GFGen Fu

Gen Fu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gen Fu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a Modal Selection Method for Full Strain Field Estimation

    by Gen Fu, Alexandrina Unataroiu

    Division / Sponsors: Design Engineering Division and Computers & Information In Engineering Division

  • Open Access

    Strain Response and Aerodynamic Damping of a Swirl Distortion Generator Using Computational Fluid Dynamics

    by Andrew Hayden, John Gillespie, Gen Fu, Alexandrina Unataroiu

    The need for more efficient and environmentally sustainable aircraft has been a rapidly increasing topic for research and development over the last few decades. Industry and NASA’s Glenn Research Center have been extensively testing Boundary Layer Ingestion (BLI) principles on propulsion systems. BLI has statistically shown to increase aircraft fuel efficiency by reducing overall

  • Open Access

    Effects of Tire Attributes on Aerodynamic Performance

    by Gen Fu, Alexandrina Unataroiu

    As fuel efficiency becomes more critical in auto industry, many researchers have started to investigate the aerodynamics of tires. Computational modelling currently is the major tool when evaluating tire aerodynamics, since the experiments are expensive and time consuming. As indicated by previous studies, many attributes of tires have been shown to have an impact on the tire

  • Open Access

    Simulation of Ion Current in Oxyfuel Flame Subject to an Electric Field

    by Kemu Xu, Alexandrina Unataroiu, Gen Fu, Christopher Martin

    Though it is more than a century old, oxyfuel's (or 'flame-cutting's') unparalleled performance on thick steel has rendered it an enduring favorite in shipyards, building construction, rail, defense, and countless other heavy industries. The harsh operating environment, such as the open flames and extreme heat, limit the ability of contemporary sensor suites to provide reliable


  • Open Access

    Development of a Modal Selection Method for Full Strain Field Estimation

    by Gen Fu, Alexandrina Unataroiu

    Full field response of a structure is critical for evaluating the performance of large slender machineries. Since only several discrete measurements can be acquired during operation, the data expansion method is important for the estimation of the full field responses of the large complex structure. In previous studies, modal transformation methods were mainly applied in model

  • Open Access

    Investigation on the Modelling of Tire Rotating Using Computational Fluid Dynamics

    by Gen Fu, Alexandrina Unataroiu

    Fuel efficiency is very important when designing new vehicles. There is a continuous demand for lower fuel cost to customers. During operation, the amount of available energy is consumed by aerodynamic drag and rolling resistance. According to previous studies, it is estimated that the aerodynamic drag generated from the tire and rim assembly contributes to 25% of the vehicle

  • Investigation of Tire Rotating Modeling Techniques Using Computational Fluid Dynamics

    by Gen Fu, Alexandrina Untaroiu

    Fuel efficiency becomes very important for new vehicles. Therefore, improving the aerodynamics of tires has started to receive increasing interest. While the experimental approaches are time-consuming and costly, numerical methods have been employed to investigate the air flow around tires. Rotating boundary and contact patch are important challenges in the modeling of tire aerodynamics. Therefore, majority of the current modeling approaches are simplified by neglecting the tire deformation and contact patch. In this study, a baseline computational fluid dynamics (CFD) model is created for a tire with contact patch. To generate mesh efficiently, a hybrid mesh, which combines hex elements and polyhedral elements, is used. Then, three modeling approaches (rotating wall, multiple reference frame, and sliding mesh) are compared for the modeling of tire rotation. Additionally, three different tire designs are investigated, including smooth tire, grooved tire, and grooved tire with open rim. The predicted results of the baseline model agree well with the measured data. Additionally, the hybrid mesh shows to be efficient and to generate accurate results. The CFD model tends to overpredict the drag of a rotating tire with contact patch. Sliding mesh approach generated more accurate predictions than the rotating wall and multiple reference frame approaches. For different tire designs, tire with open rim has the highest drag. It is believed that the methodology presented in this study will help in designing new tires with high aerodynamic performance.


  • Surrogate Model Based Optimization for Chevron Foil Thrust Bearing

    by Alexandrina Untaroiu, Gen Fu

    Gas foil thrust bearings have been utilized in high speed lightweight machines for many decades. These bearings are environment-friendly and capable of withstanding extreme conditions. However, there are also some challenges for foil thrust bearings at high speed conditions, such as insufficient heat dissipation and thermal management. The heat generated by viscous shearing continues to raise the temperature inside the gas film and may cause failures. Among all the methods to enhance heat dissipation, a promising passive thermal management method is modifying the top foil’s trailing edge shape. This modification will enhance the air mixing in between the bearing pads. The aim of this study is to identify the optimal design of the top foil trailing edge shape and provide a guideline for future bearing design. A 3-D computational fluid dynamics (CFD) model for a thrust foil bearing was created using ANSYS-CFX software. The trailing edge of the top foil was modified to a chevron shape. A sensitivity study was conducted to investigate the connection between the top foil trailing edge shape and the thermal conditions in the gas film. The maximum temperature inside the air gas film is selected as the output. The design of experiments (DOE) technique was used to generate the sampling points. A surrogate model was generated based on the output data by using the neural network method. The surrogate model was used together with a genetic multi-objective algorithm to minimize the maximal temperature inside the gas film and maximize the load carrying capacity. The optimal design was then compared with the baseline model. Results suggest the optimized trailing edge shape is capable of reducing the temperature inside the gas film. This optimal design approach can be used for improvements of chevron foil thrust bearing design.


  • A Computational Modelling for Hemodynamic Conditions Following Flow-Diverting Treatment in Cerebral Aneurysms

    by Gen Fu, Alexandrina Untaroiu

    Cerebral aneurysms are abnormal dilations of blood vessels within the skull that, in some cases, may rupture and bleed. The rupture of an aneurysm can cause significant bleeding into or around the brain (a stroke). Flow diverters are specially designed low porosity stents that are deployed into the parent artery to cover the neck of the aneurysm. The dense mesh-like structure of flow diverters aims at redirecting flow from the aneurysm to the parent artery and vice versa, resulting in flow stasis in the aneurysm and promoting thrombus formation conditions. The thrombosed aneurysm is then resorbed by the body’s wound healing mechanisms-the end result of which is a remodeled vessel returned to its normal physiological state. Most previous studies have been focused on correlating the hemodynamic conditions with the outcome of the flow diverters. On the other hand, the effects of the location of the stents have not been addressed. In this study, a numerical simulation of an idealized side wall aneurysm model is used to predict the hemodynamic conditions for different flow diverter stent locations. The CFD model of the aneurysm is developed based on data from the literature and the geometrical parameters are set according to the test data. Pulsatile boundary conditions are chosen according to the normal physiological conditions. The entire stent geometry is used to model the effect of the stent on the flow characteristics. The hemodynamic conditions in the aneurysm corresponding to different stent locations are compared. The results show that the average velocity and vorticity are significantly different depending on different stent locations. Marked reduction in average velocity, average vorticity, and mean wall shear stress within the aneurysm sac have been observed even in malposition cases. The results of this study can be further used to guide the deployment of the flow diverter stent in clinical application.

  • The Influence of Surface Patterning on the Thermal Properties of Textured Thrust Bearings

    by Gen Fu, Alexandrina Untaroiu

    Contact performance can be enhanced by using textured surfaces. These are also found to have influences on lubricated contacts. A procedure to find the optimal partially textured thrust bearing configuration is presented in this study. A parallel sector-pad thrust bearing is simulated by a three-dimensional (3D) computational fluid dynamics (CFD) model. The stationary surface of the bearing is textured with dimples, while the rotor surface is flat. The results of the baseline model are validated by experimental data. In this study, we compare rectangular and elliptical dimples by investigating design parameters, such as major the length of the major axis (width), the length of the minor axis (length), dimple depth, circumferential space between two dimples, radial space between two dimples, radial extent, circumferential extent are selected as design parameters. A parametric study is conducted to investigate the influence of the texture geometries and a surrogate model is created. Based on the surrogate model, a multi-objective optimization scheme is used to navigate the design space and find the optimal texture structure that provides a lower maximal temperature inside the fluid film, higher load capacity, and lower friction torque. The results show that the optimal radial extent of the texture is around 80% of the pad radial length for both cases. The optimal length of the elliptical dimples in the circumferential direction is about 30% larger than the value of the rectangular dimples. In the final optimal design, the maximal temperature reduces 1.1% and 1.3% for rectangular and elliptical dimples while the load capacities are maintained at the same level.