Anxu Sheng
Anxu Sheng has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Juan Liu
Peking University
14 shared publications Xiaoxu Li
8 shared publicationsYuefei Ding
Peking University
7 shared publicationsFeng Liu
The Key Laboratory of Water and Sediment Sciences, College of Environmental Sciences and Engineering, Peking University, Beijing 100871, China
3 shared publicationsKevin M. Rosso
3 shared publications- Kevin M. Rosso
Pacific Northwest National Laboratory
3 shared publications
Latest Publications
- 9 November 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
Interaction Between Siderite and Goethite Regulates Fe(II) Speciation and Sustains Reduction Capacity
Fe(II) drives many reduction reactions in aquifers, and its reactivity is governed not merely by total abundance but also by its speciation. Siderite is a major reservoir of structural Fe(II) and frequently occurs in close proximity with goethite. But whether such close proximity effects transformation of structural Fe(II) remains unclear. This study demonstrated that coupling siderite dissolution and diffusive transport established a narrow microenvironment between siderite surface and bulk solutions, which has higher aqueous Fe(II) (Fe(II)aq) concentration and increased pH. Close proximity enables goethite to access the microenvironment and form the proton-mediated feedback interaction with siderite, promoting the formation of surface-associated Fe(II). Therefore, the surface-associated Fe(II) pool in mixed systems increased to 109.3–538.7 μM, 2.8–13.7 times higher than that in dual-chamber systems. This increase can be quantitatively predicted from siderite surface area (A) and proton activity (aH+) via a unified relationship (A·aH+0.37). The A determines the number of available reaction sites, and the aH+ governs the reaction rate. Nitrobenzene reduction experiments revealed that surface-associated Fe(II) pool sustained reduction capacity over successive reaction cycles by linking structural Fe(II) and Fe(II)aq. These findings identify interaction between siderite and goethite as an overlooked mechanism for generating a persistent surface-associated Fe(II) pool. The species distribution of Fe(II) determines the durability of abiotic natural attenuation in aquifers.
- 9 November 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
Interaction Between Siderite and Goethite Regulates Fe(II) Speciation and Sustains Reduction Capacity
Fe(II) drives many reduction reactions in aquifers, and its reactivity is governed not merely by total abundance but also by its speciation. Siderite is a major reservoir of structural Fe(II) and frequently occurs in close proximity with goethite. But whether such close proximity effects transformation of structural Fe(II) remains unclear. This study demonstrated that coupling siderite dissolution and diffusive transport established a narrow microenvironment between siderite surface and bulk solutions, which has higher aqueous Fe(II) (Fe(II)aq) concentration and increased pH. Close proximity enables goethite to access the microenvironment and form the proton-mediated feedback interaction with siderite, promoting the formation of surface-associated Fe(II). Therefore, the surface-associated Fe(II) pool in mixed systems increased to 109.3–538.7 μM, 2.8–13.7 times higher than that in dual-chamber systems. This increase can be quantitatively predicted from siderite surface area (A) and proton activity (aH+) via a unified relationship (A·aH+0.37). The A determines the number of available reaction sites, and the aH+ governs the reaction rate. Nitrobenzene reduction experiments revealed that surface-associated Fe(II) pool sustained reduction capacity over successive reaction cycles by linking structural Fe(II) and Fe(II)aq. These findings identify interaction between siderite and goethite as an overlooked mechanism for generating a persistent surface-associated Fe(II) pool. The species distribution of Fe(II) determines the durability of abiotic natural attenuation in aquifers.
- 20 June 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (29) , 20561-20572
FeS Colloids Trigger Antimony Redox Cycling, Colloid Formation, and Ultimate Fate during the Anoxic–Oxic Transition
Antimony (Sb) mobility in subsurface environments is tightly coupled to iron (Fe) geochemistry, yet the roles of ferrous sulfide (FeS) colloids in controlling Sb fate across anoxic–oxic interfaces is not well understood. Here, we systematically elucidate how FeS colloids trigger Sb redox transformation, colloidal formation, and ultimate sequestration during anoxic–oxic transition at circumneutral pH. Experiments and theoretical calculations indicate that FeS both reduce Sb(V) and promote Sb(III) oxidation, with the dominant pathway determined by system redox conditions. We identify that transient labile Fe(III) intermediates, generated during FeS oxidation, serve as the oxidants for Sb(III) oxidation. During early-stage FeS oxidation, a substantial fraction of Sb is associated with stable colloidal particles (150–350 nm) composed of FeS and newly formed ferrihydrite, underpinning a transient, colloid-facilitated transport pathway that may enhance Sb mobility. Upon complete oxidation, all colloidal Sb exists in larger aggregates (>1000 nm), thus reducing mobility. Spectroscopic analyses confirm that complete FeS oxidation results in the production of secondary Fe(III) (oxyhydr-)oxides, which sequester Sb(V) through combined surface adsorption and structural incorporation via isomorphous substitution. Collectively, this work reveals previously unrecognized multifunctionality of FeS colloids at anoxic–oxic interfaces, providing a mechanistic framework for more accurate prediction of Sb mobility and fate in FeS-rich, redox-dynamic subsurface environments.
- 20 June 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (29) , 20561-20572
FeS Colloids Trigger Antimony Redox Cycling, Colloid Formation, and Ultimate Fate during the Anoxic–Oxic Transition
Antimony (Sb) mobility in subsurface environments is tightly coupled to iron (Fe) geochemistry, yet the roles of ferrous sulfide (FeS) colloids in controlling Sb fate across anoxic–oxic interfaces is not well understood. Here, we systematically elucidate how FeS colloids trigger Sb redox transformation, colloidal formation, and ultimate sequestration during anoxic–oxic transition at circumneutral pH. Experiments and theoretical calculations indicate that FeS both reduce Sb(V) and promote Sb(III) oxidation, with the dominant pathway determined by system redox conditions. We identify that transient labile Fe(III) intermediates, generated during FeS oxidation, serve as the oxidants for Sb(III) oxidation. During early-stage FeS oxidation, a substantial fraction of Sb is associated with stable colloidal particles (150–350 nm) composed of FeS and newly formed ferrihydrite, underpinning a transient, colloid-facilitated transport pathway that may enhance Sb mobility. Upon complete oxidation, all colloidal Sb exists in larger aggregates (>1000 nm), thus reducing mobility. Spectroscopic analyses confirm that complete FeS oxidation results in the production of secondary Fe(III) (oxyhydr-)oxides, which sequester Sb(V) through combined surface adsorption and structural incorporation via isomorphous substitution. Collectively, this work reveals previously unrecognized multifunctionality of FeS colloids at anoxic–oxic interfaces, providing a mechanistic framework for more accurate prediction of Sb mobility and fate in FeS-rich, redox-dynamic subsurface environments.
- 29 March 2026
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 423, 308-319
Labile Fe(III) species control arsenic adsorption and oxidation during magnetite-solution interactions under anoxic conditions
- 29 March 2026
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 423, 308-319
Labile Fe(III) species control arsenic adsorption and oxidation during magnetite-solution interactions under anoxic conditions
- 18 November 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (47) , 25332-25343
Fe(II)-Catalyzed Transformation of Phosphate-Bearing Ferrihydrite: Mineralogical Mechanisms and Phosphate Fate
The transformation of phosphate (P)-bearing ferrihydrite is critical for regulating iron (Fe) speciation and P availability in anaerobic soils and sediments. However, the effects of low P/Fe molar ratios (<0.1) on Fe(II)-catalyzed ferrihydrite transformation and the associated fate of P remain poorly understood. Here, we systematically investigated the influence of varying P/Fe molar ratios (0-0.05) and P incorporation modes (adsorption vs coprecipitation) on the Fe(II)-catalyzed transformation of dispersed and aggregated ferrihydrite and evaluated the resulting redistribution and availability of P. As the P/Fe ratio increased from 0 to 0.01, the predominant transformation products shifted sequentially from goethite to goethite-magnetite-lepidocrocite mixture and then to lepidocrocite, while higher P loading (P/Fe = 0.05) strongly inhibited transformation. Coprecipitated P exerted stronger inhibitory effects than adsorbed P. Mechanistically, P modified transformation pathways by enhancing Fe(II) sorption, suppressing labile Fe(III) generation, and retarding Fe oxides crystallization. Compared with dispersed ferrihydrite, aggregated particles exhibited lower surface reactivity toward Fe(II), favoring magnetite and lepidocrocite formation over goethite. These mineralogical transitions substantially altered P distribution: initially confined within ferrihydrite micropores, P became homogeneously incorporated into goethite and magnetite but preferentially accumulated on lepidocrocite surfaces. Ultimately, Fe(II)-catalyzed ferrihydrite transformation promoted P occlusion within mineral matrices, substantially reducing its availability. These findings elucidate coupled Fe-P transformation pathways and provide new mechanistic insights into P stabilization under reducing conditions.
- 18 November 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (47) , 25332-25343
Fe(II)-Catalyzed Transformation of Phosphate-Bearing Ferrihydrite: Mineralogical Mechanisms and Phosphate Fate
The transformation of phosphate (P)-bearing ferrihydrite is critical for regulating iron (Fe) speciation and P availability in anaerobic soils and sediments. However, the effects of low P/Fe molar ratios (<0.1) on Fe(II)-catalyzed ferrihydrite transformation and the associated fate of P remain poorly understood. Here, we systematically investigated the influence of varying P/Fe molar ratios (0-0.05) and P incorporation modes (adsorption vs coprecipitation) on the Fe(II)-catalyzed transformation of dispersed and aggregated ferrihydrite and evaluated the resulting redistribution and availability of P. As the P/Fe ratio increased from 0 to 0.01, the predominant transformation products shifted sequentially from goethite to goethite-magnetite-lepidocrocite mixture and then to lepidocrocite, while higher P loading (P/Fe = 0.05) strongly inhibited transformation. Coprecipitated P exerted stronger inhibitory effects than adsorbed P. Mechanistically, P modified transformation pathways by enhancing Fe(II) sorption, suppressing labile Fe(III) generation, and retarding Fe oxides crystallization. Compared with dispersed ferrihydrite, aggregated particles exhibited lower surface reactivity toward Fe(II), favoring magnetite and lepidocrocite formation over goethite. These mineralogical transitions substantially altered P distribution: initially confined within ferrihydrite micropores, P became homogeneously incorporated into goethite and magnetite but preferentially accumulated on lepidocrocite surfaces. Ultimately, Fe(II)-catalyzed ferrihydrite transformation promoted P occlusion within mineral matrices, substantially reducing its availability. These findings elucidate coupled Fe-P transformation pathways and provide new mechanistic insights into P stabilization under reducing conditions.
- 17 June 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (25) , 12667-12678
Pore-Size-Dependent Kinetics and Product Distribution of Fe(II)-Catalyzed Ferrihydrite Transformation
Fe(II)-catalyzed ferrihydrite (Fh) transformation is a widely occurring biogeochemical process in the porous media of anaerobic soils and sediments, but how pore-scale spaces affect the kinetics and product distribution of Fh transformation remains poorly understood. This study investigated the transformation of Fh nanoparticle film across a continuum of sizes of pore-scale spaces created by pressing a glass bead onto the film and immersing in 2 mM and 10 mM FeSO4 at pH = 7.0. While lepidocrocite (Lp) dominated over goethite (Gt) on the static Fh film, both minerals were observed to preferentially precipitate in micropore regions adjacent to the Fh film-glass bead contact area. The natural logarithm of product formation rates decreased linearly as increasing pore height (h) from 5 to 600 μm, revealing pronounced kinetic inhibition in macropore regions. Product mineral particles in smaller pore regions exhibited reduced primary particle size (146.1 ± 57.6 nm at h = 0.11 μm) compared with those in larger pores (222.5 ± 61.8 nm at h = 561.84 μm). COMSOL-based reaction-diffusion modeling shows that rapid Fe(III)labile intermediate supply from Fe(II)-catalyzed Fh dissolution drives its localized accumulation and elevated supersaturation within confined micropores, which ultimately dictates the pore-size-dependent distribution, formation kinetics, and primary particle size of the resulting product minerals. These findings provide mechanistic insights into the dominant role of intermediate precursor supply in dictating confinement-regulated phase transformation and highlight the notable effects of micropore size on Fh transformation and element cycling in natural porous media.
- 17 June 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (25) , 12667-12678
Pore-Size-Dependent Kinetics and Product Distribution of Fe(II)-Catalyzed Ferrihydrite Transformation
Fe(II)-catalyzed ferrihydrite (Fh) transformation is a widely occurring biogeochemical process in the porous media of anaerobic soils and sediments, but how pore-scale spaces affect the kinetics and product distribution of Fh transformation remains poorly understood. This study investigated the transformation of Fh nanoparticle film across a continuum of sizes of pore-scale spaces created by pressing a glass bead onto the film and immersing in 2 mM and 10 mM FeSO4 at pH = 7.0. While lepidocrocite (Lp) dominated over goethite (Gt) on the static Fh film, both minerals were observed to preferentially precipitate in micropore regions adjacent to the Fh film-glass bead contact area. The natural logarithm of product formation rates decreased linearly as increasing pore height (h) from 5 to 600 μm, revealing pronounced kinetic inhibition in macropore regions. Product mineral particles in smaller pore regions exhibited reduced primary particle size (146.1 ± 57.6 nm at h = 0.11 μm) compared with those in larger pores (222.5 ± 61.8 nm at h = 561.84 μm). COMSOL-based reaction-diffusion modeling shows that rapid Fe(III)labile intermediate supply from Fe(II)-catalyzed Fh dissolution drives its localized accumulation and elevated supersaturation within confined micropores, which ultimately dictates the pore-size-dependent distribution, formation kinetics, and primary particle size of the resulting product minerals. These findings provide mechanistic insights into the dominant role of intermediate precursor supply in dictating confinement-regulated phase transformation and highlight the notable effects of micropore size on Fh transformation and element cycling in natural porous media.
- 4 December 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (50) , 22148-22158
Triplet-Excited Riboflavin Promotes Labile Fe(III) Accumulation and Changes Mineralization Pathways in Fe(II)-Catalyzed Ferrihydrite Transformation
Flavins are well-known endogenous electron shuttles that facilitate long-distance extracellular electron transfer in dissimilatory iron reduction (DIR), but the effects of their photosensitivity on DIR and the transformation of metastable iron (oxyhydr)oxides like ferrihydrite (Fh) remain underexplored. This study compared the kinetics, pathways, and products of Fh transformation catalyzed by aqueous Fe(II) (Fe(II)aq) in the presence of oxidized riboflavin (RFox) at pH 7 under both dark and light conditions. While RFox has a negligible impact on Fe(II)-catalyzed Fh transformation in the dark, its photoexcited triplet state (3RF*) can significantly accelerate interfacial electron transfer (IET) from Fe(II)aq to Fh, increasing the reductive dissolution rate of Fh and boosting the accumulation rate of the key intermediate labile Fe(III) (Fe(III)labile) from 14.2 μM·h-1 to 35.6 μM·h-1. The 3RF*-promoted Fe(II)-Fh IET favors the oxolation of Fe(III)labile to lepidocrocite (Lp) over goethite (Gt) formation during Fh transformation and promotes the subsequent conversion of Lp to magnetite (Mt), altering the mineral products from sole Gt to a mixture of Lp (24.1%), Gt (45.4%), and Mt (30.5%). These findings highlight the notable effects of riboflavin as a photosensitizer on Fh biotransformation, with implications for microbial respiration and elemental cycling in natural environments.
- 4 December 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (50) , 22148-22158
Triplet-Excited Riboflavin Promotes Labile Fe(III) Accumulation and Changes Mineralization Pathways in Fe(II)-Catalyzed Ferrihydrite Transformation
Flavins are well-known endogenous electron shuttles that facilitate long-distance extracellular electron transfer in dissimilatory iron reduction (DIR), but the effects of their photosensitivity on DIR and the transformation of metastable iron (oxyhydr)oxides like ferrihydrite (Fh) remain underexplored. This study compared the kinetics, pathways, and products of Fh transformation catalyzed by aqueous Fe(II) (Fe(II)aq) in the presence of oxidized riboflavin (RFox) at pH 7 under both dark and light conditions. While RFox has a negligible impact on Fe(II)-catalyzed Fh transformation in the dark, its photoexcited triplet state (3RF*) can significantly accelerate interfacial electron transfer (IET) from Fe(II)aq to Fh, increasing the reductive dissolution rate of Fh and boosting the accumulation rate of the key intermediate labile Fe(III) (Fe(III)labile) from 14.2 μM·h-1 to 35.6 μM·h-1. The 3RF*-promoted Fe(II)-Fh IET favors the oxolation of Fe(III)labile to lepidocrocite (Lp) over goethite (Gt) formation during Fh transformation and promotes the subsequent conversion of Lp to magnetite (Mt), altering the mineral products from sole Gt to a mixture of Lp (24.1%), Gt (45.4%), and Mt (30.5%). These findings highlight the notable effects of riboflavin as a photosensitizer on Fh biotransformation, with implications for microbial respiration and elemental cycling in natural environments.
- 16 June 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 353
The influence of carbonate on the adsorption performance and mechanism of LDHs toward Cd and As
- 16 June 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 353
The influence of carbonate on the adsorption performance and mechanism of LDHs toward Cd and As
- 8 April 2024
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 373, 271-281
Effects of particle size and AQDS on the flow of electron equivalents between magnetite and aqueous Fe2+
- 8 April 2024
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 373, 271-281
Effects of particle size and AQDS on the flow of electron equivalents between magnetite and aqueous Fe2+
- 11 March 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 486
Long-term stabilization of arsenic-alkali residues via adjusting As redistribution and mineralogical transformation
- 11 March 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 486
Long-term stabilization of arsenic-alkali residues via adjusting As redistribution and mineralogical transformation
- Top Cited Papers
- 20 April 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (17) , 6934-6943
Fe(II)-Catalyzed Transformation of Ferrihydrite with Different Degrees of Crystallinity
Natural occurring ferrihydrite (Fh) nanoparticles have varying degrees of crystallinity, but how Fh crystallinity affects its transformation behavior remains elusive. Here, we investigated the Fe(II)-catalyzed transformation of Fh with different degrees of crystallinity (i.e., Fh-2h, Fh-12h, and Fh-85C). X-ray diffraction patterns of Fh-2h, Fh-12h, and Fh-85C exhibited two, five, and six diffraction peaks, respectively, indicating the order of crystallinity: Fh-2h < Fh-12h < Fh-85C. Fh with the lower crystallinity has a higher redox potential, corresponding to the faster Fe(II)-Fh interfacial electron transfer and Fe(III)labile production. With the increase of initial Fe(II) concentration ([Fe(II)aq]int.) from 0.2 to 5.0 mM, the transformation pathways of Fh-2h and Fh-12h change from Fh → lepidocrocite (Lp) → goethite (Gt) to Fh → Gt, but that of Fh-85C switches from Fh → Gt to Fh → magnetite (Mt). The changes are rationalized using a computational model that quantitatively describes the relationship between the free energies of formation for starting Fh and nucleation barriers of competing product phases. Gt particles from the Fh-2h transformation exhibit a broader width distribution than those from Fh-12h and Fh-85C. Uncommon hexagonal Mt nanoplates are formed from the Fh-85C transformation at [Fe(II)aq]int.= 5.0 mM. The findings are crucial to comprehensively understand the environmental behavior of Fh and other associated elements.
- 20 April 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (17) , 6934-6943
Top Cited PapersFe(II)-Catalyzed Transformation of Ferrihydrite with Different Degrees of Crystallinity
Natural occurring ferrihydrite (Fh) nanoparticles have varying degrees of crystallinity, but how Fh crystallinity affects its transformation behavior remains elusive. Here, we investigated the Fe(II)-catalyzed transformation of Fh with different degrees of crystallinity (i.e., Fh-2h, Fh-12h, and Fh-85C). X-ray diffraction patterns of Fh-2h, Fh-12h, and Fh-85C exhibited two, five, and six diffraction peaks, respectively, indicating the order of crystallinity: Fh-2h < Fh-12h < Fh-85C. Fh with the lower crystallinity has a higher redox potential, corresponding to the faster Fe(II)-Fh interfacial electron transfer and Fe(III)labile production. With the increase of initial Fe(II) concentration ([Fe(II)aq]int.) from 0.2 to 5.0 mM, the transformation pathways of Fh-2h and Fh-12h change from Fh → lepidocrocite (Lp) → goethite (Gt) to Fh → Gt, but that of Fh-85C switches from Fh → Gt to Fh → magnetite (Mt). The changes are rationalized using a computational model that quantitatively describes the relationship between the free energies of formation for starting Fh and nucleation barriers of competing product phases. Gt particles from the Fh-2h transformation exhibit a broader width distribution than those from Fh-12h and Fh-85C. Uncommon hexagonal Mt nanoplates are formed from the Fh-85C transformation at [Fe(II)aq]int.= 5.0 mM. The findings are crucial to comprehensively understand the environmental behavior of Fh and other associated elements.