Bruce LeBlanc
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Bruce LeBlanc has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Axelle Viré
Delft University of Technology, Wind Energy Section, Kluyverweg 1, 2629 HS Delft, Netherlands
3 shared publications Carlos Ferreira
Wind Energy Delft University of Technology Delft South Holland Netherlands
3 shared publicationsNando Timmer
Wind Energy Section, Faculty of Aerospace Engineering, Delft University of Technology, Delft, The Netherlands
3 shared publicationsJulia Steiner
Wind Energy Section, Faculty of Aerospace Engineering, Delft University of Technology, Delft, The Netherlands
2 shared publications- Carlos Simao Ferreira
Delft University of Technology, Faculty of Aerospace Engineering, Kluyerweg 1, 2629 HS Delft, the Netherlands
1 shared publication Carlos Simão Ferreira
1 shared publication
Latest Publications
- Open Access
- 1 December 2022
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 547
Assessment through high-fidelity simulations of a low-fidelity noise prediction tool for a vertical-axis wind turbine
- 1 December 2022
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 547
Open AccessAssessment through high-fidelity simulations of a low-fidelity noise prediction tool for a vertical-axis wind turbine
- Open Access
- 14 March 2022
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 7 (2) , 573-584
Experimental study of the effect of a slat on the aerodynamic performance of a thick base airfoil
There is continuous effort to try and improve the aerodynamic performance of wind turbine blades. This experimental study focusses on the addition of a passive slat on a thick airfoil typically used in the inboard part of commercial wind turbine blades. Nine different slat configurations are considered, with both a clean and tripped main airfoil. The results are compared with the performance of the airfoil without slat, as well as the airfoil equipped with vortex generators. It is found that, when the airfoil is clean, the increase in lift-to-drag ratio due to the presence of a slat is larger than when vortex generators are used. This is also true for the tripped airfoil but only at small angles of attack. As expected, in all configurations, the presence of the slat delays flow separation and stall. Finally, for a clean airfoil and small angles of attack, the slat decreases the lift-to-drag ratio of the main airfoil only. By contrast, as the angle of attack increases, it seems that the slat changes the flow field around the main airfoil in such a way that its lift-to-drag ratio becomes larger than for the airfoil without slat. These effects are less pronounced when the airfoil is tripped. This work helps to better understand the role of a slat in improving the aerodynamics of blade sections. It can also be used to validate simulation tools in the field.
- 14 March 2022
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 7 (2) , 573-584
Open AccessExperimental study of the effect of a slat on the aerodynamic performance of a thick base airfoil
There is continuous effort to try and improve the aerodynamic performance of wind turbine blades. This experimental study focusses on the addition of a passive slat on a thick airfoil typically used in the inboard part of commercial wind turbine blades. Nine different slat configurations are considered, with both a clean and tripped main airfoil. The results are compared with the performance of the airfoil without slat, as well as the airfoil equipped with vortex generators. It is found that, when the airfoil is clean, the increase in lift-to-drag ratio due to the presence of a slat is larger than when vortex generators are used. This is also true for the tripped airfoil but only at small angles of attack. As expected, in all configurations, the presence of the slat delays flow separation and stall. Finally, for a clean airfoil and small angles of attack, the slat decreases the lift-to-drag ratio of the main airfoil only. By contrast, as the angle of attack increases, it seems that the slat changes the flow field around the main airfoil in such a way that its lift-to-drag ratio becomes larger than for the airfoil without slat. These effects are less pronounced when the airfoil is tripped. This work helps to better understand the role of a slat in improving the aerodynamics of blade sections. It can also be used to validate simulation tools in the field.
- Open Access
- 17 February 2022
- Published by Wiley in Wind Energy
- Vol. 25 (6) , 1030-1045
Estimation of blade loads for a variable pitch Vertical Axis Wind Turbine with strain gage measurements
The blade pitch of a Vertical Axis Wind Turbine can have a profound impact on the aerodynamic loading experienced by the turbine. This in turn impacts the structural loads and the performance of the machine. In order to characterize the effects of changing pitch, studies are conducted with fixed pitch offsets from a neutral pitch position in the open jet wind tunnel of TU Delft. Measurements with strain gages bonded to the turbine struts are used to estimate the normal loading of the blades. The measured behavior gives insights into the sensitivity of the turbine loading to the blade pitch angle. Aerodynamic phenomena associated with VAWTs are evident in the data including dynamic stall and blade vortex interaction. Shifting of turbine blade pitch is shown to alter the azimuthally varying normal loading, causing changes in magnitude and direction of rotor thrust. Frequency responses of the turbine and platform mounting structure are presented for rotating and fixed reference frames, respectfully. The effects of stall due to high pitch offsets is shown to excite higher per rev frequencies in both the rotor normal measurements and platform accelerations. The data sets are made available for validation of numerical models.
- 17 February 2022
- Published by Wiley in Wind Energy
- Vol. 25 (6) , 1030-1045
Open AccessEstimation of blade loads for a variable pitch Vertical Axis Wind Turbine with strain gage measurements
The blade pitch of a Vertical Axis Wind Turbine can have a profound impact on the aerodynamic loading experienced by the turbine. This in turn impacts the structural loads and the performance of the machine. In order to characterize the effects of changing pitch, studies are conducted with fixed pitch offsets from a neutral pitch position in the open jet wind tunnel of TU Delft. Measurements with strain gages bonded to the turbine struts are used to estimate the normal loading of the blades. The measured behavior gives insights into the sensitivity of the turbine loading to the blade pitch angle. Aerodynamic phenomena associated with VAWTs are evident in the data including dynamic stall and blade vortex interaction. Shifting of turbine blade pitch is shown to alter the azimuthally varying normal loading, causing changes in magnitude and direction of rotor thrust. Frequency responses of the turbine and platform mounting structure are presented for rotating and fixed reference frames, respectfully. The effects of stall due to high pitch offsets is shown to excite higher per rev frequencies in both the rotor normal measurements and platform accelerations. The data sets are made available for validation of numerical models.
- Open Access
- 18 August 2021
- Published by Wiley in Wind Energy
- Vol. 25 (2) , 313-332
Estimation of blade loads for a variable pitch vertical axis wind turbine from particle image velocimetry
- 18 August 2021
- Published by Wiley in Wind Energy
- Vol. 25 (2) , 313-332
Open AccessEstimation of blade loads for a variable pitch vertical axis wind turbine from particle image velocimetry
- Open Access
- 4 August 2021
- Published by Copernicus GmbH
- p. 1-19
Comment on wes-2021-49
There is continuous effort to try and improve the aerodynamic performance of wind turbine blades. This experimental study focusses on the addition of a passive slat on a thick airfoil typically used in the inboard part of commercial wind turbine blades. Nine different slat configurations are considered, with both a clean and tripped main airfoil. The results are compared with the performances of the airfoil without slat, as well as the airfoil equipped with vortex generators. It is found that, when the airfoil is clean, the increase in lift-to-drag ratio due to the presence of a slat is larger than when vortex generators are used. This is also true for the tripped airfoil, but only at small angles of attack. As expected, in all configurations, the presence of the slat delays flow separation and stall. Finally, for a clean airfoil and small angles of attack, the slat decreases the lift-to-drag ratio of the main airfoil only. By contrast, as the angle of attack increases, it seems that the slat changes the flow field around the main airfoil in such a way that its lift-to-drag ratio becomes larger than for the airfoil without slat. These effects are less pronounced when the airfoil is tripped. This work helps to better understand the role of slat in improving the aerodynamics of blade sections. It can also be used to validate simulation tools in the field.
- 4 August 2021
- Published by Copernicus GmbH
- p. 1-19
Open AccessComment on wes-2021-49
There is continuous effort to try and improve the aerodynamic performance of wind turbine blades. This experimental study focusses on the addition of a passive slat on a thick airfoil typically used in the inboard part of commercial wind turbine blades. Nine different slat configurations are considered, with both a clean and tripped main airfoil. The results are compared with the performances of the airfoil without slat, as well as the airfoil equipped with vortex generators. It is found that, when the airfoil is clean, the increase in lift-to-drag ratio due to the presence of a slat is larger than when vortex generators are used. This is also true for the tripped airfoil, but only at small angles of attack. As expected, in all configurations, the presence of the slat delays flow separation and stall. Finally, for a clean airfoil and small angles of attack, the slat decreases the lift-to-drag ratio of the main airfoil only. By contrast, as the angle of attack increases, it seems that the slat changes the flow field around the main airfoil in such a way that its lift-to-drag ratio becomes larger than for the airfoil without slat. These effects are less pronounced when the airfoil is tripped. This work helps to better understand the role of slat in improving the aerodynamics of blade sections. It can also be used to validate simulation tools in the field.
- Open Access
- 25 May 2021
- Published by Copernicus GmbH in EGUsphere
- Vol. 2021, 1-19
Experimental study of the effect of a slat on the aerodynamic performance of a thick base airfoil
There is continuous effort to try and improve the aerodynamic performance of wind turbine blades. This experimental study focusses on the addition of a passive slat on a thick airfoil typically used in the inboard part of commercial wind turbine blades. Nine different slat configurations are considered, with both a clean and tripped main airfoil. The results are compared with the performances of the airfoil without slat, as well as the airfoil equipped with vortex generators. It is found that, when the airfoil is clean, the increase in lift-to-drag ratio due to the presence of a slat is larger than when vortex generators are used. This is also true for the tripped airfoil, but only at small angles of attack. As expected, in all configurations, the presence of the slat delays flow separation and stall. Finally, for a clean airfoil and small angles of attack, the slat decreases the lift-to-drag ratio of the main airfoil only. By contrast, as the angle of attack increases, it seems that the slat changes the flow field around the main airfoil in such a way that its lift-to-drag ratio becomes larger than for the airfoil without slat. These effects are less pronounced when the airfoil is tripped. This work helps to better understand the role of slat in improving the aerodynamics of blade sections. It can also be used to validate simulation tools in the field.
- 25 May 2021
- Published by Copernicus GmbH in EGUsphere
- Vol. 2021, 1-19
Open AccessExperimental study of the effect of a slat on the aerodynamic performance of a thick base airfoil
There is continuous effort to try and improve the aerodynamic performance of wind turbine blades. This experimental study focusses on the addition of a passive slat on a thick airfoil typically used in the inboard part of commercial wind turbine blades. Nine different slat configurations are considered, with both a clean and tripped main airfoil. The results are compared with the performances of the airfoil without slat, as well as the airfoil equipped with vortex generators. It is found that, when the airfoil is clean, the increase in lift-to-drag ratio due to the presence of a slat is larger than when vortex generators are used. This is also true for the tripped airfoil, but only at small angles of attack. As expected, in all configurations, the presence of the slat delays flow separation and stall. Finally, for a clean airfoil and small angles of attack, the slat decreases the lift-to-drag ratio of the main airfoil only. By contrast, as the angle of attack increases, it seems that the slat changes the flow field around the main airfoil in such a way that its lift-to-drag ratio becomes larger than for the airfoil without slat. These effects are less pronounced when the airfoil is tripped. This work helps to better understand the role of slat in improving the aerodynamics of blade sections. It can also be used to validate simulation tools in the field.
- Open Access
- 1 January 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1452 (1)
Experimental characterization of H-VAWT turbine for development of a digital twin
A digital twin can be described as a digital replica of a physical asset. The use of such models is key to understanding complex loading phenomena experienced during testing of vertical axis wind turbines. Unsteady aerodynamic and structural effects such as dynamic stall and dynamically changing thrust and blade loading are difficult to predict with certainty. This leads to inefficient turbine designs or worse yet premature failures. Many of these phenomena can be better understood through scaled wind tunnel testing. The analysis of these test results is greatly improved by having a well calibrated digital twin model of the turbine. This paper discusses the methodologies used in the development of the model for a H style vertical axis wind turbine. This includes physical measurements of the as built system, updates to the models based upon experimental testing and a final correlation between test and model on a component by component as well as fully assembled system.
- 1 January 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1452 (1)
Open AccessExperimental characterization of H-VAWT turbine for development of a digital twin
A digital twin can be described as a digital replica of a physical asset. The use of such models is key to understanding complex loading phenomena experienced during testing of vertical axis wind turbines. Unsteady aerodynamic and structural effects such as dynamic stall and dynamically changing thrust and blade loading are difficult to predict with certainty. This leads to inefficient turbine designs or worse yet premature failures. Many of these phenomena can be better understood through scaled wind tunnel testing. The analysis of these test results is greatly improved by having a well calibrated digital twin model of the turbine. This paper discusses the methodologies used in the development of the model for a H style vertical axis wind turbine. This includes physical measurements of the as built system, updates to the models based upon experimental testing and a final correlation between test and model on a component by component as well as fully assembled system.
- Open Access
- 18 June 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1037 (2) , 022043
Experimental Determination of Thrust Loading of a 2-Bladed Vertical Axis Wind Turbine
- 18 June 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1037 (2) , 022043
Open AccessExperimental Determination of Thrust Loading of a 2-Bladed Vertical Axis Wind Turbine