events such as moving obstacles. In particular, the proposed algorithm computes the pair of closest points between the environment cloud and the robot links, generating a reactive avoidance motion that is implemented as the highest priority task in a two-level hierarchical architecture. The algorithm allows the robot to move safely in unstructured environments, even without complete sensorization over the whole surface. Experimental validation demonstrates the algorithm’s effectiveness in different operating scenarios, achieving comparable performances with respect to well established control techniques that rely on large area sensing architectures. We validate the approach on a human–robot interaction task involving 20 participants. In addition, we carry out a computational load analysis of the proposed algorithms. Our approach shows improvements in the distance margin between the robot and the environment up to 100 mm, due to the rendering of virtual avoidance tasks on nonsensorized links.


  • Prioritized Task Transition in Physical Interaction with Mobile Manipulators

    by Pedro Luis Figueroa Saire, Francesco Grella, Giorgio Cannata

  • Open Access

    Generating Whole-Body Avoidance Motion through Localized Proximity Sensing

    by Simone Borelli, Francesco Giovinazzo, Francesco Grella, Giorgio Cannata

    This paper presents a novel control algorithm for robotic manipulators in unstructured environments using proximity sensors partially distributed on the platform. The proposed approach exploits arrays of multi zone Time-of-Flight (ToF) sensors to generate a sparse point cloud representation of the robot surroundings. By employing computational geometry techniques, we fuse the knowledge of robot geometric model with ToFs sensory feedback to generate whole-body motion tasks, allowing to move both sensorized and non-sensorized links in response to unpredictable events such as human motion. In particular, the proposed algorithm computes the pair of closest points between the environment cloud and the robot links, generating a dynamic avoidance motion that is implemented as the highest priority task in a two-level hierarchical architecture. Such a design choice allows the robot to work safely alongside humans even without a complete sensorization over the whole surface. Experimental validation demonstrates the algorithm effectiveness both in static and dynamic scenarios, achieving comparable performances with respect to well established control techniques that aim to move the sensors mounting positions on the robot body. The presented algorithm exploits any arbitrary point on the robot surface to perform avoidance motion, showing improvements in the distance margin up to 100 mm, due to the rendering of virtual avoidance tasks on non-sensorized links.

  • Open Access

    From CySkin to ProxySKIN: Design, Implementation and Testing of a Multi-Modal Robotic Skin for Human–Robot Interaction

    by Francesco Giovinazzo, Francesco Grella, Marco Sartore, Manuela Adami, Riccardo Galletti, Giorgio Cannata

    The Industry 5.0 paradigm has a human-centered vision of the industrial scenario and foresees a close collaboration between humans and robots. Industrial manufacturing environments must be easily adaptable to different task requirements, possibly taking into account the ergonomics and production line flexibility. Therefore, external sensing infrastructures such as cameras and motion capture systems may not be sufficient or suitable as they limit the shop floor reconfigurability and increase setup costs. In this paper, we present the technological advancements leading to the realization of ProxySKIN, a skin-like sensory system based on networks of distributed proximity sensors and tactile sensors. This technology is designed to cover large areas of the robot body and to provide a comprehensive perception of the surrounding space. ProxySKIN architecture is built on top of CySkin, a flexible artificial skin conceived to provide robots with the sense of touch, and arrays of Time-of-Flight (ToF) sensors. We provide a characterization of the arrays of proximity sensors and we motivate the design choices that lead to ProxySKIN, analyzing the effects of light interference on a ToF, due to the activity of other sensing devices. The obtained results show that a large number of proximity sensors can be embedded in our distributed sensing architecture and incorporated onto the body of a robotic platform, opening new scenarios for complex applications.


  • Open Access

    Mathematical Model and Experimental Characterization of Vertically Stacked Capacitive Tactile Sensors

    by Giulia Baldini, Marco Staiano, Francesco Grella, Mattia Frascio, Perla Maiolino, Giorgio Cannata

    Capacitive sensors are widely used in robotics for their compactness, high resolution, high sensitivity and large dynamic range. In this paper we present a design solution for the manufacturing of capacitive tactile sensors with enhanced dynamic range and sensitivity. Herein, we adopted the approach of exploiting the vertical direction of the sensors by creating stacks of capacitors. The validation of the proposed model is conducted by means of finite element simulations and the effectiveness of stacked capacitors in sub-optimal configurations has been experimentally tested by using inkjet printing and spin coating- based fabrication techniques. Results show that these sensors exhibit an enhanced dynamic range and sensitivity with respect to common single capacitors, for a given sensors area budget. Sensitivity increases of 235% passing from 1 stack to 2 stack capacitor (from 5.75 fF/kPa to 19.3 fF/kPa) and a growth of 23% from 2 stack to 3 stack capacitor (from 19.3 fF/kPa to 23.7 fF/kPa). These results suggest that the proposed methodology could be adopted for designing tactile sensors with higher spatial resolution and higher transduction sensitivity and dynamic range, in perspective of an integration over large areas.


  • Safe and Effective Collaboration With a High-Payload Robot: A Framework Integrating Novel Hardware and Software Modules

    by Antonis Sidiropoulos, Fotios Dimeas, Dimitrios Papageorgiou, Theofanis Prapavesis Semetzidis, Zoe Doulgeri, Alessandro Zanella, Francesco Grella, Keerthi Sagar, Michal Jilich, Alessandro Albini, et al.

    Human–robot collaboration has demonstrated its potential to increase efficiency and productivity in industry. However, inherently safe collaborative robots offer limited payloads and are unsuitable for many heavy lifting and manipulation tasks that would benefit from collaboration. The use of high-payload robots in physical human–robot interaction poses significant safety and performance issues due to the robots’ high inertia and power. As a result, these robots either operate autonomously, spatially separated from humans, or at very low speeds, making collaboration ineffective. In this work, we develop an integrated system that allows humans to interact with a high-payload industrial robot in a safe and effective manner. By combining sensorized skin and perception systems to distinguish voluntary from involuntary contacts with a novel variable admittance control method, we achieve safe, stable, and efficient physical human–robot interaction. Our approach is experimentally validated by manipulating a more than 100-kg payload in a real-world scenario of car windshield inspection and preassembly from the automotive industry. In the validation experiments, we achieve faster, more flexible, more efficient, and more human-friendly execution of this task. Our work also contributes on a broader scale by paving the way for the adoption of human–robot comanipulation with high-payload robots.


  • Tactile-Based Human-Robot Collaboration: A Performance Analysis

    by Francesco Grella, Roberto Canale, Francesco Giovinazzo, Alessandro Albini, Giorgio Cannata


  • Exploiting Distributed Tactile Sensors to Drive a Robot Arm Through Obstacles

    by Alessandro Albini, Francesco Grella, Perla Maiolino, Giorgio Cannata

    Robots operating in unstructured environments must be capable of safely handling unexpected collisions with objects existing in the surrounding area, possibly without stopping the task execution. This paper proposes a tactile feedback control law allowing the robot to apply bounded contact forces in reaction to physical collisions while performing a task. As a use-case scenario, the problem of driving a robot arm through obstacles to reach a known target position in the space is considered. Intensities and locations of multiple and simultaneous contacts between the robot and the environment are detected using large area tactile sensors covering the robot body. It will be shown that the robot is capable of controlling the end-effector position and of reacting to unexpected collisions by regulating the interaction forces applied to the environment. The method has been validated on a Baxter robot partially covered with 3495 distributed tactile elements, operating in an unknown environment.