Vincenzo Obiso
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vincenzo Obiso has a total of 131 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Pérez García-Pando
Barcelona Supercomputing Center (BSC), Barcelona, Spain
12 shared publications - Ronald L. Miller
NASA Goddard Institute of Space Studies, New York, NY, USA
11 shared publications - María Gonçalves Ageitos
Barcelona Supercomputing Center - Centro Nacional de Supercomputacion, Plaça Eusebi Güell, 1-3, Barcelona, Barcelona, Spain [ES
10 shared publications - Natalie Marie Mahowald
Department of Earth and Atmospheric Sciences, Cornell University, Ithaca, NY, USA
9 shared publications - David Ray Thompson
Jet Propulsion Laboratory California Institute of Technology Pasadena CA USA
8 shared publications - Longlei Li
Department of Earth and Atmospheric Sciences Cornell University Ithaca NY USA
7 shared publications
Latest Publications
- Open Access
- 2 October 2026
- Published by Wiley
Model-ready global dust mineralogy from EMIT spaceborne spectroscopy
The mineral composition of dust aerosols affects radiation, clouds, atmospheric chemistry and biogeochemical cycles, but Earth system models (ESMs) have long relied on indirect inferences of soil mineralogy because of the sparse soil measurements in dust source regions. Here, we convert soil-surface mineral mass fractions from NASA's Earth Surface Mineral Dust Source Investigation (EMIT) mission into size-resolved emitted mineralogy for four ESMs using empirical clay/silt partitioning and brittle-fragmentation emission theory. Compared with a legacy method of inferring soil mineral composition from a global atlas of soil types, EMIT-derived simulations improve the agreement of airborne and deposited iron oxides, calcite-equivalent carbonates, and kaolinite with in situ observations, while the performance for the illite-smectite group remains comparable to previous estimates. Quartz and feldspar remain poorly constrained because the EMIT instrument does not provide direct retrievals of these minerals within its visible-to-shortwave-infrared spectral range. The multi-model ensemble reveals strong regional and size-dependent mineralogical contrasts of aerosols across major dust sources. This work provides a model-ready mineralogical source dataset that combines EMIT observations with empirical and process-based constraints on mineral size distributions for studies of dust impacts on radiation, chemistry, clouds and biogeochemistry.
- 2 October 2026
- Published by Wiley
Open AccessModel-ready global dust mineralogy from EMIT spaceborne spectroscopy
The mineral composition of dust aerosols affects radiation, clouds, atmospheric chemistry and biogeochemical cycles, but Earth system models (ESMs) have long relied on indirect inferences of soil mineralogy because of the sparse soil measurements in dust source regions. Here, we convert soil-surface mineral mass fractions from NASA's Earth Surface Mineral Dust Source Investigation (EMIT) mission into size-resolved emitted mineralogy for four ESMs using empirical clay/silt partitioning and brittle-fragmentation emission theory. Compared with a legacy method of inferring soil mineral composition from a global atlas of soil types, EMIT-derived simulations improve the agreement of airborne and deposited iron oxides, calcite-equivalent carbonates, and kaolinite with in situ observations, while the performance for the illite-smectite group remains comparable to previous estimates. Quartz and feldspar remain poorly constrained because the EMIT instrument does not provide direct retrievals of these minerals within its visible-to-shortwave-infrared spectral range. The multi-model ensemble reveals strong regional and size-dependent mineralogical contrasts of aerosols across major dust sources. This work provides a model-ready mineralogical source dataset that combines EMIT observations with empirical and process-based constraints on mineral size distributions for studies of dust impacts on radiation, chemistry, clouds and biogeochemistry.
- Open Access
- 22 May 2026
- Published by American Geophysical Union (AGU) in Global Biogeochemical Cycles
- Vol. 40 (5)
Global Model Estimates of Atmospheric Al, Ca, Fe, Si, and Ti From Dust and Non‐Dust Aerosols Informed by EMIT Surface Mineralogy and Evaluated Against Observations
Atmospheric deposition of micro‐nutrients like Fe has been shown to be important for ocean biogeochemistry. The largest source of atmospheric Fe and other elements (e.g., Ca, Al, Si, and Ti) is desert dust, although there are significant non‐dust sources in some regions (e.g., combustion, sea salts, volcanoes). However, past estimates of these elements have been substantially uncertain due to limited information about the composition of the desert source regions. Here we use elemental distributions estimated from new Earth Surface Mineral Dust Source Investigation (EMIT) observations, which provide mineralogical composition at the surface of the Earth based on imaging spectroscopy measurements from the International Space Station. We focus on total elemental amounts, not on the soluble fraction. We add in other sources of these elements (anthropogenic and natural) and compare to a compilation of available surface concentration data from stations over land and from shipborne observations. The combined observational and model synthesis provides new information about the distribution and deposition of these elements. Our results suggest that the modeled distribution is similar to available observations, but discrepancies still exist in both natural desert dust regions as well as regions dominated by anthropogenic sources. Comparisons between the model estimated Ca/Al ratios and observations in some dust dominated regions suggest an underestimate of Ca/Al ratios. Global budgets for Ca, Al, Fe, Si, and Ti suggest that desert dust remains the dominant source, although volcanic and anthropogenic contributions are important in some regions. Changes in elemental distributions since preindustrial times were also estimated.
- 22 May 2026
- Published by American Geophysical Union (AGU) in Global Biogeochemical Cycles
- Vol. 40 (5)
Open AccessGlobal Model Estimates of Atmospheric Al, Ca, Fe, Si, and Ti From Dust and Non‐Dust Aerosols Informed by EMIT Surface Mineralogy and Evaluated Against Observations
Atmospheric deposition of micro‐nutrients like Fe has been shown to be important for ocean biogeochemistry. The largest source of atmospheric Fe and other elements (e.g., Ca, Al, Si, and Ti) is desert dust, although there are significant non‐dust sources in some regions (e.g., combustion, sea salts, volcanoes). However, past estimates of these elements have been substantially uncertain due to limited information about the composition of the desert source regions. Here we use elemental distributions estimated from new Earth Surface Mineral Dust Source Investigation (EMIT) observations, which provide mineralogical composition at the surface of the Earth based on imaging spectroscopy measurements from the International Space Station. We focus on total elemental amounts, not on the soluble fraction. We add in other sources of these elements (anthropogenic and natural) and compare to a compilation of available surface concentration data from stations over land and from shipborne observations. The combined observational and model synthesis provides new information about the distribution and deposition of these elements. Our results suggest that the modeled distribution is similar to available observations, but discrepancies still exist in both natural desert dust regions as well as regions dominated by anthropogenic sources. Comparisons between the model estimated Ca/Al ratios and observations in some dust dominated regions suggest an underestimate of Ca/Al ratios. Global budgets for Ca, Al, Fe, Si, and Ti suggest that desert dust remains the dominant source, although volcanic and anthropogenic contributions are important in some regions. Changes in elemental distributions since preindustrial times were also estimated.
- Open Access
- 8 April 2026
- Published by American Geophysical Union (AGU) in Journal of Advances in Modeling Earth Systems
- Vol. 18 (4)
Modeling Large Dust Aerosols in the Community Earth System Model Version 2 (CESM2)
Dust aerosols have a wide size distribution from less than 0.1 to over 100 μm and dominate Earth's atmospheric aerosol mass. However, most Earth system models (ESMs) inadequately represent dust aerosols larger than 10 μm in diameter, limiting the accuracy of the simulated dust cycle and climate impacts. Here, we introduce a new modeling framework that captures the full observed size distribution of dust aerosols, incorporating recent advances into a mineral‐resolved version of the Community ESM, while addressing known issues in previous versions. Comprehensive evaluation against diverse observations of bulk dust and component minerals demonstrates that the model reproduces the observed dust cycle across particle sizes. Incorporating the previously unrepresented large‐dust fractions substantially alters dust budget estimates, highlighting potential changes in simulated climate impacts and underscoring the importance of comprehensive size‐resolved dust modeling. Despite these advancements, uncertainties persist. Our results indicate that a size‐dependent reduction in settling velocity is required to reproduce the observed dust size distribution downwind of source regions. Specifically, in the new model, the gravitational settling velocity of dust particles larger than 10 μm in diameter must be reduced by as much as 85% to achieve agreement with observations. This empirical reduction serves as a constraint on physics‐based models of dust settling. Future developments should address misrepresented physical processes that hinder accurate modeling of the large dust aerosol transport. Expanding observational data sets covering the full‐size distribution is also essential to better constrain the dust cycle and improve the representation of dust optical properties and climate effects.
- 8 April 2026
- Published by American Geophysical Union (AGU) in Journal of Advances in Modeling Earth Systems
- Vol. 18 (4)
Open AccessModeling Large Dust Aerosols in the Community Earth System Model Version 2 (CESM2)
Dust aerosols have a wide size distribution from less than 0.1 to over 100 μm and dominate Earth's atmospheric aerosol mass. However, most Earth system models (ESMs) inadequately represent dust aerosols larger than 10 μm in diameter, limiting the accuracy of the simulated dust cycle and climate impacts. Here, we introduce a new modeling framework that captures the full observed size distribution of dust aerosols, incorporating recent advances into a mineral‐resolved version of the Community ESM, while addressing known issues in previous versions. Comprehensive evaluation against diverse observations of bulk dust and component minerals demonstrates that the model reproduces the observed dust cycle across particle sizes. Incorporating the previously unrepresented large‐dust fractions substantially alters dust budget estimates, highlighting potential changes in simulated climate impacts and underscoring the importance of comprehensive size‐resolved dust modeling. Despite these advancements, uncertainties persist. Our results indicate that a size‐dependent reduction in settling velocity is required to reproduce the observed dust size distribution downwind of source regions. Specifically, in the new model, the gravitational settling velocity of dust particles larger than 10 μm in diameter must be reduced by as much as 85% to achieve agreement with observations. This empirical reduction serves as a constraint on physics‐based models of dust settling. Future developments should address misrepresented physical processes that hinder accurate modeling of the large dust aerosol transport. Expanding observational data sets covering the full‐size distribution is also essential to better constrain the dust cycle and improve the representation of dust optical properties and climate effects.
- 6 February 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (3)
Do We Really Know by How Much Ellipsoidal Shapes Enhance the Extinction of Solar Radiation by Dust?
The climate impact of dust is still uncertain, partially due to poorly constrained dust physical and optical properties. Natural dust particles are known to have highly irregular shapes, but many models assume spheres when calculating the direct radiative effect (DRE). While the superior performance of non‐spherical shapes in remote sensing applications has been widely recognized, there has been no consensus about the importance of dust non‐sphericity in climate models. We assess the extent of the shape effect upon the dust optical properties and DRE at shortwave wavelengths within the NASA Goddard Institute for Space Studies ModelE2.1. We assume tri‐axial ellipsoids as an approximation to natural dust shapes that is suitable for model applications, and combine a widely used database of ellipsoidal single‐scattering properties with a recent shape distribution constructed from a comprehensive compilation of measurements. We find a shape‐induced enhancement of global dust extinction of , resulting in a global cooling increase of at the top of atmosphere and at the surface. The ellipsoidal shapes increase the total dust extinction per unit mass, improving our model representation of the dust optical depth compared to a semi‐observational constraint and ground‐based measurements. However, our analysis shows that the database of ellipsoidal scattering properties covers only one‐third of the observed distribution of shapes. This represents a major uncertainty in evaluating the dust shape effect in model applications.
- 6 February 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (3)
Do We Really Know by How Much Ellipsoidal Shapes Enhance the Extinction of Solar Radiation by Dust?
The climate impact of dust is still uncertain, partially due to poorly constrained dust physical and optical properties. Natural dust particles are known to have highly irregular shapes, but many models assume spheres when calculating the direct radiative effect (DRE). While the superior performance of non‐spherical shapes in remote sensing applications has been widely recognized, there has been no consensus about the importance of dust non‐sphericity in climate models. We assess the extent of the shape effect upon the dust optical properties and DRE at shortwave wavelengths within the NASA Goddard Institute for Space Studies ModelE2.1. We assume tri‐axial ellipsoids as an approximation to natural dust shapes that is suitable for model applications, and combine a widely used database of ellipsoidal single‐scattering properties with a recent shape distribution constructed from a comprehensive compilation of measurements. We find a shape‐induced enhancement of global dust extinction of , resulting in a global cooling increase of at the top of atmosphere and at the surface. The ellipsoidal shapes increase the total dust extinction per unit mass, improving our model representation of the dust optical depth compared to a semi‐observational constraint and ground‐based measurements. However, our analysis shows that the database of ellipsoidal scattering properties covers only one‐third of the observed distribution of shapes. This represents a major uncertainty in evaluating the dust shape effect in model applications.
- Open Access
- 27 January 2026
- Published by Springer Nature in Research Square
Spaceborne spectroscopy links dust source composition to atmospheric acidity and nitrate
Mineral dust influences atmospheric chemistry, air quality, and climate, yet its impacts remain uncertain due to limited knowledge of its mineral composition. Here we use novel spaceborne imaging spectroscopy of arid surfaces from NASA’s Earth Surface Mineral Dust Source Investigation (EMIT), together with a global chemistry model constrained by satellite-inverted dust emissions, to quantify how variability in the dust calcite fraction alters aerosol chemistry and optical properties. EMIT-derived, source-resolved calcite distributions substantially improve agreement with airborne observations and reveal large regional contrasts in dust alkalinity. These variations modulate the formation of secondary inorganic aerosols and shift aerosol acidity over a span of -4 to +3 pH units, which profoundly affects the solubility of iron and other trace metals that impact ecosystems upon deposition. The spatial pattern of calcite further controls the intensity and frequency of extreme nitrate formation events, particularly where mineral dust interacts with anthropogenic pollution in East Asia and the Middle East. Resulting changes in single scattering albedo are small and remain secondary to the much larger radiative contrasts arising from variability in iron-oxide absorption. These findings identify dust alkalinity as a dominant, previously underconstrained driver of atmospheric acidity and heterogeneous chemistry, highlighting the need to represent real-world mineral heterogeneity in global models of air quality and climate.
- 27 January 2026
- Published by Springer Nature in Research Square
Open AccessSpaceborne spectroscopy links dust source composition to atmospheric acidity and nitrate
Mineral dust influences atmospheric chemistry, air quality, and climate, yet its impacts remain uncertain due to limited knowledge of its mineral composition. Here we use novel spaceborne imaging spectroscopy of arid surfaces from NASA’s Earth Surface Mineral Dust Source Investigation (EMIT), together with a global chemistry model constrained by satellite-inverted dust emissions, to quantify how variability in the dust calcite fraction alters aerosol chemistry and optical properties. EMIT-derived, source-resolved calcite distributions substantially improve agreement with airborne observations and reveal large regional contrasts in dust alkalinity. These variations modulate the formation of secondary inorganic aerosols and shift aerosol acidity over a span of -4 to +3 pH units, which profoundly affects the solubility of iron and other trace metals that impact ecosystems upon deposition. The spatial pattern of calcite further controls the intensity and frequency of extreme nitrate formation events, particularly where mineral dust interacts with anthropogenic pollution in East Asia and the Middle East. Resulting changes in single scattering albedo are small and remain secondary to the much larger radiative contrasts arising from variability in iron-oxide absorption. These findings identify dust alkalinity as a dominant, previously underconstrained driver of atmospheric acidity and heterogeneous chemistry, highlighting the need to represent real-world mineral heterogeneity in global models of air quality and climate.
- Open Access
- 24 December 2025
- Published by Wiley
Global Model Estimates of Atmospheric Al, Ca, Fe, Si, and Ti from Dust and Non-Dust Aerosols Informed by EMIT Surface Mineralogy and Evaluated Against Observations
Atmospheric deposition of micro-nutrients like Fe has been shown to be important for ocean biogeochemistry. The largest source of atmospheric Fe and other elements (e.g., Ca, Al, Si, and Ti) is desert dust, although there are significant non-dust sources in some regions. However, past estimates of these elements have been substantially uncertain due to limited information about the composition of the desert source regions. Here we use elemental distributions estimated from new Earth Surface Mineral Dust Source Investigation (EMIT) observations, which provide mineralogical composition at the surface of the Earth based on imaging spectroscopy measurements from the International Space Station. We add in other sources of these elements (anthropogenic and natural) and compare to a compilation of available surface concentration data from stations over land and from shipborne observations. Our results suggest that the modeled distribution is similar to available observations, but discrepancies still exist in both natural desert dust regions as well as regions dominated by anthropogenic sources. Global budgets for the elements Ca, Al, Fe, Si, and Ti suggest that desert dust remains the dominant source for these elements but anthropogenic or volcanic sources are also important for these elements. Changes in elemental distributions since preindustrial times were also estimated.
- 24 December 2025
- Published by Wiley
Open AccessGlobal Model Estimates of Atmospheric Al, Ca, Fe, Si, and Ti from Dust and Non-Dust Aerosols Informed by EMIT Surface Mineralogy and Evaluated Against Observations
Atmospheric deposition of micro-nutrients like Fe has been shown to be important for ocean biogeochemistry. The largest source of atmospheric Fe and other elements (e.g., Ca, Al, Si, and Ti) is desert dust, although there are significant non-dust sources in some regions. However, past estimates of these elements have been substantially uncertain due to limited information about the composition of the desert source regions. Here we use elemental distributions estimated from new Earth Surface Mineral Dust Source Investigation (EMIT) observations, which provide mineralogical composition at the surface of the Earth based on imaging spectroscopy measurements from the International Space Station. We add in other sources of these elements (anthropogenic and natural) and compare to a compilation of available surface concentration data from stations over land and from shipborne observations. Our results suggest that the modeled distribution is similar to available observations, but discrepancies still exist in both natural desert dust regions as well as regions dominated by anthropogenic sources. Global budgets for the elements Ca, Al, Fe, Si, and Ti suggest that desert dust remains the dominant source for these elements but anthropogenic or volcanic sources are also important for these elements. Changes in elemental distributions since preindustrial times were also estimated.
- Open Access
- 17 November 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (22)
Dust Direct Radiative Effect Including Large Particles and Component Minerals
The direct radiative effect (DRE) of dust aerosols in Earth system models (ESMs) remains highly uncertain, largely due to inadequate representations of particle size distribution (PSD) and mineral composition. Using NASA's Earth Surface Mineral Dust Source Investigation (EMIT) soil mineralogy data and observed PSD in an ESM that resolves dust mineral composition and emitted diameters from 0.1 to 70 μm, we find a near‐neutral global dust net DRE (−0.057 W m −2 ), weaker than most previous estimates. Large dust (diameter >10 μm) contributes 30% of the global longwave dust optical depth, providing observational constraints on large‐particle abundance, and offsets 20% of the dust shortwave cooling over major source regions. Incorporation of EMIT mineralogy reduces shortwave uncertainty by more than 50%. The remaining uncertainty mainly exists in processes controlling dust abundance, particularly the poorly understood transport of large dust, and longwave optical properties, which require additional observational constraints to more accurately quantify the dust DRE.
- 17 November 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (22)
Open AccessDust Direct Radiative Effect Including Large Particles and Component Minerals
The direct radiative effect (DRE) of dust aerosols in Earth system models (ESMs) remains highly uncertain, largely due to inadequate representations of particle size distribution (PSD) and mineral composition. Using NASA's Earth Surface Mineral Dust Source Investigation (EMIT) soil mineralogy data and observed PSD in an ESM that resolves dust mineral composition and emitted diameters from 0.1 to 70 μm, we find a near‐neutral global dust net DRE (−0.057 W m −2 ), weaker than most previous estimates. Large dust (diameter >10 μm) contributes 30% of the global longwave dust optical depth, providing observational constraints on large‐particle abundance, and offsets 20% of the dust shortwave cooling over major source regions. Incorporation of EMIT mineralogy reduces shortwave uncertainty by more than 50%. The remaining uncertainty mainly exists in processes controlling dust abundance, particularly the poorly understood transport of large dust, and longwave optical properties, which require additional observational constraints to more accurately quantify the dust DRE.
- Open Access
- 27 August 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-47
Comment on egusphere-2023-1166
The composition of soil dust aerosols derives from the mineral abundances in the parent soils that vary across dust source regions. Nonetheless, Earth System Models (ESMs) have traditionally represented mineral dust as a globally homogeneous species. The growing interest in modeling dust mineralogy, facilitated by the recognized sensitivity of the dust climate impacts to composition, has motivated state-of-the-art ESMs to incorporate the mineral speciation of dust along with its effect upon the dust direct radiative effect (DRE). In this work, we enable the NASA Goddard Institute for Space Studies ModelE2.1 to calculate the shortwave (SW) DRE by accounting for the regionally varying soil mineralogy. Mineral-radiation interaction at solar wavelengths is calculated according to two alternative coupling schemes: 1) external mixing of three mineral components that are optically distinguished, one of which contains embedded iron oxides; 2) a single internal mixture of all dust minerals with a dynamic fraction of iron oxides that varies regionally and temporally. We link dust absorption to the fractional mass of iron oxides based on recent chamber measurements using natural dust aerosol samples. We show that coupled mineralogy overall enhances the scattering by dust, and thus the global cooling, compared to our control run with globally uniform composition. According to the external mixing scheme, the SW DRE at the top of atmosphere (TOA) changes from -0.25 to -0.30 W · m-2, corresponding to a change in the net DRE, including the longwave effect, from -0.08 to -0.12 W · m-2. The cooling increase is accentuated when the internal mixing scheme is configured: SW DRE at TOA becomes -0.34 W · m-2 (with a net DRE of -0.15 W · m-2). The varying composition modifies the regional distribution of single scattering albedo (SSA), whose variations in specific regions can be remarkable (above 0.03) and significantly modify the regional DRE. Evaluation against the AErosol RObotic NETwork (AERONET) shows that explicit representation of soil mineralogy and its regional variations reduces the low bias of model dust SSA, while improving the range of variability across stations and calendar months. Despite these improvements, the moderate spatio-temporal correlation with AERONET reveals remaining modeling challenges and the need for more accurate measurements of mineral fractions in soils.
- 27 August 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-47
Open AccessComment on egusphere-2023-1166
The composition of soil dust aerosols derives from the mineral abundances in the parent soils that vary across dust source regions. Nonetheless, Earth System Models (ESMs) have traditionally represented mineral dust as a globally homogeneous species. The growing interest in modeling dust mineralogy, facilitated by the recognized sensitivity of the dust climate impacts to composition, has motivated state-of-the-art ESMs to incorporate the mineral speciation of dust along with its effect upon the dust direct radiative effect (DRE). In this work, we enable the NASA Goddard Institute for Space Studies ModelE2.1 to calculate the shortwave (SW) DRE by accounting for the regionally varying soil mineralogy. Mineral-radiation interaction at solar wavelengths is calculated according to two alternative coupling schemes: 1) external mixing of three mineral components that are optically distinguished, one of which contains embedded iron oxides; 2) a single internal mixture of all dust minerals with a dynamic fraction of iron oxides that varies regionally and temporally. We link dust absorption to the fractional mass of iron oxides based on recent chamber measurements using natural dust aerosol samples. We show that coupled mineralogy overall enhances the scattering by dust, and thus the global cooling, compared to our control run with globally uniform composition. According to the external mixing scheme, the SW DRE at the top of atmosphere (TOA) changes from -0.25 to -0.30 W · m-2, corresponding to a change in the net DRE, including the longwave effect, from -0.08 to -0.12 W · m-2. The cooling increase is accentuated when the internal mixing scheme is configured: SW DRE at TOA becomes -0.34 W · m-2 (with a net DRE of -0.15 W · m-2). The varying composition modifies the regional distribution of single scattering albedo (SSA), whose variations in specific regions can be remarkable (above 0.03) and significantly modify the regional DRE. Evaluation against the AErosol RObotic NETwork (AERONET) shows that explicit representation of soil mineralogy and its regional variations reduces the low bias of model dust SSA, while improving the range of variability across stations and calendar months. Despite these improvements, the moderate spatio-temporal correlation with AERONET reveals remaining modeling challenges and the need for more accurate measurements of mineral fractions in soils.
- Open Access
- 12 May 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-51
Comment on egusphere-2022-1414
Soil dust aerosols are a key component of the climate system, as they interact with short- and long-wave radiation, alter cloud formation processes, affect atmospheric chemistry and play a role in biogeochemical cycles by providing nutrient inputs such as iron and phosphorus. The influence of dust on these processes depends on its physico-chemical properties, which far from being homogeneous, are shaped by its regionally varying mineral composition. The relative amount of minerals in dust depends on the source region and shows a large geographical variability. However, many state-of-the-art Earth System Models (ESMs), upon which climate analyses and projections rely, still consider dust mineralogy as invariant. The explicit representation of minerals in ESMs is more hindered by our limited knowledge of the global soil composition along with the resulting size-resolved airborne mineralogy than by computational constraints. In this work, we introduce an explicit mineralogy representation within the state-of-the-art atmosphere-chemistry model MONARCH. We review and compare two existing soil mineralogy datasets, which remain a source of uncertainty for dust mineralogy modelling, and provide an evaluation of multi-annual simulations against available mineralogy observations. Soil mineralogy datasets are based on measurements performed after wet sieving, which breaks the aggregates found in the parent soil. Our model predicts the emitted particle size distribution (PSD) in terms of its constituent minerals based on Brittle Fragmentation Theory (BFT), which reconstructs the emitted mineral aggregates destroyed by wet sieving. Our simulations broadly reproduce the most abundant mineral fractions, independently of the soil composition data used. Feldspars and calcite are highly sensitive to the soil mineralogy map, mainly due to the different assumptions made in each soil dataset to extrapolate a handful of soil measurements to arid and semiarid regions worldwide. For the least abundant or more difficult to determine minerals, such as the iron oxides, uncertainties in soil mineralogy yield differences in annual mean aerosol mass fractions of up to ∼100 %. Although BFT restores coarse aggregates including phyllosilicates that usually break during soil analysis, we still identify an overestimation of coarse quartz mass fractions (above 2 µm in diameter). In a dedicated experiment, we estimate the fraction of dust with undetermined composition as given by a soil map, which makes a ∼10 % of the emitted dust mass at the global scale, and can be regionally larger. Changes in the underlying soil mineralogy impact our estimates of climate-relevant variables, particularly affecting the regional variability of the single scattering albedo at solar wavelengths, or the total iron deposited over oceans. All in all, this assessment represents a baseline for future model experiments including new mineralogical maps constrained by high quality spaceborne hyperspectral measurements, such as those arising from the NASA EMIT mission.
- 12 May 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-51
Open AccessComment on egusphere-2022-1414
Soil dust aerosols are a key component of the climate system, as they interact with short- and long-wave radiation, alter cloud formation processes, affect atmospheric chemistry and play a role in biogeochemical cycles by providing nutrient inputs such as iron and phosphorus. The influence of dust on these processes depends on its physico-chemical properties, which far from being homogeneous, are shaped by its regionally varying mineral composition. The relative amount of minerals in dust depends on the source region and shows a large geographical variability. However, many state-of-the-art Earth System Models (ESMs), upon which climate analyses and projections rely, still consider dust mineralogy as invariant. The explicit representation of minerals in ESMs is more hindered by our limited knowledge of the global soil composition along with the resulting size-resolved airborne mineralogy than by computational constraints. In this work, we introduce an explicit mineralogy representation within the state-of-the-art atmosphere-chemistry model MONARCH. We review and compare two existing soil mineralogy datasets, which remain a source of uncertainty for dust mineralogy modelling, and provide an evaluation of multi-annual simulations against available mineralogy observations. Soil mineralogy datasets are based on measurements performed after wet sieving, which breaks the aggregates found in the parent soil. Our model predicts the emitted particle size distribution (PSD) in terms of its constituent minerals based on Brittle Fragmentation Theory (BFT), which reconstructs the emitted mineral aggregates destroyed by wet sieving. Our simulations broadly reproduce the most abundant mineral fractions, independently of the soil composition data used. Feldspars and calcite are highly sensitive to the soil mineralogy map, mainly due to the different assumptions made in each soil dataset to extrapolate a handful of soil measurements to arid and semiarid regions worldwide. For the least abundant or more difficult to determine minerals, such as the iron oxides, uncertainties in soil mineralogy yield differences in annual mean aerosol mass fractions of up to ∼100 %. Although BFT restores coarse aggregates including phyllosilicates that usually break during soil analysis, we still identify an overestimation of coarse quartz mass fractions (above 2 µm in diameter). In a dedicated experiment, we estimate the fraction of dust with undetermined composition as given by a soil map, which makes a ∼10 % of the emitted dust mass at the global scale, and can be regionally larger. Changes in the underlying soil mineralogy impact our estimates of climate-relevant variables, particularly affecting the regional variability of the single scattering albedo at solar wavelengths, or the total iron deposited over oceans. All in all, this assessment represents a baseline for future model experiments including new mineralogical maps constrained by high quality spaceborne hyperspectral measurements, such as those arising from the NASA EMIT mission.
- Top Cited PapersOpen Access
- 17 March 2021
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 21 (5) , 3973-4005
Quantifying the range of the dust direct radiative effect due to source mineralogy uncertainty
The large uncertainty in the mineral dust direct radiative effect (DRE) hinders projections of future climate change due to anthropogenic activity. Resolving modeled dust mineral speciation allows for spatially and temporally varying refractive indices consistent with dust aerosol composition. Here, for the first time, we quantify the range in dust DRE at the top of the atmosphere (TOA) due to current uncertainties in the surface soil mineralogical content using a dust mineral-resolving climate model. We propagate observed uncertainties in soil mineral abundances from two soil mineralogy atlases along with the optical properties of each mineral into the DRE and compare the resultant range with other sources of uncertainty across six climate models. The shortwave DRE responds region-specifically to the dust burden depending on the mineral speciation and underlying shortwave surface albedo: positively when the regionally averaged annual surface albedo is larger than 0.28 and negatively otherwise. Among all minerals examined, the shortwave TOA DRE and single scattering albedo at the 0.44–0.63 µm band are most sensitive to the fractional contribution of iron oxides to the total dust composition. The global net (shortwave plus longwave) TOA DRE is estimated to be within −0.23 to +0.35 W m−2. Approximately 97 % of this range relates to uncertainty in the soil abundance of iron oxides. Representing iron oxide with solely hematite optical properties leads to an overestimation of shortwave DRE by +0.10 W m−2 at the TOA, as goethite is not as absorbing as hematite in the shortwave spectrum range. Our study highlights the importance of iron oxides to the shortwave DRE: they have a disproportionally large impact on climate considering their small atmospheric mineral mass fractional burden (∼2 %). An improved description of iron oxides, such as those planned in the Earth Surface Mineral Dust Source Investigation (EMIT), is thus essential for more accurate estimates of the dust DRE.
- 17 March 2021
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 21 (5) , 3973-4005
Top Cited PapersOpen AccessQuantifying the range of the dust direct radiative effect due to source mineralogy uncertainty
The large uncertainty in the mineral dust direct radiative effect (DRE) hinders projections of future climate change due to anthropogenic activity. Resolving modeled dust mineral speciation allows for spatially and temporally varying refractive indices consistent with dust aerosol composition. Here, for the first time, we quantify the range in dust DRE at the top of the atmosphere (TOA) due to current uncertainties in the surface soil mineralogical content using a dust mineral-resolving climate model. We propagate observed uncertainties in soil mineral abundances from two soil mineralogy atlases along with the optical properties of each mineral into the DRE and compare the resultant range with other sources of uncertainty across six climate models. The shortwave DRE responds region-specifically to the dust burden depending on the mineral speciation and underlying shortwave surface albedo: positively when the regionally averaged annual surface albedo is larger than 0.28 and negatively otherwise. Among all minerals examined, the shortwave TOA DRE and single scattering albedo at the 0.44–0.63 µm band are most sensitive to the fractional contribution of iron oxides to the total dust composition. The global net (shortwave plus longwave) TOA DRE is estimated to be within −0.23 to +0.35 W m−2. Approximately 97 % of this range relates to uncertainty in the soil abundance of iron oxides. Representing iron oxide with solely hematite optical properties leads to an overestimation of shortwave DRE by +0.10 W m−2 at the TOA, as goethite is not as absorbing as hematite in the shortwave spectrum range. Our study highlights the importance of iron oxides to the shortwave DRE: they have a disproportionally large impact on climate considering their small atmospheric mineral mass fractional burden (∼2 %). An improved description of iron oxides, such as those planned in the Earth Surface Mineral Dust Source Investigation (EMIT), is thus essential for more accurate estimates of the dust DRE.