ASAmr Sabbah

Amr Sabbah

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amr Sabbah has a total of 170 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • ALD-Coated HfO 2 Artificial SEI Improves Wettability and Cycling Stability of Hard Carbon Anodes

    by Mohamed M. Abdelaal, Vinoth Packianathan Thangam, Amr Sabbah, Ju-Cheng Li, Wen-Chen Chien, Pakman Yiu, Masashi Kotobuki

  • Enhanced Hydrogen Storage in Metal Organic Framework/Graphene Oxide Composites: Experimental Characterization and Molecular Simulations

    by Mohamed Hammad Elsayed, Mohamed M. Elsenety, Rawan A. Al-Qahtani, Amr Sabbah, Mohamed Essalhi, Ahmed F. Saber, Danah Faisal Almalki, Kuei-Hsien Chen, Li-Chyong Chen, Mahmoud Abdelnaby

    Metal-organic frameworks (MOFs) constitute a rapidly expanding class of microporous materials. In recent years, numerous MOFs with tunable nanoporous architectures have been developed as promising candidates for natural gas and hydrogen storage. To enhance the hydrogen storage capacity of MOFs while reducing the overall cost, this study integrates MOFs with cost-effective materials that provide additional active sites for hydrogen adsorption. Here, we report the development of a composite consisting of graphene oxide (GO) and Ni-based MOF-74 (Ni-MOF-74), which combines the high surface area and functional groups of GO with the extensive porosity and open metal sites of the MOF. The Ni-MOF-74/GO composite was synthesized via an in situ growth method and extensively characterized by using transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller surface area analysis to confirm its integrated structure and porosity. Hydrogen adsorption isotherms at 77 K and up to 1 bar reveal that the Ni-MOF-74/GO composite exhibits a significantly higher H2 uptake capacity than either pristine GO or Ni-MOF-74 alone. Notably, the composite with an optimal GO loading (10 wt %) achieves the highest storage enhancement, demonstrating a synergistic effect between GO and the MOF in maximizing hydrogen adsorption. Density functional theory (DFT) and Monte Carlo simulations provided molecular-level insights, indicating that H2 molecules occupy both the microporous channels of Ni-MOF-74 and the GO surface, particularly at the Ni-MOF-74/GO interfacial regions. This hybrid framework exhibits a slightly stronger hydrogen adsorption energy (-3.34 kcal/mol) compared to Ni-MOF-74 alone (-3.25 kcal/mol), with minimal structural distortion upon H2 uptake.


  • Gold-bridged LaCo 1− x Au x O 3 perovskite nanocomposites for synergically enhanced electrochemical hydrogen storage

    by Maryam Ostadebrahim, Mohammad Qorbani, Amr Sabbah, Ying-Ren Lai, Mohammad Soleimani, Michitoshi Hayashi, Li-Chyong Chen, Kuei-Hsien Chen, Omran Moradlou

    With a dual role, Au substitution into the Co site (material modification) and uniform Au nanoparticle decoration (bridging components), 0.5% Au:LCO/GO nanocomposite yields a high hydrogen storage capacity of 2230 mAh g −1 .

  • Open Access

    Capped Vapor–Liquid–Solid Growth of Vanadium-Substituted Molybdenum Disulfide Ultrathin Films for Enhanced Photocatalytic Activity

    by Pin-Pin Huang, Mohammad Qorbani, Ying-Ti Hung, Ying-Ren Lai, Amr Sabbah, Mao-Feng Tseng, Chih-Yang Huang, Sumangaladevi Koodathil, Septia Kholimatussadiah, Mahmoud Kamal Hussien, et al.

    The exceptional and tunable physicochemical properties of 2D transition metal dichalcogenides (TMDCs) have made them model catalysts for fundamental studies and applications. Activating the inert basal plane holds the key to utilizing wafer-scale TMDCs in artificial photosynthesis. To address this challenge, we report a SiO2-capped vapor-liquid-solid (VLS) growth method that assists in substituting vanadium into the molybdenum disulfide ultrathin film and introducing sulfur vacancies to form Svac-Mo1-xVxS2. By optimizing the thickness of solid precursors and the SiO2-capping layer (membrane layer), as well as the growth temperature, we demonstrate control over the film thickness, vanadium concentration, and film uniformity. Our results reveal the presence of the V-Svac pairs, manifesting in the enhanced Svac concentration and charge density transfer among V-S-Mo atoms, with multifaceted benefits, including increasing light absorption, photoluminescence quenching, crystal structure distortion, efficient binding of CO2 or H2O on the surface, improved charge transfer/transport, and a suitable energy band diagram. Furthermore, the 2D Svac-Mo1-xVxS2 model catalyst films, with abundant V-Svac pair active sites, exhibit a stable and boosted photocatalytic CO2 reduction to CO, specifically yielding ∼5 times more than that of pristine MoS2. Our study demonstrates the origin of V-Svac pairs in host MoS2, leading to basal plane activation. This suggests a foundation for future research on pairing dopants or alloying elements with defects for efficient photocatalyst design.


  • Enabling room-temperature ferromagnetism in few-layered MoS2 films via strain engineering

    by Kai-Wei Chuang, Aswin Kumar Anbalagan, Yuan-Jhen Wong, Amr Sabbah, Ming-Hsuan Wu, Mayur Chaudhary, Kim Kisslinger, Shu-Chih Haw, Ching-Yu Chiang, Yu-Lun Chueh, et al.

    Strain engineering presents a promising pathway for modulating the physical properties of two-dimensional (2D) transition metal dichalcogenides materials. In this study, we investigate the strain-induced magnetic behavior of diamagnetic MoS2 films prepared by the DC magnetron sputtering technique. By applying +1% tensile strain to few-layered MoS2 films (∼3.5 nm), we observe the emergence of room-temperature ferromagnetism with a magnetization saturation of about ∼130 emu/cm3, in stark contrast to bulk films (∼40 nm), which remain diamagnetic under similar conditions. Raman spectroscopy reveals a pronounced reduction in the intensity and the splitting of the E′ mode in 1% strained few-layered films, indicating a possible bond elongation and symmetry breaking under tensile stress. Additionally, x-ray absorption spectroscopy at the Mo M3 edge further confirms a strain-induced electronic structure modification in few-layered films, with no corresponding shift observed in bulk counterparts. Moreover, the strain-induced magnetic and structural changes are largely reversible upon strain release. We attribute the origin of ferromagnetism in few-layered films to the combined influence of tensile strain and defect-assisted bond weakening, which facilitates crystal field transitions within the Mo 4d orbitals. These findings demonstrate that strain engineering can effectively induce and modulate magnetism in 2D materials, providing opportunities for developing strain-controlled spintronic applications.

  • Open Access

    Revealing Robust Room Temperature Ferromagnetism in Gd‐Doped Few‐Layered MoS 2 Thin Films

    by Aswin Kumar Anbalagan, Weng‐Kent Chan, Ming‐Hsuan Wu, Fang‐Chi Hu, Hsin‐Hao Chiu, Amr Sabbah, Mayur Chaudhary, Shivam Gupta, Kai‐Wei Chuang, Ashish Chhaganlal Gandhi, et al.

    2D MoS 2 holds great promise for spintronics, yet is limited by intrinsic diamagnetism. This study demonstrates inducing ferromagnetic behavior in MoS 2 films doped with 0.47% Gd, achieving an ultrahigh saturation magnetization of 454 emu/cm 3 in a few‐layered film over 11‐times higher than bulk films (40 nm). Raman spectroscopy, X‐ray photoelectron spectroscopy, X‐ray magnetic circular dichroism, and density functional theory (DFT) calculations reveal an interplay between Gd dopants and Mo, S vacancies (V 1Mo+2S ), leading to the formation of bound magnetic polarons (BMPs) that drive ferromagnetic ordering. H 2 S annealing and DFT calculations reveal that defect healing reduces the saturation magnetization by 83%. High sulfur migration barrier in few‐layered films helps preserve BMPs, thereby sustaining ferromagnetism, whereas lower migration barriers in bulk films lead to suppression. These findings highlight the synergy between Gd doping and defect engineering in achieving ultrahigh room‐temperature ferromagnetism, offering a scalable strategy for developing high‐performance 2D magnetic materials for spintronic applications.


  • Substitution-functionalized copper phthalocyanine (CuPc)/carbon nitride (g-C3N4) electrocatalysts for the simultaneous detection of 4-nitroaniline and nitrofurantoin

    by Nandini Nataraj, Dhayanantha Prabu Jaihindh, Shen-Ming Chen, Amr Sabbah, Saravanakumar Muthusamy, Sumangala Devi, Yi-Feng Lin, Agalya Mahalingam

    Functionalized copper phthalocyanine (CuPc) with electron-withdrawing groups (Cl and F) modified by graphitic carbon nitride (g-C3N4) for the sensing of 4-nitroaniline (4-NA) and nitrofurantoin (NFT).


  • Regulating COOH Intermediate via Rationally Constructed Surface‐Active Sites of Bi2WO6 for Solar‐Driven CO2‐to‐CO Production

    by Nguyen Quoc Thang, Amr Sabbah, Raghunath Putikam, Chih‐Yang Huang, Tsai‐Yu Lin, Mahmoud Kamal Hussien, Heng‐Liang Wu, Ming‐Chang Lin, Chih‐Hao Lee, Kuei‐Hsien Chen, et al.

    Solar‐driven CO2 reduction holds great promise for sustainable energy, yet the role of atomic active sites in governing intermediate formation and conversion remains poorly understood. Herein, a synergistic strategy using Ni single atoms (SAs) and surface oxygen vacancies (Ov) is reported to regulate the CO2 reduction pathway on the Bi2WO6 photocatalyst. Combining in‐situ techniques and theoretical modeling, the reaction mechanism and the structure‐activity relationship is elucidated. In‐situ X‐ray absorption spectroscopy identifies Bi and Ni as active sites, and in‐situ diffuse reflectance infrared Fourier transform spectroscopy demonstrates that adsorption of H2O and CO2 readily forms CO32− species on the Ov‐rich catalyst. Optimally balancing Ni SAs and Ov lowers the energy barrier for the formation and dehydration of a key COOH intermediate, leading to favorable CO formation and desorption. Consequently, a superior CO production efficiency of 53.49 µmol g‒1 is achieved, surpassing previous reports on Bi2WO6‐based catalysts for gas‐phase CO2 photoreduction.


  • Open Access

    Ultra-low lattice thermal conductivity driven high thermoelectric figure of merit in Sb/W co-doped GeTe

    by Khasim Saheb Bayikadi, Safdar Imam, Wei-Shen Tee, Sugumaran Kavirajan, Chiao-Yu Chang, Amr Sabbah, Fang-Yu Fu, Ting-Ran Liu, Ching-Yu Chiang, Dinesh Shukla, et al.

    Phonon scattering processes to κlat of Ge0.85Sb0.1W0.05Te: Umklapp, boundary, point-defect, stacking faults, resonant scattering, nanoprecipitates & microstructural effects. (b) κlat reduction (inset: ZT enhancement).


  • Tailoring atomically dispersed Fe-induced oxygen vacancies for highly efficient gas-phase photocatalytic CO 2 reduction and NO removal with diminished noxious byproducts

    by Nguyen Quoc Thang, Amr Sabbah, Chih-Yang Huang, Nguyen Hoang Phuong, Tsai-Yu Lin, Mahmoud Kamal Hussien, Heng-Liang Wu, Chih-I Wu, Nguyet N. T. Pham, Pham Van Viet, et al.

    This study reveals the exceptional photocatalytic performance of Fe single atom modified Bi 2 WO 6 for CO 2 reduction and NO removal, achieving high efficiency with minimal toxic byproducts.