Palanichamy Manikandan
Research Subjects
Palanichamy Manikandan has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Pachagoundanpalayam Nachimuthugounder Palanisamy
Department of Chemistry, Annamalai University, Annamalainagar 608002, India
3 shared publications - Sakthisharmila Palanisamy
Department of Chemistry, Bannari Amman Institute of Technology, Sathyamangalam 638401, India
3 shared publications A. Joseph Kalb (Gilboa)
Departments of Chemical Physics and Structural Biology, The Weizmann Institute of Science, Rehovot, Israel 76100, and Department of Physics, Freie University Berlin, Arnimallee 14, 14195 Berlin, Germany
1 shared publication- Alexander Schnegg
Max-Planck-Institute for Chemical Energy Conversion
1 shared publication - Anton Savitsky
Faculty of Physics, Technical University Dortmund, Dortmund, Germany
1 shared publication Balasubramani Ravindran
Department of Environmental Energy Engineering, Kyonggi University, Youngtong – Gu, Suwon 16227, Korea
1 shared publication
Latest Publications
- 17 February 2020
- Published by IWA Publishing in Journal of Water Supply: Research and Technology—AQUA
- Vol. 69 (4) , 345-354
Application of electrochemical treatment for the removal of triazine dye using aluminium electrodes
Textile effluents contain triazine-substituted reactive dyes that cause health problems such as cancer, birth defects, and hormone damage. An electrochemical process was employed effectively to degrade azo reactive dye with the aim of reducing the production of carcinogenic chemicals during biodegradation. Textile dye C.I. Reactive Red 2 (RR2), a model pollutant that contains dichloro triazine ring, was subjected to the electrocoagulation process using aluminium (Al) electrodes. A maximum of 97% of colour and 72% of chemical oxygen demand (COD) removal efficiencies were achieved and 9.5 kWh/kg dye electrical energy and 0.8 kg Al/kg dye electrode consumption were observed. The dye removal mechanism was studied by analysing the results of UV-Vis spectra of RR2 and treated samples at various time intervals during electrocoagulation. Fourier transform infrared (FTIR) spectra and energy dispersive X-ray (EDX) spectral studies were used for analysing the electrocoagulated flocs. The results indicate that in this process the dye gets removed by adsorption and there is no significant carcinogenic by-product formation during the degradation of dye.
- 17 February 2020
- Published by IWA Publishing in Journal of Water Supply: Research and Technology—AQUA
- Vol. 69 (4) , 345-354
Application of electrochemical treatment for the removal of triazine dye using aluminium electrodes
Textile effluents contain triazine-substituted reactive dyes that cause health problems such as cancer, birth defects, and hormone damage. An electrochemical process was employed effectively to degrade azo reactive dye with the aim of reducing the production of carcinogenic chemicals during biodegradation. Textile dye C.I. Reactive Red 2 (RR2), a model pollutant that contains dichloro triazine ring, was subjected to the electrocoagulation process using aluminium (Al) electrodes. A maximum of 97% of colour and 72% of chemical oxygen demand (COD) removal efficiencies were achieved and 9.5 kWh/kg dye electrical energy and 0.8 kg Al/kg dye electrode consumption were observed. The dye removal mechanism was studied by analysing the results of UV-Vis spectra of RR2 and treated samples at various time intervals during electrocoagulation. Fourier transform infrared (FTIR) spectra and energy dispersive X-ray (EDX) spectral studies were used for analysing the electrocoagulated flocs. The results indicate that in this process the dye gets removed by adsorption and there is no significant carcinogenic by-product formation during the degradation of dye.
- 1 January 2018
- Published by Elsevier in Journal of Cleaner Production
- Vol. 172, 2206-2215
Removal of benzidine based textile dye using different metal hydroxides generated in situ electrochemical treatment-A comparative study
- 1 January 2018
- Published by Elsevier in Journal of Cleaner Production
- Vol. 172, 2206-2215
Removal of benzidine based textile dye using different metal hydroxides generated in situ electrochemical treatment-A comparative study
- 1 April 2017
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 231, 160-167
A characteristic study on generation and interactive effect of electrocoagulated floc with Direct Green 1 and Reactive Red 2
- 1 April 2017
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 231, 160-167
A characteristic study on generation and interactive effect of electrocoagulated floc with Direct Green 1 and Reactive Red 2
- Open Access
- 15 April 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (56) , 27169-27180
Optimization of treatment efficiency of UV/H2O2 process on simulated textile industry wastewater
The present study involves optimization of UV/H2O2 process on a simulated dye bath effluent by varying initial H2O2 concentration, pollution load, and pH. The process was optimized by four factors and three levels of Box–Behnken design coupled with response surface methodology. During the experiment, color removal and degradation studies were also performed to ensure the treatment efficiency. The results obtained show that the color removal efficiency can be achieved within a short time due to the degradation of the structure which is more susceptible to oxidation. Then slower and gradual degradation of the simple and conjugated aromatic compounds takes place. In the first 5 min of the irradiation of the dyes, the pH value decreased from 11 to 9.5 and for another pH value decreased from 9 to 7.01. The drop in the pH value is mainly due to the formation of organic as well as inorganic acid as a degradation product. Under the optimum operating conditions such as pollution load of 64%, initial concentration of H2O2 0.6 M, initial pH 8, and treatment time of 81 min the predicted removal efficiencies are 98.77 and 86.11% for Color removal and COD removal, respectively.
- 15 April 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (56) , 27169-27180
Open AccessOptimization of treatment efficiency of UV/H2O2 process on simulated textile industry wastewater
The present study involves optimization of UV/H2O2 process on a simulated dye bath effluent by varying initial H2O2 concentration, pollution load, and pH. The process was optimized by four factors and three levels of Box–Behnken design coupled with response surface methodology. During the experiment, color removal and degradation studies were also performed to ensure the treatment efficiency. The results obtained show that the color removal efficiency can be achieved within a short time due to the degradation of the structure which is more susceptible to oxidation. Then slower and gradual degradation of the simple and conjugated aromatic compounds takes place. In the first 5 min of the irradiation of the dyes, the pH value decreased from 11 to 9.5 and for another pH value decreased from 9 to 7.01. The drop in the pH value is mainly due to the formation of organic as well as inorganic acid as a degradation product. Under the optimum operating conditions such as pollution load of 64%, initial concentration of H2O2 0.6 M, initial pH 8, and treatment time of 81 min the predicted removal efficiencies are 98.77 and 86.11% for Color removal and COD removal, respectively.
- Open Access
- 27 June 2014
- Published by Springer Nature in Applied Nanoscience
- Vol. 5 (3) , 373-378
Synthesis of nanocrystalline titanium dioxide for photodegradation treatment of remazol brown dye
- 27 June 2014
- Published by Springer Nature in Applied Nanoscience
- Vol. 5 (3) , 373-378
Open AccessSynthesis of nanocrystalline titanium dioxide for photodegradation treatment of remazol brown dye
- 12 June 2003
- Published by American Chemical Society (ACS) in Biochemistry
- Vol. 42 (25) , 7863-7870
Dynamics in the Mn2+ Binding Site in Single Crystals of Concanavalin A Revealed by High-Field EPR Spectroscopy
EPR spectroscopy at 95 GHz was used to characterize the dynamics at the Mn2+ binding site in single crystals of the saccharide-binding protein concanavalin A. The zero-field splitting (ZFS) tensor of the Mn2+ was determined from rotation patterns in the a−c and a−b crystallographic planes, acquired at room temperature and 4.5 K. The analysis of the rotation patterns showed that while at room temperature there is only one type of Mn2+ site, at low temperatures two types of Mn2+ sites, not related by any symmetry, are distinguished. The sites differ in the ZFS parameters D and E and in the orientation of the ZFS tensor with respect to the crystallographic axes. Temperature-dependent EPR measurements on a crystal oriented with its crystallographic a axis parallel to the magnetic field showed that as the temperature increases, the two well-resolved Mn2+ sextets gradually coalesce into a single sextet at room temperature. The line shape changes are characteristic of a two-site exchange. This was confirmed by simulations which gave rates in the range of 107−108 s-1 for the temperature range of 200−266 K and an activation energy of 23.8 kJ/mol. This dynamic process was attributed to a conformational equilibrium within the Mn2+ binding site which freezes into two conformations at low temperatures.
- 12 June 2003
- Published by American Chemical Society (ACS) in Biochemistry
- Vol. 42 (25) , 7863-7870
Dynamics in the Mn2+ Binding Site in Single Crystals of Concanavalin A Revealed by High-Field EPR Spectroscopy
EPR spectroscopy at 95 GHz was used to characterize the dynamics at the Mn2+ binding site in single crystals of the saccharide-binding protein concanavalin A. The zero-field splitting (ZFS) tensor of the Mn2+ was determined from rotation patterns in the a−c and a−b crystallographic planes, acquired at room temperature and 4.5 K. The analysis of the rotation patterns showed that while at room temperature there is only one type of Mn2+ site, at low temperatures two types of Mn2+ sites, not related by any symmetry, are distinguished. The sites differ in the ZFS parameters D and E and in the orientation of the ZFS tensor with respect to the crystallographic axes. Temperature-dependent EPR measurements on a crystal oriented with its crystallographic a axis parallel to the magnetic field showed that as the temperature increases, the two well-resolved Mn2+ sextets gradually coalesce into a single sextet at room temperature. The line shape changes are characteristic of a two-site exchange. This was confirmed by simulations which gave rates in the range of 107−108 s-1 for the temperature range of 200−266 K and an activation energy of 23.8 kJ/mol. This dynamic process was attributed to a conformational equilibrium within the Mn2+ binding site which freezes into two conformations at low temperatures.