AMAbid Mansuri

Abid Mansuri

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abid Mansuri has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Random Switching Pulse Positioning-Based SVM Techniques for Six-Phase AC Drive to Spread Harmonic Spectrum

    by Abid Mansuri, Rakesh Maurya, Shaikh Mohammed Suhel, Atif Iqbal

    This article introduces novel Random Switching pulse positioning based Space Vector Modulation (RS-SVM) techniques designed for Six-Phase Asymmetrical Induction Motor (6ΦAIM) drive. To spread the harmonic spectrum across the modulation frequency, this method uses random switching of the inverter’s switches, effectively reducing noise and harmonic distortion in the stator current. To improve harmonic distribution, RS-SVM techniques employ phase-specific switching count variations without increasing the overall switching frequency or altering the carrier period. Initially, two conventional Space Vector Modulation (SVM) techniques (RSVM1 and RSVM2) were analysed. Subsequently, four novel switching sequences (RS-SVM1, RS-SVM2, RS-SVM3, and RS-SVM4) were developed to reduce stator current harmonics and spread harmonic components around the modulation frequency more effectively than the reference SVM techniques. Both simulation and experimental results, obtained from a prototype 6ΦAIM powered by Dual Three-phase Voltage Source Inverters (DTVSIs), are presented to assess the effectiveness of each technique.


  • Novel SV-PWM Strategies for Six-Phase Induction Motor Drive With Reduced Switching Losses and Common-Mode Voltage

    by Abid Mansuri, Rakesh Maurya, Shaikh Mohammed Suhel, Atif Iqbal

    This article presents new insights into space vector based pulsewidth modulation techniques for six-phase induction motor (6ΦIM) drives with a focus on reducing the amplitude of peak common-mode voltage (CMV) and inverter switching losses. Initially, two existing switching sequences (named RSVM1 and RSVM2) that provide the maximum CMV are studied. Additionally, six switching sequences are proposed in this article that reduce the amplitude of peak CMV by 66.8% compared to the existing switching sequences. Among these, two switching sequences are specifically developed to achieve minimum inverter switching losses and CMV, named 6Φ-DCMV1-A2 and 6Φ-DCMV2-A2. The proposed switching sequences are compared with the existing switching sequences to verify the reduction in CMV and inverter switching losses. All claims are validated using analytical, simulation, and experimental results. This article is accompanied by a video that captures the experimental test setup while 6Φ-CCMV1 is running on 6ΦIM.


  • Reduction of Common-Mode Voltage Using Zero Voltage Vectors in Dual Star Asymmetrical Induction Motor

    by Abid Mansuri, Rakesh Maurya, Shaikh Mohammed Suhel

    This article proposes modified carrier-based pulse width modulation techniques and space vector modulation techniques which generate the least Common-mode Voltage in dual star asymmetrical induction motor. Initially, standard sine PWM and standard zero sequence PWM techniques are studied using the SVM approach, which gives the maximum CMV (+0.5·Vdc). In the plane of dual star SVM, two pairs of zero voltage vector are characterized as maximum CMV and zero CMV, respectively. By utilizing one pair of ZVV, which offers zero CMV, four new switching patterns are proposed that reduce CMV by 66.8% compared to standard PWM techniques. These techniques provide the least CMV (+0.166·Vdc) and are easily implemented in the C-programming of controllers. One of the proposed technique (DCMV-A2) provides the least stator current distortion over the entire modulation range and switching losses when the machine is operated at 0.92 < p.f. < 1. All PWM techniques are validated through an analytical method, MATLAB Simulink model, and experimental setup of DSAIM.


  • Performance Investigation on SVPWM Sequences Based on Reduced Common-Mode Voltage in Dual Three-Phase Asymmetrical Machine

    by Abid Mansuri, Suhel Mo Shaikh, Rakesh Maurya

    This paper presents Space Vector Modulation (SVM) sequences that reduce Common-mode Voltage (CMV) in Dual Three-phase Asymmetrical Induction Motor (DTAIM). First, existing SVM techniques namely Standard SVM (SSVM) and CMV1 are studied and then, three new switching sequences CMV2, CMV3 and DCMV3 are proposed which reduce peak magnitude of CMV by 66.8% in comparison with SSVM technique. In SVM techniques, to obtain least CMV, zero vectors are usually replaced by two opposite large Active voltage Vectors (AVs) with equal time duration. In such topologies like CMV1, total six AVs are utilized to synthesize reference vector. The proposed CMV2 utilizes only five large AVs to synthesize reference vector and reduces CMV. Selection of five neighbouring AVs in proposed techniques yields reduction of harmonic flux trajectories and stator current ripple. Additionally, two more switching sequences (CMV3 and DCMV3) are developed that is related to utilization of specific zero voltage vectors in all sectors (7 and 56) and produce zero CMV. The CMV and stator current ripple are considered as performance parameters for different SVM techniques. All SVM techniques are analysed by analytical results, computer simulations, and using prototype test setup of DTAIM fed by Dual Three-phase Voltage Source Inverters (DTVSIs).


  • Analysis of Various PWM Techniques for Three-phase Asynchronous Motor

    by Abid E. Mansuri, Shaikh Mo. Suhel, Vipul N. Rajpurohit, Smriti S. Sethia

    This paper presents comparative study of various scalar Pulse Width Modulation (PWM) techniques that are utilized in three-phase drives application. In this paper, various PWM methods are analysed and implemented namely Sinusoidal PWM (SPWM), Zero Sequence PWM (ZSPWM), Conventional Space Vector Modulation (CSVM) and Discontinuous SVM (DSVM). This study includes two new switching sequences referred in this paper as DSVM 15 and Hybrid SVM (HSVM) techniques. Initially, simulation study is carried out with the help of Simulink model. This study includes the effect of different PWM techniques on stator current distortion and switching loss of inverter. Hardware implementations of all mentioned methods, with the help of STM34F407 microcontroller and the auto code generation block set called ‘WAIJUNG’, have been accomplished. Results obtain from the experimentation are compared and analysed on the basis of quality of stator current waveforms and switching losses of inverter.