Iosif S. Paraskevas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Iosif S. Paraskevas has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Evangelos G. Papadopoulos
5 shared publications- Vasileios Vasilopoulos
Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania, Philadelphia, PA, 19104
3 shared publications - Evangelos Papadopoulos
Control Systems Lab, School of Mechanical Engineering, National Technical University of Athens, 15780 Athens, Greece
2 shared publications Alberto Medina
1 shared publicationAndré Brito
1 shared publicationAngelo Tomassini
1 shared publication
Latest Publications
- 1 April 2018
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 102, 13-26
Monopod hopping on compliant terrains
- 1 April 2018
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 102, 13-26
Monopod hopping on compliant terrains
- Open Access
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
FabSpace 2.0: A platform for application and service development based on Earth Observation data
The goal of FabSpace 2.0 project is to transform Universities to Open Innovation Centers for their corresponding region and improve their societal contribution to the socio-economic and environmental performance. For this purpose, the project provides to students, researchers, as well as to citizens or even companies, with a framework and a digital platform which gives open access to a range of geodata, i.e. Earth Observation data, but also computing and visualization tools. By this way, it is expected that the participants can work in an open co-working space, where they can interact with each other. Additionally, the participants will be assisted to assess the business aspects of any potential idea. The outcome of such an activity is the increase of possibility for participants to find a revolutionary concept, which can result to new and sustainable applications and/or services. Moreover the target group exceeds the usual Earth Observation professionals, and focuses also in professionals of other disciplines, where the use of Earth Observation data can create novel technologies.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Open AccessFabSpace 2.0: A platform for application and service development based on Earth Observation data
The goal of FabSpace 2.0 project is to transform Universities to Open Innovation Centers for their corresponding region and improve their societal contribution to the socio-economic and environmental performance. For this purpose, the project provides to students, researchers, as well as to citizens or even companies, with a framework and a digital platform which gives open access to a range of geodata, i.e. Earth Observation data, but also computing and visualization tools. By this way, it is expected that the participants can work in an open co-working space, where they can interact with each other. Additionally, the participants will be assisted to assess the business aspects of any potential idea. The outcome of such an activity is the increase of possibility for participants to find a revolutionary concept, which can result to new and sustainable applications and/or services. Moreover the target group exceeds the usual Earth Observation professionals, and focuses also in professionals of other disciplines, where the use of Earth Observation data can create novel technologies.
- 1 May 2017
- Published by Elsevier in Acta Astronautica
- Vol. 134, 1-10
Towards a standardized grasping and refuelling on-orbit servicing for geo spacecraft
- 1 May 2017
- Published by Elsevier in Acta Astronautica
- Vol. 134, 1-10
Towards a standardized grasping and refuelling on-orbit servicing for geo spacecraft
- 15 March 2017
- Published by Springer Nature
- p. 149-157
Orbital Education Platform: Introducing Orbital Robotics to Secondary Education
- 15 March 2017
- Published by Springer Nature
- p. 149-157
Orbital Education Platform: Introducing Orbital Robotics to Secondary Education
- 8 August 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1120-1125
On robotic impact docking for on orbit servicing
On-orbit servicing missions will rely on space robots; however their complexity requires prior careful studies. Among these, robotic docking is especially challenging. In this work, the robotic impact docking between two space systems is considered. The impedance properties required to design an impedance controller are studied. These properties include the ratio of the masses between the systems under impact, the relative stiffness between the bodies of each space system and the associated damping factor. The velocity of the probe tip to be commanded is calculated aiming at successful latch at first impact. Simulation results validate the proposed approach.
- 8 August 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1120-1125
On robotic impact docking for on orbit servicing
On-orbit servicing missions will rely on space robots; however their complexity requires prior careful studies. Among these, robotic docking is especially challenging. In this work, the robotic impact docking between two space systems is considered. The impedance properties required to design an impedance controller are studied. These properties include the ratio of the masses between the systems under impact, the relative stiffness between the bodies of each space system and the associated damping factor. The velocity of the probe tip to be commanded is calculated aiming at successful latch at first impact. Simulation results validate the proposed approach.
- 1 February 2016
- Published by Elsevier in Control Engineering Practice
- Vol. 47, 48-59
Parametric sensitivity and control of on-orbit manipulators during impacts using the Centre of Percussion concept
- 1 February 2016
- Published by Elsevier in Control Engineering Practice
- Vol. 47, 48-59
Parametric sensitivity and control of on-orbit manipulators during impacts using the Centre of Percussion concept
- 1 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4570-4575
Control and energy considerations for a hopping monopod on rough compliant terrains
Terrain compliance is a critical parameter for the performance of legged locomotion. In this work, a single actuator monopod robot hopping on rough compliant terrain is considered. Based on our controller for flat compliant terrains, this paper introduces the necessary modifications, which allow the robot to tackle the disturbance of small inclinations. Using the developed method, the robot is examined on its performance to traverse rough terrains, while maintaining the goals of reaching a desired height and forward velocity. As the increased compliance and inclination alter the energy requirements from the controller actuator, the Cost of Transport (CoT) index for a number of scenarios is studied. The correlation between terrain parameters and the CoT is presented, and useful conclusions, which can aid the understanding of the behavior of legged robots in realistic terrains are extracted.
- 1 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4570-4575
Control and energy considerations for a hopping monopod on rough compliant terrains
Terrain compliance is a critical parameter for the performance of legged locomotion. In this work, a single actuator monopod robot hopping on rough compliant terrain is considered. Based on our controller for flat compliant terrains, this paper introduces the necessary modifications, which allow the robot to tackle the disturbance of small inclinations. Using the developed method, the robot is examined on its performance to traverse rough terrains, while maintaining the goals of reaching a desired height and forward velocity. As the increased compliance and inclination alter the energy requirements from the controller actuator, the Cost of Transport (CoT) index for a number of scenarios is studied. The correlation between terrain parameters and the CoT is presented, and useful conclusions, which can aid the understanding of the behavior of legged robots in realistic terrains are extracted.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21530858,p. 4849-4854
Compliant terrain legged locomotion using a viscoplastic approach
Legged locomotion is a rapidly advancing area in robotics, yet still a large number of open questions exist. This work focuses on the foot-terrain interaction and its effect on the motion of a one-legged system. This interaction is usually tackled by disregarding some of the effects of ground deformation like permanent deformation and compaction. Inspired by other areas of engineering, an impact dynamics model is developed, allowing a more thorough study of the behavior during fast dynamic walking. This approach can be regarded as a viscoplastic one. The monopod controller presented in previous work is extended to cope with deformable terrains, based on energy dissipation considerations, without requiring the knowledge of the ground parameters. Simulation results prove the validity of the theory presented.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21530858,p. 4849-4854
Compliant terrain legged locomotion using a viscoplastic approach
Legged locomotion is a rapidly advancing area in robotics, yet still a large number of open questions exist. This work focuses on the foot-terrain interaction and its effect on the motion of a one-legged system. This interaction is usually tackled by disregarding some of the effects of ground deformation like permanent deformation and compaction. Inspired by other areas of engineering, an impact dynamics model is developed, allowing a more thorough study of the behavior during fast dynamic walking. This approach can be regarded as a viscoplastic one. The monopod controller presented in previous work is extended to cope with deformable terrains, based on energy dissipation considerations, without requiring the knowledge of the ground parameters. Simulation results prove the validity of the theory presented.
- 1 May 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3469-3474
On the use of the center of percussion for space manipulators during impacts
One of the most demanding tasks for a robotic servicer is capturing a target. During this task, the mechanical systems can be subject to large forces for short duration (impacts). In space servicers, these impacts may render the capturing of a target impossible without the use of undesirable fuel-consuming maneuvers. This paper presents an approach for minimizing impact reactions, using the Center of Percussion (CoP), a characteristic of rigid bodies rotating around an axis. This work generalizes and delineates the exact requirements for its use. Application of CoP in multibody systems is demonstrated using the Newton-Euler Algorithm. Implementation guidelines are discussed. Simulations of a planar space robot system, and a three-dimensional PUMA-like manipulator on a satellite base confirm the benefit of using the CoP during tasks that include impacts.
- 1 May 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3469-3474
On the use of the center of percussion for space manipulators during impacts
One of the most demanding tasks for a robotic servicer is capturing a target. During this task, the mechanical systems can be subject to large forces for short duration (impacts). In space servicers, these impacts may render the capturing of a target impossible without the use of undesirable fuel-consuming maneuvers. This paper presents an approach for minimizing impact reactions, using the Center of Percussion (CoP), a characteristic of rigid bodies rotating around an axis. This work generalizes and delineates the exact requirements for its use. Application of CoP in multibody systems is demonstrated using the Newton-Euler Algorithm. Implementation guidelines are discussed. Simulations of a planar space robot system, and a three-dimensional PUMA-like manipulator on a satellite base confirm the benefit of using the CoP during tasks that include impacts.
- 10 November 2012
- Published by Springer Nature
- p. 69-92
Miniaturization and Micro/Nanotechnology in Space Robotics
- 10 November 2012
- Published by Springer Nature
- p. 69-92
Miniaturization and Micro/Nanotechnology in Space Robotics