Kameel Zuniga
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kameel Zuniga has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Marissa Nichole Rylander
Department of Biomedical Engineering, The University of Texas at Austin, Austin, TX 78712, USA
3 shared publications Marissa Nichole Rylander
Department of Biomedical Engineering, The University of Texas at Austin, Austin, TX, USA
2 shared publications- Mark Van Dyke
Department of Biomedical Engineering and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA
2 shared publications - Neda Ghousifam
AlphaRose RareLabs, 1401 Lavaca St, Austin, TX 78701, USA
2 shared publications - Robert J. Christy
United States Army Institute of Surgical Research, Fort Sam Houston, Texas
2 shared publications - Sean Brocklehurst
Department of Biomedical Engineering, The University of Texas at Austin, Austin, TX 78712, USA
2 shared publications
Latest Publications
- 28 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (6) , 4719-4730
Development and Characterization of a Collagen-Based Three-Dimensional In Vitro Model to Mimic Biofilm Formation in a Wound Bed
Current studies using in vitro biofilm culturing systems have been instrumental at elucidating wound biofilm formation but fail to account for the diverse environment that bacteria are exposed to within the host. In the current study, we recapitulated this wound biofilm microenvironment by creating a hydrogel composed of collagen, thrombin, fibrinogen, meat broth, and FBS and subsequently infected the scaffolds with UAMS-1. We characterized the material properties of the hydrogel (noninfected) and found no significant differences in the storage modulus when fibrin was added to the collagen hydrogel. When infected with UAMS-1, temporal growth and polysaccharide formation were observed through plating, SEM, and histological staining, indicative of biofilm formation. PCR analysis revealed heightened expression of adhesion-associated genes with no increase in expression of metabolic genes, indicating significant increase in the formation of a robust biofilm over time. Vancomycin was ineffective in eradicating the already-developed biofilm, whereas the total CFUs in rifampin-treated models decreased significantly compared to those in the untreated group. Although it was not significant, an increase in SCVs was observed in the rifampin-treated group, suggesting that rifampin may create a harsher environment against the Staphylococcus aureus, allowing the increase in more resistant bacteria. The persistence of an infection in our rifampin-treated 3D in vitro wound model indicates an increased similarity to the host environment compared to that of a static biofilm model.
- 28 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (6) , 4719-4730
Development and Characterization of a Collagen-Based Three-Dimensional In Vitro Model to Mimic Biofilm Formation in a Wound Bed
Current studies using in vitro biofilm culturing systems have been instrumental at elucidating wound biofilm formation but fail to account for the diverse environment that bacteria are exposed to within the host. In the current study, we recapitulated this wound biofilm microenvironment by creating a hydrogel composed of collagen, thrombin, fibrinogen, meat broth, and FBS and subsequently infected the scaffolds with UAMS-1. We characterized the material properties of the hydrogel (noninfected) and found no significant differences in the storage modulus when fibrin was added to the collagen hydrogel. When infected with UAMS-1, temporal growth and polysaccharide formation were observed through plating, SEM, and histological staining, indicative of biofilm formation. PCR analysis revealed heightened expression of adhesion-associated genes with no increase in expression of metabolic genes, indicating significant increase in the formation of a robust biofilm over time. Vancomycin was ineffective in eradicating the already-developed biofilm, whereas the total CFUs in rifampin-treated models decreased significantly compared to those in the untreated group. Although it was not significant, an increase in SCVs was observed in the rifampin-treated group, suggesting that rifampin may create a harsher environment against the Staphylococcus aureus, allowing the increase in more resistant bacteria. The persistence of an infection in our rifampin-treated 3D in vitro wound model indicates an increased similarity to the host environment compared to that of a static biofilm model.
- Open Access
- 3 May 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (9) , 4992
Development of a Static Avascular and Dynamic Vascular Human Skin Equivalent Employing Collagen/Keratin Hydrogels
One of the primary complications in generating physiologically representative skin tissue is the inability to integrate vasculature into the system, which has been shown to promote the proliferation of basal keratinocytes and consequent keratinocyte differentiation, and is necessary for mimicking representative barrier function in the skin and physiological transport properties. We created a 3D vascularized human skin equivalent (VHSE) with a dermal and epidermal layer, and compared keratinocyte differentiation (immunomarker staining), epidermal thickness (H&E staining), and barrier function (transepithelial electrical resistance (TEER) and dextran permeability) to a static, organotypic avascular HSE (AHSE). The VHSE had a significantly thicker epidermal layer and increased resistance, both an indication of increased barrier function, compared to the AHSE. The inclusion of keratin in our collagen hydrogel extracellular matrix (ECM) increased keratinocyte differentiation and barrier function, indicated by greater resistance and decreased permeability. Surprisingly, however, endothelial cells grown in a collagen/keratin extracellular environment showed increased cell growth and decreased vascular permeability, indicating a more confluent and tighter vessel compared to those grown in a pure collagen environment. The development of a novel VHSE, which incorporated physiological vasculature and a unique collagen/keratin ECM, improved barrier function, vessel development, and skin structure compared to a static AHSE model.
- 3 May 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (9) , 4992
Open AccessDevelopment of a Static Avascular and Dynamic Vascular Human Skin Equivalent Employing Collagen/Keratin Hydrogels
One of the primary complications in generating physiologically representative skin tissue is the inability to integrate vasculature into the system, which has been shown to promote the proliferation of basal keratinocytes and consequent keratinocyte differentiation, and is necessary for mimicking representative barrier function in the skin and physiological transport properties. We created a 3D vascularized human skin equivalent (VHSE) with a dermal and epidermal layer, and compared keratinocyte differentiation (immunomarker staining), epidermal thickness (H&E staining), and barrier function (transepithelial electrical resistance (TEER) and dextran permeability) to a static, organotypic avascular HSE (AHSE). The VHSE had a significantly thicker epidermal layer and increased resistance, both an indication of increased barrier function, compared to the AHSE. The inclusion of keratin in our collagen hydrogel extracellular matrix (ECM) increased keratinocyte differentiation and barrier function, indicated by greater resistance and decreased permeability. Surprisingly, however, endothelial cells grown in a collagen/keratin extracellular environment showed increased cell growth and decreased vascular permeability, indicating a more confluent and tighter vessel compared to those grown in a pure collagen environment. The development of a novel VHSE, which incorporated physiological vasculature and a unique collagen/keratin ECM, improved barrier function, vessel development, and skin structure compared to a static AHSE model.
- Open Access
- 17 February 2023
- Published by MDPI AG in Bioengineering
- Vol. 10 (2) , 265
Multilayer In Vitro Human Skin Tissue Platforms for Quantitative Burn Injury Investigation
This study presents a multilayer in vitro human skin platform to quantitatively relate predicted spatial time–temperature history with measured tissue injury response. This information is needed to elucidate high-temperature, short-duration burn injury kinetics and enables determination of relevant input parameters for computational models to facilitate treatment planning. Multilayer in vitro skin platforms were constructed using human dermal keratinocytes and fibroblasts embedded in collagen I hydrogels. After three seconds of contact with a 50–100 °C burn tip, ablation, cell death, apoptosis, and HSP70 expression were spatially measured using immunofluorescence confocal microscopy. Finite element modeling was performed using the measured thermal characteristics of skin platforms to determine the temperature distribution within platforms over time. The process coefficients for the Arrhenius thermal injury model describing tissue ablation and cell death were determined such that the predictions calculated from the time–temperature histories fit the experimental burn results. The activation energy for thermal collagen ablation and cell death was found to be significantly lower for short-duration, high-temperature burns than those found for long-duration, low-temperature burns. Analysis of results suggests that different injury mechanisms dominate at higher temperatures, necessitating burn research in the temperature ranges of interest and demonstrating the practicality of the proposed skin platform for this purpose.
- 17 February 2023
- Published by MDPI AG in Bioengineering
- Vol. 10 (2) , 265
Open AccessMultilayer In Vitro Human Skin Tissue Platforms for Quantitative Burn Injury Investigation
This study presents a multilayer in vitro human skin platform to quantitatively relate predicted spatial time–temperature history with measured tissue injury response. This information is needed to elucidate high-temperature, short-duration burn injury kinetics and enables determination of relevant input parameters for computational models to facilitate treatment planning. Multilayer in vitro skin platforms were constructed using human dermal keratinocytes and fibroblasts embedded in collagen I hydrogels. After three seconds of contact with a 50–100 °C burn tip, ablation, cell death, apoptosis, and HSP70 expression were spatially measured using immunofluorescence confocal microscopy. Finite element modeling was performed using the measured thermal characteristics of skin platforms to determine the temperature distribution within platforms over time. The process coefficients for the Arrhenius thermal injury model describing tissue ablation and cell death were determined such that the predictions calculated from the time–temperature histories fit the experimental burn results. The activation energy for thermal collagen ablation and cell death was found to be significantly lower for short-duration, high-temperature burns than those found for long-duration, low-temperature burns. Analysis of results suggests that different injury mechanisms dominate at higher temperatures, necessitating burn research in the temperature ranges of interest and demonstrating the practicality of the proposed skin platform for this purpose.
- Open Access
- 15 October 2022
- Published by MDPI AG in Bioengineering
- Vol. 9 (10) , 559
Keratin Promotes Differentiation of Keratinocytes Seeded on Collagen/Keratin Hydrogels
Keratinocytes undergo a complex process of differentiation to form the stratified stratum corneum layer of the skin. In most biomimetic skin models, a 3D hydrogel fabricated out of collagen type I is used to mimic human skin. However, native skin also contains keratin, which makes up 90% of the epidermis and is produced by the keratinocytes present. We hypothesized that the addition of keratin (KTN) in our collagen hydrogel may aid in the process of keratinocyte differentiation compared to a pure collagen hydrogel. Keratinocytes were seeded on top of a 100% collagen or 50/50 C/KTN hydrogel cultured in either calcium-free (Ca-free) or calcium+ (Ca+) media. Our study demonstrates that the addition of keratin and calcium in the media increased lysosomal activity by measuring the glucocerebrosidase (GBA) activity and lysosomal distribution length, an indication of greater keratinocyte differentiation. We also found that the presence of KTN in the hydrogel also increased the expression of involucrin, a differentiation marker, compared to a pure collagen hydrogel. We demonstrate that a combination (i.e., containing both collagen and kerateine or “C/KTN”) hydrogel was able to increase keratinocyte differentiation compared to a pure collagen hydrogel, and the addition of calcium further increased the differentiation of keratinocytes. This multi-protein hydrogel shows promise in future models or treatments to increase keratinocyte differentiation into the stratum corneum.
- 15 October 2022
- Published by MDPI AG in Bioengineering
- Vol. 9 (10) , 559
Open AccessKeratin Promotes Differentiation of Keratinocytes Seeded on Collagen/Keratin Hydrogels
Keratinocytes undergo a complex process of differentiation to form the stratified stratum corneum layer of the skin. In most biomimetic skin models, a 3D hydrogel fabricated out of collagen type I is used to mimic human skin. However, native skin also contains keratin, which makes up 90% of the epidermis and is produced by the keratinocytes present. We hypothesized that the addition of keratin (KTN) in our collagen hydrogel may aid in the process of keratinocyte differentiation compared to a pure collagen hydrogel. Keratinocytes were seeded on top of a 100% collagen or 50/50 C/KTN hydrogel cultured in either calcium-free (Ca-free) or calcium+ (Ca+) media. Our study demonstrates that the addition of keratin and calcium in the media increased lysosomal activity by measuring the glucocerebrosidase (GBA) activity and lysosomal distribution length, an indication of greater keratinocyte differentiation. We also found that the presence of KTN in the hydrogel also increased the expression of involucrin, a differentiation marker, compared to a pure collagen hydrogel. We demonstrate that a combination (i.e., containing both collagen and kerateine or “C/KTN”) hydrogel was able to increase keratinocyte differentiation compared to a pure collagen hydrogel, and the addition of calcium further increased the differentiation of keratinocytes. This multi-protein hydrogel shows promise in future models or treatments to increase keratinocyte differentiation into the stratum corneum.
- Open Access
- 7 April 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (8) , 4100
Characterization of a Human Platelet Lysate-Loaded Keratin Hydrogel for Wound Healing Applications In Vitro
One of the promising approaches to facilitate healing and regenerative capacity includes the application of growth-factor-loaded biomaterials. Human platelet lysate (hPL) derived from platelet-rich plasma through a freeze-thaw process has been used as a growth factor rich therapeutic in many regenerative applications. To provide sustained local delivery of the hPL-derived growth factors such as epidermal growth factor (EGF), the hPL can be loaded into biomaterials that do not degrade rapidly in vivo. Keratin (KSO), a strong filamentous protein found in human hair, when formulated as a hydrogel, is shown to sustain the release of drugs and promote wound healing. In the current study, we created a KSO biomaterial that spontaneously forms a hydrogel when rehydrated with hPL that is capable of controlled and sustained release of pro-regenerative molecules. Our study demonstrates that the release of hPL is controlled by changing the KSO hydrogel and hPL-loading concentrations, with hPL loading concentrations having a greater effect in changing release profiles. In addition, the 15% KSO concentration proved to form a stable hydrogel, and supported cell proliferation over 3 days without cytotoxic effects in vitro. The hPL-loaded keratin hydrogels show promise in potential applications for wound healing with the sustained release of pro-regenerative growth factors with easy tailoring of hydrogel properties.
- 7 April 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (8) , 4100
Open AccessCharacterization of a Human Platelet Lysate-Loaded Keratin Hydrogel for Wound Healing Applications In Vitro
One of the promising approaches to facilitate healing and regenerative capacity includes the application of growth-factor-loaded biomaterials. Human platelet lysate (hPL) derived from platelet-rich plasma through a freeze-thaw process has been used as a growth factor rich therapeutic in many regenerative applications. To provide sustained local delivery of the hPL-derived growth factors such as epidermal growth factor (EGF), the hPL can be loaded into biomaterials that do not degrade rapidly in vivo. Keratin (KSO), a strong filamentous protein found in human hair, when formulated as a hydrogel, is shown to sustain the release of drugs and promote wound healing. In the current study, we created a KSO biomaterial that spontaneously forms a hydrogel when rehydrated with hPL that is capable of controlled and sustained release of pro-regenerative molecules. Our study demonstrates that the release of hPL is controlled by changing the KSO hydrogel and hPL-loading concentrations, with hPL loading concentrations having a greater effect in changing release profiles. In addition, the 15% KSO concentration proved to form a stable hydrogel, and supported cell proliferation over 3 days without cytotoxic effects in vitro. The hPL-loaded keratin hydrogels show promise in potential applications for wound healing with the sustained release of pro-regenerative growth factors with easy tailoring of hydrogel properties.
- Open Access
- 1 January 2021
- Published by Taylor & Francis in International Journal of Hyperthermia
- Vol. 38 (1) , 830-845
Collagen/kerateine multi-protein hydrogels as a thermally stable extracellular matrix for 3D in vitro models
To determine whether the addition of kerateine (reduced keratin) in rat tail collagen type I hydrogels increases thermal stability and changes material properties and supports cell growth for use i...
- 1 January 2021
- Published by Taylor & Francis in International Journal of Hyperthermia
- Vol. 38 (1) , 830-845
Open AccessCollagen/kerateine multi-protein hydrogels as a thermally stable extracellular matrix for 3D in vitro models
To determine whether the addition of kerateine (reduced keratin) in rat tail collagen type I hydrogels increases thermal stability and changes material properties and supports cell growth for use i...
- 23 June 2016
- Published by Wiley in Wound Repair and Regeneration
- Vol. 24 (4) , 657-668
Ciprofloxacin‐loaded keratin hydrogels reduce infection and support healing in a porcine partial‐thickness thermal burn
Infection is a leading cause of morbidity and mortality in burn patients. Current therapies include silver‐based creams and dressings, which display limited antimicrobial effectiveness and impair healing. The need exists for a topical, point‐of‐injury antibiotic treatment that provides sustained antimicrobial activity without impeding wound repair. Fitting this description are keratin‐based hydrogels, which are fully biocompatible and support the slow‐release of antibiotics. Here we develop a porcine model of an infected partial‐thickness burn to test the effects of ciprofloxacin‐loaded keratin hydrogels on infection and wound healing. Partial‐thickness burns were inoculated with either Pseudomonas aeruginosa or Methicillin‐resistant Staphylococcus aureus, resulting in infections that persisted for >2 weeks that exceeded 105 and 106 cfu per gram of tissue, respectively. Compared to silver sulfadiazine, ciprofloxacin‐loaded keratin hydrogel treatment significantly reduced the amount of P. aeruginosa and S. aureus in the burn by >99% on days 4, 7, 11, and 15 postinjury. Further, burns treated with ciprofloxacin‐loaded keratin hydrogels exhibited similar healing patterns as uninfected burns with regards to reepithelialization, macrophage recruitment, and collagen deposition and remodeling. The ability of keratin hydrogels to deliver antibiotics to fight infection and support healing of partial‐thickness burns make them a strong candidate as a first‐line burn therapy.
- 23 June 2016
- Published by Wiley in Wound Repair and Regeneration
- Vol. 24 (4) , 657-668
Ciprofloxacin‐loaded keratin hydrogels reduce infection and support healing in a porcine partial‐thickness thermal burn
Infection is a leading cause of morbidity and mortality in burn patients. Current therapies include silver‐based creams and dressings, which display limited antimicrobial effectiveness and impair healing. The need exists for a topical, point‐of‐injury antibiotic treatment that provides sustained antimicrobial activity without impeding wound repair. Fitting this description are keratin‐based hydrogels, which are fully biocompatible and support the slow‐release of antibiotics. Here we develop a porcine model of an infected partial‐thickness burn to test the effects of ciprofloxacin‐loaded keratin hydrogels on infection and wound healing. Partial‐thickness burns were inoculated with either Pseudomonas aeruginosa or Methicillin‐resistant Staphylococcus aureus, resulting in infections that persisted for >2 weeks that exceeded 105 and 106 cfu per gram of tissue, respectively. Compared to silver sulfadiazine, ciprofloxacin‐loaded keratin hydrogel treatment significantly reduced the amount of P. aeruginosa and S. aureus in the burn by >99% on days 4, 7, 11, and 15 postinjury. Further, burns treated with ciprofloxacin‐loaded keratin hydrogels exhibited similar healing patterns as uninfected burns with regards to reepithelialization, macrophage recruitment, and collagen deposition and remodeling. The ability of keratin hydrogels to deliver antibiotics to fight infection and support healing of partial‐thickness burns make them a strong candidate as a first‐line burn therapy.